Keychain problem/use copy from clone?
Not sure how this happened but Keychain is out of whack. Lost or wrong passwords. Can I simply trash Keychain Access App in Applications/Utilities and copy good one over from clone, or does it go deeper than that? I see there are associated system files (KC First Aid reports no problems).
Thanks for help.
Thanks Michael. Not only were the passwords messed up but the "show password" checkbox option wasn't working. I booted from the clone (to get the two good library folders you mentioned), but when I was over there "show password" was working and I was able to recover all the correct passwords. In fact, when I restarted from the Mac "show password" was working again. So I guess I'll take the conservative option here and just re-enter passwords, now that I know them, as they are called for. BTW, out of curiosity, what would have happened if I'd trashed the Keychain App after copying over the one from the clone?
Similar Messages
-
Is there any way to use copy from function in cProject Project creation.
Hi,
Kinldy suggest if any one have idea to use copy from function in cProject while creating Project in cProject.
We have copy from function in our material creation and BOM, Is there any way to copy the old project and we can take the same for new project as a Paste entire structure.
Please share with me if you have any ideas for the same.
Thanls in advance for your help.
Thanks & Regards.
RajHi,
please see
[http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm|http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm]
there the third case ("Based on an operational project ...")
Kind regards,
Florian -
Problem using existsnode from view
I am having a problem using existsnode from a view. I am currently using 10.2.0.3
example
CREATE OR REPLACE VIEW XML_PERSON_ASSOCIATION
(PERSON)
AS
select
xmlelement("Person",
xmlforest(
extractvalue(value(p),'/Person/PersonID') "PersonID",
extractvalue(value(p),'/Person/Prefix') "Prefix",
extractvalue(value(p),'/Person/FirstName') "FirstName",
extractvalue(value(p),'/Person/MiddleName') "MiddleName",
extractvalue(value(p),'/Person/LastName') "LastName",
extractvalue(value(p),'/Person/Suffix') "Suffix",
extractvalue(value(p),'/Person/PreferredName') "PreferredName",
extractvalue(value(p),'/Person/Gender') "Gender",
extractvalue(value(p),'/Person/PrimaryLanguage') "PrimaryLanguage",
extractvalue(value(p),'/Person/RecordStatus') "RecordStatus",
extractvalue(value(p),'/Person/ImportedDate') "ImportedDate",
(select
xmlagg(
xmlelement("Association",
xmlforest(
extractvalue(value(oa),'/OrganizationPersonAssoc/Name') "Name",
extractvalue(value(ot),'/OrganizationType/OrganizationID') "OrganizationID",
extractvalue(value(ot),'/OrganizationType/Type') "OrganizationType",
extractvalue(value(a),'/Association/Role') "Role",
extractvalue(value(a),'/Association/RecordStatus') "RecordStatus",
extractvalue(value(oa),'/OrganizationPersonAssoc/ImportedDate') "ImportedDate"
xmlelement("PersonTypes",
extract(value(per),'/Person/PersonTypes/PersonType')
xmlelement("Addresses",
extract(value(a),'/Association/Addresses/Address')
xmlelement("ContactMechanisms",
extract(value(a),'/Association/ContactMechanisms/ContactMechanism')
from org_person_assoc oa,
table(xmlsequence(extract(value(oa),'/OrganizationPersonAssoc/OrganizationTypes/OrganizationType'))) ot,
table(xmlsequence(extract(value(ot),'/OrganizationType/Associations/Association'))) a,
table(xmlsequence(extract(value(a),'/Association/Persons/Person'))) per
where extractvalue(value(per),'/Person/PersonID') = extractvalue(value(p),'/Person/PersonID')
) "Associations"
) person
from person p
/When I run the following statment
select person
from xml_person_association o
where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1;
I get no records returned. Now if I used the extract function and use the same path that's in the existsnode clause I get a record returned.
select extract(person,'/Person/Associations/Association')
from xml_person_association o
where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1;
<Association>
<Name>TEST DATA</Name>
<OrganizationID>30097</OrganizationID>
</Association>
If I run the same style of existsnode statment against a table directly instead of a view I am not required to use an extract caluse that has the same path that is used in the existsnode clause.
Thanks for the help.
Message was edited by:
mdrakeTesting in 11g I get
SQL>
SQL>
SQL> set echo on
SQL> spool testcase.log
SQL> --
SQL> connect sys/ as sysdba
Enter password:
Connected.
SQL> set define on
SQL> set timing on
SQL> --
SQL> define USERNAME = XDBTEST
SQL> --
SQL> def PASSWORD = XDBTEST
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old 1: drop user &USERNAME cascade
new 1: drop user XDBTEST cascade
User dropped.
Elapsed: 00:00:09.42
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old 1: grant connect, resource to &USERNAME identified by &PASSWORD
new 1: grant connect, resource to XDBTEST identified by XDBTEST
Grant succeeded.
Elapsed: 00:00:00.03
SQL> grant create any directory, drop any directory to &USERNAME
2 /
old 1: grant create any directory, drop any directory to &USERNAME
new 1: grant create any directory, drop any directory to XDBTEST
Grant succeeded.
Elapsed: 00:00:00.00
SQL> grant alter session, create view to &USERNAME
2 /
old 1: grant alter session, create view to &USERNAME
new 1: grant alter session, create view to XDBTEST
Grant succeeded.
Elapsed: 00:00:00.00
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old 1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new 1: alter user XDBTEST default tablespace USERS temporary tablespace TEMP
User altered.
Elapsed: 00:00:00.00
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> alter session set events ='19027 trace name context forever, level 0x800'
2 /
Session altered.
Elapsed: 00:00:00.00
SQL> var xmlText1 clob
SQL> var xmlText2 clob
SQL> var xmlSchema clob
SQL> var schemaURL varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'mcs.xsd';
3 :xmlSchema :=
4 '<!-- edited with XMLSpy v2007 sp2 (http://www.altova.com) by Shaun (PPD Inc) --> <s:schema xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:xdb=
"http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:storeVarrayAsTable="true">
5 <s:element name="Organization" type="Organization" xdb:defaultTable="ORG"/>
6 <s:element name="Person" type="Person" xdb:defaultTable="PERSON"/>
7 <s:element name="OrganizationPersonAssoc" type="Organization" xdb:defaultTable="ORG_PERSON_ASSOC"/>
8 <s:complexType name="Organization" xdb:SQLType="Organization">
9 <s:sequence minOccurs="0">
10 <s:element name="Name" type="s:string" nillable="true"/>
11 <s:element name="LongName" type="s:string" nillable="true"/>
12 <s:element name="Description" type="s:string" nillable="true"/>
13 <s:element name="FWANumber" type="s:string" nillable="true"/>
14 <s:element name="GUID" type="s:string" nillable="true"/>
15 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
16 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
17 <s:element name="RecordStatus" type="s:string" nillable="true"/>
18 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
19 <s:element name="OrganizationTypes" type="ArrayOfOrganizationType" minOccurs="0"/>
20 <s:element name="OrganizationSynonyms" type="ArrayOfOrganizationSynonym"/>
21 <s:element name="ImportedDate" type="s:date"/>
22 </s:sequence>
23 </s:complexType>
24 <s:complexType name="ArrayOfOrganizationType" xdb:SQLType="ArrayOfOrganizationType">
25 <s:sequence minOccurs="0">
26 <s:element name="OrganizationType" type="OrganizationType" minOccurs="0" maxOccurs="unbounded"/>
27 </s:sequence>
28 </s:complexType>
29 <s:complexType name="OrganizationType" xdb:SQLType="OrganizationType">
30 <s:sequence minOccurs="0">
31 <s:element name="OrganizationID" type="s:string"/>
32 <s:element name="Type" type="s:string" nillable="true"/>
33 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
34 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
35 <s:element name="SiteEstablishmentStatus" type="s:string" nillable="true"/>
