Keynote '08 files won't open after cable replacement

After what I've read, I'm so glad I didn't have the Apple Store install Maverick when the cable had to be replaced in my MacBook Pro as a work around to a possible drive failure. I thought I had successfully reinstalled everything via disk and back up restoration, but no, my Keynote '08 files won't open in the original program that created them and need "a newer version." Not acceptable. Can someone help me with this? I teach and need my original files for editing!

I presume you mean Keynote version 4, part of the iWork 08 suite, (there is no version 08)
1 - Delete the complete iWork 08 installation, you must use an application removal tool to do this correctly.
2 - (Appcleaner from Mac Update is free and works perfectly for this)
3 - Re-install iWork from the Installation CD and test

Similar Messages

HT1338 exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

I use the free Unarchiver: http://unarchiver.c3.cx/unarchiver
I have just tested it on a self-extracting Windows Internet Explorer and it opened it first time on my Mac.
However, as you have been told, normally Windows executable files cannot be opened or used on Macs.

PDF file won't open after saving it from the web. get error message file is damaged.

My PDF files won't open after saving them to Docs from the web. I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion?

I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ).

FCE file won't open after upgrading to Leopard

After upgrading a Dual 1.8 GHz PowerPC G5 from OS 10.4.x Tiger to OS 10.5.8 Leopard, a Final Cut Express file on an external HD will no longer open. The error message is “File Error: Access Denied.”
Other files on the external drive using other applications launch with no problem.
The FCE file opens OK on another Mac running OS 10.6.
Any suggestions?

Different OSes handle it differently, besides the normally hidden UIDs.
I wonder if ACLs got enabled on those other drives?
http://x704.net/bbs/viewtopic.php?f=12&t=2180&p=26242

PDF files won't open after upgrade from 9 to 10 or 11

After upgrading from Reader 9 to Reader 10, I lost the ability to open PDF files on my Win 7 laptop. Even the icons became blank white blocks. I reinstalled Reader 9 and it all worked as usual. In trying Reader 11, it happened again. Any thoughts?

Thank you for your reply. Allow me to clarify.
After installing Reader 10 or 11, the icons for PDFs on my desktop changed from the typical PDF icon to a blank white icon like when the extension of a file has been changed or omitted. Double clicking the icon no longer opens the PDF file. Yes, Reader opens but I no longer was able to open any preexisting PDF files using the new version of Reader. I did try changing away from protected mode to no avail.
I do not have a screen shot as I have downgraded to Reader 9. I have scanned thoroughly for malware and viruses and none have been found.
Thank you again. I look forward to your further comments.
Sent from my iPhone.
Please pardon brevity, misspellings, and autocorrect hijinks.

Pages (and Keynote and Numbers) won't open after restore from Time Machine.

