SAP Cloud SDK : Creation of Form using Business Object Error

Hi Experts,
I have created custom business object with object based screen and i want to create form for this custom business object.
I have tried using this.
Step 1. Right Click on Business Object and select Create Form option.
Step 2. Enter the require information and click on Next
Step 3. Select the element from the business object you need to display in the form
Step 4. Select the default language English and Next and Finish it,
After finish it the form open in adobe reader automatically but i am getting error as shown below.
and In the solution explorer i can see this.
Can anyone help me why it display the error while open the newly created form.
What are the software i need to install or add-ons in my system to open the from or remove this error.
I have installed the Adobe Life Cycle Designer For SAP Business ByDesign 135.0XXX, Adobe Reader X(10.1.3) , SAP Business ByDesgin Add-In Adobe Life Cycle designer.
Kindly any software missing or any add-ons require to be install or upgrade?
Many Thanks,
Mithun

Hello Alessandro,
I have solved the multiple line display in the table.
I have issue to display the no of character in the table.
I have Create custom business object and create the form i am using the TectCollection type in table level in businessobject node.
Case 1. This is my Entry1 in the business object and it display as shown below.
Here in the table "Undefined Text" is my 1000+ character text.
When i click on preview button the data display under the PDF as shown below.
Here the above screen we can see that the data comes perfectly in the PDF without missing data in table level.(Please i have not rename the columns name).
Case 2. When i Create new entry 2 and enter the multiple lines into the table as shown below.
Here in the above screen we can see that i have multiple row under the table.
When i click on preview button the PDF display with all the line under the table but the data is missing under the third column as shown below.
Here above screen display the same result but the in the yellow highlighted part full data not display as previous case 1.
Why the full data display in Case 1 and not in Case 2?
Is there any configuration to display data ?
Also i can not change the property of the page in form to "Allow Page Break with Content" this option is disable.
Kindly suggest me what is wrong in this PDF design.
Regards,
Mithun

Similar Messages

Step By Step Creation Of A new Business Object

hi,
Please Give Me Details Of A Business Object,like step by step creation of a new business object and it's utilization.

Create a business object (SWO1).
Give the business object name prefixed with Z_.
Enter the following fields with values:
Object type:      Z_TESTXX
This is the internal technical key. Page: 1
Object type can have maximum 10 characters. This must be unique across all object type. Objects are specific instances of object types at runtime.
Object name: Object_Name_for_XX
The object type is addressed with this name by external applications. This is a descriptive English name and can be up to 32 characters. This also must be unique across all object type.
Name:      Object Name: XX
This is a meaningful name of the business object.
Description:     Object Description: XX
Page: 1
Object description, can be up to 40 characters.
Program:      Z_TESTXX
Each object type has an ABAP/4 program in which methods of the object are implemented. This program is generated automatically when you create or revise an object type.
Application: indicates cross application.
3: Create an event.
Open the Object type in change mode. When you change your subtype the first step is to create a new event, this is done by selecting the Event node and clicking the create button. Give the event a name and a description. Next set the status of this object type component to implemented.
Event:          Z_EVENT_XX
Name:          Event name: XX
Description:     Event Description: XX
Click on the new event andu2026
Edit - Change Release Status- Object Type Component - Implemented
(A small box sign vanishes from the right side of the event, indicating that it is implemented)
There can be multiple triggering events for a standard/customer task.
In R/3 4.0 the release strategy for new Object Types and Object Type Components (methods, attributes, events, etc.) was enhanced. Now when an object type and/or components are created, there are different statuses to select, based on its required purpose. The statuses are:
u2022     Modeled - objects cannot be accessed at runtime. This is the status that is automatically set when an object type or component is created. Items with a modeled status cannot be referenced in any type of workflow task.
u2022     Implemented - objects can be used internally in a test environment. They are accessible, but may not be stable (especially if no delegation has been defined).
u2022     Released - objects are ready for production. Note: Local objects cannot be released.
u2022     Obsolete - objects are typically replaced by new functionality or incompatible with previous versions.   This status is optional.
4: Create a method.
Next a method must be created without using any function module template. When creating the method ensure that the method call is synchronous - this means that the method doesn't require a terminating event.
A method can be synchronous or asynchronous. Synchronous Method
Method that, for the duration of its execution, assumes the process control and, after its execution, reports to the calling component (work item manager, in this case).
Synchronous methods can return the following data, if defined: Return parameters, one result and Exceptions.
Terminating events can also be defined for a single-step task described with a synchronous method. At runtime, the relevant work item is then terminated either when the synchronous method is successfully executed or when one of the defined terminating events occurs.
Asynchronous Method
Method that, after its execution, does not report directly to the calling component (work item manager, in this case).
Asynchronous object methods do not return results, parameters or exceptions.
At least one terminating event must be defined for a single-step task described with an asynchronous object method.
At runtime, the relevant work item is only terminated if one of the defined terminating events occurs.
Next set the status of this object type component to implemented. The methods are not implemented unless you once open their program. Select the method and open its program. It gives a message u201CDo you want to generate a template automatically for the missing sectionu201D. Click u201CYesu201D. Inside the program insert the code u201CCALL TRANSACTION u2018FB03u2019. Display Financial Document.
Method:     Z_METHODXX
Name:      Method name: XX
Description:     Method Description: XX
Edit - Change Release Status - Object Type Component - Implemented
5. Create Key fields.
Create key fields with ABAP dictionary field proposal.
It is the identifying key, via which the system can access a specific object, that is, an instance of the object type. The key fields of an object type are usually also the key fields in the table containing the header data for the object type. Only character-based data types are allowed as key fields. The total length allowed for all key fields is 70 characters. Each key field refers to a field in the ABAP Dictionary.
Enter u2018BKPFu2019 in table name field and select all the key fields. Press Continue button. Next set the status of these key fields to implemented.
Edit - Change Release Status -Object Type Component - Implemented
6:Implement business object.
The whole business object needs to be implemented so click on the business object title andu2026
Edit - Change Release Status - Object Type - Implemented
Now you can check the syntax, generate the Business Object and then test it. Execute the custom method you created and give the Company code, Document number and Year.