36 <s:element name="SiteEstablishmentStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
37 <s:element name="IPFNumber" type="s:int"/>
38 <s:element name="DUNSNumber" type="s:int"/>
39 <s:element name="GUID" type="s:string" nillable="true"/>
40 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
41 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
42 <s:element name="RecordStatus" type="s:string" nillable="true"/>
43 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
44 <s:element name="LegacyCodes" type="ArrayOfLegacyCode" minOccurs="0"/>
45 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
46 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
47 <s:element name="Associations" type="ArrayOfAssociation" minOccurs="0"/>
48 </s:sequence>
49 </s:complexType>
50 <s:complexType name="ArrayOfLegacyCode" xdb:SQLType="ArrayOfLegacyCode">
51 <s:sequence minOccurs="0">
52 <s:element name="LegacyCode" type="LegacyCode" minOccurs="0" maxOccurs="unbounded"/>
53 </s:sequence>
54 </s:complexType>
55 <s:complexType name="LegacyCode" xdb:SQLType="LegacyCode">
56 <s:sequence minOccurs="0">
57 <s:element name="Code" type="s:string" nillable="true"/>
58 <s:element name="NetworkID" type="s:string"/>
59 <s:element name="GUID" type="s:string" nillable="true"/>
60 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
61 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
62 <s:element name="RecordStatus" type="s:string" nillable="true"/>
63 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
64 </s:sequence>
65 </s:complexType>
66 <s:complexType name="ArrayOfAddress" xdb:SQLType="ArrayOfAddress">
67 <s:sequence minOccurs="0">
68 <s:element name="Address" type="Address" minOccurs="0" maxOccurs="unbounded"/>
69 </s:sequence>
70 </s:complexType>
71 <s:complexType name="Address" xdb:SQLType="Address">
72 <s:sequence minOccurs="0">
73 <s:element name="StreetName1" type="s:string" nillable="true"/>
74 <s:element name="StreetName2" type="s:string" nillable="true"/>
75 <s:element name="StreetName3" type="s:string" nillable="true"/>
76 <s:element name="StreetName4" type="s:string" nillable="true"/>
77 <s:element name="CityName" type="s:string" nillable="true"/>
78 <s:element name="CityGUID" type="s:string" nillable="true"/>
79 <s:element name="CityCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
80 <s:element name="CityLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
81 <s:element name="CityRecordStatus" type="s:string" nillable="true"/>
82 <s:element name="CityRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
83 <s:element name="StateName" type="s:string" nillable="true"/>
84 <s:element name="StateGUID" type="s:string" nillable="true"/>
85 <s:element name="StateCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
86 <s:element name="StateLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
87 <s:element name="StateRecordStatus" type="s:string" nillable="true"/>
88 <s:element name="StateRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
89 <s:element name="CountryName" type="s:string" nillable="true"/>
90 <s:element name="CountryCode" type="s:string" nillable="true"/>
91 <s:element name="CountryGUID" type="s:string" nillable="true"/>
92 <s:element name="CountryCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
93 <s:element name="CountryLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
94 <s:element name="CountryRecordStatus" type="s:string" nillable="true"/>
95 <s:element name="CountryRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
96 <s:element name="ZipPostalCode" type="s:string" nillable="true"/>
97 <s:element name="GUID" type="s:string" nillable="true"/>
98 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
99 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
100 <s:element name="RecordStatus" type="s:string" nillable="true"/>
101 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
102 <s:element name="Type" type="s:string" nillable="true"/>
103 <s:element name="TypeOtherSpecify" type="s:string" nillable="true"/>
104 <s:element name="InternalOffice" type="s:string" nillable="true"/>
105 <s:element name="MailStopCode" type="s:string" nillable="true"/>
106 <s:element name="PreferredFlag" type="s:string" nillable="true"/>
107 <s:element name="ActiveFromDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
108 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
109 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
110 </s:sequence>
111 </s:complexType>
112 <s:complexType name="ArrayOfContactMechanism" xdb:SQLType="ArrayOfContactMechanism">
113 <s:sequence minOccurs="0">
114 <s:element name="ContactMechanism" type="ContactMechanism" minOccurs="0" maxOccurs="unbounded"/>
115 </s:sequence>
116 </s:complexType>
117 <s:complexType name="ContactMechanism" xdb:SQLType="ContactMechanism">
118 <s:sequence minOccurs="0">
119 <s:element name="ContactType" type="s:string" nillable="true"/>
120 <s:element name="ContactTypeOtherSpecify" type="s:string" nillable="true"/>
121 <s:element name="ContactValue" type="s:string" nillable="true"/>
122 <s:element name="ContactAreaCode" type="s:string" nillable="true"/>
123 <s:element name="ContactCountryCallingCode" type="s:int"/>
124 <s:element name="ContactTollFreeFlag" type="s:string" nillable="true"/>
125 <s:element name="ContactGUID" type="s:string" nillable="true"/>
126 <s:element name="ContactCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
127 <s:element name="ContactLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
128 <s:element name="ContactRecordStatus" type="s:string" nillable="true"/>
129 <s:element name="ContactRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
130 <s:element name="Role" type="s:string" nillable="true"/>
131 <s:element name="PhoneExtension" type="s:string" nillable="true"/>
132 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
133 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
134 <s:element name="ActiveFromDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
135 <s:element name="GUID" type="s:string" nillable="true"/>
136 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
137 <s:element name="ModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
138 <s:element name="PreferredFlag" type="s:string" nillable="true"/>
139 <s:element name="RecordStatus" type="s:string" nillable="true"/>
140 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
141 </s:sequence>
142 </s:complexType>
143 <s:complexType name="ArrayOfAssociation" xdb:SQLType="ArrayOfAssociation">
144 <s:sequence minOccurs="0">
145 <s:element name="Association" type="Association" minOccurs="0" maxOccurs="unbounded"/>
146 </s:sequence>
147 </s:complexType>
148 <s:complexType name="Association" xdb:SQLType="Association">
149 <s:sequence minOccurs="0">
150 <s:element name="Role" type="s:string" nillable="true"/>
151 <s:element name="GUID" type="s:string" nillable="true"/>
152 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
153 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
154 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
155 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
156 <s:element name="RecordStatus" type="s:string" nillable="true"/>
157 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
158 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
159 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
160 <s:element name="Persons" type="ArrayOfPerson" minOccurs="0"/>
161 </s:sequence>
162 </s:complexType>
163 <s:complexType name="ArrayOfPerson" xdb:SQLType="ArrayOfPerson">
164 <s:sequence minOccurs="0">
165 <s:element name="Person" type="Person" minOccurs="0" maxOccurs="unbounded"/>
166 </s:sequence>
167 </s:complexType>
168 <s:complexType name="Person" xdb:SQLType="Person">
169 <s:sequence minOccurs="0">
170 <s:element name="PersonID" type="s:int"/>
171 <s:element name="Prefix" type="s:string" nillable="true"/>
172 <s:element name="FirstName" type="s:string" nillable="true"/>
173 <s:element name="MiddleName" type="s:string" nillable="true"/>
174 <s:element name="LastName" type="s:string" nillable="true"/>
175 <s:element name="Suffix" type="s:string" nillable="true"/>