Hi, I tried to open my iWork suite tonight and kept getting an error message 'Pages cannot be opened because of a problem' followed by the text, below. Has anyone got any idea what I have done? What I need to do to get them back working?
Recently I did have a big clean up of my Mac Pro - which included drive renaming/home drive rename and relocation - all seems to be working fine for a few months until I've tried to use these applications for the first time tonight. Even restoring them from my Time Machine hasn't helped).
I'd be so grateful if someone can give me some useful advice. Thanks.
Process:         Pages [309]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.1 (923)
Build Info:      Pages-9230000~1
Code Type:       X86 (Native)
Parent Process: launchd [147]
Date/Time:       2012-05-22 23:42:19.613 +0100
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Interval Since Last Report:          759690 sec
Crashes Since Last Report:           13
Per-App Crashes Since Last Report:   9
Anonymous UUID:                      779C5716-342A-4D50-B245-EB15F0CEBE72
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
    0x1000 -   0x345fe8 com.apple.iWork.Pages (4.1 - 923) <CA075805-8E22-2F83-8911-ED378A10FA8D> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x8fe0d000 - 0x8fe3faa7 dyld (195.6 - ???) <3A866A34-4CDD-35A4-B26E-F145B05F3644> /usr/lib/dyld
0x9b353000 - 0x9b3d2ff7 com.apple.iLifeMediaBrowser (2.6.3 - 502.3.12) <2A8A782C-0799-3CB9-A1AE-13743B7EFECF> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 8 GB, SMC 1.25f4
Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5031323541373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5031323541373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5031323541373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5031323541373243503844332D5335
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en2
PCI Card: NVIDIA GeForce 8800 GT, sppci_displaycontroller, Slot-1
Serial ATA Device: ST3750640AS P, 750.16 GB
Serial ATA Device: ST3750640AS P, 750.16 GB
Serial ATA Device: ST3750640AS P, 750.16 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A, 770.1 MB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB 2.0 Hub, 0x050d (Belkin Corporation), 0x0304, 0xfd400000 / 3
USB Device: HTC, 0x0bb4 (HTC Corporation), 0x0cd6, 0xfd410000 / 8
USB Device: Logitech Camera, 0x046d (Logitech Inc.), 0x09a6, 0xfd420000 / 7
USB Device: FOCAL XS, 0x08bb (Texas Instruments Japan), 0x2704, 0xfd430000 / 6
USB Device: hub_device, apple_vendor_id, 0x9122, 0xfd300000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd330000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd332000 / 9
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x921e, 0xfd320000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: Ultra Max USB/1394 00, Iomega Corporation, 800mbit_speed
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: OEM ATA Device 00, G-TECH, 800mbit_speed

I am getting the same exact error message, but I do not have Time Machine, so I cannot restore my system. I noticed that Pages would not load after I updated OS X to 10.7.4 on my MacBook Air. I also have an iMac at home that has Pages installed. I had not updated the iMac to 10.7.4 yet, and I was able to open Pages. I next tried to open the version of Pages on my iMac while accessing it remotely on my Air. It gave the same message. Do you have any idea how I can fix this?

Iphoto won't open after i replaced my iphoto 08 with iphoto '11

I recently replaced my iphoto '08 in my macbook pro running under lion with iphoto '11. i did the same with all the other ilife 11. they all worked except iphoto. As i was replacing iphoto 08 with iphoto '11 the previous iphoto 08 files were deleted in the applications folder. the new iphoto doesnt work and when i try to load back the old iphoto 08 doesnt work as well. I copied the ilife files from ma co_worker with a macbook pro 13inch, same as mine. any help please,.i have tried to solve this with no success.

this is the error that comes,
iphoto can not be opened because of a problem.
check with the developer to make sure iphoto works with this version of mac os. you may need to reinstall the application. be sure to install any available updates for the aplication and mac os x.
i have installed all the updates including the iphoto latest updates. but it wouldnt solve the problem. any help please

I have the latest version of keynote but it won't open files....says I need a newer version

Latest Keynote app was downloaded wirh Maverick update. My keynote files won't open and error message says I need to download latest version. I cannot download newer version (have latest version already) because my purchases say I have already installed it. Any ideas how to fix this?

I have just the same issue. I have the latest version installed. I did work on the file this afternoon, cannot open it anymore with the current version of Keynote (6.2)
It seems that Keynote fails to save the presentation in the right way.
In the Finder the Show package contents command is active when Control-clicking the file. Keynote files that open correctly in Keynote do not offer to show their package contents. I also realized that the .key file not opening is only 135 KB, which is pretty scarce for a presentation.
I suppose this is a file corruption issue, which is needed to fixed by Apple. I'm affraid the contents of those files are gone.

Keynote (6.2) file won't open. Can I make a new Index.zip file using some of the extracted .iwa files?

Keynote (6.2) file won't open (hung and crashed during auto-OS update). Trying to salvage everything possible. I know about grabbing the pictures from Data folder, but is there a way to extract the good .iwa files and make a new Index.zip?
Tried extracting, capturing uncorrupted .iwa and deleting corrupted ones, but can't figure out how to re-compress to readable format for Keynote. Seems silly that I can't ge the new .zip file to work. There has to be some sort of manual work-around, yeah?
Thanks.

