KIND_OF_ENTRY field in the table CRMD_PARTNER is not getting populated

Hi Friends,
Iam working in CRM 5.0.
In GUI, when i open an Oppurtunity and in the Sales Team tab, if i change the Partner value, then the entry 'KIND_OF_ENTRY' in the table CRMD_PARTNER is updated as 'C' for that particular line item in the header level. The value 'C' in KIND_OF_ENTRY field says 'Entered Manually'.
But when I do the same operation in PCUI, the value is not getting updated. The KIND_OF_ENTRY field is blank in case of PCUI.
Can anyone please tell me is this a configuration issue, or do I need to manually call the CRM_ORDER_MAINTAIN function module to meet this requirement. Or Is there anyother way to solve this.
Thanks & Regards,
Raju

Hi,
We are facing the same problem. How did you solve it?
Thanks in advance

Similar Messages

ALV Block list. Field name at user command not getting populated

Hi All,
I'm trying to use ALN block list. Field catalog is built using the REUSEALVMERGE FM.
I've put hot spot on some fields. When I'm trying to capture the data when user clicks on the hotspot field the structure that comes in the user_command subroutine is not getting populated with the fieldname. But it is getting populated with the tabname and value is also coming properly.
FORM user_command
          USING
          ucomm    TYPE sy-ucomm
                selfield TYPE kkblo_selfield.
What could be the possible reason?
I appreciate your inputs.

Hi Surya,
         Did you find the solution for this?
Best Regards.

Condition type not getting populated at first line item of Sales order

Hi Experts,
We are creating Sales order through IDOC(Inbound function: IDOC_INPUT_ORDERS) for Document type ZXX then condition type is geeting populated at both line item, i have tried creating the Sales order through IDOC for document type ZYY the condition type is not getting populated in first line item, but for secod line item condition is getting populated.
we also checked pricing procedures related to this document types and we found these pricing types are mentioned in corresponding pricing procedures.
Let us know there are any other possible ways to find the same
please help.
Thanks!

Hi Rajani,
check the user exit in the FM..IDOC_INPUT_ORDERS
check if any filters kept for condition type field..
check the belwo user eixuts
ORDCHG I VEDB0001 Sales Ord. Change
ORDERS I VEDA0001 Sales Orders..
Regards,
Prabhudas

Baseline date not getting populated from SRM invoices posted to ECC 6.0

Hi,
We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
Thanks
Aravind
Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AM

Hello,
Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
Hope the above infor.are helps for you!
Best Regards,
Gladys xing

Sales data not getting populated for Material master by LSMW.

Hi,
When I am trying to create material manual for sales view material is getting created and the table MVKE(Sales Data for Material) is getting populated with the sales data. But when i Am trying with LSMW METHOD
Object          :     0020
Method          :     0000
Program Name    :     RMDATIND
Program Type    :     D(Direct Input)
    materials are geeting created but the sales data is not getting populated in the table MVKE(Sales Data for Material) and LSMW program also not showing any error.
Can any one tell me what is teh problem here.
Thanks,
Naren.

Hi,
along with VKORG, VTWEG in <b>BMM00</b> are you mapping the below one's also.
BMM00-XEIV1 = 'X'. "sales 1 view
BMM00-XEIV2 = 'X'. "sales 2 view
this will enable the sales(1/2) view.
Check it once..
Regards
vijay

Data not getting populated in Payslip in ESS Portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Hello,
Do one thing for executing the PZ11_PDF trsaction please follow following steps.
1. Once you log in SAP system with same User - Id which you r using on Portal .
Once log in PUT "/N" in the command box . Then put the trasaction "PZ11_PDF" and execute it will
Call the salary statement .
Or
Once you log in SAP system put the trasction "/nsbwp" then give the trasaction "PZ11_PDF" it will
call the salary statement ..
give inputs once you done
.....The issue with Authorisations please check it ...
Add this object in ESS role "S_SERVICE' ...
and this object in ESS role "P_PERNR" ---infotype 0008
Edited by: Vivek D Jadhav on Jun 15, 2009 11:49 AM