176 <s:element name="PreferredName" type="s:string" nillable="true"/>
177 <s:element name="Gender" type="s:string" nillable="true"/>
178 <s:element name="PrimaryLanguage" type="s:string" nillable="true"/>
179 <s:element name="GUID" type="s:string" nillable="true"/>
180 <s:element name="RecordStatus" type="s:string" nillable="true"/>
181 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
182 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
183 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
184 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
185 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
186 <s:element name="PersonDegrees" type="ArrayOfPersonDegree" minOccurs="0"/>
187 <s:element name="PersonSpecialties" type="ArrayOfPersonSpecialty" minOccurs="0"/>
188 <s:element name="PersonTypes" type="ArrayOfPersonType" minOccurs="0"/>
189 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
190 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
191 <s:element name="ImportedDate" type="s:date"/>
192 </s:sequence>
193 </s:complexType>
194 <s:complexType name="ArrayOfPersonDegree" xdb:SQLType="ArrayOfPersonDegree">
195 <s:sequence minOccurs="0">
196 <s:element name="PersonDegree" type="PersonDegree" minOccurs="0" maxOccurs="unbounded"/>
197 </s:sequence>
198 </s:complexType>
199 <s:complexType name="PersonDegree" xdb:SQLType="PersonDegree">
200 <s:sequence minOccurs="0">
201 <s:element name="Code" type="s:string" nillable="true"/>
202 <s:element name="Major" type="s:string" nillable="true"/>
203 <s:element name="ListingOrder" type="s:int"/>
204 <s:element name="GUID" type="s:string" nillable="true"/>
205 <s:element name="RecordStatus" type="s:string" nillable="true"/>
206 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
207 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
208 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
209 </s:sequence>
210 </s:complexType>
211 <s:complexType name="ArrayOfPersonSpecialty" xdb:SQLType="ArrayOfPersonSpecialty">
212 <s:sequence minOccurs="0">
213 <s:element name="PersonSpecialty" type="PersonSpecialty" minOccurs="0" maxOccurs="unbounded"/>
214 </s:sequence>
215 </s:complexType>
216 <s:complexType name="PersonSpecialty" xdb:SQLType="PersonSpecialty">
217 <s:sequence minOccurs="0">
218 <s:element name="Name" type="s:string" nillable="true"/>
219 <s:element name="GUID" type="s:string" nillable="true"/>
220 <s:element name="RecordStatus" type="s:string" nillable="true"/>
221 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
222 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
223 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
224 </s:sequence>
225 </s:complexType>
226 <s:complexType name="ArrayOfPersonType" xdb:SQLType="ArrayOfPersonType">
227 <s:sequence minOccurs="0">
228 <s:element name="PersonType" type="PersonType" minOccurs="0" maxOccurs="unbounded"/>
229 </s:sequence>
230 </s:complexType>
231 <s:complexType name="PersonType" xdb:SQLType="PersonType">
232 <s:sequence minOccurs="0">
233 <s:element name="Type" type="s:string" nillable="true"/>
234 <s:element name="GUID" type="s:string" nillable="true"/>
235 <s:element name="RecordStatus" type="s:string" nillable="true"/>
236 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
237 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
238 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
239 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
240 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
241 </s:sequence>
242 </s:complexType>
243 <s:complexType name="ArrayOfOrganizationSynonym" xdb:SQLType="ArrayOfOrganizationSynonym">
244 <s:sequence minOccurs="0">
245 <s:element name="OrganizationSynonym" type="OrganizationSynonym" minOccurs="0" maxOccurs="unbounded"/>
246 </s:sequence>
247 </s:complexType>
248 <s:complexType name="OrganizationSynonym" xdb:SQLType="OrganizationSynonym">
249 <s:sequence minOccurs="0">
250 <s:element name="Name" type="s:string" nillable="true"/>
251 <s:element name="GUID" type="s:string" nillable="true"/>
252 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
253 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
254 <s:element name="RecordStatus" type="s:string" nillable="true"/>
255 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
256 </s:sequence>
257 </s:complexType>
258 </s:schema>';
259 :xmltext1 :=
260 '<?xml version="1.0" encoding="WINDOWS-1252"?> <Person xsi:noNamespaceSchemaLocation="mcs.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns
:xsi="http://www.w3.org/2001/XMLSchema-instance">
261 <PersonID>100448</PersonID>
262 <Prefix/>
263 <FirstName>John</FirstName>
264 <MiddleName/>
265 <LastName>Doe</LastName>
266 <Suffix/>
267 <PreferredName/>
268 <Gender/>
269 <PrimaryLanguage xsi:nil="true"/>
270 <GUID>ffff-ffff-ffff</GUID>
271 <RecordStatus>Active</RecordStatus>
272 <RecordStatusDate>2007-04-29T00:11:50.750000-04:00</RecordStatusDate>
273 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
274 <LastModifiedDate>2007-04-29T00:11:50.770000-04:00</LastModifiedDate>
275 <QCDoneStatus>Yes</QCDoneStatus>
276 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
277 <PersonDegrees>
278 <PersonDegree>
279 <Code>B.S.</Code>
280 <Major xsi:nil="true"/>
281 <ListingOrder>1</ListingOrder>
282 <GUID>d01bbcfd-9d48-47bf-818d-9957b907a664</GUID>
283 <RecordStatus>Active</RecordStatus>
284 <RecordStatusDate>2006-10-05T10:48:04.430000-04:00</RecordStatusDate>
285 <CreatedDate>2006-10-05T10:48:06.520000-04:00</CreatedDate>
286 <LastModifiedDate>2006-10-05T10:48:06.520000-04:00</LastModifiedDate>
287 </PersonDegree>
288 </PersonDegrees>
289 <PersonSpecialties/>
290 <PersonTypes>
291 <PersonType>
292 <Type>Resource Personnel</Type>
293 <GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
294 <RecordStatus>Active</RecordStatus>
295 <RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
296 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
297 <LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
298 <QCDoneStatus>Yes</QCDoneStatus>
299 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
300 </PersonType>
301 </PersonTypes>
302 <Addresses/>
303 <ContactMechanisms/>
304 <ImportedDate>2007-04-30</ImportedDate>
305 </Person>';
306 :xmltext2 :=
307 '<?xml version="1.0" encoding="WINDOWS-1252"?> <OrganizationPersonAssoc xsi:noNamespaceSchemaLocation="mcs.xsd" xmlns:xsd="http://www.w3.org/2001
/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
308 <Name>Org Name Office</Name>
309 <LongName>Long Name</LongName>
310 <Description xsi:nil="true"/>
311 <FWANumber xsi:nil="true"/>
312 <GUID>dddd-dddd</GUID>
313 <CreatedDate>2006-05-18T18:59:01.500000-04:00</CreatedDate>
314 <LastModifiedDate>2006-05-18T18:59:01.500000-04:00</LastModifiedDate>
315 <RecordStatus>Active</RecordStatus>
316 <RecordStatusDate>2006-05-18T18:59:01.500000-04:00</RecordStatusDate>
317 <OrganizationTypes>
318 <OrganizationType>
319 <OrganizationID>30097</OrganizationID>
320 <Type>Agency</Type>
321 <QCDoneStatus>Yes</QCDoneStatus>
322 <QCDoneStatusDate>2006-05-18T18:59:01.513000-04:00</QCDoneStatusDate>
323 <SiteEstablishmentStatus xsi:nil="true"/>
324 <SiteEstablishmentStatusDate>0001-01-01T00:00:00.000000-05:00</SiteEstablishmentStatusDate>
325 <IPFNumber>0</IPFNumber>
326 <DUNSNumber>0</DUNSNumber>
327 <GUID>cfe9e9e0-68a3-45c9-81c0-74848523133b</GUID>
328 <CreatedDate>2006-05-18T18:59:01.513000-04:00</CreatedDate>
329 <LastModifiedDate>2006-05-18T18:59:01.513000-04:00</LastModifiedDate>
330 <RecordStatus>Active</RecordStatus>
331 <RecordStatusDate>2006-05-18T18:59:01.513000-04:00</RecordStatusDate>
332 <Associations>
333 <Association>
334 <Role>Employee</Role>
335 <GUID>9a9a9a-ababab</GUID>
336 <QCDoneStatus>Yes</QCDoneStatus>
337 <QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
338 <CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
339 <LastModifiedDate>2006-07-25T15:27:23.783000-04:00</LastModifiedDate>
340 <RecordStatus>Active</RecordStatus>
341 <RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
342 <Addresses>
343 <Address>
344 <StreetName1>123 Front St.</StreetName1>
345 <StreetName2 xsi:nil="true"/>
346 <StreetName3 xsi:nil="true"/>
