"known hosts store" parameter in SFTP channel

Hi Experts,
I am working on Seeburger SFTP adapter and want the information on its configuration.
My scenario is IDOC to SFTP, I have configured the receiver SFTP channel.
But there is a parameter 'Known hosts store' in it, please let me know what is it and what value needs to be put.
I am using 'Password' as Authentication method.
Your help is highly appreciated.
-Supriya.

Hi Supriya,
This parameter contains the information about the path on PI server where certificates of remote hosts (server where u r actually connecting to for data transfer from PI) have been stored.
You can check for complete path from NWA for Key storage service view paramaters. The value for this entry should start with "USERS\viewname\*".
Please let me know if still there is an issue in understanding about this!
Thanks,
Anoop Garg

Similar Messages

  • Error in Sender SFTP channel[URGENT]

    Hi Experts,
    I am getting the following error in my sender SFTP channel , i am using seeburger module in Sender channel :
    Error type: TASK_ERROR >> Error date: 10/20/11 8:00 AM >> Description: File <O1110200610ZRFEDATA> could not be polled  from directory </GFS/Application_Development/F/Outbound/Data> on host <mxgfudp>; Reason: Error occured while creating callback task. [10/20/11 8:00 AM]
    Error type: COMPONENT_ERROR >> Error date: 10/20/11 8:45 AM >> Description: Could not add or update entry for filename <O1110200508ZFGLOUS_WBS_> [10/20/11 8:45 AM]
    Can some one tell what can be the root cause for this error , these channels were working fine till yesterday.

    This issue occured because of the less space on disk of production server , one the space is created the error got resolved

  • File not found error in SFTP channel

    Hi All,
    We are getting a "file not found error " while using a SFTP sender channel .
    Our Scenario :
    We are using SFTP as the source adapter .Presently we are using  two nodes for load balancing for all the sender channels.
    One of the node's of the  SFTP channel is picking the file , while the other node at the same time is throwing a "File not found error".
    The file is being picked and is placed at the target, but the channels are in error state as one of the nodes is in error state.
    Please let me know, if we did any mistake while configuring the adapter.
    Thanks,
    Yamunan

    Hi,
    Could you please check if you have provided right path in your sender communication channel...to pick the file from...
    Regards,
    Naveen.

  • When I type .ssh root@10.0.02 it says host not recognized I'm unable to get in to known host file can not fix the problem.

    When I open terminal and do sash [email protected] it says warning rsa key not recognized to go to known-hosts file which ican not grt into I have download pico but am not sure how to launch it or what I ave to do.

    sibeen, please stop starting new posts when you are really just continuing the first post.  "Reply" to one of your existing posts when you are really just continuing the same question.  If I have not lost count, you have posted 3 times about this same ssh rsa host key issue, and Linc Davis and I have been trying to keep track of all the details, but with it spread out across multiple new posts, it is difficult.
    I'm guessing as you again forgot to post the actual error (I'm starting to wonder if you are testing how well Linc and I can guess at your problem ).  Anyway, I'm guessing that you managed to delete the $HOME/.ssh/known_hosts file, and now when you try to ssh to 10.0.0.2 it wants to add the remote system's host rsa key into a newly created known_hosts file.
    The authenticity of host '[10.0.0.2]:22([10.0.0.2]:22)' can't be established.
    RSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx.
    Are you sure you want to continue connecting (yes/no)?
    Generally the command ask if you want to do this, yes or no.  You type "yes" and your Mac memorizes the remote system's host rsa key.
    If this is not the warning message you are seeing, then as Linc has requested, please post the exact error (feel free to mask put the actual key or usernames or IP addresses, but keep the words.
    If you are still getting the original error from 3 posts ago, then I would not try editing $HOME/.ssh/known_hosts, and instead just delete the file, and when you get a message like I have posted above, answer it with "yes".
    WIth respect to pico, Mac OS X already has pico installed, so there was  no need to download it from anywhere.  However, most people just use 'nano' which has essentially replaced 'pico' as an easy to use Terminal based text editor.  But like I said, I think you will be happier if you just delete the known_hosts file and get on with your ssh operations.
    Finally, I think in your 2nd post you indicated you tried deleting a file that had a dash in the name (known-hosts) instead of an underscore (known_hosts).  If that was just a typo when you entered your post, and you were really getting you cannot delete a directory, then something is seriously wrong, or you accidentally allowed a space to be inserted between .ssh and known_hosts.  Personally, I'm going with you actually entered a space and the 'rm' command thought you wanted to delete the .ssh directory instead of $HOME/.ssh/known_hosts.  I could be wrong, but using copy and paste to post actual Terminal screen output as well as the command you entered would be very helpful to anyone trying to provide useful information.  In other words, help us help you.

