Keyboard cover for Late 2008 Unibody MB Pro?

Hi, was just wondering if anyone has found a good keyboard cover for a Unibody Late 2008 MB Pro.  I recently purchased this Moshi ClearGuard keyboard cover but it didn't fit, despite a few people saying it did in the reviews.
Thanks,
Evan

Most keyboard covers don't seem to fit well, as also trapping additional heat on the machine. I've been using these MBP's since 2006 and never had a need or desire for a keyboard cover. (never had a keyboard issue, of course I never run it thru the dishwasher,or use it in the shower, or use it for a stand to run my espresso machine)...
the additional heat will do your machine no help.
Being careful and using common sense is your best protection.
Your call though

Similar Messages

  • I have a late 2008 unibody Macbook Pro with PCI express slot.

    I have a late 2008 unibody Macbook Pro with PCI express slot, running MAC os 10.6.8 . also I have a Sonnet Tempo Sata Express card plugged in. but only one port works at about 100/mbs with an external HDD.  2nd port wont work, anyone can explain? thank you for your help!
    (Ps: the port at the bottom of the express card works, one on top doesnt)

    AirPlay Mirroring is compatible with OS X Mountain Lion > http://support.apple.com/kb/HT5404 Make a backup, open App Store and purchase OS X Mountain Lion

  • Will Late 2008 Unibody Macbook Pros support 8gb RAM

    I was just wondering if now with the ram increase, the late 2008 Unibody Macbook Pros will be able to support 8 gb of RAM now that new model supports it?
    Thanks
    Message was edited by: ofon68

    No.

  • Keyboard Mappings for Late 2008 MacBook Pro

    Hi
    I have found the keyboard mappings for older models of the MacBook Pro (shown below) but I can't find the same article for the new keyboard on my new late 2008 MacBook Pro.
    http://support.apple.com/kb/HT1220
    Thanks!

    Hey Bigtalex712!
    I have an article here for you that can provide some troubleshooting steps for this issue:
    Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
    http://support.apple.com/kb/TS1248
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Late 2008 Unibody MacBook Pro Battery Bulging

    Hi,
    As of a few months ago, I noticed that my MacBook Pro felt as though no matter which surface it was on, it would never sit there straight. Upon further inspection, I have noticed that the casing which covers both the battery and hard drive is being pushed out of its ordinary position.
    Taking the battery out reveals that it is beginning to swell and bulge which is causing this problem. While it isn't an enormous bulge like some I've seen on the Internet, I still consider it a safety issue and would rather not continue using it in the event it continues to develop and potentially explode.
    I called Apple support today to ask them what I can do about getting it replaced. Given that I bought this machine when it first came out in late 2008 without any additional warranty, I am a few months out of warranty.
    After being diverted to three different people from various departments and being put on hold for at least 45 minutes, a customer relations woman told me that Apple could not cover it. As a gesture of good will, she offered a discount coupon for my next purchase from Apple. I'm yet to receive such a coupon, but that isn't the point of this post.
    I want to know if there's anything I could possibly do for Apple to replace this battery - I know it's a long shot, but I'm currently a student and I don't really have $199 lying around to replace a battery which shouldn't be preparing to explode on me.
    Any suggestions would be appreciated!