This problem has been reported to the AppleWorks team, but I doubt that we will ever hear if there is a fix. AppleWorks 6 is now nearly 6 years old & hasn't even had an update since March, 2004.
Nothing has been found to be able to make AppleWorks 6.2.9 open the problem files. I've had it happen & not happen with all AppleWorks file types. These files can be opened by any other version of AppleWorks 6, including the OS 8/9 component 6.2.8. If you have the retail version of AppleWorks & have Classic installed, you can "Force" AppleWorks 6 to open in Classic to open the files, save them as AW 6 files & then open them in the OS X version. You do want to make sure you don't have both the Classic & OS X versions of AppleWorks 6 running at the same time. I find it much easier to use AppleWorks 5 in Classic to open & save the files. AppleWorks 6.2.9 has no problem opening AppleWorks 5 files.
Peggy

My microsoft word and excel programs won't work and files won't open.

After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open. What caused this and what can I do to fix the problem without losing my files? I have files that are part of my work and I HAVE to have them ASAP. Please help.
Thanks in advance.

Hi
Please find the steps to resolve your issue.
Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
Click the update that you want to remove, and then click Uninstall. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Or Try this step
If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
Start in search box type System Restore then click on it then select the Date where unit was working fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

ITunes won't open after update; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5

iTunes won't open after update - help, please; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5.

i had a problem similar to yours and better yet, i have the fix for it. i downloaded maverick 4 months ago and was without itunes ever since. all itunes icon did was bounce. itunes would never open and whats more, is when i would try to update it, i would get a "thank you for downloading itunes!" page , but the download would never work. so i scoured the net for solves. nothing that worked. <4 months later> then last night i took a new approach. i decided even though maverick would not allow me to uninstall itunes, i would find a way to uninstall itunes. then i would reinstall back to 11.1.5 i was successful and heres what i did.
step one-
Back up your iTunes Library.itl file, found under ~/Music/iTunes
(even tho i didnt, i only had 3 artists in there at the time. and they didnt get erased but i advise you back up just in case.)
step two-
download itunes 10.7 from apple. i used this link Download it from Apple here
(i pulled the link from Aarons website (awesometast.com). you download 10.7 however you want but i used the link above and have had no issues).
although im not sure you need to do this step ( you may be able to download 11.1.5 itunes without 10.7, i did because i was following intructions from http://awesometoast.com/downgrading-to-itunes-10-7-from-itunes-11-on-osx/
step 3-
open Terminal
step 4-
enter in these 3 commands hitting return after each line. 1st line nothing seems to happen, 2nd line nothing seems to happen and 3rd line gives you a warning and requires password to continue. when i did it, my password didnt appear as i entered it and i hit return without looking, so i entered it in again, although im not sure i had to the 2nd time.
killall iTunes
killall "iTunes Helper"
sudo rm -rf /Applications/iTunes.app/
step 5-
drag off and dump the itunes icon (which now has the ? shadow in it) off your dock.
step 6-
install 10.7 itunes you downloaded earlier. (not sure if this part is neccesary. you may be able to just download 11.1.5 but i downloaded 10.7 because i was following Aarons steps.) itunes now works.
step 7-
go to apple and update to 11.1.5 itunes. install it. open it and you have itunes 11.1.5 in perfect working order. assuming you have a decent internet speed for the downloads, the whole process takes very little time.
with those steps above, you can solve itunes just bouncing and not launching issues and also the "thank you for downloading" and nothing downloads issue. enjoy. also i would like to give a shout out to http://awesometoast.com and thank Aaron for the knowledge that enabled me to get itunes back into my life.

Itunes won't open after I agree to lic.

itunes won't open after I agree to lic.