  • CT5760 - virtual-host in parameter-map not used in webauth redirect

    Hi all.
    I'll try posting my issue here before I post a TAC on this:
    Cisco CT5760 wireless controller running IOS-XE version 3.6.0.
    This issue is related to web authentication on an SSID with external web portal. It seems that the statement "virtual-host" in "parameter-map type webauth global" is not used as intended. I'll try to explain:
    When a user connects to an SSID with external web authentication enabled and the user opens a web browser, the user will get redirected to the external web portal for authentication. In this redirect URL we see the parameter "switch_url=http://1.2.3.4/login.html". The IP address 1.2.3.4 is, in this example, our virtual IP. But we have also configured "virtual-host" to be webauth.example.com. And in my opinion the "switch_url" parameter should be "switch_url=http://webauth.example.com/login.html". This is how it works on our old Cisco WiSM1 implementation.
    The reason why this is a problem is that the clients web browser will not accept the certificate installed on "http://1.2.3.4" because it is not issued with that IP address, only the hostname webauth.example.com. I know that it is possible to get certificates issued with an IP address (as long as it's not an RFC1918 IP address), but rumors say that many Certificate Authorities will stop issuing these soon, even with "real IPs". Therefore it is important that the redirect URL gets corrected.
    Does anyone disagree with me that this is a bug?

    Hi and thank you for your response.
    I feel that I need to clarify a few things. Here is my parameter-map config (a bit edited):
    parameter-map type webauth global
    virtual-ip ipv4 1.1.1.1 virtual-host webauth.example.com
    intercept-https-enable
    parameter-map type webauth webauth_external
    type webauth
    redirect for-login https://webauth-external.example.com/v2/login.html
    redirect portal ipv4 x.x.x.x
    So the problem here is that a web browser of the client gets the following redirect URL:
    https://webauth-external.example.com/v2/login.html?switch_url=https://1.1.1.1/login.html&redirect=http://www.cnn.com
    Then after a successful login on the external portal, the user gets redirected back to https://1.1.1.1/login.html. Here is the core of my problem. I think that the parameter "switch_url" should be with the name webauth.example.com since I configured it as the "virtual-host". This is the behavior we see with our old Cisco WiSM1.
    When the redirect goes to https://1.1.1.1/login.html the client complains about the certificate, because it is not issued to that IP address but to the hostname.
    I can verify that the client does not complain about this if I manually edit the redirect URL on the client to the following:
    https://webauth-external.example.com/v2/login.html?switch_url=https://webauth.example.com/login.html&redirect=http://www.cnn.com
    Then the redirect after authentication goes to https://webauth.example.com/login.html and the client accepts the certificate and everything is peachy.
    Do you see my problem? And yes, the virtual IP resolves to the name in DNS.

  • Manually adding something to List of Known Hosts?

    Where can I find the lists of known hosts to add an IP? Also, does it support wildcards? (eg: 123.345.67.*)

    the known host file is inside the hidden ssh folder in your home folder.
    ~/.ssh/known_hosts
    to edit it you would be best using the terminal and with the text editor nano. The command in the terminal is
    nano ~/.ssh/known_hosts
    make your edit
    then press control+O followed by control+X
    however there is an encrypted key for each host. So you are best just let the system add the host when prompted.

