Key figure in Master data

Hello
I have a key figure defined in the master data info object.
Now the values of the key figure are not getting updated in the info object after running the DTP.any suggestions as to why this could be happening.
One thing i noticed is that the length of the key figure is 9 digits and in the source field it is 15 digits. Does that make a difference at all.

Hi,
Even you can maintain key figure as an attribute for master data, it wont be a problme. Define your keyfigure as an attribute for master data info object and load the master data again.
Regarding the length of the field between source and BW, it should get atleast 9 digits (I guesss).

Similar Messages

Maintain key figure in master data attribute

Hi,
For some special requirement I have maintained key figure in master data attribute but I am unable to use key figure attribute in infocube. Please help.
Thanks & regards,
Goutam

Hi,
See in the below URL...under "Customer Exit Variables in BW/BI Reports", you can have all examples about Cust Exits and Replacement Path.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy

Addition of key figure in master data attributes.

Hi All,
I have a scenario to DPO (Days payable outstanding) amount in FI.
I need to calculate purchases amount From 2LIS_O3_BF Based on the given input dates from customer .The Company code wise ACCOUNT PAYABLE amount to be calculated from OFI_AP_4.
There is no key link between this.
So i want to add one key figure in Company code attributes to calculate and store account payable amount using Routine. Then i will give this attribute as navigational in ODS of 2LIS_03_BF .
Can i have key figure in attributes of masterdata. I need to load this daily to calculate amount.
Is there any other solution, how performance will be effected with this solution.
Thanks,
JO

Hi Joseph;
Yes, you can add a KF as one attribute of master data.
The other solution that I see is you create a DSO as a target of 2LIS_03_BF and then a transformation with company code. Direct link between DS and IO is not advise because one is delta and the other is full (you could have some problems).
But if it's my choice... enhance the 0COMP_CODE_ATTR.
Regards;
Ricardo

Key Figures in Joined Data Source

Hello,
I have created some Key Figures for the Data Source "Sales Order Item". Reports based on this Data Source are working fine and also my Key Figures are displaying the right results.
Now I want to create a Joined Data Source (Left Outer Join) with the Sales Order Item and Outbound Delivery Detail Line Items. The problem I have here is, that my own Key Figures based on Sales Order Item are not showing up in the list and I cannot select them.
Does anyone know why? Do I have to create the same Key Figures again and again as soon as I want to join the Sales Order Item Data Source with any other Data Source?
Thanks for any feedback.

Key figure are not available in joining Data Sources, Characteristics of same type from different Data Source data element available in joining scenario.
Regards
Naveen

Restricted key figure not populating data

Hi Guru's,
I am facing problem with restricted keyfigure. I have restricted amount with cal year which is not populating data.
This key figure is having data in provider.
Could you let me know how to overcome this .
Thanks in advance.
Thanks,
Vijay.

Hi,
The quesry is on Multiprovider? or infoset? it matters first..... or directly on cube? check it and apply relevent infoprovider properties for logic check.
Check the global filters are there any infoprovider restrications etc...
And also while checking the datafor the KF in infoprovide " use ALL the restrictions that are in query and impact the data"
also try removing the restiction and look for data...
Hope this helps.'

The sort key in the master data G/l account and master data customer

Sort Key
Hi All,
in the master data (control data) of the G/l account XXXXXX (it's a reconciliation account) I've filled in the sort key the value ZZ1 (XBLNR).
Instead, in the master data of a certain customer which has its Reconciliation Account equal to xxxxxx, I've filled in the sort key ZZ2 (BELNR).
Posting a document, I need that the Assignment number is equal to XBLNR.
How could I obtain this?
Thanks a lot
G.

Hi,
You are assign short key with Customer master in ZZ1 (Account Management Tab Bottam).
I think it is helpful to you.
Regards,
Spradip

How to fill date key figure with system date?

Dear All,
We would like to set on specific action (button press) to assign current system date top a date key figure within our infocube.
Any idea how to achieve this?many thanks in advance for any idea!
Kind Regards
Olivier DESFOUR

Dear Khaja,
I'm not exactly using an update rule, i'm using Integrated Planning component.
Customer would like to set this key figure on user action; ie for example
user validate a step within planning process by pressing a button on workbook.
then system is stamping system date within cube.
Hope it helps
Kind regards
Olivier

Key figures are of date type

Hi,
I am working with a standard business content IC that has the key figure InfoObjects defined as type date. When I double click on the InfoObject to review the detail from tab 'Type/unit', I see that it is defined with the radio button 'Date', but the 'Data type' is 'DEC - Counter or amount field with comma and sign'. When I loaded the data to this IO, I would get a 732,163 for the value, for example.
Has anyone come across this issue before? Can I change the standrad IC to have these in the Time characteristics instead of the Key Figures? I am expecting a date value, what should I do?
Thanks
"When dealing with people, let us remember we are not dealing with creatures of logic. We are dealing with creatures of emotion, creatures bustling with prejudices and motivated by pride and vanity." ~ Dale Carnegie
"The truth may be out there, but the lies are inside your head." ~ Terry Pratchett,
"Confrontation lacks elegance and dignity, but most prefer to tell others how hateful they are toward another rather than maintaining that elegance and dignity." ~ Anonymous
"Educate yourself and get the story straight before you get confrontational, vulgar, immature, and prematurely jump into conclusion and into someone else's throat." ~ Anonymous

Hello ,
 This actually depends on ur requirment. if you want some calculation like processing time,difference.. etc.. with this Date infoObject then u have to use the Key Fig InfoObject.
 The difference between DAT and DEC is that in DEC..if the date is 13/04/2007 then it will give u number of days from 1.1.0001 that means somthing around 732,688 (current day of month =13 + April = 120 days+2007*365).
 and your DAT will take exactly with it recives yyyymmdd (20070413)
 -- Enjoy SAP
Anil Raparthi
Pls: award credits if you are satisfied with the above reply!

