Know bug in livecycle

I just realized that the known bug in live cycle is creating unnecessary lines of code to my form. I don't have the ability to update to the most recent live cycle. Is there any way to fix it without? Has anyone created a macro or something to remove all the extra lines? So far I have deleted a few hundred thousand occurrences of <?templateDesigner StyleID aped3?> and still going. Also afraid I am going to delete something I shouldn't.

Can you answer another outstanding question? I have this code and it works but it is not calculating over 24hr. I then tried the second code from a post you referred me to but then the formatting was off. I need it to display in HHMMSS and it was displaying in decimal minutes. I can't get both to work together. I need to calculate time and it might be over 24hrs. Do I have to incorporate the date field? Right now I have them separate and would prefer to keep that way. I can send the form if it would be easier. Thanks!!!
if (HasValue(startsamplingtime) and HasValue(endsamplingtime)) then
   var millisecondsPerMinute = 1000 * 60;
   var millisecondsPerHour = millisecondsPerMinute * 60;
   var interval = Time2Num(endsamplingtime.formattedValue, "HH:MM:SS") - Time2Num(startsamplingtime.formattedValue, "HH:MM:SS");
      // Calculate the hours, minutes, and seconds.
   var hours = Floor(interval / millisecondsPerHour );
   interval = interval - (hours * millisecondsPerHour );
   var minutes = Floor(interval / millisecondsPerMinute );
   interval = interval - (minutes * millisecondsPerMinute );
   var seconds = Floor(interval / 1000 );
    Concat( Format("Z9", hours), ":", Format("99",minutes), ":", Format("99", seconds))
endif
if (HasValue(startsamplingtime) and HasValue(endsamplingtime)) then
calcsoaktime = Abs(Time2Num(endsamplingtime.formattedValue, "HH:MM:SS") - Time2Num(startsamplingtime.formattedValue, "HH:MM:SS"))/(60*60*1000);
else calcsoaktime = 24 - Abs(Time2Num(endsamplingtime.formattedValue, "HH:MM:SS") - Time2Num(startsamplingtime.formattedValue, "HH:MM:SS"))/(60*60*1000);
endif

Similar Messages

Is this a know bug with the Mail server?

This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.
The message fails to render correctly in their Web Client but also in Mail.app when it's accessed over IMAP4

steffi wrote:
This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)I can't comment on what Apple may or may not be using ;)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.The email client generating the message is broken and Messaging Server is 'fixing' the email by truncating the line to the maximum line-length as per the standards.
Refer to "2.1.1. Line Length Limits" in http://www.faqs.org/rfcs/rfc2822.html
Regards,
Shane.

Hitting the know bug CSCso59571 in CSM 3.3

Hi,
I am hitting the known bug CSCso59571 in CSM 3.3 and when I try to resolve the bug by entering the following command
pdreg -r Apache -e "NMSROOT\MDC\Apache\Apache.exe" -f "-d NMSROOT\MDC\Apache -D SSL" -d TomcatMonitor
It says path NOT found, I tried entering "C:\Progra~1\CSCOpx", but still it doesn't work.
Can I get any help on this ?

I assume you first entered the pdreg -u command to unregister Apache:
pdreg -u Apache
After doing that, the command you want to run (assuming CSM is installed into C:\PROGRA~1\CSCOpx) is:
pdreg -r Apache -e "C:\PROGRA~1\CSCOpx\MDC\Apache\Apache.exe" -f "-d C:\PROGRA~1\CSCOpx\MDC\Apache -D SSL" -d TomcatMonitor
Note: if CSM is installed in another directory, you must use the path to its installation location instead of C:\PROGRA~1\CSCOpx.

IMessage notification alert tones are not working on my iPad ios 8. Is this a know bug?

my iMessage settings are exactly the same on my iPad air as on my iPhone five, but the alert tones do not sound off when I get an iMessage. Is this a known bug with or without a fix? Is there a setting that is different on the iPad then on the iPhone that I am just overlooking?