Refer this article to remove SC Info.sidb file
http://support.apple.com/kb/TS2363
If that does not work, Repair your Quicktime. START/ CONTROL PANEL/PROGRAMS n FEATURES/highlight QUICKTIME and click REPAIR

HT204382 mpeg video file won't open in quick time player on my macbook running snow leopard. Works fine in iMac running mountain lion. Any ideas

mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?

HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Old Applications & files won't open in OSX-Tiger/Classic

[post moved from other forum]
I finished my Powerbook's hardware upgrade with success yesterday(with thanks to JPL, Sig, A_Brody and other's great advice). System is now Powerbook G3 400 Firewire with 512mbRam, new 40GB HDD, and OS-X Tiger. However...
I can't seem to get the older Applications or their files to open. I get the error message:
"There is no default application specified to open the document Appleworks 6"
and/or
"Could not be opened because the application that created it could not be found--- could not find a translation extension with appropriate translators"
The upgrade/update procedure included...
===Back-up all files on the old 10GB HDD to an external USB drive.
===Remove old and replace w/new 40GB HDD, also install new 512MB PC-133 RAM module in lower slot.
===booted from old OS CD and ran Hard drive set-up utility with two partitions, one 30GB the other 10GB.
===Install OS 9.0.4 from that original Apple software CD onto the first 30GB partition.
===Onto same partition, ran OS-9 Update 9.1.0, then 9.2.1, then fireware update 4.1.8f5, then Update 9.2.1
===Installed OS-X Tiger onto the first 30GB partition
===Moved all backed-up files from the external USB drive onto the second 10GB partition.
I have tried running the old applications in both OS-X Classic mode and also after changing the "Start-up Disk" to the smaller partition (which should be a clone of how the original Hard drive was set-up i.e. folder structure etc.)
I'm quite surprised that when re-booting to the smaller partiton, that although it looks just like my system prior to upgrading, the apps don't run and the files don't open those older apps that created them. I assumed that the smaller Partition--and booting to it--would be the same as if the original Hard drive was still in the powerbook.
When I get those error messages above, I have followed the "Choose Application" button thru to where I could choose the application. I follow to the "Applications (Mac OS 9" folder to where the actual APPLEWORKS 6 app (for exmaple) is located, but it is greyed out and can't be selected. BTW later I did copy all of the contents of the original "Applications" folder from the backed-up HDD into the OSX "Applications Mac OS 9" folder. Also note, the apps in that folder are listed as KIND "Unix Executable File". The files (in this case AppleWorks files) are also listed as that file KIND.
===In the OSX's System Preferences/System/Classic/Advanced tab, I have tried the REBUILD DESKTOP procedure--with no effected change. I know I read elsewhere in discussions that there was a procedure to re-boot with a certain keyboard held-key combo that allows to re-build desktop upon booting?? I don't remember the keyboard combo. And,not certain how that procedure is different.
===In the change Start-Up disc Utility, I now see four Systems to choose from...
Mac OSX 10.4 on New 30GB HD
Mac OS 9.2.2 on New 30GB HD
Mac OS on Old 10GB HD (that's the smaller partition),
Mac OS 9.2.2 on New 30GB HD
Network Start-up
Both the second and forth choice will boot-up to OS 9.2, but as mentioned the apps won't run and files won't open
I'm guessing the reason the third choice won't boot (it reverts back to OSX Tiger when I try) is because that original System copy is OS 9.0.4 (backed-up prior to running the OS-9.1 and 9.2.1, 9.2.2 updates.). Also note, when in OS 9.2.2 when I go into that Utility... Apple/Control Panels/Startup Disk it doesn't list the old OS on the smaller partition. BTW could I now run/perform the OS-9 updates to bring that System on the smaller HD partition up to OS-9.2.2 with out causing problems (and maybe providing solutions?)
I wonder...
??? Why would I be having to choose which application would open an application---wouldn't an app open on its own (Unix Executable File")
??? When I moved the orig HD back-ups on the external USB drive I noticed a file with some kind of PC icon was being created within the folder. Currently I see that the file is now displayed as FINDER.DAT. Does this file relate to the error that refers to "appropriate translators"? Could the Apple Macintosh files being backed-up onto an external USB drive that may not have been formated as Apple HFS type be causing a problem?
??? Why wouldn't the smaller 10GB partition with the old HDD back-up copy moved to it not function like the original Hard drive? Particularly when I choose to boot to its SYSTEM w/Start-up Disc? BTW when I choose that route, the powerbook just boots to OSX Tiger.
THANKS for any replies, you all have been a great help with the challenges of upgrading...
MSG-PWRBkG3
PS:
Sorry for the long post. But, I have included as much up-front details as possible to assist in your replies. I also want to help others reading this thread later on as to what (correct or incorrect) procedures were followed... to help them see how these in-compatibility scenerios would be similiar to their situations... leading to solutions for all.