Extract account Based COPA from R/3 using Business Object data services

Hello,
We have a requirement to extract Account Based COPA from SAP R/3 to Teradata using Business Objects data services.
I have read couple of white papers which give information on Rapid Marts( which are built in packages) already available for some applications like inventory, GL, AP, AR etc. But I could not find anything for COPA.
Would anyone give me any information on how to use BO data services for COPA?
Also if there is no rapid mart available for COPA, does anyone know how to create custom data marts in BO Data services?
Is there any document available on this?
Please respond as soon as possible.
Thanks.

Hi,
this forum is for the SAP Integration Kit. Would suggest you post your question into the EIM area for Data Services.
Ingo

SSO2DB / Use Business Objects Credential Mapping

Hi,
We standardized our universe connections to SQL Server on "Use Single Sign On when refreshing reports at view time". There however is an issue with this when scheduling reports, see
1199774 - How to schedule Web Intelligence documents based on SSO2DB universes for Oracle and SQL Server to avoid scheduling issues
Given the solution proposed there is not optimal for us, we are looking at an alternative by standardizing on: "Use Business Objects Credential Mapping" on the universe connection. We want to use OLE DB (SQL Server native connection) for querying.
There are 2 ways to do this:
1. On universe connection, in the tab "Database Middleware", we directly select OLE DB. This way we do not need to create a DSN. We however get: A database error occured. The database error text is: Microsoft SQL Native Client : Login failed for user '<user>'.. (WIS 10901)
Apparently the default authentication mode to SQL server is "native". SQL server specific user. When we create a native SQL server <user> with same password as in the mapped database credentials in the CMC, it works fine. Indicating native SQL server authentication is used instead Integrated Windows authentication.
Can we somehow change the authentication mode towards SQL server to Win AD?
Can we get to the SSO2DB functionality in this way?
2. When selecting ODBC on universe connection in tab"Database Middleware", we can still use OLE DB by creating a DSN based on the SQL Server native drivers. This also allows use to fix the DSN on authentication setting "With Integrated Windows authentication".
When we run a WebI report from InfoView and select as one of the objects the "system_User", we get the service account running the SIA. This account is also running the WebIntelligenceProcessingServer.
Does the credential mapping setting not work in this setup?
We expected the DBUSER/DBPWD to be passed.
See also SSO2DB / Use Database Credentials
Quote "Use DB credentials is not kerberos it uses DBuser/DBpass variable for accounts if they are populated. I currently have an escalation in on this with SQL there may be a bug with AD users although SQL users work fine."
Thx in advance!
Raf

Ganesh, using BO credentials will only work if you have BO logins that map to specific users in SAP BW.
It may be that you wish to section the BW reporting differently to the SAP reporting or that there are specific requirements for a particular reporting area where you can in effect use an "overrule" to replace an individual's log in with one that has a wider set of access privileges for reporting purposes. Quite why you'd let them report on more than they can see in SAP, I don't know, but there you go!
It's more traditionally used in database-based universes for a variety of reasons, particularly access.