Hi AppleUser543210,
If you are having issues with your iPad's notification alert sounds not functioning, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPad -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPad as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

E72 knows bugs to be fixed

Reporting found bugs of current E72 firmware:
1) Long press of 'phonebook' button doesn't trigger creating new contact.
2) Sometimes space button stops working. When I press it backlight turns on, but is just doesn't work while creating SMS or in any other application. Rebooting fixes this problem.
3) After installing some applications, when I open menu, my E72 shows that every single application 'is running'. I mean in the right top corner of each application's icon there is a symbol which indicates, that this application is currently opened.
4) Charging problem. I use E72 for 3 weeks and 2 times there was a charging problem - charging took over 6 hours. And I didn't use phone during charging at all. This problem occured twice while charging using different wall outlet.
Dear Nokia firmware developing team, please fix this issues so we can enjoy your product) Thank you.
If u have noticed any other bugs fell free to report them in this topic)

*Calculator does not accept many keys when I change the language to Arabic for example
*email Client has a lot of bugs (( can't get in to the Other- option to setup Gmail cuz I can't by the normal way))
and its soo slow to deal with
* spacebar not working some time's I have to restart the phone
* can't sync all the emails (old emails) older then 3 week's
*ovi email account asking for password even that I save it from the beginning.

LiveCycle 8.1 on Vista: dropdown list box doesn't show all values

On Vista Business O/S, in LiveCycle 8.1, I am using a dropdown list for 254 items, not dynamically loaded (all values are declared in the definition of the object). When the form runs, the dropdown list appears. I can scroll through the list. However, the scroll stops short, never showing the last few items on the list. Is there some limit I have exceeded or is there some know bug I have encountered or is there some other action I need to take so I can choose any item from the dropdown list? Dropdown list box is defined as user-entered - optional, default <none>. 254 text items, longest item is 19 characters, average item is 10 characters long. Thanks in advance for any help, hints, or tips you provide. Dr. Dave Dyer

Dear Friends....
it seems to be a bug of the SQL Server Data Tools, (SQL Server 2012 SP2)... I did the deploy of my Dashboard, (and details Reports), to my Test Reporting Services Server.. and everything works as expected....
Cheers, Luis

Bug in Open/Create/Replace File

I found this problem in LabVIEW 2009. The boolean indicator doesn't seem to work properly in the first snippet. It returns TRUE even with a valid path. With some trial and error I found a workaround that will make it work properly for now. I just wire an Error Out after the Open/Create/Replace File (second snippet). Is this a bug?? Am I doing something wrong??
I've got a lot of code that uses this to test to check for existing files and then wire the output to a case statement. I also know there is a Check if File/Folder Exists.vi available. I would hate to spend a lot of time changing all my code if this is a known bug and it will be fixed in the next update. If it is not a know bug, where can I submit this??
Solved!
Go to Solution.

Its not a bug. You have race condition between indicator and close ref.
Use it in this way:
Andrey.

BUG : Compressor 3.5 crashing when adding files?

Fcs 2 worked just fine under tiger.
Now with leo, fcs3 and compressor 3.5 it is impossible to convert (1080p prores/hq) a bigger batch of materiel without compressor crashing.
You can try to add about 45 files (e5markII) but anything over that,the compressor crashes.
Previous version was fine and dandy.
Is this a know bug..sorry... Feature of the 3.5 or what?
Any workarounds?
Message was edited by: Macinposh

I would like to know the answer to this as well.
Having same issue w/ 5DMKII files.
First on a Macbook Pro running FC7 and now on my 8-core power mac.
Trying to throw in about 100 clips into compressor for changing to ProRes, crashes program.
20 or 30 clips works fine...

