Keybinds no longer functioning after latest XFCE4 updates

Just as the title reads - XFWM4 is no longer handling keybinds set with the xfce4-keyboard-settings applet. I have verified the permissions on the keyboards.xml in ~/.config/xfce4/xfconf/xfce-perchannel-xml, as well as the permissions for the folder. I have also tried deleting the file and using the applet to restore the defaults to no avail. Additionally when attempting to connect gdb to xfwm for debugging, the session becomes unresponsive until I kill gdb from a VT. No log output is provided from XFWM when spawned using "xfwm4 --replace"
To be clear: none of the keybinds work; whether set by me or a default. The xfce4-keyboard-settings applet does however correctly detect keypresses and does correctly input them into the configuration file.
The wave of XFCE4 updates in question are as follows:
[2015-03-21 11:47] [ALPM] upgraded libxfce4ui (4.12.0-1 -> 4.12.1-1)
[2015-03-21 11:47] [ALPM] upgraded xfce4-session (4.12.0-2 -> 4.12.1-1)
[2015-03-22 20:20] [ALPM] upgraded xfce4-power-manager (1.4.3-1 -> 1.4.4-1)
[2015-03-27 20:45] [ALPM] upgraded xfce4-session (4.12.1-1 -> 4.12.1-2)
I'm not sure what sort of logging I could possibly provide to help troubleshoot this; but I will probably try reverting packages systematically until keybinds are functionally restored.

Welcome to Apple Discussions.
You can create a new user account and check things there.
Can you ping your router IP?
Are you using any proxy servers? Can you get your email?
Mihalis.

Similar Messages

HT1766 ipad no longer functions after accepting an updated version of "Hayday"

ipad no longer functions after accepting an updated version of "Hayday"

Unfortunately it was a blinding flash of the obvious that fixed my issue...
Simply rebooting the iMac brought it back to life.
Duh.
I assumed that since Apple usually forces reboots after updates if they are required that this didn't require one, apparently it did.

Rosetta no longer functions after iTunes & Quicktime update

I got off the 3rd phone call to AppleCare (three techs and product specialist -- the least helpful in the bunch by the way) and finally isolated the problem I'm having but the reaction from the AppleCare guy (the last one pretty much freaked) means there is little hope for a quick solution from Apple.
After updating iTunes and Quicktime using OSX software update. I could no longer launch legacy apps that operate using rosetta (i.e MS Office, AppleWorks, JMP, etc.). Additionally, if I go into GetInfo from the finder and click "Open using Rosetta" that app will no longer launch. In both cases the app simply (if clicked from the finder) appears briefly in the dock and then disappears.
When I had AppleCare on the line the guy went to confirm something with me on his machine and was very surprised to find that his copy of MS Word was not working either (his word were something like: "Good Lord, the menus are all grayed out, huh?". At which point I decided there was not going to be a fix. He sent me some articles on Archive and Install, which I may do but I'm hoping not to go that route.
I've got one more symptom that may help others figure out what's happening, which will hopefully mean you can help me fix this:
When I try and launch an app (legacy or universal) from the command line using rosetta (see this for more info) I get: Segmentation fault!
Okay, first would someone out there confirm that this is not happening on their system. Then, one of you brilliant souls, let me know what I can do to fix it. Is there a sneaky way I could bust into a package/install image and install a fresh copy of the rosetta libraries etc? My experience with Segmentation Fault usually points to the executable being broken, but I'm by no stretch of the imagination an expert.
Regards,
David G.

You won't like this but I figured out QT smashed rosetta soon after installing the ituunes/quicktime updates when quicken wouldn't load...i knew it was one of the major apps that was never released for universal...at first i assumed the apple update had just broken quicken and checked the quicken site, finding no posts...then it dawned on me that the QT update must have damaged the System so I went hunting in my apps for other rosetta-only apps, found an old CD label printing program and it exhibited the same behaviors.
I went to the apple site and the company has not posted any info on the bug, then went looking for a standalone rosetta installer...couldn't find one
Here's the part you won't like: my mac mini is 3 months old. I dug out the os x install disks and reinstalled the system. Then went through and reinstalled system updates. Reinstalling the system killed norton so I had to reinstall that too (no wonder i keep all the installer disks as dmg's on the ministack).
Result of all this, replacing the system, was that Rosetta is now working again.
I then went on to install ram, that went less smoothly and my local geniuses were less ingenious by this point, but that's another story for a paperweight website.

Can no longer Autofill after latest iTunes Update

My iPod Shuffled worked fine until I upgraded to the latest version of iTunes (version 7.5.020). Since the upgrade I continually have problems autofilling my Shuffle. iTunes will start to copying songs to my Shuffle and after a couple songs are copied iTunes will start over again. I have tried disabling all other software when autofilling but it still doesn't work. Also I have tried various options on the iTunes software without any success.