347 <StreetName4 xsi:nil="true"/>
348 <CityName>City</CityName>
349 <CityGUID>234234</CityGUID>
350 <CityCreatedDate>2006-05-08T20:06:45.143000-04:00</CityCreatedDate>
351 <CityLastModifiedDate>2006-05-08T20:06:45.143000-04:00</CityLastModifiedDate>
352 <CityRecordStatus>Active</CityRecordStatus>
353 <CityRecordStatusDate>2006-05-08T20:06:45.143000-04:00</CityRecordStatusDate>
354 <StateName>New York</StateName>
355 <StateGUID>9fd469e1-4d4a-4f38-9def-50038e5ecca2</StateGUID>
356 <StateCreatedDate>2006-04-22T16:09:35.830000-04:00</StateCreatedDate>
357 <StateLastModifiedDate>2006-04-22T16:09:35.830000-04:00</StateLastModifiedDate>
358 <StateRecordStatus>Active</StateRecordStatus>
359 <StateRecordStatusDate>2006-04-22T16:09:35.830000-04:00</StateRecordStatusDate>
360 <CountryName>United States</CountryName>
361 <CountryCode>USA</CountryCode>
362 <CountryGUID>532d35dd-3a49-408a-a416-20c41e9c7997</CountryGUID>
363 <CountryCreatedDate>2006-04-22T15:30:47.000000-04:00</CountryCreatedDate>
364 <CountryLastModifiedDate>2006-04-22T15:30:47.000000-04:00</CountryLastModifiedDate>
365 <CountryRecordStatus>Active</CountryRecordStatus>
366 <CountryRecordStatusDate>2006-04-22T15:30:47.000000-04:00</CountryRecordStatusDate>
367 <ZipPostalCode>12345</ZipPostalCode>
368 <GUID>b2414fa9-7375-4d26-8d76-89a6915d6751</GUID>
369 <CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
370 <LastModifiedDate>2006-07-29T23:45:17.670000-04:00</LastModifiedDate>
371 <RecordStatus>Active</RecordStatus>
372 <RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
373 <Type>Office</Type>
374 <TypeOtherSpecify/>
375 <InternalOffice></InternalOffice>
376 <MailStopCode/>
377 <PreferredFlag>Yes</PreferredFlag>
378 <ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
379 <QCDoneStatus>Yes</QCDoneStatus>
380 <QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
381 </Address>
382 </Addresses>
383 <ContactMechanisms>
384 <ContactMechanism>
385 <ContactType>Phone</ContactType>
386 <ContactTypeOtherSpecify xsi:nil="true"/>
387 <ContactValue>555-5555</ContactValue>
388 <ContactAreaCode>555</ContactAreaCode>
389 <ContactCountryCallingCode>1</ContactCountryCallingCode>
390 <ContactTollFreeFlag xsi:nil="true"/>
391 <ContactGUID>123</ContactGUID>
392 <ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
393 <ContactLastModifiedDate>2007-02-23T16:36:10.260000-05:00</ContactLastModifiedDate>
394 <ContactRecordStatus>Active</ContactRecordStatus>
395 <ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
396 <Role>Business</Role>
397 <PhoneExtension/>
398 <QCDoneStatus>Yes</QCDoneStatus>
399 <QCDoneStatusDate>2006-06-13T01:29:09.047000-04:00</QCDoneStatusDate>
400 <ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
401 <GUID>321</GUID>
402 <CreatedDate>2006-06-13T01:29:09.047000-04:00</CreatedDate>
403 <ModifiedDate>2006-07-29T23:53:03.323000-04:00</ModifiedDate>
404 <PreferredFlag>Yes</PreferredFlag>
405 <RecordStatus>Inactive</RecordStatus>
406 <RecordStatusDate>2006-07-29T23:53:03.393000-04:00</RecordStatusDate>
407 </ContactMechanism>
408 <ContactMechanism>
409 <ContactType>Email</ContactType>
410 <ContactTypeOtherSpecify xsi:nil="true"/>
411 <ContactValue>[email protected]</ContactValue>
412 <ContactAreaCode xsi:nil="true"/>
413 <ContactCountryCallingCode>0</ContactCountryCallingCode>
414 <ContactTollFreeFlag xsi:nil="true"/>
415 <ContactGUID>ddd</ContactGUID>
416 <ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
417 <ContactLastModifiedDate>2006-06-13T01:29:09.047000-04:00</ContactLastModifiedDate>
418 <ContactRecordStatus>Active</ContactRecordStatus>
419 <ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
420 <Role>Business</Role>
421 <PhoneExtension xsi:nil="true"/>
422 <QCDoneStatus>Yes</QCDoneStatus>
423 <QCDoneStatusDate>2006-06-13T01:29:09.063000-04:00</QCDoneStatusDate>
424 <ActiveFromDate>2006-06-13T01:29:09.063000-04:00</ActiveFromDate>
425 <GUID>111</GUID>
426 <CreatedDate>2006-06-13T01:29:09.063000-04:00</CreatedDate>
427 <ModifiedDate>2006-06-13T01:29:09.063000-04:00</ModifiedDate>
428 <PreferredFlag>Yes</PreferredFlag>
429 <RecordStatus>Active</RecordStatus>
430 <RecordStatusDate>2006-06-13T01:29:09.063000-04:00</RecordStatusDate>
431 </ContactMechanism>
432 </ContactMechanisms>
433 <Persons>
434 <Person>
435 <PersonID>100448</PersonID>
436 <Prefix/>
437 <FirstName>John</FirstName>
438 <MiddleName/>
439 <LastName>Doe</LastName>
440 <Suffix/>
441 <PreferredName/>
442 <Gender/>
443 <PrimaryLanguage xsi:nil="true"/>
444 <GUID>123</GUID>
445 <RecordStatus>Active</RecordStatus>
446 <RecordStatusDate>2007-04-29T00:11:50.750000-04:00</RecordStatusDate>
447 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
448 <LastModifiedDate>2007-04-29T00:11:50.770000-04:00</LastModifiedDate>
449 <QCDoneStatus>Yes</QCDoneStatus>
450 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
451 <PersonTypes>
452 <PersonType>
453 <Type>Resource Personnel</Type>
454 <GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
455 <RecordStatus>Active</RecordStatus>
456 <RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
457 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
458 <LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
459 <QCDoneStatus>Yes</QCDoneStatus>
460 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
461 </PersonType>
462 </PersonTypes>
463 </Person>
464 </Persons>
465 </Association>
466 </Associations>
467 </OrganizationType>
468 </OrganizationTypes>
469 <ImportedDate>2007-04-30</ImportedDate>
470 </OrganizationPersonAssoc>
471 ';
472 end;
473 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaURL => :schemaURL
5 ,schemaDoc => :xmlSchema
6 ,local => TRUE
7 ,genBean => false
8 ,genTypes => TRUE
9 ,genTables => TRUE
10 ,enableHierarchy => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
11 );
12 end;
13 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:03.67
SQL> insert into Person values ( xmltype (:xmltext1))
2 /
1 row created.
Elapsed: 00:00:00.07
SQL> insert into org_person_assoc values ( xmltype (:xmltext2))
2 /
1 row created.
Elapsed: 00:00:00.03
SQL> commit
2 /
Commit complete.
Elapsed: 00:00:00.00
SQL> CREATE OR REPLACE VIEW XML_PERSON_ASSOCIATION
2 (PERSON)
3 AS
4 select
5 xmlelement("Person",
6 xmlforest(
7 extractvalue(value(p),'/Person/PersonID') "PersonID",
8 extractvalue(value(p),'/Person/Prefix') "Prefix",
9 extractvalue(value(p),'/Person/FirstName') "FirstName",
10 extractvalue(value(p),'/Person/MiddleName') "MiddleName",
11 extractvalue(value(p),'/Person/LastName') "LastName",
12 extractvalue(value(p),'/Person/Suffix') "Suffix",
13 extractvalue(value(p),'/Person/PreferredName') "PreferredName",
14 extractvalue(value(p),'/Person/Gender') "Gender",
15 extractvalue(value(p),'/Person/PrimaryLanguage') "PrimaryLanguage",
16 extractvalue(value(p),'/Person/RecordStatus') "RecordStatus",
17 extractvalue(value(p),'/Person/ImportedDate') "ImportedDate",
18 (select
19 xmlagg(
20 xmlelement("Association",
21 xmlforest(
22 extractvalue(value(oa),'/OrganizationPersonAssoc/Name') "Name",
23 extractvalue(value(ot),'/OrganizationType/OrganizationID') "OrganizationID",
24 extractvalue(value(ot),'/OrganizationType/Type') "OrganizationType",
25 extractvalue(value(a),'/Association/Role') "Role",
26 extractvalue(value(a),'/Association/RecordStatus') "RecordStatus",
27 extractvalue(value(oa),'/OrganizationPersonAssoc/ImportedDate') "ImportedDate"
28 ),
29 xmlelement("PersonTypes",
30 extract(value(per),'/Person/PersonTypes/PersonType')
31 ),
32 xmlelement("Addresses",
33 extract(value(a),'/Association/Addresses/Address')
34 ),
35 xmlelement("ContactMechanisms",
36 extract(value(a),'/Association/ContactMechanisms/ContactMechanism')
37 )
38 )
39 )
40 from org_person_assoc oa,
41 table(xmlsequence(extract(value(oa),'/OrganizationPersonAssoc/OrganizationTypes/OrganizationType'))) ot,
42 table(xmlsequence(extract(value(ot),'/OrganizationType/Associations/Association'))) a,
43 table(xmlsequence(extract(value(a),'/Association/Persons/Person'))) per
44 where extractvalue(value(per),'/Person/PersonID') = extractvalue(value(p),'/Person/PersonID')
45 ) "Associations"
46 )
47 ) person
48 from person p
49 /
View created.
