KM Search iView for User Search

Hello,
I am trying to create a new iView for User Search based on the KM Search iView Template. However, in the properties of the iView (Property Editor) there is no option to assign the ume index (contains users) to the iView. I previewed the iView, entered just a "normal" search term assuming that the iView would at least search for something, but the following error message occured. "TemplateError during search occurred - com.sapportals.wcm.WcmException: Index is corrupted, rollback required;index=ume,location=iwdf0003:39103 (Errorcode 2008)"
Does anyone know how to solve this problem?
Thanks a lot,
Katharina

Hi Katharina,
now I understand. The problem is that you can't just use the KM search iView, you need to use a special iView based on com.sap.netweaver.coll.WhoIsWho or com.sap.netweaver.coll.WhoIsWhoNarrow. The configuration to be done (if you named the index for example not "ume") is described <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/05/a62c42de59da2ce10000000a1550b0/content.htm">here</a>.
You can also find this iView in the com.sap.netweaver.coll.demo.CollaborationDemoRole role by navigating to Collaboration Demo -> People-Centric -> Who's Who.
The steps on how to create the ume index are described <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/21/ac21410bc3ef23e10000000a155106/content.htm">here</a>.
Hope this helps,
Robert

Similar Messages

Search help for user field for WBS element

Hi,
how can I add a search help to one of the user fields for WBS elements without modification? Is there an exit which I can use? I want to have a search help for field PRPS-USR02.
Thanks for your help.

Hi
Create an elementary serach help using the Table USR01 or USR03
see the steps
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Regards
Anji

IW31- How to add Search help for User specific fields in IW31 transaction.

Hi Experts,
I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction.
Is there any user exit for this requirement.
Please reply, it will be very helpful for me.
Regards,
B. V. Rao

Bala,
See the following user-exits:
IWO10015: F4 Help for user fields on operation
IWO10016: Customer enhancement to check operation user fields
PeteA
[www.pjas.com]

What character splits search terms (for different search result tabs), searching from the search box.

When we type in a search term, in the search box, the results can be shown in a tab. But how can you split search terms while entering them all at once, each search term providing results in a new tab.
"Search Term|Search Term Two", using |;\ etc only sends the term in entirety beyond. What does this box handle and how to make it open two tabs when given two separated search terms.
So what is this special character or setting?
Thank You

Thank u so Bruce , I finally found an answer to my question.
The solution u provided looks complete except that i am confused by the meaning of strField , may i didnt provide more details in my post .
The strField var i provided earlier was not meant to be placed in my code , the correct one is shown below .However , the strField means according to me is the field against which the search operation should take place based on the ( search Term )
the user provided .
Here is the code after applying the solution u suggested :
'Information collected from the user
strWhereToSearch = IIf(.framSearchIn.Value = 1, "[quknotSubject]", "[quknotBody] ")
strCondition = strWhereToSearch & " Like '* " & strTextSearch & " *' OR " & _
strWhereToSearch & " Like '" & strTextSearch & " *' OR " & _
strWhereToSearch & "Like '* " & strTextSearch & "'"
'Fill result search Recordset
strSql = " Select * from qryExtraTool_QuickNoteSubCatMainCat   "
strSql = strSql & " WHERE   " & strCondition & " ORDER BY quknotDate"
'Control Source for the text box to display matches. ( Highlight the search word )
txtQuickNoteBody = SearchHilight(strWhereToSearch, strTextSearch)
Tell me if my implementation to your code is right ?
Thank u again Bruce ...

Difference Betw Search iView and KM Search iView

Dear SDN,
I want to know the basic diff betw the Seach iView and KM Search iView.
In EP 7.0..there are two options..one for Search iView and other for KM search iview.
I am confused..Pls help asap.
Thanks,
Nikesh Shah

Hello Nikesh,
Here are some links which contains the details of KM search iview and Search iview from diffferent sources.
I guess these links will help you a lot.
Creating Search iViews
http://help.sap.com/saphelp_mdmgds55/helpdata/EN/45/c9cfa2cdaa4ebbe10000000a11466f/content.htm
KM Search iView
http://help.sap.com/saphelp_nw04s/helpdata/en/ad/e3ce0fd4f011d5994400508b6b8b11/content.htm
Creating an Index
http://help.sap.com/saphelp_nw2004s/helpdata/en/73/66c090acf611d5993700508b6b8b11/content.htm
Please feel free to contact me for more details .
Warm regards,
Rakesh Kumar Verma

How good Endeca Search is for ECM (Search on documents) products

HI all,
I am evaluating Endeca Search (Guided Search) as a search engine for Enterprise content management's .
Basic objectives are -
1) Search engine should be able to search documents with high relevancy.
2) When user sees the search results , he /she should be able to navigate/open the original document.
To be precise, users need is to find and open documents.
So I expect different points of view for the above use case. If anybody implemented similar use case, then please make some noise .
Regards,
Hoque