    I'm copying my message from another thread, since this one is more "specialized".
    Thanks for understanding.
    Not so good news here (Croatia).
    I own a late 2008 MBP unibody. Bought in December 2008, so now 5 months out of warranty.
    I had the same battery bulge issue as described earlier, along with the trackpad not working problem (when I remove the battery, the trackpad works normally).
    A few days ago I contacted the Apple authorised reseller and distributor for Croatia, and got the answer which can be roughly described as "Buy yourself a new battery, we can't do anything".
    I was persistent and the person in the Croatian Apple Service department, after having an online chat with "someone from Apple", gave me the "case number" and said I could try contacting Apple directly (although they ARE Apple's distributor/reseller) - but still, they can't and won't do anything about replacing the battery free of charge.
    Of course, I mentioned the safety issue, and I was really polite and calm - but still nothing.
    Thanks to this thread, I called the Apple UK's Customer Service.
    I spoke to 3 different persons there (they had a completely different approach than the Croatian ones, congrats!), tried to reach the Customer Service directly, and finally spoke to someone. But, the answer was still - we can't help you. I got the new case number, but still - nothing, no offer for the replacement battery or anything similar.
    Yes, I will pay for that 1.5 hour long conversation.
    When I finally asked: does this mean that Apple oficially claims that bulging "good, healthy" batteries is a normal thing to happen, I got no response.
    My battery's health is GOOD, it has around 33 (yes, 33!) cycles since the machine was mostly used at home with external Cinema display/keyboard/mouse attached. When I try to put the battery back in, the trackpad is pressed from beneath so it's unusable; and I even can't close the back lid since the battery is deformed.
    Yes, every time, I did mention the fact that I am a loyal Apple customer since 1992, and I own exclusively Apple computers, currently in posession of 9 Macs and 3 iPhones and responsible for many people "switching" to Apple (friends, colleagues etc). This is the FIRST time I have ever had any technical issue with an Apple product and I am really disappointed now.
    The only useful information I got was from the last person over the phone in UK, and that is - that I should write a letter (not an email) to the Customer Relations - Apple Operations Europe, located in Hollyhill, Cork (Republic of Ireland).
    Finally, I contacted the Service Manager from Apple Croatia, who was extremely unconcerned about the whole thing and said "You can call the newspapers, you can call whoever you want, we won't do anything until Apple says we should replace it".
    So, NO battery replacement exception code.
    At least not until I write that letter to Ireland.
    P.S. I did, as asked from the UK's Customer Support, e-mail the System Profiler info, clear photos of the swelling battery, and iStat screenshot showing the battery's status/health. It didn't help to resolve this issue.

  • Late 2008 unibody MacBook Pro + 6GB RAM + Snow Leopard = Kernel Panic

    Hi,
    I've been trying to install Snow Leopard on my 2.8Ghz MacbookPro unibody (late 2008) with 6GB of RAM (4GB+2GB module).
    At first, I did an upgrade of my existing Leopard drive, and when booting back in 10.6, everything was crashing (could not open a single web browser but Safari, for instance), and I was getting kernel panics each 10 minutes.
    Then, I erased my boot disk and tried a clean install - I was getting kernel panics when installing! After 5 tries, it finally installed, and then I couldn't get through the welcome wizard the first time it boots.
    So I removed the 4GB RAM module, and re-installed a 2GB one, and then everything was fine, not a single problem.
    Take into consideration that that 4GB ram module was working perfectly under 10.5.8 (even while using the computer under a lot of stress) and passed all the hardware test.
    Has anyone been successful at running Snow Leopard 10.6 on a late 2008 Macbook Pro unibody and 6GB of RAM?

    Wow, this is really interesting! I own a UniBody MacBook Aluminum 13" 2.4 GHz 5,1 (October 2008) and ordered a 4 GB RAM module from OWC to max out my system to 6 GB for virtual machine use. I'd just performed a clean install of Snow Leopard a couple of days ago and was excited about the new operating system along with that additional RAM. But guess what? When I inserted the new 4 GB stick I suffered a kernel panic within minutes! I tried moving the module around between the two slots and inserting it on its own without the additional 2 GB module and the same lockups occured every time!
    Who ever would have thought this might be a problem with the new operating system rather than an incompatibility with the new module? OWC even agreed to refund my purchase but before I send the stick back I'll go ahead and install the original Leopard operating system and try again. Based on your experience I'm convinced the new stick will work and prefer more RAM than a newer operating system. Thanks to all of you for having posted this; I'd have never suspected an issue with Snow Leopard otherwise. In fact, I was hoping to be able to upgrade to 8 GB of RAM with 10.6. Turns out we may be better off with 10.5.8, at least for now!

  • Replacement for dvi to vga adapter for late 2008 17"Macbook pro

    Hello,
    I have a 17" inch late 2008 mack pro. The apple dvi to vga adapter cable is not working anymore. I can seem to find a replacement for it. I have tried the generic dvi to vga adapter (image attached). This does not work. Please advise

    Hello mshameel,
    It may help to reset your system's SMC and NVRAM.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

  • Voltage requirement for late 2008 17" MacBook Pro

    I bought a used 17" MacBook Pro - vintage late 2008 and have been having power issues with it.  Screen flashing, system crash.  Streaming video online, system crash. 
    Took the battery out and held down the power button for about 30 seconds to discharge the battery, after which things are OK for a while.  But then it started up again.  So I took the battery out and did it all again.
    I'm wondering if the power adapter that came with the machine is for the wrong voltage?  I see that there are three different voltage levels available. 
    Can anyone tell me what is the correct adapter voltage for my machine?
    Thanks!!
    Judith

    Bring you MBP and power adapter to an Apple store.  If you need a new one, it will cost $79.
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Ciao.