Elapsed: 00:00:00.06
SQL> set autotrace on explain
SQL> --
SQL> set long 10000 pages 0 lines 150
SQL> --
SQL> select person
2 from xml_person_association o
3 where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1
4 /
<Person><PersonID>100448</PersonID><FirstName>John</FirstName><LastName>Doe</LastName><RecordStatus>Active</RecordStatus><ImportedDate>2007-04-30</Imp
ortedDate><Associations><Association><Name>Org Name Office</Name><OrganizationID>30097</OrganizationID><OrganizationType>Agency</OrganizationType><Rol
e>Employee</Role><RecordStatus>Active</RecordStatus><ImportedDate>2007-04-30</ImportedDate><PersonTypes><PersonType>
<Type>Resource Personnel</Type>
<GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
<CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
<LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
</PersonType>
</PersonTypes><Addresses><Address>
<StreetName1>123 Front St.</StreetName1>
<StreetName2 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<StreetName3 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<StreetName4 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<CityName>City</CityName>
<CityGUID>234234</CityGUID>
<CityCreatedDate>2006-05-08T20:06:45.143000-04:00</CityCreatedDate>
<CityLastModifiedDate>2006-05-08T20:06:45.143000-04:00</CityLastModifiedDate>
<CityRecordStatus>Active</CityRecordStatus>
<CityRecordStatusDate>2006-05-08T20:06:45.143000-04:00</CityRecordStatusDate>
<StateName>New York</StateName>
<StateGUID>9fd469e1-4d4a-4f38-9def-50038e5ecca2</StateGUID>
<StateCreatedDate>2006-04-22T16:09:35.830000-04:00</StateCreatedDate>
<StateLastModifiedDate>2006-04-22T16:09:35.830000-04:00</StateLastModifiedDate>
<StateRecordStatus>Active</StateRecordStatus>
<StateRecordStatusDate>2006-04-22T16:09:35.830000-04:00</StateRecordStatusDate>
<CountryName>United States</CountryName>
<CountryCode>USA</CountryCode>
<CountryGUID>532d35dd-3a49-408a-a416-20c41e9c7997</CountryGUID>
<CountryCreatedDate>2006-04-22T15:30:47.000000-04:00</CountryCreatedDate>
<CountryLastModifiedDate>2006-04-22T15:30:47.000000-04:00</CountryLastModifiedDate>
<CountryRecordStatus>Active</CountryRecordStatus>
<CountryRecordStatusDate>2006-04-22T15:30:47.000000-04:00</CountryRecordStatusDate>
<ZipPostalCode>12345</ZipPostalCode>
<GUID>b2414fa9-7375-4d26-8d76-89a6915d6751</GUID>
<CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
<LastModifiedDate>2006-07-29T23:45:17.670000-04:00</LastModifiedDate>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
<Type>Office</Type>
<TypeOtherSpecify/>
<InternalOffice/>
<MailStopCode/>
<PreferredFlag>Yes</PreferredFlag>
<ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
</Address>
</Addresses><ContactMechanisms><ContactMechanism>
<ContactType>Phone</ContactType>
<ContactTypeOtherSpecify xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactValue>555-5555</ContactValue>
<ContactAreaCode>555</ContactAreaCode>
<ContactCountryCallingCode>1</ContactCountryCallingCode>
<ContactTollFreeFlag xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactGUID>123</ContactGUID>
<ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
<ContactLastModifiedDate>2007-02-23T16:36:10.260000-05:00</ContactLastModifiedDate>
<ContactRecordStatus>Active</ContactRecordStatus>
<ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
<Role>Business</Role>
<PhoneExtension/>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.047000-04:00</QCDoneStatusDate>
<ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
<GUID>321</GUID>
<CreatedDate>2006-06-13T01:29:09.047000-04:00</CreatedDate>
<ModifiedDate>2006-07-29T23:53:03.323000-04:00</ModifiedDate>
<PreferredFlag>Yes</PreferredFlag>
<RecordStatus>Inactive</RecordStatus>
<RecordStatusDate>2006-07-29T23:53:03.393000-04:00</RecordStatusDate>
</ContactMechanism>
<ContactMechanism>
<ContactType>Email</ContactType>
<ContactTypeOtherSpecify xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactValue>[email protected]</ContactValue>
<ContactAreaCode xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactCountryCallingCode>0</ContactCountryCallingCode>
<ContactTollFreeFlag xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactGUID>ddd</ContactGUID>
<ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
<ContactLastModifiedDate>2006-06-13T01:29:09.047000-04:00</ContactLastModifiedDate>
<ContactRecordStatus>Active</ContactRecordStatus>
<ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
<Role>Business</Role>
<PhoneExtension xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.063000-04:00</QCDoneStatusDate>
<ActiveFromDate>2006-06-13T01:29:09.063000-04:00</ActiveFromDate>
<GUID>111</GUID>
<CreatedDate>2006-06-13T01:29:09.063000-04:00</CreatedDate>
<ModifiedDate>2006-06-13T01:29:09.063000-04:00</ModifiedDate>
<PreferredFlag>Yes</PreferredFlag>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T01:29:09.063000-04:00</RecordStatusDate>
</ContactMechanism>
</ContactMechanisms></Association></Associations></Person>
Elapsed: 00:00:00.42
Execution Plan
Plan hash value: 95656148
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 18040 | 9 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 10096 | | |
| 2 | TABLE ACCESS BY INDEX ROWID | SYS_NT32zHSpCZQ9ynComtqqKsrw== | 1 | 10096 | 2 (0)| 00:00:01 |
|* 3 | INDEX RANGE SCAN | SYS_C009300 | 1 | | 2 (0)| 00:00:01 |
| 4 | SORT AGGREGATE | | 1 | 48284 | | |
| 5 | TABLE ACCESS BY INDEX ROWID | SYS_NTjbkXqKq3S96fbEOM3Qs5Gg== | 1 | 48284 | 2 (0)| 00:00:01 |
|* 6 | INDEX RANGE SCAN | SYS_C009296 | 1 | | 2 (0)| 00:00:01 |
| 7 | SORT AGGREGATE | | 1 | 28187 | | |
| 8 | TABLE ACCESS BY INDEX ROWID| SYS_NTm2nBfKKNSGm6hs2e1Z0w/A== | 1 | 28187 | 2 (0)| 00:00:01 |
|* 9 | INDEX RANGE SCAN | SYS_C009297 | 1 | | 2 (0)| 00:00:01 |
| 10 | SORT AGGREGATE | | 1 | 13910 | | |
| 11 | NESTED LOOPS | | 1 | 13910 | 6 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 8131 | 5 (0)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 4097 | 4 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SYS_NT7Erd/G5iSPWX9w20Z5cNRg== | 1 | 43 | 3 (0)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID | SYS_NTQWY/m3uES5GM7AByRclr8A== | 1 | 4054 | 1 (0)| 00:00:01 |
|* 16 | INDEX UNIQUE SCAN | SYS_C009310 | 1 | | 0 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SYS_NTTiDHMvB7RbSEfNxho66yQg== | 1 | 4034 | 1 (0)| 00:00:01 |
|* 18 | INDEX UNIQUE SCAN | SYS_C009314 | 1 | | 0 (0)| 00:00:01 |
| 19 | TABLE ACCESS BY INDEX ROWID | ORG_PERSON_ASSOC | 1 | 5779 | 1 (0)| 00:00:01 |