Add datas to UDT using business objects

Hi,
How to add datas to user defined tables using Business Objects.
Regards,
M.Dhivya.

Hi,
Check for following provided bt SAP...
Dim ret As Long
d
Private Sub Add_Table_Click()
    Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
    Set oUserTablesMD = oCompany.GetBusinessObject(oUserTables)
    ' When adding user tables or fields, use a prefix
    ' identifying your partner name space. This will
    ' prevent collisions from different partner add-ons
    ' SAP's name space prefix is "BE_"
    'Set the two mandatory fields
    oUserTablesMD.TableName = "T1"
    oUserTablesMD.TableDescription = "Table1"
    'Add the table (which contains 2 default, mandatory fields, 'Code' and 'Name')
    ret = oUserTablesMD.Add
    If ret <> 0 Then
        oCompany.GetLastError ret, Str
        MsgBox Str
    Else
        MsgBox "Table: " & oUserTablesMD.TableName & " was added successfully"
    End If
End Sub
Private Sub Add_UDF_Click()
    Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
    Set oUserFieldsMD = oCompany.GetBusinessObject(oUserFields)
    oUserFieldsMD.TableName = "T1"
    oUserFieldsMD.Name = "AlbUDF"
    oUserFieldsMD.Description = "Albert UDF"
    'Add the field to the table
    lRetCode = oUserFieldsMD.Add
    If lRetCode <> 0 Then
        oCompany.GetLastError ret, Str
        MsgBox Str
    Else
        MsgBox "Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table"
    End If
End Sub
Private Sub Add_Data_Click()
    Dim oUserTable As SAPbobsCOM.UserTable
    Set oUserTable = oCompany.UserTables.Item(1)
    oUserTable.GetByKey ("T1")
    'Set default, mandatory fields
    oUserTable.Code = "A"
    oUserTable.Name = "Albert"
    'Set user field
    oUserTable.UserFields.Fields.Item("U_AlbUDF").Value = "1"
    oUserTable.Add
    If ret <> 0 Then
        oCompany.GetLastError ret, Str
        MsgBox Str
    Else
        MsgBox "Value to field: '" & oUserTable.UserFields.Fields.Item("U_AlbUDF").Name & "' was updated successfuly to " & oUserTable.TableName & " Table"
    End If
End Sub
Hope this helps,
Vasu Natari.
Edited by: vasu natari on Jun 12, 2009 11:21 AM
Edited by: vasu natari on Jun 12, 2009 11:21 AM

What is the use Business objects over WAD.

Hi Folks,
what is the use Business objects over WAD.
How sap bw is going to use Business Objects.
Thanks,
Cheta.

hi,
A business object is a master record within the Measurement System, and is defined as part of the measurement class within Customizing.
Examples of business objects are wells, well completions, and measurement points.
Once the measurement object is maintained, it is saved with the business object so that when viewed, the measurement object is part of the business object.
regards,
Siddharth.

Is there a way to use business objects in the program or function module?

Hi Experts,
Is there a way to use business objects in the program or function module.
Thanks in Advance.
Naval bhatt

Hi Naval,
Ofcourse you can use business objects in your programms/ methods.
You can use function modules or macros (available from include <cntn01>) for using business objects in your application.
refere following two links for startup information
http://www.sap-img.com/abap/reading-attribute-of-a-business-object-in-abap.htm
http://www.jt77.com/business-warehouse/work-flow-12619.html
Regards,
Abhijit

Need to use business objects with a project, please guide on basics.

Hello
I am a dotnet developer (asp.net with C#). I am sorry I dont know much about Business objects. Our client a financial firm wants to use Business object with a web based application. I couldn't got a clear and good understanding of Business object. The client just said Business objects allows dynamically creating reports even clients can create reports very easily even without knowing SQL.
Kindly guide me about Business Object product and its what component I should check for using it. Please mention some links that can give me introduction.
Thanks a lot,
haansi

Hi
Business Objects is not just one tool. You should ask your client what they will use e.g. Crystal Reports or Web Intelligence.
Here you can see half an hour Webinars that give you a good understanding of Business Objects:
Webinars
Regards
Roland

J2EE - Reports using Business Objects.

