Keyboard controls stop working after exiting full screen

Hi everyone,
I have QT Pro 7.4.1, with a problem that started after upgrading to the .1 version.
When I exit full screen mode while watching a movie, the keyboard shortcuts for the player controls stop working. Instead, the computer beeps at me when I press the spacebar, etc. The keyboard controls still work during full screen mode, and after exiting full screen mode, I can still click on the play controls with the mouse to make them work. I've looked through the forum, but can't find anything about this. I also got this problem with one of my school's computers, with the same version of QT Pro. Is anyone else having this problem? Is it a known bug?
Thanks,
Irene

Yep.
A bug of sorts.
A "click" on the small screen version will restore QuickTime Player "focus" and then the keyboard inputs will work as designed.

Similar Messages

  • NB100 touchpad scroll bar stops working after exit full screen mode youtube

    I have few Toshiba laptops, satellite, and now netbook100.
    All of them share one problem, touchpad scroll bar:
    It will stop working after exit full screen mode in youtube.
    Here is how to reproduce the incident:
    1. using any mainstream browser, start playing a youtube video, click full screen button at the bottom right corner of the video.
    2. click on the [cross] to exit the full screen mode. (next to full screen button.)
    3. check if you scroll bar still functioning.
    4. a reboot will restore the function.
    Currently, Im on vista, I believe in XP you will have the same problem.
    Searching in google (touchpad scroll bar stops full screen youtube) will return more people share the same question but no answer.
    Environments: win xp all, win vista all.
    Windows all most updated driver, touch pad driver up to date.
    This is not a major tech problem but for a netbook, this is very annoying.
    If anyone have this problem or answers, please share it here.
    Thank you in advance.
    regards.

    I had the exact same problem on my laptop and after a lot of searching, I finally found the simplest solution that really works for me so here goes:
    Once you exit the full screen video and the scroll pad has stopped working, click once anywhere on the youtube page(just to unfocus from the video) and press the spacebar button on your keyboard twice.
    Et voila, your scroll pad should be working again. Beats the hassle of having to log off everytime.
    Hope this helps

  • 11.8.800.50 crashes after exiting full screen, every time!

    11.8.800.50 crashes after exiting full screen, every time!

    11.8 is in beta phase. Athough you can log a bug for the same by using below link.
    https://bugbase.adobe.com/

  • HT4650 My keyboard has stopped working after an update of Flash Player.  Help! What can I do?

    Why has my keyboard stopped working after Flash Player update?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do things work in Safe Mode?

  • Keyboard shortcuts stopped working after upgrading to iOS 7

    Does anyone know how to make the keyboard shortcuts start working again in iOS 8? After I upgraded to I OS 8 on my iPad air, the keyboard shortcut stopped working. Is there anyone who knows how to make this work again? All the fixes online pertain to iOS 7 and earlier, and they're not applicable for iOS 8.
    Hope someone can help!
    Thanks!

    I lost all my keyboard shortcuts on my iPhone 5s after upgrading to iOS 8. They still showed up on my iPad Air (iOS 8) and iMac (10.9.5). There were, however, massive sync problems, sometimes they would only flow from one device to all the others, sometimes from one device to only one of the other two, sometimes not at all.
    I deleted all my shortcuts and started from scratch, deleting “~/Library/Application Support/Ubiquity”, ~/Library/Dictionaries” and “~/Library/Mobile Documents/com~apple~TextInput” from the iMac and KeyboardDomain from my iOS devices.
    Rebooted everything a dozen times.
    Toggled Documents & Data Sync off and on a dozen times too in all kinds of combination with rebooting and deleting the aforementioned files.
    Everything always starts working and syncing fine for a very short while, but sooner or later one of my devices stops receiving new shortcuts as I re-add them.
    I reboot that device and it catches up. I enter new shortcuts, and that device doesn’t get any new shortcuts. This time, a reboot doesn’t fix anything.
    After using my devices for a while, I notice shortcuts are entirely gone from both the iPhone and iPad, but not from the iMac.
    I even upgraded my iPhone 5s to a 6, and right off the bat it had issues with keyboard shortcut sync. I also setup my iPad as new, and same thing: right off the bat, sync issues with keyboard shortcuts.

