Key Figures in Joined Data Source
Hello,
I have created some Key Figures for the Data Source "Sales Order Item". Reports based on this Data Source are working fine and also my Key Figures are displaying the right results.
Now I want to create a Joined Data Source (Left Outer Join) with the Sales Order Item and Outbound Delivery Detail Line Items. The problem I have here is, that my own Key Figures based on Sales Order Item are not showing up in the list and I cannot select them.
Does anyone know why? Do I have to create the same Key Figures again and again as soon as I want to join the Sales Order Item Data Source with any other Data Source?
Thanks for any feedback.
Key figure are not available in joining Data Sources, Characteristics of same type from different Data Source data element available in joining scenario.
Regards
Naveen
Similar Messages
-
Restricted key figure not populating data
Hi Guru's,
I am facing problem with restricted keyfigure. I have restricted amount with cal year which is not populating data.
This key figure is having data in provider.
Could you let me know how to overcome this .
Thanks in advance.
Thanks,
Vijay.Hi,
The quesry is on Multiprovider? or infoset? it matters first..... or directly on cube? check it and apply relevent infoprovider properties for logic check.
Check the global filters are there any infoprovider restrications etc...
And also while checking the datafor the KF in infoprovide " use ALL the restrictions that are in query and impact the data"
also try removing the restiction and look for data...
Hope this helps.' -
Maintain key figure in master data attribute
Hi,
For some special requirement I have maintained key figure in master data attribute but I am unable to use key figure attribute in infocube. Please help.
Thanks & regards,
GoutamHi,
See in the below URL...under "Customer Exit Variables in BW/BI Reports", you can have all examples about Cust Exits and Replacement Path.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy -
Hello
I have a key figure defined in the master data info object.
Now the values of the key figure are not getting updated in the info object after running the DTP.any suggestions as to why this could be happening.
One thing i noticed is that the length of the key figure is 9 digits and in the source field it is 15 digits. Does that make a difference at all.Hi,
Even you can maintain key figure as an attribute for master data, it wont be a problme. Define your keyfigure as an attribute for master data info object and load the master data again.
Regarding the length of the field between source and BW, it should get atleast 9 digits (I guesss). -
Addition of key figure in master data attributes.
Hi All,
I have a scenario to DPO (Days payable outstanding) amount in FI.
I need to calculate purchases amount From 2LIS_O3_BF Based on the given input dates from customer .The Company code wise ACCOUNT PAYABLE amount to be calculated from OFI_AP_4.
There is no key link between this.
So i want to add one key figure in Company code attributes to calculate and store account payable amount using Routine. Then i will give this attribute as navigational in ODS of 2LIS_03_BF .
Can i have key figure in attributes of masterdata. I need to load this daily to calculate amount.
Is there any other solution, how performance will be effected with this solution.
Thanks,
JOHi Joseph;
Yes, you can add a KF as one attribute of master data.
The other solution that I see is you create a DSO as a target of 2LIS_03_BF and then a transformation with company code. Direct link between DS and IO is not advise because one is delta and the other is full (you could have some problems).
But if it's my choice... enhance the 0COMP_CODE_ATTR.
Regards;
Ricardo -
How to fill date key figure with system date?
Dear All,
We would like to set on specific action (button press) to assign current system date top a date key figure within our infocube.
Any idea how to achieve this?many thanks in advance for any idea!
Kind Regards
Olivier DESFOURDear Khaja,
I'm not exactly using an update rule, i'm using Integrated Planning component.
Customer would like to set this key figure on user action; ie for example
user validate a step within planning process by pressing a button on workbook.
then system is stamping system date within cube.
Hope it helps
Kind regards
Olivier -
Hi,
I am working with a standard business content IC that has the key figure InfoObjects defined as type date. When I double click on the InfoObject to review the detail from tab 'Type/unit', I see that it is defined with the radio button 'Date', but the 'Data type' is 'DEC - Counter or amount field with comma and sign'. When I loaded the data to this IO, I would get a 732,163 for the value, for example.
Has anyone come across this issue before? Can I change the standrad IC to have these in the Time characteristics instead of the Key Figures? I am expecting a date value, what should I do?
Thanks
"<i>When dealing with people, let us remember we are not dealing with creatures of logic. We are dealing with creatures of emotion, creatures bustling with prejudices and motivated by pride and vanity.</i>" ~ Dale Carnegie
"<i>The truth may be out there, but the lies are inside your head.</i>" ~ Terry Pratchett,
"<i>Confrontation lacks elegance and dignity, but most prefer to tell others how hateful they are toward another rather than maintaining that elegance and dignity</i>." ~ Anonymous
"<i>Educate yourself and get the story straight before you get confrontational, vulgar, immature, and prematurely jump into conclusion and into someone else's throat.</i>" ~ AnonymousHello ,
This actually depends on ur requirment. if you want some calculation like processing time,difference.. etc.. with this Date infoObject then u have to use the Key Fig InfoObject.