|* 20 | INDEX UNIQUE SCAN | SYS_C009320 | 1 | | 0 (0)| 00:00:01 |
|* 21 | FILTER | | | | | |
| 22 | TABLE ACCESS FULL | PERSON | 1 | 18040 | 3 (0)| 00:00:01 |
| 23 | NESTED LOOPS | | | | | |
| 24 | NESTED LOOPS | | 1 | 5893 | 6 (0)| 00:00:01 |
| 25 | NESTED LOOPS | | 1 | 2125 | 5 (0)| 00:00:01 |
| 26 | NESTED LOOPS | | 1 | 93 | 4 (0)| 00:00:01 |
|* 27 | TABLE ACCESS FULL | SYS_NT7Erd/G5iSPWX9w20Z5cNRg== | 1 | 43 | 3 (0)| 00:00:01 |
|* 28 | TABLE ACCESS BY INDEX ROWID| SYS_NTQWY/m3uES5GM7AByRclr8A== | 1 | 50 | 1 (0)| 00:00:01 |
|* 29 | INDEX UNIQUE SCAN | SYS_C009310 | 1 | | 0 (0)| 00:00:01 |
|* 30 | TABLE ACCESS BY INDEX ROWID | SYS_NTTiDHMvB7RbSEfNxho66yQg== | 1 | 2032 | 1 (0)| 00:00:01 |
|* 31 | INDEX UNIQUE SCAN | SYS_C009314 | 1 | | 0 (0)| 00:00:01 |
|* 32 | INDEX UNIQUE SCAN | SYS_C009320 | 1 | | 0 (0)| 00:00:01 |
| 33 | TABLE ACCESS BY INDEX ROWID | ORG_PERSON_ASSOC | 1 | 3768 | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
3 - access("NESTED_TABLE_ID"=:B1)
6 - access("NESTED_TABLE_ID"=:B1)
9 - access("NESTED_TABLE_ID"=:B1)
14 - filter("SYS_NC_TYPEID$" IS NOT NULL AND "PersonID"=:B1)
15 - filter("SYS_NC_TYPEID$" IS NOT NULL)
16 - access("NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$")
17 - filter("SYS_NC_TYPEID$" IS NOT NULL)
18 - access("NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$")
20 - access("NESTED_TABLE_ID"="OA"."SYS_NC0002100022$")
21 - filter( EXISTS (SELECT 0 FROM "XDBTEST"."SYS_NT7Erd/G5iSPWX9w20Z5cNRg=="
"SYS_ALIAS_1","XDBTEST"."SYS_NTQWY/m3uES5GM7AByRclr8A=="
"SYS_ALIAS_3","XDBTEST"."SYS_NTTiDHMvB7RbSEfNxho66yQg==" "SYS_ALIAS_0","XDBTEST"."ORG_PERSON_ASSOC" "OA"
WHERE "SYS_ALIAS_0"."NESTED_TABLE_ID"="OA"."SYS_NC0002100022$" AND
"SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$" AND "SYS_ALIAS_0"."SYS_NC_TYPEID$" IS
NOT NULL AND TO_NUMBER("SYS_ALIAS_0"."OrganizationID")=30097 AND
"SYS_ALIAS_4"."NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$" AND "SYS_ALIAS_1"."SYS_NC_TYPEID$" IS
NOT NULL AND "SYS_ALIAS_4"."SYS_NC_TYPEID$" IS NOT NULL AND "SYS_ALIAS_4"."PersonID"=:B1))
27 - filter("SYS_ALIAS_4"."SYS_NC_TYPEID$" IS NOT NULL AND "SYS_ALIAS_4"."PersonID"=:B1)
28 - filter("SYS_ALIAS_1"."SYS_NC_TYPEID$" IS NOT NULL)
29 - access("SYS_ALIAS_4"."NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$")
30 - filter("SYS_ALIAS_0"."SYS_NC_TYPEID$" IS NOT NULL AND
TO_NUMBER("SYS_ALIAS_0"."OrganizationID")=30097)
31 - access("SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$")
32 - access("SYS_ALIAS_0"."NESTED_TABLE_ID"="OA"."SYS_NC0002100022$")
Note
- dynamic sampling used for this statement
SQL> select extract(person,'/Person/Associations/Association')
2 from xml_person_association o
3 where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1
4 /
<Association><Name>Org Name Office</Name><OrganizationID>30097</OrganizationID><OrganizationType>Agency</OrganizationType><Role>Employee</Role><Record
Status>Active</RecordStatus><ImportedDate>2007-04-30</ImportedDate><PersonTypes><PersonType><Type>Resource Personnel</Type><GUID>3049ddcd-3590-4fd9-a5
34-e2cea5b82c09</GUID><RecordStatus>Active</RecordStatus><RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate><CreatedDate>2006-06-13T
00: -
Download doc problem when copied from APEX_APPLICATION_FILES to local table
Good morning!
As the subject indicatesm, I am experiencing problems downloading a document I have copied from APEX_APPLICATION_FILES to my local table FILE_SUBJECTS
and would be very grateful if someone could help.
Here is the problem:
I can successfully upload a document into APEX_APPLICATION_FILES and dowload it from there too.
I can copy the record from APEX_APPLICATION_FILES into my local table FILE_SUBJECTS and delete that entry from APEX_APPLICATION_FILES but I cannot download it from my local table, it keeps pointing me to a page which cannot be found, so I'm guessing there is something wrong with either, my INSERT INTO statement or, my link in the report.
My INSERT INTO statement is:
INSERT INTO file_subjects (id,filename,updated_by,updated_on,blob_content,mime_type)
SELECT id, filename, name, updated_by, updated_on,blob_content,mime_type
FROM APEX_APPLICATION_FILES
WHERE APEX_APPLICATION_FILES.filename = :P2_FILE_NAME;
REPORT LINK
I have tried just a normal column link in my report like: #ID# (this works when looking at APEX_APPLICATION_FILES)
but I have also tried the following:
#OWNER#.DOWNLOAD_MY_FILE?p_file=#ID#
where download_my_file is a procedure:
create or replace PROCEDURE "DOWNLOAD_MY_FILE" (p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
--apex_application.g_flow_id := 166;
--if not(APEX_CUSTOM_AUTH.IS_SESSION_VALID) then
-- owa_util.status_line(404, 'Page Not Found', true);
-- return;
--end if;
SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM FILE_SUBJECTS
WHERE id = p_file;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end DOWNLOAD_MY_FILE;
Many thanks in advance!
SueSue,
If you are running XE or running with the EPG versus the http server, you need to grant access to the procedure you are using for it to be run properly..
You may need to look at this function, if you are using XE or have the EPG setup for your database.. http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e12856/adm_wrkspc.htm#BABEFDHI [Look for the section called *Restricting Access to Oracle Application Express by Database Access Descriptor (DAD)*]
Thank you,
Tony Miller
Webster, TX -
hi All...
I'm using copy express to copy user defined tables and UDO's from one system to other whose database is not shared....it works fine.only problem is it doesnot copy whole data from table UDO2 to other UDO2..
Thanks.......Hi,
you could search the copy express EES pdf file from SAP market place:
https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000658846&_SCENARIO=01100035870000000183&_ADDINC=&_OBJECT=011000358700000050892007E
Rgds, -
Problem while copying from model node to value node!!
Hi All,
I am trying to copy the contents of model table to newly created value table. For this i have written following code -
IWDNode targetnode = wdContext.nodeZhress_Firstday_Service_ValueNode();
IWDNode sourcenode = wdContext.nodeOutput().nodeT_Zhress_Firstday_output();
WDCopyService.copyElements(sourcenode,targetnode);
tagetnode is the node which is created in root context and sourcenode is the node which the node that shows the output when RFC runs.
After that by using copyService i m trying to copy from source to targetnode.