Thank you for including as much detail as you did. It makes it much easier to troubleshoot this type of issue. What I'll do is basically follow along with the procedure you used and point out where you (unknowingly) ran into problems.
"Back-up all files on the old 10GB HDD to an external USB drive."
Okay, I'm betting that this external USB drive was formatted as PC-Exchange/Windows format. Since this type of disk format doesn't have native support for the special "Mac" information about files (such as resource forks and HFS metadata like file type and creator codes), when Mac OS writes files to these disks, it needs to use a special method. When you copy the files from OS 9, OS 9 adds special "FINDER.DAT" files and also stores the resource-fork-parts of the original files inside a "RESOURCE.FRK" folder on the disk. My FAQ goes into more detail about this. When, from OS 9, you look at the files you just copied to the PC-formatted disk, and they appear identical to the files on your original 10 GB hard drive, that is in fact a complete illusion. The files as they exist on the PC-formatted disk are very different from what they appear. When you hook it up to your OS 9 Mac, the files appear fine, and you can copy them and have them work just like the original files did. If, on the other hand, you hook this PC-formatted hard drive up to your OS X Mac, it looks at the files in a completely different way. If you copy the files off of this disk from OS X, most of the files won't be usable.
"Remove old and replace w/new 40GB HDD, also install new 512MB PC-133 RAM module in lower slot."
"booted from old OS CD and ran Hard drive set-up utility with two partitions, one 30GB the other 10GB."
"Install OS 9.0.4 from that original Apple software CD onto the first 30GB partition."
"Onto same partition, ran OS-9 Update 9.1.0, then 9.2.1, then fireware update 4.1.8f5, then Update 9.2.1"
"Installed OS-X Tiger onto the first 30GB partition"
"Moved all backed-up files from the external USB drive onto the second 10GB partition."
If you did this from OS X, you will run into problems, whereas if you do this from OS 9, you'll be okay. The reason for this, as I mentioned above, is that OS X doesn't know how to "see" the files in the same way that OS 9 does.
This is what I would do. Make sure you still have the PC-formatted drive with the files you backed up from OS 9. Reboot into one of your versions of OS 9 that works properly. Hook up the external USB drive, and the files on it should appear properly and function properly. Now copy the files over onto your local hard drive and they should work properly as well. The files that you copied over from OS X won't be useful and can be deleted. Then reboot into OS X and you should be all set.
Hope this helps....
Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM Mac OS X (10.4.5)

.psd files won't open

I was using tiger and Photoshop 4 on a PowerPC. I now have a MacBook Air and 10.5. My .psd files won't open as stated in the following message "The document "filename.psd" could not be opened. I have also got the message that the file is corrupted and won't open. I used graphic converter to open the file and it did without issue and after I resaved the file it opens without issue, but not in Preview. It opens in graphics converter.
Is there a fix so that my .psd files will open in Preview?

You can try saving in another format that is compatible with Preview on the old machine. If that doesn't work, you might want to try using other 3rd-party PDF readers such as Adobe reader.
Message was edited by: I love my macbook!!!!

Keynote '08 files won't open after cable replacement

Similar Messages

Maybe you are looking for