  • Superdrive problem (Late 2008 unibody Macbook Pro)

    Hi guys.
    Basically I have had this problem for the last 2 months with it working once after I installed more RAM and opening up to find quite a dusty interior of my unibody MBP. I cleared out the dust installed the RAM, tried a DVD and it worked for the first time in a few months.
    I then tried upgrading to Snow Leopard using the SL disc and it didn't work. I have a youtube video describing the issue and when I tilt the MBP on it's side I also get a clicking noise from the DVD superdrive. **I also have the exact same issue with a late 2006 model MBP**
    http://www.youtube.com/watch?v=yIUkDOeRHlI
    So here is the issue, I am not under warranty anymore and I was thinking of using compressed air to try and clear out dust that is perhaps lodged inside the drive, but maybe you guys have some better ideas or maybe if it's dead just order a new drive and swap it myself?

    Compressed air is more likely just to redistribute the dust inside your drive than to remove any of it. A drive cleaning disc would have a more focused effect, and using one often solves what may seem to be a serious hardware problem. Pick one up at any Radio Shack or other electronics outlet.
    Don't move or tilt your computer while a disc is spinning in the drive. Gyroscopic forces will cause the disc to scrape against internal parts of the drive, possibly damaging both.

  • Mountain Lion on 2008 Unibody MacBook Pro?

    I am currently running OSX Lion on a late 2008 unibody macbook pro that has been upgraded to 8GB of RAM.  It runs perfectly and I am a little woried that upgrading to OSX Mountain Lion might make things run slower or less smoothly.
    Is anybody running Mountain Lion on a system similar to mine?  Is it slower?  Faster?  The same?
    Thanks in advance,
    ---Tim

    Correct. You can partition the drive and create a separate volume that has about 300 GBs, then clone to this partition. Here's how it's done:
    To resize the drive do the following:
    1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

  • Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Welcome to Apple Support Communities
    You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
    There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

  • Does anyone know where you can buy an "AZERTY" keyboard or keyboard cover for Logic Pro X?

    Does anyone know where you can buy an "AZERTY" keyboard or keyboard cover for Logic Pro X?
    Thanks for the support.

    KB covers makes a logic covers and azerty covers. Why not give them a call to see if they can make one for you?
    x

  • I have a late 2008 Mac Book Pro and would like to upgrade to 8G, any suggestions on a brand?  I can only find Ramjet or Cruical for the upgrade and there is a $30 difference in price.

    I ahve a late 2008 Mac Book Pro and would like to upgrade the memory to 8g.  I can only find 2 options Crucial and Ramjet.  There is a $40 difference in the cost.  Does anyone know if one is better than the other?

    I have gotten my RAM from either Crucial or Macsales. They are both excellent.

  • Keyboard Cover for the MBP

    Does anybody have a Keyboard cover for the MBP?
    i'm looking to invest in one, just need suggestion on which and where to get one!
    kevin
    btw: its a 15" mbp

    Whether you're talking about the old MacBook Pro (with "PowerBook" style keyboard) or the new unibody Late 2008 MacBook Pro (with chiclet, MacBook Air style keyboard), the BEST one I think, because I searched far and wide and tried them "all" out, is from iSkin.
    It's not sticky (like ZCover's) and it's not el cheapo like some other ones I've seen that advertise as not being sticky (it literally, the silicone cover, sticks to your fingers while typing), but look like crud.
    I am typing with one right now. It is fantastic. I bought the "painted on" ones. It was the Arctic Pro Touch FX model.
    Here it is:
    [http://www.iskin.com/productkbrdair.html]
    (If you have the older MacBook Pro, just go to the right section on their website. You can also choose which ever color you like, of course. I just liked how the keyboard cover I got looks like there is NO keyboard cover at all!).
    P.S. KBCovers also sells a similar cover and they are not sticky either. I just didn't find out about them until after I bought my iSkin one. (Was at Macworld last week, why I was able to "test drive" all the models before settling on one). Also, PowerSupport is coming out with one--according to the dealers there--but it's not out yet. Their demo is also not the sticky kind. (Too much info?).