This target node is also binded to table, for getting the output.
When i copied the things from source to target it's size is equivalent to source node but its not getting any data from source node and showing blank in the table.
When i have tried to get whats it showing, its showing me null .
Please help me on this problem.
Regards,
Roshan Guptahi
check out this threads
Re: WDCopyService - copy model node to Value node
WDCOPYSERVICE
Value of attribute not copied after WDCopyService.copyElements
Regards,
Gopi -
File access privilege problem when copying from 9.2.2 to 10.5.6
Hello,
I have two Macs (one running MacOS 9.2.2, the other running 10.5.6) connected with an ethernet crossover cable. FileSharing over TCP/IP is enabled on both machines. When copying files from the 9.2.2 machine to the OS X one (initiated from the OS X side), after some files have been copied, I get an (OS X) error message to the effect of "insufficient file privileges for file "AppleShare PDS"", followed by a message "insufficient privileges for "Macintosh HD"" ("Macintosh HD" is the volume's name the data is copied from), after which copying terminates.
The FileSharing connection to the 9.2.2 machine is established using the only user on that machine, who has read/write rights on the entire source volume.
Both volumes have been checked with the respective OS's disk utilities and reported OK.
Any ideas how to solve this?Hi, chap -
You might try restarting, then immediately hold the mouse button down, keep it held down until booting has finished. That's a hardware-based command to the Mac to eject all removable media.
You can download any needed firmware update for your iMac from these Apple Kbase articles -
Article #58174 - iMac: When to Install Available Updaters
Article #86117 - Firmware Updates
As eww suggests, reposting to the iMac CRT forum may be of benefit; there are sometimes model-specific peculiarities when it comes to migrating from OS 9 to OSX. -
Problem using writeToSource from ORDDoc
Hi
I have some problem using writeToSource
it works it writs on the source but not at the end
it writes at 1st starting position
how i can handle that problem
tanxHi larry
Thanx for cooperation
i am using some way to use lob data but
not pointer execption is really great problem for me
i am giving code an exception too read an give me some suggestions
public void append(String sid)
throws SQLException, ServletException, IOException
String comm1="";
if (conn == null)
getConnection();
conn.setAutoCommit(false);
stmt =(OraclePreparedStatement)conn.prepareStatement(
"select doc from doc_table where doc_number = ? for update");
stmt.setString(1,sid);
if (rset.next())
doc1 = (OrdDoc)rset.getCustomDatum(1,OrdDoc.getFactory() );
}else
rset.close();
stmt.close();
stmt.close();
stmt =(OraclePreparedStatement)conn.prepareStatement(
"select comm from doc_table where doc_number = ?");
stmt.setString(1,sid);
if (rset.next())
comm1 = rset.getString(1);
else
rset.close();
stmt.close();
stmt.close();
byte [][]ctx = new byte[1][64];
byte[] buf = new byte[comm1.length()];
buf = comm1.getBytes();
BLOB doc2 = doc1.getContent();
OracleCallableStatement open_st =
(OracleCallableStatement) conn.prepareCall(
"BEGIN " +
" DBMS_LOB.CREATETEMPORARY(doc2,TRUE,DBMS_LOB.SESSION); "+
" DBMS_LOB.OPEN(doc2,DBMS_LOB.LOBREADWRITE);"+
" DBMS_LOB.WRITEAPPEND(doc2,comm1.length(),comm1);" +
" END;");
//open_st.registerOutParameter(1,doc2);
//open_st.registerOutParameter(2,comm1.length());
// open_st.registerOutParameter(3,comm1);
open_st.execute();
close_st =(OracleCallableStatement)conn.prepareCall(
"BEGIN DBMS_LOB.CLOSE(?); END;");
BLOB temp = open_st.getBLOB(1);
InputStream in = temp.getBinaryStream();
doc1.loadDataFromInputStream(in);
in.close();
//close_st.setBLOB(1,temp);
stmt = (OraclePreparedStatement)conn.prepareStatement(
"update doc_table set doc = ? where doc_number = ? ");
stmt.setCustomDatum(1,doc1);
stmt.setString(2,sid);
stmt.execute();
rset.close();
stmt.close();
conn.commit();
java.lang.NullPointerException
at SQLObject.append(SQLObject.java:64)
at demo.sample._comments._jspService(_comments.java:136) -
Problem using iTunes from Public Terminal
My problem is downloading from certain Public Terminals that will not allow iTunes to be installed and the IT at the local library refuse to allow it to be installed.
At home, I am on low-speed dial-up (56k) that prevent me from downloading TV Shows due to numerous time-outs and length of time for downloading.
Is there anyway I can access the iTunes store and download without having iTunes installed on the Public Terminal?
Currently, every few weeks, I go to the nearest University and use their Public Terminals to download material, but would prefer to use the local public library as it is much closer, and I could download more stuff.
Thank You for your assistance in this matter.I have no experience with anything this author advises. It sounds interesting, though and may provide you with direction.
http://www.lifehacker.com/software/feature/hack-attack-the-selfsustaining-ipod-1 51662.php -
Problem using Tuxedo from different network
We are using Tuxedo (7.1) with Clarify eFrontOffice.
We are trying to access Tuxedo from a different network. We have a NAT address and opened the port for WSL (48800) and also a range (specified in the ubbconfig and compiled) specified for the WSH. When the Clarify client is started, it is connecting to the WSL on port 48800. When tuxedo returns the WSH port to the Client, it is also returning the IP of the server. Since the IP is not recognized in the 2nd network the communication is failing. Is there a way to retun server name instead of IP or a different IP?
ThanxRaju,
When using Network Address Translation with /WS you should specify the -H
option to WSL (after the -- option) so that the address of the WSH can be
mapped back to an address that the client will understand. A bug related to
the WSL -- -H option was fixed at Tuxedo 7.1 rolling patch level 165, so you
should obtain the latest 7.1 rolling patch if you are running at an earlier
patch level.
The description of the -H option at
http://e-docs.bea.com/tuxedo/tux71/html/rf537.htm is as follows:
[-H external-netaddr]
Specifies the complete network address to be used as a well known address
template of the WSH process. The address will be combined with a WSH network
address to generate a well known network address used by the Workstation
client to connect to a WSH process. It has the same format as the -n option
except that it substitutes the port number with same length of character M
to indicate the position of the combined network address will be copied from
the WSH network address. For example when address template is
0x0002MMMMdddddddd and WSH network address is 0x00021111ffffffff then the
well known network address will be 0x00021111dddd dddd. When address
template starts with "//" network address type assumes to be IP based and
the TCP/IP port number of WSH network address will be copied into the
address template to form the combined network address. This feature is
useful when Workstation client needs to connect to a WSH through a router
which performs Network Address Translation.
<Raju Vatsavayi> wrote in message news:[email protected]...
We are using Tuxedo (7.1) with Clarify eFrontOffice.
We are trying to access Tuxedo from a different network. We have a NATaddress and opened the port for WSL (48800) and also a range (specified in
the ubbconfig and compiled) specified for the WSH. When the Clarify client
is started, it is connecting to the WSL on port 48800. When tuxedo returns
the WSH port to the Client, it is also returning the IP of the server. Since
the IP is not recognized in the 2nd network the communication is failing. Is
there a way to retun server name instead of IP or a differen
t IP?
Thanx -
I am using the below mentioned query to insert data from remote table to a local table.
alter table <table_name> no logging;
copy from &sq_source_user/&sq_source_pass&sq_source_inst insert <table_name> -
using select * from <table_name>;
alter table CMF logging;
can i use /*+ APPEND */ for not generating the archieve logs. I mean will it be useful ? as even specifying the no logging in above query generates the logs.This seems to be a syntax error.
copy from &sq_source_user/&sq_source_pass&sq_source_inst insert /*+ APPEND */ <table_name> -@sq_source_inst (You are saying & insted of @)
i.e. COPY FROM &user/&password@instance_name ... ... ...
If you have an access to metalink, please take a look at the Doc ID: Note:165524.1
Regards,
Sabdar Syed.
Message was edited by:
Sabdar Syed -
Problem using read from spreadsheet file and polar plotting
Hi to all labview users,
i am a beginner in labview and i am trying to do a polar plot.
i read the polar plotting example in labview and it was straightforward.