  • MalformedInputException Error in Adapter module for SFTP channel

    Dear All,
    I am using MessageTransformBean in adapter module for Plain to XML conversion. The channel works fine in all the cases but when I recieve     "  ì " or few more special characters in the file my channel does not pick file and show below error.
    Error: com.aedaptive.adapter.sftp.SFTPException : Aborting processing: com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
    I am using below parameter value in adapter module.
    Transform.Class : com.sap.aii.messaging.adapter.Conversion
    Transform.ContentType : text/xml;charset=ISO-8859-1
    Please help me if any of you have faces such error in your developments.
    Avanish

    Hi Grzegorg,
    I have tried using UTF-8 encoding in my channel but this doesn't work. Communication cahnnel is still giving same problem.
    Error: com.aedaptive.adapter.sftp.SFTPException : Aborting processing: com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
    The file which we are trying to process have character  Ì and as far as my serach is concerned i think this belongs to charset ISO-8859-1.
    Any more suggestion Guys to solve this problem.
    Thanks and Regards
    Avanish

  • Receiver SFTP Channel giving error

    Hi PI Experts,
    My scenario is ECC->PI->SFTP server.
    I am using Password based Authentication to send files to SFTP server using SFTP adapter.
    Now SFTP adapter giving the error like "Message could not be forwarded to the JCA adapter. Reason: com.jcraft.jsch.JSchException: Auth failed".
    I am able to login to SFTP server with provided User ID and Password through WinSCP tool. But when I tried to place files through SFTP adapter, it is throwing the above error.
    I have configured the Server IP (not host name), Port and Server fingerprint.
    I am using the PI7.31 SP08.
    Could anyone please help me on this issue?
    Thanks,
    Govindu.

    Hi Govindu,
    The problem could be some things, check these notes
    1945020 - SFTP Recevier channel throws UnsupportedOperationException
    1514898 - XPI Inspector for troubleshooting XI
    Regards.

  • BCM/SWIFT payment,  parameter file Receiver channel

    Iu2019m using the  u201CSWIFT_payload_parFile_Splitu201D Operation Mapping for the FILEACT payment transaction.
    The result should be
    1) payload file
    2) parameter file (*.par)
    This seems to work just fine. My problems starts with  the receiver channel for the *.par file.
    I need to know more about how to setup the modules and parameters in the "*.par" receiver channel.
    Is there a configuration guide for this?
    Thanks.
    Frank

    Hi Frank,
    I am facing similar issue. I am able to generate the parameter file but the overrides section contains only one parameter "Request Type" whereas there are other parameters that are mandatory. How do I get these filled?
    Regards,
    Deepthi

  • Using dynamic configuration to modify parameter in sender channel?

    Hi,
    I would like to be able to set the filename in an SFTP sender communication channel (based upon a name determined at runtime, which is read from another file).
    My understanding is that parameters set in dynamic configuration can only be set as part of mapping therefore I cannot see how to set these before my sender communication channel is invoked.
    Please can someone confirm if there is a method of achieving this requirement.
    Thanks,
    Alan

    Hi,
    >>>My understanding is that parameters set in dynamic configuration can only be set as part of mapping therefore I cannot see how to set these before my sender communication channel is invoked.
    they can be set anywhere in the message flow - in adapter modules too for example
    >>>I would like to be able to set the filename in an SFTP sender communication channe
    you cannot set it before the adapter starts polling from anything else
    what you can do is to create a file -> java proxy (sftp) - anything flow
    read this another file first -> call SFTP from a java proxy in a sync way to fetch the second file using the name from the first one -> do anything else what you need
    you can also do the same with one adapter - axis (put the file fetching and sftp call inside one class)
    but it  requires some java knowledge - but it would work in one sender adapter in this case
    Regards,
    Michal Krawczyk

  • BizTalk 2013 SFTP Adapter : Host Instance configured for SFTP Receive cause high CPU usage