DAQmx Create Virtual Channel AI Temp TC Deg F Bug

Found a bug in DAQmx Create Virtual Channel AI Temp TC Deg F when using a cDaq-9174 with a NI 9213 Analog Inpout module. When I change from Deg C to Deg F I do not get the correct temperature. In Deg C I read ambient temp of 21.84 Deg C Vs. when I select Deg F I read 18.33 Deg F. When I use the DaqMX Assistant the asssitant returns the correct values. Is this a know bug on the 9213 driver? What is the fix?
Solved!
Go to Solution.
Attachments:
Read one AI Temp Channel in C or F.vi ‏13 KB

Thank You - Found it here too

Bugs in the latest ThinkVantage Productivity Center update

Hi,
last Friday I updated the Thinkvantage software on my T61 (WinXP). Beside fixing some problems it brought me new ones.
Foremost, now, as soon as I set my machine into the Lenovo Portreplicator (docking station), it simply goes POWER OFF. No message, no shut down, no nothing, just instant off.
In addition th power management software does not work anymore.
Trying to revert to the old SW version did not work.
Is this a know bug? what can I do?
regards
Florian

Bugs? There's bugs in every bit of software written from day one except possibly the one-liner thing that types out, "Hello world." That's why I wait a week or two after an update comes out, to let the dust settle and also review if it is something I really need. I haven't decided I actually need an iTunes update since iTunes 7.5.
After updating did you repair permissions? Did you verify your hard drive and repair permissions before updating? Many "bugs" aren't really bugs but how a change suddenly makes something that is a budding issue on a computer (and each person has a unique configuration) suddenly come to the surface.

JDBC Statement Bug with OracleLite 4.0.1.2?

I have found what appears to be a bug. Has anyone else encountered this bug. I have the following code:
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("select columnA,columnB from tableA");
while (rs.next())
System.out.println("ColumnA="+rs.getString("ColumnA"));
System.out.println("ColumnB="+rs.getString("ColumnB"));
rs.close();
rs = stmt.executeQuery("select column1, column2,column3 from Table1");
while (rs.next())
System.out.println("Column1="+rs.getString("Column1"));
System.out.println("Column2="+rs.getString("Column2"));
("Column3="+rs.getString("Column3"));
Column 3 is the problem. I get the
following Exception:
System.out.printlnjava.sql.SQLException: >>> [ODBC S1002] invalid column number
After researching it I found that you
cannot reuse a Statement object over and
over again. The reason is that the first
execution of a statement initializes the
number of columns to be returned and each
subsequent statement executed does not
reinitialize the column count. So in the
case above the column count is 2, and I
issue a query with 3 columns using the
same statement object, hence the bug.
I know the work around, just wanted to
know if this is a know bug.Any thoughts.
Mike H.

I've never heard of anything like this either. But I'm not sure I'm properly tracking what you say. You drop a PR file into the source well and it disappears? If you have a Finder window open and you drag it to the Batch window, you actually see the file deleted in the Finder window?
Or do you mean that the PR file doesn't get copied to the well?
Russ

10g BUG? WEB-INF vs. web-inf LINUX

Hello;
I read this was fixed in 10g but it seem to exist still in linux. (Env: RH Linux 7.3, 10g Preview)
Create a New Web App (JSP/STRUTS...).
Create new JSP in /WEB-INF/untitled1.jsp
At this point you can't Compile the project.
The error below is created.
Project:/home/a/jdevhome/mywork/ir2/ViewController/ViewController.jpr
/home/a/jdevhome/mywork/ir2/ViewController/public_html/WEB-INF/untitled1.jsp
Error:/home/a/jdevhome/mywork/ir2/ViewController/public_html/web-inf/untitled1.jsp (No such file or directory)
This also happens when trying to compile Steve Muench BC4JToystore Demo
It looks like web-inf is getting set to lower case somewhere.
I know Linux is not the release for the 10g pre, this is just in case the bug is going to 'pop' up again in the final version
Thanks
A

repost?
Is this a know bug or am I doing something wrong?No, I also experienced the same problem under Linux. With JDev 9i, it works correctly. IMHO it's a 10g bug.
-- Chris.