  • Usb keyboard keys stop working after 10 minutes on mac mini osx lion

    I am using a mid-2010 mac mini with opitical drive, updated to OS X Lion. Within the last two days I noticed a certain section of my wired keyboard eventually stops working. These are the right arrow key, as well as the 1, 2, 3, zero, period and enter keys. The virtual on-screen keyboard works just fine. I've come home from work and powered the mac and all keys work fine for ten minutes so it can't be that the keys are worn. I was going to take it to Apple Store genius bar but now I can't tell if it's the hardware or the lion software that's buggy.

    I had terrible problems last year with the USB ports on my 20" display. They were made worse when I installed a USB 2.0 PCI card in my G5.
    At the time the advice I got was that I should avoid using the display as a USB hub. Apparently the ports are only intended for devices relating to the display (whatever that means). Ridiculous if you ask me. I succesfully use my Cubase SX dongle in the back of the display but that's all.

  • Music controls stopped working after I updated iOS7

    As soon as I updated (iOS7) to my phone, my music controls stopped working. On the lock screen and in music app, I can’t change volume. Control button looks like lock and when I touch it,  volume doesn't want to change. It’s not about my iphone speakers because my phone can ring. I already tryed to reset my phone and still nothing better.

    This is happening with my iPad mini too. I bought last week, and it have already come with iOs 7, and the music controls on the lock screen had been working normally but since two days ago it stopped working the play button, favorites and next song button, only the volume is working yet. If anybody know something, let us know. Tell us what you will do cathconst. Thanks. :/

  • Keyboard, trackpad stops working after unfolding

    I got a brand new Macbook Air the other week.
    I noticed that sometimes, after folding the computer (with the OS running), then unfolding it - the keyboard and trackpad are not responding at the login screen. Actually if I press the keyboard it lights up properly but there is no access to the system. The only thing that works is the power button, so every time I have to power down the computer, then back on again.
    Is this a know problem or should is my computer broken?

    So I did a SMC reset a while ago when the problem occurred again. The computer rebooted...
    I'm not sure if this changed anything, because I didn't have any problem again until a minute ago when the same thing occurred again. Of course, I haven't done a Pram reset but I just get the feeling that... something is broken. :-P
    What I'm wondering is:
    - does this occur to a lot of people (only me?)
    - if the above is true, do you all put up with it, or do you try to get a new computer/have it fixed with support?
    I did have a problem with my iMac that I bought 1 1/2 year ago. Suddenly the disc drive just plain stopped working (1-3 months after purchase), no suggestions worked at all and there is a thread around here with tons of people with the same problem (believe me, the disc drive in iMacs at least are of very low quality). They suggested to have the computer replaced (as did the woman at the Apple Store) - sure that would be possible if I could put up with not having access to my workstation for a couple of weeks while it's on repair/replace trip. But unfortunately I can't just sit around doing nothing for 2-3 weeks, I need that computer for my job.
    I was deeply dissatisfied with Apple's non-handling of the issue, and so were everyone else with the same problem. Eventually the 1 year warranty ended and so here I am with my iMac, disc drive broken.
    Sooo, here I am again, with my second Apple computer in life, and am just worried what will happen next. Is this something else that I'll just have to put up with, or will Apple fix it for me, or will I have to pay additional money to have this thing fixed?

  • Keyboard shortcuts stopped working after 10.5.8 update

    Hi everyone,
    I'm having problems with my keyboard after I updated to 10.5.8. More specifically the CMDOPTRight combo used in Firefox and Textmate (and possibly others) has completely stopped working.
    I've checked it with the Keyboard Viewer and whenever I press this combo nothing happens. Strangely enough, when pressed in any other combo these keys work fine. I have installed no new software, installed any other updates or changed any existing keyboard combo and I'm at a bit of a loss as to what to do next.
    It's not the end of the world but any suggestions would be very gratefully received.

    It's alright, I've managed to create a workaround using Quicksilver custom triggers.

  • Back & forward buttons won't work after going full screen   

    I have a Logitech cordless mouse. When ever I'm watching a
    video, like on You Tube, and I go to full screen, my mouse
    back/forward buttons won't work, and I have to re boot my computer.
    I have tried every thing Logitech told me to do, but still have the
    problem. They think it's a flash player problem. I saw that one
    other person in the forums has the same problem. Any ideas?
    Thanks, Shawn.
    [email protected]

    I can't find the preferences section of itunes. where is it because it isn't at the very top of the screen and I didn't see it anywhere else. i hasn't told me that the back-up is corrupted so I don't know about that. I just know that it always comes up with the error message 50 when I try to get the back-up restored to it.