  • [Solved] Beachballs on late 2008 15" MacBook Pro MacBookPro5,1 with SATA II HD

    Each time I upgraded hard disks in my late 2008 15" MacBook Pro ( MacBookPro5,1 ) I experienced increasing beachballs. The worst was my recent upgrade to a Seagate 1TB SSD hybrid drive.
    I had lived with this pain for years and it appears a simple jumper change could have solved it. In my opinion all or at least some models of the late 2008 MacBook 15" Pros do not reliably support SATA II 3 Gbit/second.
    See jumper diagram for Seagate drives. Note the diagram is showing drive laying hard disk circuit board side up. Other manufacturers may differ.
    http://knowledge.seagate.com/article...language=en_US
    From what I uderstand my late 2008 MacBook Pro was designed to support SATA II 3 Gbit/second with it's Nvidia chip set. In fact every model from late 2008 appears to have support for SATA II.
    Then in early 2011 they added support for SATA III 6 Gbit/sec which the 1TB ST1000LM014 hybrid drive also supports. ( Hopefully they got SATA III right in their first 2011 model year. ) Unfortunately for me I do not think they got SATA II right in their first late 2008 model year.
    I hope this may help someone avoid the pain I experienced,
    -EdOfTheMountain
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP51.007E.B06
      SMC Version (system):          1.33f8
      Serial Number (system):          73******1G0
      Hardware UUID:          ****
      Sudden Motion Sensor:
      State:          Enabled
    Serial-ATA
    NVidia MCP79 AHCI:
      Vendor:          NVidia
      Product:          MCP79 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          3 Gigabit
      Description:          AHCI Version 1.20 Supported
    ST1000LM014-1EJ164:
      Capacity:          1 TB (1,000,204,886,016 bytes)
      Model:          ST1000LM014-1EJ164                     
      Revision:          SM11   
      Serial Number:                      W3804LD1
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Rotational Rate:          5400
      Medium Type:          Rotational
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk0s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk0s1
      Content:          EFI
    ST-1TB:
      Capacity:          999.86 GB (999,860,912,128 bytes)
      Available:          130.51 GB (130,505,502,720 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
      Content:          Apple_HFS
    <Edited By Host>

    Hi Mike,
    I am not sure it is same issue if drive is not even recognized.  But I would not give up hope.  I know my late 2008 MacBookPro5,1 has this problem even though it was designed to work at SATA II 3 Gbit/second.  It may be possible that your 2009 model has a similar issue.
    If the jumper works for you, then please cut and paste your MacBook's Hardware Overview.  It would be nice to see the Serial-ATA hardware too. Go to:
    Apple icon
    About This Mac
    More Info
    System Report
    My late 2008 is:
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP51.007E.B06
      SMC Version (system):          1.33f8
      Serial Number (system):          73******1G0
      Hardware UUID:          ****
      Sudden Motion Sensor:
      State:          Enabled
    Serial-ATA
    NVidia MCP79 AHCI:
      Vendor:          NVidia
      Product:          MCP79 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          3 Gigabit
      Description:          AHCI Version 1.20 Supported
    -Ed
    <Edited By Host>

Maybe you are looking for

  • Formacao errada do XML 2.0

    Boa noite Pessoal, Estou com problema na geração do XML. A NF-e é aprovada pela SEFAZ porem quando faço o download da mesma ou quando envio o XML para o cliente o xml esta  errado segue  XML errado: Estamos com o SP do GRC no SP16 acredito ser esse o

  • PDF file doesn't view properly in firefox & favicon doesn't show in Safari

    I've got three issues I could use some advice with. 1. I used some iFrame code generously posted by Oldtoad that allows a pdf file in an IFrame. It works beautifully in Safari. here's an example: http://web.mac.com/phelpssculpture/Site/resumeone_page

  • Inserting rows in table control(Module pool)!!

    Hi, Pls provide me with some code sample for inserting rows in a table control (module pool)... Regards Gunjan

  • My Skype number is still not working please check

    Wajid.zareen2

  • Create a new file

    Hello, I have a signed applet but it does not allow me to create new files. I can only read and create new folders. for example, the code: myFile.mkdirs();works ok but with: myFile.createNewFile();I get the exception: java.io.IOException: Access is d