HT1766 ipad no longer functions after accepting an updated version of "Hayday"

ipad no longer functions after accepting an updated version of "Hayday"

Unfortunately it was a blinding flash of the obvious that fixed my issue...
Simply rebooting the iMac brought it back to life.
Duh.
I assumed that since Apple usually forces reboots after updates if they are required that this didn't require one, apparently it did.

Similar Messages

  • Rosetta no longer functions after iTunes & Quicktime update

    I got off the 3rd phone call to AppleCare (three techs and product specialist -- the least helpful in the bunch by the way) and finally isolated the problem I'm having but the reaction from the AppleCare guy (the last one pretty much freaked) means there is little hope for a quick solution from Apple.
    After updating iTunes and Quicktime using OSX software update. I could no longer launch legacy apps that operate using rosetta (i.e MS Office, AppleWorks, JMP, etc.). Additionally, if I go into GetInfo from the finder and click "Open using Rosetta" that app will no longer launch. In both cases the app simply (if clicked from the finder) appears briefly in the dock and then disappears.
    When I had AppleCare on the line the guy went to confirm something with me on his machine and was very surprised to find that his copy of MS Word was not working either (his word were something like: "Good Lord, the menus are all grayed out, huh?". At which point I decided there was not going to be a fix. He sent me some articles on Archive and Install, which I may do but I'm hoping not to go that route.
    I've got one more symptom that may help others figure out what's happening, which will hopefully mean you can help me fix this:
    When I try and launch an app (legacy or universal) from the command line using rosetta (see this for more info) I get: Segmentation fault!
    Okay, first would someone out there confirm that this is not happening on their system. Then, one of you brilliant souls, let me know what I can do to fix it. Is there a sneaky way I could bust into a package/install image and install a fresh copy of the rosetta libraries etc? My experience with Segmentation Fault usually points to the executable being broken, but I'm by no stretch of the imagination an expert.
    Regards,
    David G.

    You won't like this but I figured out QT smashed rosetta soon after installing the ituunes/quicktime updates when quicken wouldn't load...i knew it was one of the major apps that was never released for universal...at first i assumed the apple update had just broken quicken and checked the quicken site, finding no posts...then it dawned on me that the QT update must have damaged the System so I went hunting in my apps for other rosetta-only apps, found an old CD label printing program and it exhibited the same behaviors.
    I went to the apple site and the company has not posted any info on the bug, then went looking for a standalone rosetta installer...couldn't find one
    Here's the part you won't like: my mac mini is 3 months old. I dug out the os x install disks and reinstalled the system. Then went through and reinstalled system updates. Reinstalling the system killed norton so I had to reinstall that too (no wonder i keep all the installer disks as dmg's on the ministack).
    Result of all this, replacing the system, was that Rosetta is now working again.
    I then went on to install ram, that went less smoothly and my local geniuses were less ingenious by this point, but that's another story for a paperweight website.

  • Keybinds no longer functioning after latest XFCE4 updates

    Just as the title reads - XFWM4 is no longer handling keybinds set with the xfce4-keyboard-settings applet. I have verified the permissions on the keyboards.xml in ~/.config/xfce4/xfconf/xfce-perchannel-xml, as well as the permissions for the folder. I have also tried deleting the file and using the applet to restore the defaults to no avail. Additionally when attempting to connect gdb to xfwm for debugging, the session becomes unresponsive until I kill gdb from a VT.  No log output is provided from XFWM when spawned using "xfwm4 --replace"
    To be clear: none of the keybinds work; whether set by me or a default. The xfce4-keyboard-settings applet does however correctly detect keypresses and does correctly input them into the configuration file.
    The wave of XFCE4 updates in question are as follows:
    [2015-03-21 11:47] [ALPM] upgraded libxfce4ui (4.12.0-1 -> 4.12.1-1)
    [2015-03-21 11:47] [ALPM] upgraded xfce4-session (4.12.0-2 -> 4.12.1-1)
    [2015-03-22 20:20] [ALPM] upgraded xfce4-power-manager (1.4.3-1 -> 1.4.4-1)
    [2015-03-27 20:45] [ALPM] upgraded xfce4-session (4.12.1-1 -> 4.12.1-2)
    I'm not sure what sort of logging I could possibly provide to help troubleshoot this; but I will probably try reverting packages systematically until keybinds are functionally restored.