  • Lenovo ThinkPad Helix 369847B touch pad stops working after re-docking screen

    Hi, I've been having problems with the touchpad on my Lenovo ThinkPad Helix 369847B.  If I un-dock the screen to use in tablet mode and then re-dock with the keyboard, the touchpad might not work (no mouse, no left or right click), but the screen and keyboard still work. The same also happens (sometimes) if I sleep the machine by closing the screen then  re-opening.  Can't find a way to get the touchpad to work again, other than a restart, which is quite frustrating. Tried removing the screen, resetting the keyboard with a paperclip and re-docking - but no luck. Can anyone please tell me how to get the machine to recognise the touchpad again, without having to do a reboot?   Or any way to stop this happening? Machine stats:Lenovo ThinkPad Helix 369847BWindows 8.1 Pro 64-bit Also the machine is fully updated via Lenovo System Update & Windows update + latest keyboard firmware. Thanks Christopher

    hi paul_peria,
    Welcome to Lenovo Community Forums!
    Can you try Opening Device Manager and open Human interface Devices
    Uninstall everything that starts under with "HID-"
    If your are not done uninstalling all and it asked for a restart choose restart later then continue uninstalling the one's that starts with HID-
    Then Restart your system, check if the touch functionality works.
    Can you also check under System Properties windows if it shows touch input detected
    http://www.cybernetman.com/files/siteContent/editor/Pics/KB298/KB298_05.png
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Remote control stops working after a few days

    NW 6 SP3
    ZFD 3.2 SP2
    After importing workstations, remote control works fine. After a few
    days, remote ping might work but NOT remote control. Sometimes even remote ping errors out with the message that the "REMOTE MANAGEMENT
    AGENT
    IS NOT RUNNING"(when it appears it is). If I stop and start the
    "novell
    wuser agent" service, then I can usually remote control the
    workstation
    again. Occasionally, however, I get the message "The Remote
    Management
    agent was unable to locate the workstation in NDS". At which point I
    have
    to delete the workstation object and re-import the workstation to be
    able
    to remote control it again.
    Any help is appreciated.
    Jeff

    > [email protected]
    >
    > >
    > > The login script is running wsreg32.exe with the /s parameter
    > > pointing to the server servicing the import services.
    >
    > Is there a reason you are using this?
    > instead of DNS, hosts, or registry?
    >
    > As I am wondering if maybe at times the workstation manager tries to
    > registr, but can't find the server, even the wsreg is running.
    > Normally onces the workstation has registered it doesn't need the
    > address again, but if for whatever reason cannot find it's
    workstation
    > object it will need to resolve the import services.
    >
    > --
    > Jared L Jennings, CNE
    > Novell Support Forums SysOp.
    > http://support.novell.com/forums/faq_nntp.html
    >
    > Posting with XanaNews Reader 1.15.8.2
    > Geek by Nature, NetWare by Choice.
    I have a different server for each site(city) hosting the import
    services. There is only one variable allowed in DNS so all sites
    would
    try to get services and register to the same server.
    Using the container login script for each site to set the /s parameter
    was
    easier than changing the registry setting for each
    workstation...especially if that server changed. This way I would
    only
    have to change it one place.
    If the workstation has already been registered and imported AND I can
    remote control it, does it NEED to find the import server again if it
    hasn't been rebooted since the last time I remote controlled it?
    Thanks, jg