Data not getting populated in ESS Payslip in portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Asha,
Maintain Feature EDPDF which determines the SMARTFORM being used to make the payslip available for employees. This is more of a HR related issue and I believe if you post this in the ESS or HR Forum you would be able to resolve this issue.
Good Luck!
Sandeep Tudumu

SRM 7.0 extended : Account assignment is not getting populated by default

Hi All,
We have created Purchase order using shopping cart in SRM 7.0 extended classic scenario. Assuming that the delivery from the vendor is done. In Goods receipt The Account assignment is not getting populated by default. If we did the same manually it is picking up the details by default.
please let me know what we are missing.
Regards,
Lakshmi Narayana

Hi Laksmi
Account info must defaulted if it is not direct procurement.
check or you ordering as direct or not? if you have SC has Acc data and it must be copied into PO by default...
Muthu

Initialization parameters not getting populated correctly during DBCA

This problem is observed on Oracle 10.2.0.1 Linux x86 and RedHat Enterprise Linux 4 ES Update 5.
I tried to use DBCA template file to create an Oracle database (see below for the template file content). The DB creation was successful, but the initialization parameters did not get populated into /oracle/u01/app/oracle/admin/ora10g/pfile/init.ora the way I would expect.
ora10g.dbt template - file content
========================
<DatabaseTemplate name="ora10g" description="" version="10.2.0.0.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="true"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
<option name="HTMLDB" value="false"/>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="audit_file_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/adump"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/bdump"/>
<initParam name="compatible" value="10.2.0.1.0"/>
<initParam name="control_files" value="(“/u01/oradata/{DB_UNIQUE_NAME}/control01.ctl“, “/u02/oradata/{DB_UNIQUE_NAME}/control02.ctl“, “/u03/oradata/{DB_UNIQUE_NAME}/control03.ctl“)"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/cdump"/>
<initParam name="cursor_sharing" value="EXACT"/>
<initParam name="db_block_size" value="16384"/>
<initParam name="db_cache_size" value="1" unit="GB"/>
<initParam name="db_domain" value=""/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="ora10g"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="0" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="log_buffer" value="64000000"/>
<initParam name="open_cursors" value="300"/>
<initParam name="pga_aggregate_target" value="1" unit="GB"/>
<initParam name="processes" value="300"/>
<initParam name="recyclebin" value="off"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="sessions" value="335"/>
<initParam name="sga_target" value="1600" unit="MB"/>
<initParam name="shared_pool_size" value="128" unit="MB"/>
<initParam name="sort_area_size" value="4194304"/>
<initParam name="transactions" value="610"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_retention" value="10800"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>80</percentageMemTOSGA>
<customSGA>false</customSGA>
<characterSet>WE8ISO8859P1</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/pfile/init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="false">{ORACLE_HOME}/dbs/spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="control01.ctl" filepath="/u01/oradata/{DB_UNIQUE_NAME}/"/>
<image name="control02.ctl" filepath="/u02/oradata/{DB_UNIQUE_NAME}/"/>
<image name="control03.ctl" filepath="/u03/oradata/{DB_UNIQUE_NAME}/"/>
</ControlfileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/sysaux01.dbf">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">500</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/system01.dbf">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">500</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/temp01.dbf">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">100</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/undotbs01.dbf">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">100</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/sysaux01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>false</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/system01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>2</allocation>
<uniAllocSize unit="KB">1024</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>false</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/temp01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/undotbs01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">1048576</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="redo01.log" filepath="/u01/oradata/{DB_UNIQUE_NAME}/"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">1048576</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="redo02.log" filepath="/u02/oradata/{DB_UNIQUE_NAME}/"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">1048576</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="redo03.log" filepath="/u03/oradata/{DB_UNIQUE_NAME}/"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
Right after DB creation using DBCA, I would expect to see the following initialization paramaters populated in /oracle/u01/app/oracle/admin/ora10g/pfile/init.ora file that match the values I specified in the template file, but it appears that some initialization parameters are either not populated or incorrectly populated.
db_cache_size=1g
(this parameter entry is missing, not getting popultated at all)
sga_target=1600m
(sga_target populated with 1211105280)
pga_aggregate_target=1g
(pga_aggregate_target populated with 403701760)
shared_pool_size=128m
(this parameter entry is missing, not getting popultated at all)
large_pool_size=0
(this parameter entry is missing, not getting popultated at all)
java_pool_size=0
(this parameter entry is missing, not getting popultated at all)
log_buffer=64000000
(this parameter is correctly populated)
transactions=610
(this parameter is correctly populated)
recyclebin=OFF
(this parameter entry is missing, not getting popultated at all)
cursor_sharing=EXACT
(this parameter is correctly populated)
Does anyone know why some initialization parameters did not get populated or incorrectly populated into init.ora?
Thanks in advance.
Ken