Simple drag and drop programme. Bug

Hi.
I have a simple drag and drop app for learning English. You hear for eg: banana and have to drag that object to a certain area.
When my little kid plays it she finds bugs - she's my researcher.
It's hard to explain the bug as its hard to get it but kids can easily. You click on the target object and drag it a little, then quickly reclick it but not drag ie: release the mouse as it goes back to its initial position. You move the mouse away and and the object follows mouse even though you are now not dragging and you can't drop it.
I know its hard to imagine this but perhaps this is a know bug for drag and drops.
private function dragHandler(e:MouseEvent)
            e.currentTarget.startDrag();
            xIni = e.currentTarget.x;
            yIni = e.currentTarget.y;
The you have the following which has an event listener for the mouse up event.
private function checkDrag(e:MouseEvent)
            e.currentTarget.stopDrag();
            if (this.currentBubble.hitTestObject(this.dragTarget))
                if (currentBubble && currentBubble == e.currentTarget)
                    currentBubble.visible = false;
                    blnCorrect = true;
                    points = this.points + 10;
                    score.score_txt.text = String(points);
                    correct++;
                    vehiclePosition+=100;
                    TweenLite.to(animation,1,{x:vehiclePosition})
                    trace("CORRECT="+correct);
                    if (correct == 10)
                        endGame();
                        return;
                bubbles.splice(currentIndexArray,1);//you must specify the parameter 1 ie: remove 1
                sndChannel=soundCorrect.play();
                sndChannel.addEventListener(Event.SOUND_COMPLETE, soundCorrectComplete)
            else
                incorrect++;
                sndChannel=soundIncorrect.play();
                sndChannel.addEventListener(Event.SOUND_COMPLETE, soundIncorrectComplete);
                TweenLite.to(e.currentTarget, 1, {x:xIni, y:yIni, ease:Strong.easeOut, onComplete:onFinishTween});

So, the code should be like this:
private function dragHandler(e:MouseEvent):void
     e.currentTarget.startDrag();
     stage.addEventListener(MouseEvent.MOUSE_UP, checkDrag);
     xIni = e.currentTarget.x;
     yIni = e.currentTarget.y;
private function checkDrag(e:MouseEvent):void
     stopDrag();
     stage.removeEventListener(MouseEvent.MOUSE_UP, checkDrag);
Also, i suggest you get into habit to ALWAYS declare datatypes, including what functions return - it is good for memory and performance. In your case, :void should be function return datatype.
In addition, you don't need to stopDrag() on an object - since only a single object can be dragged at a time - just calling stopDrag() is sufficient.

How to buy only "Adobe LiveCycle PDF Generator ES" Service

Hi All,
I am very new to development using ADOBE products.
I have a small requirement, to generate PDF from DOC/DOCX on microsoft and non-microsoft platform using Java language (No MS Office is installed on that machine). So I came to know about Adobe LiveCycle PDF Generator ES.
Now, is there any other solutions available for specific need or above is the one from Adobe?
Can we purchase only this component? How to get the information about pricing of this component - Adobe LiveCycle PDF Generator ES?
Please guide,
Thanks in Advance,
(I am sorry if this is wrong place for this question and if so, please redirect me to the proper forum)

In order to convert DOC/DOCX to PDF, you need to install MS Office and also Acrobat on your LiveCycle Server. But there is no need to install any software on the client. You can only buy and install PDF Generator ES solution component. Once you installed PDF Generator you can invoke it through Java API or Web Services.
For further information:
http://www.adobe.com/products/livecycle/pdfgenerator/
Oguz
http://www.kgc.com.tr

Move to bug? Anyone else?

"move to" doesn't seem to be working properly anymore. I can still drag a message from my inbox to a folder, but right-clicking and choosing "move to" often (but not always!!) doesn't work. Sometimes, it doesn't work the first time, so I right click again and it works the second time. Notably, when I right click this second time, I get a context menu that says "copy to folder_name again" (where folder_name is the one I just tried moving to -- and no, I'm not accidentally choosing copy to since the message is in fact NOT copied to the folder). Other times, I can try it several times with no luck. Can anyone else replicate this issue?
Cheers!
D
Mail 4.3 (1081)
OsX 10.6.4

I guess you have an Intel GPU, this is a know bug in Mesa. (workaround disable-enable composition [Alt+Shift+F12 two times])
https://bugs.kde.org/show_bug.cgi?id=241402
https://bugs.freedesktop.org/show_bug.cgi?id=30220
Last edited by djgera (2010-09-16 16:44:02)

Know bug in livecycle

Similar Messages

Maybe you are looking for