So I have been involved in half a dozen enterprise search projects using Endeca. Things to consider:
1. Ingesting the documents. (velocity, variety, volume and frequency of change, location of files ). Endeca Content Acquisition Server comes with a variety of connectors for various industry standard document repositories, web and file systems crawls. Document converter for various document types is included.
2. ACL and profiles for users. It is easy enough to create a link to the doc repository and pass credentials of the user. This has been fairly easy to achieve in the past.
3. Search relevancy ( Endeca has a versatile relevancy ranking technology)
4. Apply facets to documents so that they can be refined. Various ways to achieve this.
5 I18N Are the documents one language, multi language.
Check your price points for doing this , there are some systems out there that index everything and provide a basic text search, Endeca can combine structured and unstructured records with faceted navigation but it needs effort and work to do this.
hth
Terry

Cannot select search suggestions for Google search

Firefox 4- Cannot select any item to search in Google from search history drop dwon box, must enter new search every time

Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Search Help for User

Hello all,
I am creating a search help to find users based on User ID and name. This is the scenario:
1) when the user clicks on the search help, he should be able to view a list of all users. Only 2 fields should be displayed in this list viz. User ID and User name.
2) I have managed to find that user id is placed in table USR01-bname. I am unable to link it to user name.
Please help.
Thanks in advance,
Mz

Hi:
You can create your own search help, have a look with a link
[Link|http://help.sap.com/saphelp_47x200/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm]
Regards
Shashi

How do I use "Search Query" for nontrivial searches?

After a few years in the community, this is my _first_ question to the boards ;-)
In speaking with a colleague today, I learned about an NI forum feature that would be useful for me. When I tried to configure it, I then learned that I didn't know how to use it. When I tried to learn how to use it, I further learned that it wasn't fully documented. So, I'd like some clarification :-)
The feature in question is "Search Query" which will send you an email when a forum search matches your query. What I don't know is:
What are the rules (syntax) for search queries? For example, I would like to search for single words, all the words that I specify, as well as exact phrases. How do I differentiate between multiword queries and exact phrase queries?
Is it possible to have more than one Search Query?
If so, how do you delineate them? Would I use commas, a new line, something else?
I'm asking because the available (and discoverable) documentation doesn't mention what to do when you want more than one Search Query. The help text on the subscription page [1] makes me think that only one query is possible, and says a Search Query:
Sends you mail every time a message matching your query is submitted. Search queries take up to 15 minutes to take effect. Saving a blank query will disable this feature and will stop any mail from being sent.
The other place I tried was the NI Forum FAQ [2], which makes me think that more than one query is possible:
If you add a board, thread, message, or search term to your subscriptions, the system will send you an e-mail every time someone posts to the board, or replies to the message or thread. If you prefer not to receive an e-mail for your subscriptions, you can subscribe to the RSS feed of a board, thread, user, or search term.
The FAQ goes on about what to do with board, thread, and message subscriptions, but doesn't say anything more about search subscriptions.
The last place I looked was on the search results page itself. In the blue header that precedes the results, there's a link on the far left that says "Search Options" with a single option that says "Subscribe to this search's RSS Feed". While I could subscribe and use an RSS reader, I really would prefer email. I suppose if only one Search Query is possible, then this will be my workaround.
As a comment, why does the Search Options menu not also have a "Subscribe to this search" option, which would add another entry in the Search Query box? This is a noticeably different interface than the Thread Options menu.
[1] Subscriptions & Bookmarks
http://forums.ni.com/ni/user_subscriptions
[2] Frequently Asked Questions
http://forums.ni.com/ni/help_faq
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)
Solved!
Go to Solution.

Hi Joe,
Thanks for all of the questions and congrats on posting your first question!
Unfortunately I think all of your questions come from the valid assumption that the search query functionality is more robust than it actually is. The search query functionality really only serves a single purpose and that is to email you when your phrase has been posted to the forums. For me, I use it to email me when my name is mentioned in the forums. It serves this purpose well since I have it set up to work off just a single search term. However I find that multiple word phrases are combined with an OR which is not as useful. The search query does not adhere to any common search syntax that you would expect (I believe we are the only community that uses this feature so it has not been improved upon).
The best way to set up both multiple word queries and multiple different queries is to use the RSS feed as you mentioned. This way you can tailor your search very specifically using different advanced search options and subscribe to them all in one feed reader without constantly getting emails. The search query emails do not adhere to the digest subscription settings. I find that the RSS feeds work very well for searches and I am fond of using them, but I do use an RSS Reader for many things so it is not out of my normal workflow.
Thank you for reading the Forum FAQ. I've done some work to improve it but I think it has a long way to go and it's good to know that people read it
Regards,
Laura
Web Support & Operations
National Instruments

Advanced search optioncolumn for google search lost in Firefox 10

On upgrading to Firefox 10 the advanced google search option column which provides options to restrict google search results by date has disappeared in Firefox 10. Now I have to use the old approach of clicking advanced search, then date and then the time period I'm interested in. This doesn't happen in IE9 or Chrome.

I am not entirely certain what you are seeing, but it is possibly more likely it is an option you have changed with Google yourself. Possibly you need to ensure cookies are enabled for the google site.
Are you seeing this problem when you go to a Google Website by using a bookmark or entering an address into the location bar, or are you having a problem with the searchbar ?
Maybe if you attach a screenshot of the IE9 and Firefox Google search screens it will help others understand what you are seeing.