I used "write to spreadsheet file" to gather data.
and they are in the following format
13 10
4 20
8 30
....etc
now. i tried using "read from spreadfile" to get the data into a array, then using "array to cluster" to convert the array into cluster, so i could connect it to the polar plot block
however, it kept saying i couldnt connect that way, because polar plot uses 1-d array with cluster of 2 element and my source is a cluster of 9 elements....
but doesnt the "read from spreadfile" block give me a 1-d array? and where does that 9 come from? i only have 3 rows and 2 columns in my data file....
any guidance would be greatly appreciated.
thx alot
Happy guy
~ currently final year undergraduate in Electrical Engr. Graduating soon! Yes!
~ currently looking for jobs : any position related to engineering, labview, programming, tech support would be great.
~ humber learner of LabVIEW lvl: beginner-intermediateHelllo,
I've made an example to try to help you with that question.
Notes:
- the file must have values separeted by tab
- reading the values from file as you mentioned using "read from spreadfile" you'll get a 2D array and not 1D;
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL
Attachments:
Read Table and plot polar graph.vi 26 KB
teste.txt 1 KB -
Problems using TimeMachine from two Macs to IOMega Home Media Drive
Hi,
This has been driving me crazy for a couple of weeks now, so I'm hoping that someone here can point me in the right direction.
I have a PPC G5 and my wife uses an iMac. I recently bought an IOMega Home Media Drive and wanted to use it with TimeMachine. I set up the G5 and got that working, but when I tried to add my wife's iMac I've had nothing but problems.
I tried resetting the IOMega back to factory defaults, deleting and then re-creating the backups folder, using usernames and passwords or a guest account, and nothing seems to work. I occasionally do something that breaks it on the G5 (running 10.5.8) but I have been able, for the most part, to get it working again, but it's never worked from my wife's iMac (running 10.6.2).
I even tried creating the sparsebundles by hand and copying them in which seemed to work on the G5 but not on the iMac. I thought that the problem might be trying to back up two systems to the same share, but I'm not sure how to split them. Is there a way to create separate backup shares on the IOMega (which seems to connect using AFP even though I've seen references to SMB in some of the forums) so that each system would use its own? Is there a general problem when trying to back up two Macs to the same network share?
The error that I tend to get is that the "backup volume is read only". On the iMac the current error I'm getting, after creating the hostname.sparsebundle image (oddly enough when TimeMachine tried creating it yesterday it dropped the MAC address...not sure why), is: "/Volumes/backups-1/hostname.sparsebundle could not be created (error 45)."
Any help would be greatly appreciated, this has been very frustrating.
Thanks,
RobHi,
You don't want to hear this, but Time Machine does not back up to network drives, except Time Capsules or a shared drive on another Mac running Leopard or Snow Leopard on the same local network. It will often back-up to a USB drive connected to an Airport Extreme, but even that is, technically, unsupported, and may require running a special Terminal command to make it work.
Here's the official word: http://support.apple.com/kb/HT1733
You may find some hardware or "hacks" that might make it work, in some cases, to a degree. But use them at your own risk.
First, since this is *unsupported by Apple,* there's nowhere to go when there's trouble.
Second, you're risking a future update preventing it from working, and perhaps rendering your backups useless.
No guarantees, of course, but this might help: https://iomega-na-en.custhelp.com/cgi-bin/iomegana_en.cfg/php/enduser/std_adp.php?p_faqid=22012&p_created=1246919828&p_sid=KBbtj nNj&p_accessibility=&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PWRmbHQmcF9 ncmlkc29ydD0mcF9yb3dfY250PTEwLDEwJnBfcHJvZHM9MTAzMSwxMDQzJnBfY2F0cz0mcF9wdj0yLjE wNDMmcF9jdj0mcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MSZwX3NlYXJjaF9 0ZXh0PXRpbWUgbWFjaGluZQ**&p_li=&ptopview=1 -
Problems using CVS from worksho 81
I tried to configure my workshop81 to use CVS (password server). But I get the
following exception when I try to update any file from the workshop.
update starting...
Caught exception: CreateProcess: cvs -d:pserver:pavasthi@newark:/opt/apps/cvsroot
update -A -l admin/admin.jsp error=2
update finished.
I would appreciate any help.
Prachi.Hi everybody,
I have exactly the same pb as your. If I copy the CVS command created by Workshop,
it's working in the command line.
Have you guys found a workaround for this bug ?
What is BEA saying about that ???
Adrien
"Karthi" <[email protected]> wrote:
Hi Prachi & Anurag,
I am also having the same problem when using CVS with ntserver.
I have also done the same as what Anurag told to Prachi.
I did the Module import and check out successfully .
In the release notes of Workshop 8.1 in KL Section it has been that we
should use Source view of the code in workshop. I did so.
But none of the CVS options worked for me from with in Workshop , all
of
them are working from WinCVS.
It means that we can't use the CVS option of WLW 8.1(SP1) and we have
to
depend on the command line or use WinCVS.
Any help ??
Thanks,
Karthi
"Prachi" <[email protected]> wrote in message
news:[email protected]...
Thanks a lot for replying Anurag.
I think I have already done that but not from the command line though.I
use WinCVS.
But that shouldn't make a difference, right . I checked out the modulefrom CVS.
Then I went to Workshop->Tools->Application Properties ->Source Controland set
all the required fields.
After that if I try to use any CVS command from the workshop, it throwsthe exception
that I mentioned before.
Is there anything else I need to do ?
"Anurag" <[email protected]> wrote:
Prachi,
You need to first import and checkout any Workshop application which
you
configure from CVS, from the command line. Can you confirm whether
you
have
done that?
For example, you can follow the following instructions:
1. set CVSROOT=:pserver:[email protected]:/home/cvs
2. cd to the directory "myApp" which is my Workshop applicationdirectory,
where I imagine "v1" is an arbitrary string indicating the versionnumber.
cvs import myApp v1
3. cd to the parent directory of "myApp" and
cvs checkout myApp
Let me know if you need any further help.
Regards,
Anurag
"prachi" <[email protected]> wrote in message
news:[email protected]...
I tried to configure my workshop81 to use CVS (password server).
But
I
get the
following exception when I try to update any file from the workshop.
update starting...
Caught exception: CreateProcess:cvs -d:pserver:pavasthi@newark:/opt/apps/cvsroot
update -A -l admin/admin.jsp error=2
update finished.
I would appreciate any help.
Prachi. -
Problem using content from content server in portlet.
Hi all,
I create a JSR286 portlet project, add a content server connection then drag content from those connection to jspx by selected create > document - content presenter.
Problem occur when i deploy the project to portlet managed server.
I'm not sure any mds they required because while deploying the Deploymeny Configuration was poped up to prompt me select mds repository.
I don't know what mds repository they required.
Please help.
Regards.Hi ngsankar,
Thanks for your reply.
I have no idea about any schema ;(
on the integrated weblogic server i can't deploy too.
Is it possible to use any content from content server in portlet like on portal?
Regards.
Maybe you are looking for
-
I am migrating from Outlook to Thunderbird. I have purchased a new computer running windows 8. I have copied the outlook data file from my old computer to he new computer. I have installed Thunderbird on my new computer. I try to import existing emai
-
Someone please help!! I had an old crap laptop that wasn't apple and I used that for the past 2 years to sync my iPod but I have got rid of that and now I have an iMac. I have forgotton the 4 number digit passcode to my ipod and I have tried about 25
-
How can i transfer a movie from mac book pro to external hard drive? I have tried dragging but it is like my hard drive has a block on it? Please help
-
Looping an animation twice then stop
I have a banner that needs to play twice and then stop. Its 15 seconds and besides copying all the frames and pasting at the end to get this effect I want to do it with AS. Currently the animation is four mc's appearing at different frames in the mai
-
Degraded Text Image Quality with Reader 9
I upgraded to Adobe Reader 9, which I use to open an online daily publication. However, with Reader 9, print quality of this publication (an online newspaper) is now severely degraded, to the point where I have to enlarge the image to about 400% in o