Likely dbca currently uses the spfile to store the parameters, as you should do too.
Apart from that the pfile Oracle uses is located in $ORACLE_HOME/dbs/init<sid>.ora
It is possible this file is soft-linked to the file you mention.
If it isn't the file you mention is not being used at all.
Hth
Sybrand Bakker
Senior Oracle DBA

Forecasting information not getting populated

Hi
I maintained the forecasting view for all my raw materials and finished goods.
most of my FERTS are MTO .
I am using strategy 82 or 86 or 50 for them.
but the consumption information is not getting populated for these materials.
Its getting populated for all the raw materials and and packs.
its not getting populated for FERTS .

Deepu,
Check the movement type which is being used to perform the PGI. This movement type must be defined for updating the consumption values, please check this in OMJJ.
Regards,
Prasobh

Query: Customer Exit variable not getting populated

Hello Experts, I created a Customer Exit variable (ZPREV_MTH_OPS) in the query designer (7.0). I also put the necessary code in the function module "Z_BWFI_QUERY_CELL_MANIPULTN", but the query variable is not getting populated when I run the query using RSRT. The boxes for "Variable is ready for input" and "variable is without context" boxes when defining the variable.
This is my code in the exit:
case i_vnam.
    when 'ZPREV_MTH_OPS'.
     break-point.
      if i_step = 2.
        clear l_s_range.
        if sy-datum+4(2) = '01'.
          wa_prev_month = '12'.
          wa_prev_year = sy-datum+0(4).
          wa_prev_year = wa_prev_year - 1.
        else.
          wa_prev_month = sy-datum+4(2) - 1.
          wa_prev_year = sy-datum+0(4).
        endif.
        concatenate wa_prev_year wa_prev_month '01' into wa_datum.
        call function 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
          exporting
            day_in            = wa_datum
          importing
            last_day_of_month = wa_datum2.
        concatenate wa_prev_year wa_prev_month '01' into wa_datum.
*        l_s_range-low = wa_datum.
*        l_s_range-sign = 'I'.
*        l_s_range-opt = 'BT'.
*        l_s_range-high = wa_datum2.
*        l_s_range-sign = 'I'.
*        append l_s_range to e_t_range.
        l_s_range-low = '20080901'.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'BT'.
        l_s_range-high = '20080930'.
        l_s_range-sign = 'I'.
        append l_s_range to e_t_range.
      endif.
endcase.
I also put a break point the exit, but it's not coming to the breakpoint.
Any suggestions?
Thanks.

Josh, the link you provided reminded me to include the code in the include ZXRSRU01 also, instead of just changing the function module. Thanks for your help and all those who tried to help me.
case i_vnam.
   when 'ZREL12MTH' or 'ZPREV_MTH_OPS'.
     call function 'Z_BWFI_QUERY_CELL_MANIPULTN'
       EXPORTING
         i_vnam        = i_vnam
         i_vartyp      = i_vartyp
         i_iobjnm      = i_iobjnm
         i_s_cob_pro   = i_s_cob_pro
         i_s_rkb1d     = i_s_rkb1d
         i_periv       = i_periv
         i_t_var_range = i_t_var_range
         i_step        = i_step
       IMPORTING
         e_t_range     = e_t_range
         e_meeht       = e_meeht
         e_mefac       = e_mefac
         e_waers       = e_waers
         e_whfac       = e_whfac
       CHANGING
         c_s_customer = c_s_customer.
endcase.