The difference between DAT and DEC is that in DEC..if the date is 13/04/2007 then it will give u number of days from 1.1.0001 that means somthing around 732,688 (current day of month =13 + April = 120 days+2007*365).
and your DAT will take exactly with it recives yyyymmdd (20070413)
-- Enjoy SAP
Anil Raparthi
Pls: award credits if you are satisfied with the above reply! -
Suppress cumulated key figures for actual data
Hello all,
I have build a query which display monthly actual and forecast order income for an ficsal year. The fiscal year starts in July and end in June
The forecast data were loaded in BW over an flat file for the whole fiscal year. The actual data gets loaded daily from R/3.
When I run the query and select the whole fiscal year and displayed the key figures as "cumulated" in the query properties, I can see all the cumulated forecast values (for 12 months) but the actual order income data just cumulated till the current month (December). For the next months (until June) always the last value from December remains.
I want to provide a line diagram in a Web Application, which shows the forecast and the actual data. Right now the line for the actual data stops to raise at the current period and gets continued as a horizontal line till the end of the fiscal year.
Therefore my question is: Is it possible to suppress values for actual data for the next periods in order to end the actual order income data line in the diagram at the current month.
Any ideas would be great.
Best regards from Munich,
StefanThe one thing I can think of would require a very messy way of doing things, but it would probably work.
If you created a set of calculated/restricted key figures for each period of the fiscal year (non-cumulated), you could also have a set that cumulates up to each period. Then, in the calculation, you can set the stipulation that if period x is not > 0, then don't sum that particular colum. Then, supress columns that don't have any data in the structure properties. I think you'd end up with 24 columns, 12 hidden, and some that won't display depending on which values exist. -
Summing up key figure in Cube - data load from ODS
Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field quantity
123 301 10
123 302 20
123 303 30
Expected record in Cube
Header-field Quantity
123 60
====================
Regards,
Pramod.Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod. -
I'm needing to supress a KF on a workbook or from within the query if no data is found for that key figure.
Any help will be awarded.
ThanksHi,
The last option: VBA in workbook:
Re: Display ' - ' instead of empty cell
Best regards,
Eugene -
Can CLOUD data source be joined to a combined data source?
Hi, experts,
I have created a cloud data source and I am trying to join the cloud data source with a combined data source.
I am having a problem.
This is how I joined the two data sources. I checked the Joined Data Source. It is ok.
When I open the report,
The error is just like this.
The error is just one line . So , I simply dont know how to solve this.
Any help is greatly appreciated.
Thanks in advance.
Regards,
Fred.Hi Murali,
I saw the solutions you provide seems to work for the user.
What I want to do is to transfer the Hierarchy from 0GL_ACCOUNT to another InfoObject 0GLACCEXT, however, when I right clicked the Hierarchy and tried to create transfer rules, but the Transfer Rules option prompted only DataSource in Source selections, I cannot select 0GL_ACCOUNT_HIER as my source.
Any advice?
Many thanks,
Vince -
Conditions: Variables on date key figures
Dear Sirs,
I am trying to create a condition on a key figure of type date (subtype: dats). I want the user to select a date interval for this condition, using variables.
The problems seems to be that the variable input screen thinks the user should enter an amount and not a date. If I enter a date in the variable then no data is beeing displayed.
So how can I get the variable to understand that the input is a date ?
Has anyone done what I try to do sucessfully.Hello Rakesh,
thanks for your input. However, I am not able to get it to work.
I create a condition on the key figure "date". I use e.g greater than. Then create a variable with replacement path to 0CALDAY, and transfer the condition.
When I run the report I get the following error.
Termination message sent
ABEND BRAIN (418): Variable VAR_20080128112329 (D2LEOFV2P3JFW0YWPGXBKJ53A) does not exist or is incorrectly used 4 D2LENS95OIB2G5DTW28S323D2
MSGV1: VAR_20080128112329
MSGV2: D2LEOFV2P3JFW0YWPGXBKJ53A
MSGV3: 4
MSGV4: D2LENS95OIB2G5DTW28S323D2
Have you managed to solve the excact same requirement?
regards,
Jørgen -
How to use exception for a Date Key Figure
Hello All,
I have the following requirement.
1. I have a Key Figure which is Date Type.
2. I need to color the cell to green if the it is filled with date otherwise leave it as it is.
Please suggest how to overcome it.
Thanks & Regards,
Rajibhi,
Your requirement is not clear, you have the below setup
I have the following requirement.
1. I have a Key Figure which is Date Type.
How can a KF be of date type, or is it the value of a date characteristic that you have extracted in KF using formula variable. If yes you just need to define exception for the value greater than 0.
regards,
Arvind. -
Hi friends...
I have a scenerio , where I have loaded the data from 3 different data sources say A , B and C in to 2 different DSO s and in to 2 different Info Cubes. And I have built Multi Provider from this 2 Info cubes.