    Welcome to Apple Discussions.
    You can create a new user account and check things there.
    Can you ping your router IP?
    Are you using any proxy servers? Can you get your email?
    Mihalis.

  • Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

    bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
    I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

    Hi russellpaton,
    Thanks for visiting Apple Support Communities.
    If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
    If you can’t use a Bluetooth accessory or car kit
    Cheers,
    Jeremy

  • I tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3

    i tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3

    Hello mom_5_01,
    The following article should be quite beneficial in your endeavor to update your iPad.
    iPad: Unable to update or restore
    http://support.apple.com/kb/HT4097
    You may encounter the following symptoms while updating or restoring your iPad:
    iPad continually restarts but never displays the Home screen.
    An update or restore did not complete and the iPad is no longer recognized in iTunes.
    iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
    If this occurs, you can place iPad into recovery mode and attempt to restore again. If iTunes displayed an alert with an error code, see this article before attempting the steps outlined here.
    Cheers,
    Allen

  • HT6114 My double clicks no longer work after doing this update.  What happened?

    Double clicks in iPhoto no longer work after doing the update.  Trying to troubleshoot, but feeling dense in that I can't get this thing to work.  Any suggestions, please?

    Try this thread >   https://discussions.apple.com/message/23317566#23317566

  • 3-d is no longer enabled after downloading Yosemeti update. Can I re-enable?

    3-d is no longer enabled after downloading Yosemeti update. Can I re-enable? I was able to 3-d layers prior to this new update. I have changed any drivers an know the mac is capable. Dunno how under systems it is disabled.

    Any computer tech would know that it is likely not firefox causing this issue, but an incompatibility with a new ebay sign-in page and the firefox browser. The browser only does what the code on the page tells it to. I have seen the issue with other sites that work with IE or with Safari, but not firefox and some that work with firefox and IE but not Safari, it is the web developer's fault for the page that isn't working, not your browser.
    ---It is possible that it is a firefox issue, but it is most likely an issue with the webpage itself. I do not have a problem signing into ebay at all with firefox.

  • First Generation iPad No Longer Recognised after iTunes 10.6 and iOS 5.1 updates, help me!

    I recently updated the version of iTunes on my early '06 iMac (17" 1.86GHz Intel Core Duo, 32-bit, 1.5GB RAM, OS X 10.6.8), to version 10.6 and the version of iOS on my first model iPad to 5.1. Since the update, it no longer shows up in iTunes despite it working perfectly fine.
    There is nothing wrong with the hardware or the connecting cables, I am unable to diagnose any possible cause of the issue as no error messages are presented on either the iPad or in iTunes. I cannot use my iPad without connectivity with my desktop computer.
    Is this problem a bug in iTunes 10.6 or iOS 5.1?
    Frankly I am appalled, it seems as though Apple didn't fully test either update before release.
    And I am not going to use Wi-Fi sync as a workaround. I need the security provided by a direct cable connection to the machine my iPad is synced with.

    Unfortunately it was a blinding flash of the obvious that fixed my issue...
    Simply rebooting the iMac brought it back to life.
    Duh.
    I assumed that since Apple usually forces reboots after updates if they are required that this didn't require one, apparently it did.

  • IPad will no longer sync after iOS 5 update

    I updated my Original iPad to iOS 5 and now it no longer syncs; it stays stuck at the preparing to backup step. This happens whether I try it via WiFi or via the standard way with the cable.
    I'm thinking I should do a Restore from Backup and get it back to iOS 4.3.5.