    Hi,
    Our BizTalk 2013 Server test env have 16 GB RAM.  We have one SFTP Receive Location which is using a dedicated Host instance for SFTP receive.
    As soon as we start this SFTP Host Instance it starts consuming 50-60% CPU. (Even when it is not handling any file receive)
    As suggested in below thread, to fix this issue, we changed the SFTP RL default configuration. i.e. Changed polling interval from default 0 sec to
    10 minutes and also changed the RL Schedule window to business hours only.
    https://connectedpawns.wordpress.com/2014/04/13/biztalk-2013-sftp-adapter-biztalk-host-receiving-throttled-because-processmemory-exceeded-the-configured-throttling-limit/#comment-2602
    Even after changing the RL configuration , the Host Instance continuously consumes ~60% CPU.
    Any suggestions to troubleshoot more on this issue ?
    Thanks in advance !!
    Anoop

    This is one of the issue which has already been raised to Microsoft and hopefully a public build will be available soon  in next cumulative update pack .
    There are variety of reason for this starting for password mismatch or password not given , SFTP adapter unable to connect and so on .
    There is good post here in below link for this issue
    http://thoughtsofmarcus.blogspot.co.uk/2013/06/leaving-password-blank-in-biztalk-2013.html
    Another greate artcicle is by Nino which states these issues .SFTP adapter is  protocol  sensitive and some configuration by server side, can cause a lot of crazy situations
    http://ninocrudele.me/2014/01/29/checkstat-and-sftp-adapter-issues/
    Thanks
    Abhishek

  • Pound Sign (u00A3) in Sender SFTP Channel  - using MessageTransormBean

    Hi,
    I am reading a csv file using Seeburger SFTP Sender Communication channel.
    One of the field has pound sign  like    £250 forTution
    With default UTF-8 codepage I am geting a square symbol instead of £ sign.
    I tried to set codepage to ISO-8859-1 and windows-1252 and other UTF code pages using MessageTransformBean's Transform.ContentType = text/xml;charset=ISO-8859-1
    They are giving some other special characters for £ sign.
    What is the correct code page we should use to read £ sign correctly into payload. Any suggestions are greatly appreciated.
    Regards,
    Ramesh

    Thank you Stefan! That helped me too. I have only one additional remark.
    My problem was that this solution didn’t work at the beginning because the line
    Plain2XML Transform.Class com.sap.aii.messaging.adapter.Conversion
    was always the first line. Every time I tried to put the ContentType line in the first row it becomes the second after saving.  So I’ve done the following trick. I added the MessageTransformBean twice with the names Plain2XML_Step1 and Plain2XML_Step2 (in this order). In the module configuration part I added the following three lines:
    Plain2XML_Step1 Transform.ContentType text/plain;charset=iso-8859-1
    Plain2XML_Step2 Transform.Class com.sap.aii.messaging.adapter.Conversion
    Plain2XML_Step2 Transform.ContentType text/xml;charset=utf-8

  • SFTP channel error

    Hi,
    I am using SFTP where I am converting a flat-file to XML using module. I am getting the following error in channel:
    Could not deliver message to XI: com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=Srv_AB;TS=;AN=AB_Pick_Send_out_asy;ANS=urn:whs:abc:mm:global:whsmgmt:pick:100;
    where Srv_AB is the sender service, urn:whs:abc:mm:global:whsmgmt:pick:100 is MT namespace.
    Thanks,
    Vishal

    I tested using 'Test Configuration'.. It is failing at Interface Det and Mapping:
    Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_AB_Pick_Intermediate_to_DELVRY03_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Parsing an empty source. Root element expected! </Trace>
    Basically, I've an Interface mapping which uses Java mapping to create an Intermediate structure. This intermediate structure is then used as source message in graphical mapping.
    First I do an FCC on the flat file(Contains special characters). This is the input to Java mapping. Can there be any problem because of special characters.
    Thanks,
    Vishal

  • How do I enable "Host-key" for my sftp server on ISE?