Field in the table but not in the datasource

I have a datasource 0co_pc_act_05 based on mbew table . I need a field from that table , which is not present in the datasource , what should i do .?
How can i get the field from the table into the datasource?
Thanks

hi Mike,
try following steps
- in r/3 transaction rsa6 choose the datasource, click enhance strucutre, then append structure, system will propose z..., confirm it, in the next screen, type in the field name e.g abcd
- activate the append structure
- back to rsa6 choose the datasource, click edit, remove mark in column 'hidden' field for that field, save the datasource.
- in this case you no need to do user exit since that field exist in the origin table where the data extracted.
- recheck with rsa3
later in bw side
- create new infoobject, then right click the datasource and 'replicate datasource', change transfer rules, move the new field from right side to left (to be included in transfer structure), then assign the field by type in the new created infoobject name, activate the transfer rules. include also this new object in infocube etc.
hope this helps.

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED. I don't know if an option of configuration adjustment exists in Dreamweaver that corrects the problem. It is Dreamweaver CS4 - Version 10.0 build 4117.

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

Fields missing in SM30 after adding new fields to the table

Hi ABAPers,
I added a new field & marked another field as primary key in the table. Then I generated the table maintenance view for the table in SE55 and adjusted Database utility SE14.
When i saw the table in SM30. The number of fields in the overview screen of SM30 shows less field then existing in table. i.e in my table i have 10 fields(3 primary). in SM30 it shows only 5 fields(3 primary + 2 normal fields)
In SE51, the overview screen of the table show less fields in the field list..
I want all the fields in the Table maintenance overview screen. Please suggest me a way forward friends..
Note: the system is 4.0B.
Thanks...Suresh Kumar

Hi
You have to re-generate your dialog for SM30 by table maitenance generator.
- From Se11 go to table maitenance generator
- Choose update icon
- Set flags for NEW FIELD
- Go to expert
- Set flag to re-generate dynpro
Message was edited by: max bianchi

Need to validate a existing field in the table maitainence Generator events

Hi EXPERTS,
There is one Z-table and for that TMG also there. There is custom transaction for sm30. Now I need to validate one field BNAME for new entries I have created event -05(creating new entry) it is validating correctly. But now another requirement is if user also wants to change the existing values for the field BNAME it should also be validated needs to populate error mesg and does not allow to save it. I used event 01(before saving data) 07 ( before correcting the contents of selected field) 18 ( after checking whether data has changed)but not working any of these events. Please suggest me which event is suitable for my requirement. Orelse I need to put the code in the flow logic of the screen under PAI module I think this is not a good practice.
Code:
FORM data_changed.
DATA     : l_bname TYPE xubname.
CONSTANTS: c_mesg      TYPE char16   VALUE 'Invalid SAP User',
             c_error     TYPE char1    VALUE 'E'.
* Validation on BNAME field
IF zps_capex_appr-bname IS NOT INITIAL.
    SELECT SINGLE bname FROM usr01 INTO l_bname
           WHERE bname = zps_capex_appr-bname.
    IF sy-subrc NE 0.
      MESSAGE c_mesg TYPE c_error.
    ENDIF.
ENDIF.
ENDFORM.                              "DATA_CHANGED
Please suggest me how to proceed.
<Added code tags>
<< Priority normalized >>
Awaiting for your replyu2026
Thanks in Advance.. 
Edited by: Rob Burbank on Mar 2, 2012 9:23 AM

Hello Sreekanth,
How are you populateing the field zps_capex_appr-bname ? I'm pretty much sure that this is not getting populated at runtime.(put a break-point & check)
In order to access the data in the TMG [Event01|http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9f0ba9d111d1a5690000e82deaaa/content.htm], we have to use the TMG system tables - TOTAL & EXTRACT.
If your validation of BNAME fails, remember to:
1. Set SY-SUBRC to a non-zero value,
2. Set the flag VIM_ABORT_SAVING to 'X'.
BR,
Suhas

KIND_OF_ENTRY field in the table CRMD_PARTNER is not getting populated

Similar Messages

Maybe you are looking for