Hi Friends,
We have a requirement to generate reports in our project using Business Objects v5.1.8.
Some users/Actors will have assess the reports through Webi of business objects and other requirement is to do some selection criteria in web page and once you get the right details, we should be able to generate report directly from web page (Calling .rpt file of Business objects), J2EE application calling business object report. (similar to calling PDF file in browser).
Did any body of you did similar thing and is it possible to do through business objects, I know we can do from crystal reports. Do we need any plug-in ?
I would be grateful, If you have sample code and willing to share.
Thank You
srikanth

oh no, you have that as a requirement! :) well, have fun!! (the guy beside me develops our crystal reports stuff all day).

How to use Business Object like Vendor or PurchasingInfo

Hi,
How to use Business Object ( like Vendor or PurchasingInfo ) from my Object?
For example:
CLASS myEntity DEFINITION.
          PUBLIC SECTION.
               METHODS: getVendor EXPORTING pVendor TYPE Vendor.
           PRIVATE SECTION.
           DATA: aVendor TYPE REF TO Vendor.
ENDCLASS.
CLASS myEntity IMPLEMENTATION.
METHOD getVendor
           pVendor = aVendor .
ENDMETHOD.
ENDCLASS

Hi,
I am giving u a demo Program for ur doubt.
REPORT demo_class_counter .
CLASS counter DEFINITION.
PUBLIC SECTION.
    METHODS: set IMPORTING value(set_value) TYPE i,
             increment,
             get EXPORTING value(get_value) TYPE i.
PRIVATE SECTION.
    DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
    count = set_value.
ENDMETHOD.
METHOD increment.
    ADD 1 TO count.
ENDMETHOD.
METHOD get.
    get_value = count.
ENDMETHOD.
ENDCLASS.
DATA number TYPE i VALUE 5.
DATA cnt TYPE REF TO counter.
START-OF-SELECTION.
CREATE OBJECT cnt.
CALL METHOD cnt->set EXPORTING set_value = number.
DO 3 TIMES.
    CALL METHOD cnt->increment.
ENDDO.
CALL METHOD cnt->get IMPORTING get_value = number.
WRITE number.
For more demo programs type 'abapdocu' in the command field
U will be getting some demo programs.
There select the abap objects.
Regards,
Jagadish

Using Business Objects to query the CRMOD database

Has anybody successfully used Business Objects to query CRMOD via web services? Our BO people are trying to do this and would like to learn from other's experience.
Regards,
Jeff

Please refer to online document "OnDemWebSvcs.pdf". You can download this doc at:
Admin -> Web Services Administration -> Download Documentation
Edited by: PPL on Oct 8, 2011 12:13 AM

Possible to report on QC using Business Objects?

Hello Geeks,
Please excuse me if I am posting this in wrong thread and help me moving it in right one.
As I am new to Sol Man, I heard that we could use Business Objects reporting on/for/with HPQC.
After going through forum links and sdn search, I found that Sol Man Adapter is used for the same.
My simple question, is, can we use HPQC for BO reporting (Universe, Webi), if yes is Sol Man the adapter which could help me to achiecve it? Also do we have any white paper, which will help me to use Business Objects as a QC reporting tool?
Thanks
P

You need someone who is very comfortable with the QC database Schema.
You will need someone who can develop reports for you on the fly. The BO piece can connect directly to the QC database just like a reporting tool like SSRS does and you can build reports and host them on MOSS or something.
That is what I have done in the past and recommend it at places as a best practice.
Knowing the QC schema inside out is the key piece and you do not need any adapter in this whatsoever.

Restriction when using Business object

hi all,
Currently i want to use Business Object to create a new Company code. After searching the Business object in Transaction SWO1, I find 'BUS0002' can realize it. But there is only one import parameter of method 'create' , that's the company code key id.
Is there any solution to import other parameters,such as description of the company code, currency etc. when using the business object to create the company code?
Thanks in advance.
Vivi