Custom search criteria for employee search in CRM Web UI

Hi,
I currently have some functionality in an implementation of enhancement spot BADI_CRM_BUPA_IL_SEARCH_EXT so that I can influence what search results are returned in component BP_HEAD_SEARCH.
It seems that this BADI is not called when looking for employees in BP_EMPL_SEARCH component.
Does anyone know where i can implement similar functionality as i have for the corporate account / individual account search, is there another BADI for this?
Cheers
Matt.

Hi Matt,
If a BADI is not getting called but you need it to be called then you can also call it in your custome code on component method.
Regards,
Suchita

How do I get search typing for Contacts Search function on Iphone with 2.0?

An ad for 2.0 iphone update says:
"Contacts Search
Have a lot of names in your address book? Type a name into the new Contacts search field and iPhone shows you matching names."
Now I have 2.0 and can't find a way to get into the Contacts search field. Anyone having better luck with that? Please help.

Did you just install 2.0? Is your contact list showing you your first entry when you open it? Try scrolling up to the top of your list.

How to make search string for the searched text containing single quote?

Hi all,
When trying to search some Contacts from Eloqua, I have to make a search string which would list out some specified EmailAddress.
Unfortunately, I meet several emails who have single quote in their spelling.
I got 'invalid format' error when both using them directly and making single quote twice.
Any suggestions?
Thanks,
Biao

When testing, the following examples:
GET /Api/rest/1.0/data/contacts?search=emailAddress=bm'[email protected]
GET /Api/rest/1.0/data/contacts?search='emailAddress=bm'[email protected]'
GET /Api/rest/1.0/data/contacts?search=emailAddress="bm'[email protected]"
GET /Api/rest/1.0/data/contacts?search="emailAddress=bm'[email protected]"
All return:
"elements":
    "type":"Contact",
    "id":"1421620",
    "createdAt":"1419611518",
    "depth":"minimal",
    "name":"bm'[email protected]",
    "updatedAt":"1419611519",
    "emailAddress":"bm'[email protected]"
"page":1,
"pageSize":1000,
"total":1
Likewise, the following returns nothing:
GET /Api/rest/1.0/data/contacts?search=emailAddress='bm'[email protected]'
Hopefully this helps,
Bojan

How to empty App search box for next search

How can I empty the search box in App Store to begin a new search?

Tap the X on the right side of the search box - the box that you type the app name or description in.

"Search for User" display no user

Hi,
I'm testing the Early access release of the SVDI.
I discovered a problem connecting to our OpenLDAP-Directory. The directory is configured with correct values for host, port, Base DN, User DN and password. The setup wizard finished without errors. But the search function on the "Users -> Users and Groups" tab returns no users.
This might be an issue with the structure of our openldap-tree, so I digg a little deeper. :-)
Our ldap tree looks like this:
/ ou=department,o=organization,c=de
|--- ou=Users
|--- ou=Groups
|--- ou=Computers
When I look at the logfiles of openldap, I recognize a ldap query with
'filter=&(&(|(?objectClass=user)(objectClass=person)(objectClass=inetOrgPerson)(objectClass=organizationalPerson))(!(?objectClass=computer)))(|(cn=*demo*)(uid=*demo*)(mail=*demo*)))'
This query doesn't return any entries.
While playing around with ldapserach I removed the '(!(?objectClass=computer))' part and the query works.
Removing this part from /etc/cacao/instances/default/modules/com.sun.vda.Service_Module.xml and restarting cacao makes me happy. :-)
What are the requirements for a supported ldap structure? I know that only active directory and Sun directory server are supported, but changing the directory service is not a 'near-time' option for me.
Currently we are using SUN VDI 2.0 and all (my) missing features are in 3.0. :-)
Thanks,
Thomas

Hi Thomas,
you did the right thing.
OpenLDAP doesn't seem to support LDAP queries about object classes it doesn't know.
This is impossible to have generic LDAP queries that are supported by every type of LDAP directory, and we know it is out of the question for customers to change their LDAP schema. That's why we made the LDAP filters and LDAP attributes, used by VDI, editable, so that customers can customize them to match their LDAP directory requirements.
The default filters would work OK for quick demos with Active Directory and Sun DS, but for production deployment, it would still be recommended to adapt the filter to match most closely the schema of the directory and to put less strain on the LDAP directory. This will be documented with our official release.
In Active Directory, computer objects have objectclass=user and objectclass=computer, so the (!(objectclass=computer)) part is there to avoid that computer objects are returned in a search for users and groups. But it is useless for the other type of directories that don't have such a specificity.
FYI, here is how VDI performs the search for users and groups:
The filter used by the web-GUI to search for users is: (&<ldap.user.object.filter><ldap.user.search.filter>)) and then the $SEARCH_STRING placeholder is replaced by \*criteria\* where criteria is the string you type in the web-GUI search field.
Same applies for groups, using the group filters.
We search first for users and then for groups.
Regards,
Katell

KM Search iView for User Search

Similar Messages

Maybe you are looking for