In the data source B , I have BELNR (Parked document number ).WRBTR (for Amount). In the report I have to show a field called Nr of Documents Parked and Value of Documents Parked. Same thing for Data Source C, for Blocked Documents. Now My question is there is no Key Figure in My Data Model to Count the Nr of Parked / Blocked Docs....So in the Reporting how can I show this ? Do I need to use Customer Exits ? Do I need to have CKF /RKF ? if so , from what Key figures ? or Can I get the Count from the Backend (Modelling itself by using a Keyfigure with any Code)?...not only this 2 , I have lot many custom things to do in my Model...If any one can get me some idea on this , remaining will be very easier for me as they all are similar things to do....
Please let me know if you have any questions or I need to elabarate it more to get an Idea on this....
Thanks in advanceTHANKS GUYS ,
I wrote the transformation routiene to count all the parked documents as
IMPORTING
request type rsrequest
datapackid type rsdatapid
SOURCE_FIELDS-/BIC/ZPARKBEF TYPE /BIC/OIZPARKBEF
EXPORTING
RESULT type tys_TG_1-RSTT_IPTDA
DATA TMP TYPE tys_TG_1-RSTT_IPTDA.
IF SOURCE_FIELDS-/BIC/ZPARKBEF = 'Y'.
TMP = TMP + 1.
ENDIF.
RESULT = TMP .
But when I see the Infocube data its showing only 0 for Parked Before value 'N' and 1 for Parked Before vale 'Y'. But I want to calculate total number of parked documents ..How can I do this?
Thanks -
Data Sources for "0PS_C04"
Hi There,
I am installing 0PS_C04, but unable to figure out which data sources to be used? I have the list of data sources below :-
0CO_OM_OPA_1 Internal Orders Costs
0CO_OM_OPA_3 Internal Orders Overall Annual Plan Values
0CO_OM_OPA_6 Internal Orders Actual Costs Using Delta Extraction
0CO_OM_NTW_1 Network Costs
0CO_OM_NTW_2 Networks Actual Costs Using Delta Extraction
0CO_OM_NWA_1 Network Activities Costs
0CO_OM_NWA_2 Network Activities Actual Costs Using Delta Extraction
0CO_OM_NAE_1 Network Activity Element Costs
0CO_OM_NAE_2 Network Activity Elements Actual Costs Using Delta Extraction
0CO_OM_WBS_5 WBS Elements Accrual Calculations
0CO_OM_WBS_2 WBS Element Budget
0CO_OM_WBS_1 WBS Elements Costs
0CO_OM_WBS_4 WBS Elements Statistical Key Figures
0CO_OM_WBS_3 WBS Elements Overall Plan
0PS_CSH_NWA Payments in Network Activities
0PS_CSH_NTW Network Payments
0PS_CSH_WBS Payments in WBS Elements
0CO_OM_WBS_6 WBS Elements: Actual Costs Using Delta
Few of these are the delta datasources but simultaneously few are full uploads. Please suggest me on the same.
Thanks and Regards,
Sangini MathurThanks Manjunath,
That is fine, for example I have a datasource 0CO_OM_WBS1 to 0CO_OM_WBS6 which seems to be repetitive with delta funtionalities incorporated. I want to saagrigate these...
I have master data source like "0WBS_INH_ATTR - Inheritance Data for WBS Elements" and "0WBS_ELEMT_ATTR - Work Breakdown Structure Element (WBS Element)" which one to use as I need to have those User defined fields also which is not there in wbs_attr data source but in inheritance data source, but few fields are there in wbs_attr data source but not in inheritance data source.
Thanks for the reply,
Sangini.
Maybe you are looking for
-
NULL in primary keys NOT logged to exceptions table
Problem: Inconsistent behavior when enabling constraints using the "EXCEPTIONS INTO" clause. RDBMS Version: 9.2.0.8.0 and 10.2.0.3.0 - NULL values in primary keys are NOT logged to exceptions table - NOT NULL column constraints ARE logged to exceptio
-
[SOLVED] "Server is already active for display 0" in Terminals
So far, my searches haven't yielded any solutions to this. When my system starts, it boots to a console login prompt (no gdm, etc...) and I have 'startx' in my .bashrc to start my desktop. The desktop starts and functions fine (or so it seems). Probl
-
EDUCATION CESS IS NOT PICKING FROM MIGO.
HI I AM CHANGED EXCISE BASE VALUE IN MIGO.WHILE DOING MIRO EXCISE IS CALCULATING ON THE BASIS OF PO. AND ITS SHOWING WRONG CALCULATION ON VAT. REGARDS SARINBAVA Edited by: Csaba Szommer on Feb 4, 2012 8:34 PM
-
What's the problem.r exception
guys i have written this code but a run time null pionter exception error in java.lang is being shown in the console guyz plz help. here is the code import javax.swing.*; import java.awt.event.*; import java.awt.*; class master extends JFrame impleme
-
Sales intelligence responsibilities
Can I generate all standard reports available through SI without OSO implementation. what about data dependency with OSO transactional data for generating revenue and pipeline analysis reports