    I've been stymied at this backup failure (and thus sync and update since both go through the backup process first) for a long time, ever since release 4.3.3 or thereabouts.
    Stay with me, please; this was part of my recent troubleshooting process.  I tried using the new install of Safari and sure enough, it only loaded blank pages.  iTunes (new release) Help also loaded only blank pages and then reported "computer not connected to the internet".
    In seeking a resolution to the Safari connection issue, I came across this advice from Mike41: "If anyone runs across my post of 7/21/2011 regarding Safari 5.1 not connecting to the Internet on my Windows Vista system, BorisKon suggested I run a command prompt window as administrator and execute the command "netsh winsock reset" (then be sure to reboot). I tried this and now Safari 5.1 can access the Internet. See the discussion athttps://discussions.apple.com/message/15734035#15734035. I had to reboot for the command to take effect. "
    I did this on my system and now Safari, iTunes, and the iPad backup all function 100%.
    Start/Run/"cmd" without quotes.
    Type "netsh winsock reset" without quotes.
    Reboot the computer.
    Happy, happy, joy, joy...

  • IPad 2 no longer works after iOS 6 update was interrupted

    I have an iPad 2, of which I chose to update through settings>general>software update. I hit install and after the progress bar filled up the screen turned off. I panicked thinking it shut off so I held the power button. Now the iPad loads the Apple logo for 15 seconds and turns the display off and repeats this cycle infinitly. I put the device into recovery mode and it had the iTunes logo, I plugged it into the computer and I then clicked restore, it then asked to restore and update, however after it claims to extract the software it then displays an error message saying "The iPad "iPad" could not be restored. This device isn't eligible for the requested build." How will I ever manage to fix this? Someone, please help!

    Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • Apogee Jam No longer working after 1.1 update?

    My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
    Specifically what happens is:
    1. I open the garageband app
    2. I select the guitar amp
    3. I plug the Jam chord into Ipad (guitar is already connected to cord)
    4. Jam light goes green, blue, bright green then green
    When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
    I've tried plugging my guitar in first, then starting garageband, no difference in results.
    I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
    Outside the garageband app, the ipad does recognize the Jam in settings, general.
    What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
    Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

    Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
    Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
    Message was edited by: Rickd3333
    Message was edited by: Rickd3333

  • IPad 2 constantly rebooting after ios 7 update

    My IPad is hosed!  After the IOS 7 update, it is constantly rebooting.  I've tried to reset to factory settings to do a restore but it won't stay on long enough to get it done. Any one out there have any ideas/suggestions?  (besides giving up)

    Have you tried to reset iPad?
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Autofill no longer works after recent Firefox update

    The Auto-fill function on google toolbar no longer works ever since I updated to newest Firefox

    See this for support information about the Google Toolbar.
    [http://www.google.com/support/toolbar/?hl=en]
    Or visit the Google Toolbar forum.
    [http://www.google.com/support/forum/p/Toolbar?hl=en]

  • Mail search using e-mail addresses not longer works after 10.6 update?

    I just updated to 10.6 from 10.5. I have also added all the software updates.
    The search function no longer works for e-mail addresses. I used to right-click on an address, copy and paste in search. Now, when I do that, it lists like this : NAME <[email protected]> (sample info) instead of just the e-mail address. In this new form, the search function no longer functions. Is there a way to revert to the old way mail copies e-mail address?
    I do not want to have to delet ethe name & out of each paste.
    input greatly appreciated!

    Perfect! Works like a charm.
    For others looking for the fix.
    In 10.6, it seems someone at Apple decided that Copy Address should really mean Copy Name And Address And Add Angle Brackets Around The Address, because that's exactly what happens when you use Copy Address in Snow Leopard's Mail app. Instead of getting [email protected] on the clipboard, you get Sue Sample <[email protected]>.
    Besides now having an incorrect name on the Copy Address contextual menu item (thought admittedly, the alternative is a bit lengthy), this behavior is incredibly irritating if you want only the email address on the clipboard. Thankfully, some engineer somewhere deep within Apple included a hidden preference to change this behavior -- and the fine folks at Mac Daddy World (the Ecamm Network blog site) dug deep and discovered this preference.
    To revert to the 10.5-style behavior in Mail, first quit Mail then enter this command in Terminal:
    defaults write com.apple.mail AddressesIncludeNameOnPasteboard -bool NO

Maybe you are looking for