  • Form Controls stop working after December 2014 Updates

    For some users, Form Controls (FM20.dll) are no longer working as expected after installing MS14-082 Microsoft Office Security Updates for December 2014. Issues are experienced at times such as when they open files with existing VBA projects using forms
    controls, try to insert a forms control in to a new worksheet or run third party software that may use these components.
    You may received errors such as:
    "Cannot insert object"
    "Object library invalid or contains references to object definitions that could not be found"
    "The program used to create this object is Forms. That program is either not installed on your computer or it is not responding. To edit this object, install Forms or ensure that any dialog boxes in Forms are closed."  
    * Note In this last error message, the Forms text may also be replaced by the GUID of the control.
    Additionally, you may be unable to use or change properties of an ActiveX control on a worksheet or receive an error when trying to refer to an ActiveX control as a member of a worksheet via code.
    Steps to follow after the update:
    After updating, the cached control type libraries (extender files) may be out of sync. To resolve this issue, you must delete the cached versions of the control type libraries (extender files) on the client computer. To do this, perform a search on your
    hard disk for files that have the ".exd" file name extension and delete all the .exd files that you find. These .exd files will be re-created automatically when you use the new controls the next time that you use VBA. These extender files will be
    under the user's profile and may also be in other locations, such as the following:
    %appdata%\Microsoft\forms
    %temp%\Excel8.0
    %temp%\VBE
    Scripting solution:
    Because this problem may affect more than one machine, it is also possible to create a scripting solution to delete the EXD files and run the script as part of the logon process using a policy. The script you would need should contain the following lines
    and would need to be run for each USER as the .exd files are USER specific.
    del %temp%\vbe\*.exd
    del %temp%\excel8.0\*.exd
    del %appdata%\microsoft\forms\*.exd
    del %appdata%\microsoft\local\*.exd
    del %temp%\word8.0\*.exd
    del %temp%\ PPT11.0\*.exd
    Additional step:
    If the steps above do not resolve your issue, another step that can be tested (see warning below):
    1. On a fully updated machine and after removing the .exd files, open the file in Excel with edit permissions.
    2. Open Visual Basic for Applications > modify the project by adding a comment or edit of some kind to any code module  > Debug > Compile VBAProject.
    3. Save and reopen the file. Test for resolution.
    If resolved, provide this updated project to additional users.
    Warning: If this step resolves your issue, be aware that after deploying this updated project to the other users, these users will also need to have the updates applied on their systems and .exd files removed as well.
    If this does not resolve your issue, it may be a different issue and further troubleshooting may be necessary.
    References with further information: 
    3025036 "Cannot insert object" error in an ActiveX custom Office solution after you install the MS14-082 security update
    http://support.microsoft.com/kb/3025036/EN-US
    3017349 MS14-082: Vulnerabilities in Microsoft Office could allow remote code execution: December 9, 2014
    http://support.microsoft.com/kb/3017349/EN-US
    2726958 MS14-082: Description of the security update for Microsoft Office 2013: December 9, 2014
    http://support.microsoft.com/kb/2726958/EN-US
    2553154 MS14-082: Description of the security update for Microsoft Office 2010: December 9, 2014
    http://support.microsoft.com/kb/2553154/EN-US
    2596927 MS14-082: Description of the security update for the 2007 Microsoft Office suite: December 9, 2014
    http://support.microsoft.com/kb/2596927/EN-US

    In case it is of any help in identifying why this update caused errors, the specific instance I have experienced is as follows:
    The application uses Visual Basic (6.5) for Excel.  The piece of code causing an error (438) was as follows:
    Public currcombo(12) As ComboBox 
    Sub comboset()
    '   set up comboboxes for test selection
     With Workbooks(currCRW).Sheets("client results")
    '   set up test selection combo controls
        Set currcombo(1) = .F14
        Set currcombo(2) = .F15
        Set currcombo(3) = .F16
    . . . . .etc
    The error occurred on the first Set statement where 
    In this case (in two environments: Windows 7 Home Premium 64 bit and 32 bit, Excel 2007)  the cure was to uninstall the problem security update KB2596927.

  • Mission Control stops working after sleep

    Since upgrading to Mountain Lion when waking from sleep Mission Control no longer works. It doesn't crash, it just decides not to run, I can't access it by finger commands or from applications, I have to restart the computer for it to work again. How should I fix it?

    Mine is doing the same thing. I've been fixing it by opening up terminal and typing "killall Dock"

  • Trackpad Gestures stop working after screen sleep on OS 10.9.2 update

    Trackpad Gestures stop working after screen sleep after OS 10.9.2 update.  Anybody know why?  Is there a process I can stop or reboot in the Activity monitor to refresh this?  These gestures include launch pad, mission control and full screen swipes.  Annoying.

    Same problem same version. On a MB Air. I have every gesture turned on. When this happens I have same problem on Magic Trackpad and my MB Trackpad. If I quit the app part of the gestures come back but then stop again. The worst is scrolling. This one is a show stopper and always require quit and relaunch.

Maybe you are looking for