Suppress cumulated key figures for actual data

Hello all,
I have build a query which display monthly actual and forecast order income for an ficsal year. The fiscal year starts in July and end in June
The forecast data were loaded in BW over an flat file for the whole fiscal year. The actual data gets loaded daily from R/3.
When I run the query and select the whole fiscal year and displayed the key figures as "cumulated" in the query properties, I can see all the cumulated forecast values (for 12 months) but the actual order income data just cumulated till the current month (December). For the next months (until June) always the last value from December remains.
I want to provide a line diagram in a Web Application, which shows the forecast and the actual data. Right now the line for the actual data stops to raise at the current period and gets continued as a horizontal line till the end of the fiscal year.
Therefore my question is: Is it possible to suppress values for actual data for the next periods in order to end the actual order income data line in the diagram at the current month.
Any ideas would be great.
Best regards from Munich,
Stefan

The one thing I can think of would require a very messy way of doing things, but it would probably work.
If you created a set of calculated/restricted key figures for each period of the fiscal year (non-cumulated), you could also have a set that cumulates up to each period. Then, in the calculation, you can set the stipulation that if period x is not > 0, then don't sum that particular colum. Then, supress columns that don't have any data in the structure properties. I think you'd end up with 24 columns, 12 hidden, and some that won't display depending on which values exist.

To add a key field to master data

Hi Gurus,
I have 0UC_DEVICE as my time dependant master data.
It has two key fields(device number and todate).
I have to add from date also as a keyfield to this master data.
Can some one help me in this?
points will be assigned for helpfull answers.
Regards,
Senoy

Hi,
You can add other Key Field to your master by insetting it as a compounding characteristics. Before that couple of points needs to be taken care off.
1. Delete the data from Master. As you are adding a Key to master, it will not allow it unless you delete the complete data from master.
2. Also delete the master data from Quality, Production systems etc... to make this transport successful.
Regards,
Yogesh.

Description is showing for blank key values in master data

Hello experts,
I have loaded master data text. In general the first record of master data will be blank. But my case its showing description (short, medium) for blank key value.
Could any one help me in this matter?
Thanks
Prathap

Hello,
Did you check the data source for this in the source system and check in RSA3 or in the underlying tables if anything like that is mainatained...if its a full load then the same thing may get loaded again even if you have changed it in BW.
May be you can try to write a condition in the update rules on not to load the records with blank keys.
If there is no such records in the source system then you can change the master data in the BW and make the text as blank.
Thanks
Ajeet

Summing up key figure in Cube - data load from ODS

Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field   quantity
123                301          10
123                302           20
123                303           30
Expected record in Cube
Header-field       Quantity
   123                    60
====================
Regards,
Pramod.

Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod.

Supress Key figure if no data

I'm needing to supress a KF on a workbook or from within the query if no data is found for that key figure.
Any help will be awarded.
Thanks

Hi,
The last option: VBA in workbook:
Re: Display ' - ' instead of empty cell
Best regards,
Eugene

Conditions: Variables on date key figures

Dear Sirs,
I am trying to create a condition on a key figure of type date (subtype: dats). I want the user to select a date interval for this condition, using variables.
The problems seems to be that the variable input screen thinks the user should enter an amount and not a date. If I enter a date in the variable then no data is beeing displayed.
So how can I get the variable to understand that the input is a date ?
Has anyone done what I try to do sucessfully.

Hello Rakesh,
thanks for your input. However, I am not able to get it to work.
I create a condition on the key figure "date". I use e.g greater than. Then create a variable with replacement path to 0CALDAY, and transfer the condition.
When I run the report I get the following error.
Termination message sent
ABEND BRAIN (418): Variable VAR_20080128112329 (D2LEOFV2P3JFW0YWPGXBKJ53A) does not exist or is incorrectly used 4 D2LENS95OIB2G5DTW28S323D2
MSGV1: VAR_20080128112329
MSGV2: D2LEOFV2P3JFW0YWPGXBKJ53A
MSGV3: 4
MSGV4: D2LENS95OIB2G5DTW28S323D2
Have you managed to solve the excact same requirement?
regards,
Jørgen

How to use exception for a Date Key Figure

Hello All,
I have the following requirement.
1. I have a Key Figure which is Date Type.
2. I need to color the cell to green if the it is filled with date otherwise leave it as it is.
Please suggest how to overcome it.
Thanks & Regards,
Rajib

hi,
Your requirement is not clear, you have the below setup
I have the following requirement.
1. I have a Key Figure which is Date Type.
How can a KF be of date type, or is it the value of a date characteristic that you have extracted in KF using formula variable. If yes you just need to define exception for the value greater than 0.
regards,
Arvind.

Key figure in Master data

Similar Messages

Maybe you are looking for