Hi Zak, thanks for the reply.
The filename is whatever is set to be the background fill of the site (I presume the desktop background fill, if mobile versions are set to be different). I've tried a number of different files, sizes and types/formats and the result is still the same, so as far as I can tell it's not the file itself causing the issue...
It uploads all pages (desktop, tablet and phone versions), .css files and .html files, and even the favicon .ico file but then hangs on the first image file, which incidentally is the background fill image.
The total number of files is said to be 154. It gets stuck on file number 24.
Yes the "Resume" dialog appears and upon clicking it just attempts to continue from the hang at the first image file (apparently 66% of the way through).
Re: the "BC site has changed" part - I thought as much but figured worth reporting.
... Incidentally, as I've written this reply, I left the "Resume" dialog open (ie neither clicking "resume" or "cancel" and just as I've finished typing it appears to have published the site successfully?!! (I must've left it for roughly 5 minutes)
Bizarre behaviour... I'm not sure if this will repeat itself with other sites but I'm sure there's a bug here that needs looking at regardless...?!
Any thoughts?

Can no longer publish after latest Muse update (April 2nd 2014)

Hi all,
This issue is two-fold; the first is somewhat minor, but the second is concerning me greatly, particularly as my workload is picking up at the moment...
Every time I attempt to publish (having created the site through Muse - as I find this easier, and I upgrade subsequently) I get a message telling me the BC site has changed and am given the option to "review" the changes or publish anyway. If I hit "review" it automatically skips the "merge" or don't merge screen and makes the choice to "merge" on my behalf (what If I don't want to merge?)... This happens EVERY time I attempt to publish the current site I'm working on.
Sure, I've seen this message before and usually, it only pops up if there's been any changes on the BC side of things which is fair-do's, but this site hasn't actually been published yet - and I'll tell you why in a sec - but yet I'm still getting this message EVERY time I attempt to publish...?!
The funny thing is, nothing on the BC side could've changed because it hasn't successfully published ONCE yet. This is due the second part of my problem where the publish pop-up (progress bar) hangs at aroun 66%, whenever it gets to any image file (regardless of size or format - yes, I've tried numerous varieties).
So, in short, currently I cannot actually publish a site, and every time I attempt to, I'm told changes from the BC side of things need merging with the Muse side...
Anyone got any ideas on what's happening here, if there's anything I can do or whether I can expect an update to fix these (I guess) bugs any time soon? I need to publish this particular site ASAP and have a new commission I'm starting this week too - I don't want to commit to delivering in a certain timeframe if my software won't actually let me publish!!!
Any help would be much appreciated.
Thanks.

Hi Zak, thanks for the reply.
The filename is whatever is set to be the background fill of the site (I presume the desktop background fill, if mobile versions are set to be different). I've tried a number of different files, sizes and types/formats and the result is still the same, so as far as I can tell it's not the file itself causing the issue...
It uploads all pages (desktop, tablet and phone versions), .css files and .html files, and even the favicon .ico file but then hangs on the first image file, which incidentally is the background fill image.
The total number of files is said to be 154. It gets stuck on file number 24.
Yes the "Resume" dialog appears and upon clicking it just attempts to continue from the hang at the first image file (apparently 66% of the way through).
Re: the "BC site has changed" part - I thought as much but figured worth reporting.
... Incidentally, as I've written this reply, I left the "Resume" dialog open (ie neither clicking "resume" or "cancel" and just as I've finished typing it appears to have published the site successfully?!! (I must've left it for roughly 5 minutes)
Bizarre behaviour... I'm not sure if this will repeat itself with other sites but I'm sure there's a bug here that needs looking at regardless...?!
Any thoughts?

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?, Windows 7PC no longer detects iPad 3 after latest itunes update. Why?

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

Safari can't connect after latest Lion update

Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

Iphone 4 not recognized and will not sync after latest itunes update. I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

After latest security update my MacBook is not finding any network. My network is ok, iPad and iPhone have no problems, but laptop is for all practical purposes turned into typing machine. Has somebody encountered similar problem? What to do?

After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?

Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?

Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

HT6114 My double clicks no longer work after doing this update. What happened?

Double clicks in iPhoto no longer work after doing the update. Trying to troubleshoot, but feeling dense in that I can't get this thing to work. Any suggestions, please?

Try this thread > https://discussions.apple.com/message/23317566#23317566

Even after latest soft update i still have apps wating to redownload again on my iphone , what do i do? also i heard i should email apple , whats the address?

even after latest soft update i still have apps wating to redownload again

In over three years, I have yet to have a problem or meet someone who has.
Most never have an issue.
As this is a support forum, designed for those with issues, of course you will see problems here ( many self inflicted). If you visit a hospital, you are likely to see many sick people, even though most are not sick.
It is really up to you, but most users never have an issue.
http://tech.fortune.cnn.com/2010/09/23/iphone-tops-j-d-powers-customer-satisfact ion-survey-for-4th-year-in-a-row/

Keybinds no longer functioning after latest XFCE4 updates

Similar Messages

Maybe you are looking for