    Hello,
    I am having trouble copying my ISE 1.2 upgrade files to my local repositories.
    Here is a cut and paste from my CLI on one of my ISE nodes after attemtping to copy from my workstation (running an SFTP server) to one of my ISE nodes.
    XXX-ise-01/admin# Copy sftp://<My_SFTP_Server_IP_Address>/ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz. disk:/
    Username: Admin
    Password:
    % ERROR : Backup failed due to one of the following reasons
    1. host-key option is not configured
    2. host key is removed because of re-image
    3. host key is removed from some other repository having same ip/hostname
    % Please reconfigure the host-key option
    % Error: Transfer failed
    I have not configured anything with the "Host-Key" option.
    I have googled and searched but can only find limited references to the "Host-key" command within Cisco. I have tried various forms of this on the ISE node with no luck.
    I tried an FTP transfer but that did not work.
    Any ideas?

    I was wondering why the last character is capitalized. Also are you able to copy files from the disk file over to the same repository. I havent had any problems and I see in a seperate thread that the user gave other directions on how to transfer the file.
    If you can open two ssh connection and try to run the following command to tail the logs:
    "show logging system ade/ADE.log tail"
    You should get some messaging behind the error you are receiving, for example I went to look for a file that did not exist (even though I am using ftp you should get the same error).
    Here is when the transfer fails:
    2014-01-02T13:41:22.506519-06:00 ise01 ADE-SERVICE[4786]: [30325]:[info] transfe
    r: cars_xfer.c[264] [tadmani]: ftp copy in of ftp://172.16.249.1/test requested
    2014-01-02T13:41:22.522470-06:00 ise01 ADE-SERVICE[4786]: [30325]:[error] transf
    er: cars_xfer_util.c[349] [tadmani]: curl error: FTP: couldn't retrieve (RETR fa
    iled) the specified file
    2014-01-02T13:41:22.523040-06:00 ise01 ADE-SERVICE[4786]: [30325]:[error] copy:
    cm_copy.c[1144] [tadmani]: local file disk:/ transfer from url ftp://172.16.249.
    1/test failed retcode=-302
    2014-01-02T13:41:22.527148-06:00 ise01 ADEOSShell[30325]: ADEAUDIT 3017, type=CO
    PY, name=COPY IN FILE FAILED, username=tadmani, cause=Error while copying file f
    rom remote system, adminipaddress=172.16.247.12, interface=CLI, detail=Disk file
    disk:/ transfer from url ftp://172.16.249.1/test failed
    Here is when login fails:
    curl error: FTP: login denied
    Here is some logging around a successful transfer -
    2014-01-02T13:44:46.897499-06:00 ise01 ADE-SERVICE[4786]: [30766]:[info] transfe
    r: cars_xfer.c[264] [tadmani]: ftp copy in of ftp://172.16.249.1/running-config
    requested
    2014-01-02T13:44:46.934972-06:00 ise01 ADEOSShell[30766]: ADEAUDIT 2042, type=CO
    PY, name=COPY FILE, username=tadmani, cause=Copied a file, adminipaddress=172.16
    .247.12, interface=CLI, detail=Copied disk file disk:/ from url ftp://172.16.249
    .1/running-config successfully
    Thanks,
    Tarik Admani
    *Please rate helpful posts*

  • "expression parameter" on buss channel strips

    In MS2 I notice that buss channel strips now include "expression" CC#11 parameter now. Is there a way to filter MIDI CC#11 from the buss channel strips?
    I am using a keyboard setup that produces multi MIDI channel data.
    Thanks for any opinions!
    Rexxsoul

    Thank you for your reply.
    I'm already using a foot pedal control in the layout for expression control to all soft-synth channels.
    So I tried your suggestion at the Concert level, and since it's expression control also, every channel strip with expression is activated when the foot pedal is moved.
    Any thoughts would be appreciated.
    Thanks again!

Maybe you are looking for