hi RS
   just writes a test program :
DATA: BEGIN OF objectkey,
         bukrs LIKE t001-bukrs,
         butxt LIKE t001-butxt,
         ort01 LIKE t001-ort01,
         land1 LIKE t001-land1,
         waers LIKE t001-waers,
         spras LIKE t001-spras,
       END OF objectkey.
objectkey-bukrs = '2010'.
objectkey-butxt = 'My company code description'.
objectkey-ort01 = 'NEW YORK'.
objectkey-land1 = 'US'.
objectkey-waers = 'USD'.
objectkey-spras = 'EN'.
swc_container container.
lv_object_type = 'BUS0002'.
swc_create_object obj lv_object_type ''.
swc_create_container container.
swc_set_element container 'objectkey' objectkey.
swc_set_element container 'CORR_NUMBER' 'EB2K900952'.
swc_set_element container 'SUPPRESSDIALOG' ' '.
swc_call_method obj 'Create' container.
At runtime session, there is no value transfered to the maintainence view except the company code id.
When i go through the program of 'create' method,
i found that:
Call maintenance of CompanyCodeId
CLEAR V_T001.
V_T001-MANDT = SY-MANDT.
V_T001-BUKRS = OBJECT-KEY-COMPANYCODEID.
CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
       EXPORTING
            ACTION                       = 'INS '
            CORR_NUMBER                  = CORR_NUMBER
            VIEW_NAME                    = 'V_T001'
            SUPPRESSDIALOG               = SUPPRESSDIALOG
            INSERT_KEY_NOT_FIXED         = INSERT_KEY_NOT_FIX
       IMPORTING
            CORR_NUMBER                  = CORR_NUMBER
       CHANGING
            ENTRY                        = V_T001.
so i guess, it should be enhanced some coding here, something like
V_T001-BUTXT = OBJECT-KEY-description ?
but i am not sure about it.
What do you think about it?
Thanks again for your kindly help.
Regards
Vivi
Message was edited by:
        Vivi Sun

SAP Cloud SDK : Create Quick or List Modification form require in Embed Component

Hi Experts,
I need requirement to create the quick create or List Modification in embed component.
I have already make button for "Quick Activity" but i need quick create or List Modification from.
I have also try using the following blog.
How to create a List Modification Form?
I have follow the steps.
1) Go to embed component select the "DataModel" and select "DataList" right click on it and select "Add List Modification Structure".
2) Now from the right side selected BOModel Drag and Drop the element you want to display in the Form and bind correctly.
3) Now go to Designer tab and from the "Toolbar" double click on "ListModficationForm" from the Panes.
4) Once the ListModificationForm open in designer open the BO browser and select the Data Model tab.
5) Drag and Drop the element from the newly created "List Modification Structure" in previous steps and under the property window under the "Associated List Modification Structure" select the created List modification structure from the Root.
6) Now create event handler to call this form and under the event add operation "ListModification" and select the operation "Start" and under the List Modification Structure select the created structure from Root.
7) I have assign this event in Add button OnClick Property when i activate and Test it. i getting dump.
Please suggest me in the above steps i have mentioned any step missing or any steps i have do the wrong configuration.
I have create the Custom business object with "Object Based Screen" ( QA, QIF, QWL , PTP,WCF, WCView.
so i try using Quick Create QC using creation of screen but i dont know what the configuration require to call QC from embed component.
Please suggest me if anyone have idea about this 2 solutions.
Many Thanks,
Mithun

Hi Horst,
well, it was just an experiment to test the list modification after the blog entry was published.
So I did not test it extensively.
However, to answer your question:
I did manage to add two items to a list using the Browser, without any perceived anomalies (no dumps or such).
But that's where I stopped experimenting with this feature.
Best regards,
Ludger

SAP Cloud SDK : Display more 500+ character in the PDF form in table cell

Hi Experts,
I have requirement in the PDF form.
Scenario:
My custom business object
businessobject DummyObject {
     element ID : ID;
     element FromDate : Date;
     element ToDate : Date;
     node AllActivity [0,n] {
               element ActivityID : ID
               element ActivityType :
               element Note: Note;
The above business object have node level data and i under this node level data Activity Id , Activity Type and Notes associated with that activity as show below.
so as per the above activity i have retrieve the data for the activity and store into my custom business object at node level ( Activity ID , Activity Name , Activity Type and Notes ) that mentioned above screen.
I have created 1 form and design in adobe life cycle just Drag and Drop the element from the DataView.
After completed the print from i have create the preview button to display the data.
Once i have done all the steps to display the form and click click on preview button i can able to see the data but the under the Note field only display the 256 character not more than that but as per the above screen i have entered the Notes with more than 500+ character.
In the form design i have also change the property for Note field to Allow Multiple value and Rich Tech but data is not display with all the character.
Anyone have idea on which data type display the more than 500+ character in the form.
I am using "Note" data type.
Can anyone suggest me what the solution to display the proper value in the form.
Please let me because i am stuck in this issue.
Many Thank,
Mithun

on the BO, add the following line:
[DependentObject(TextCollection)] node Note;
in some BO action, where the copying happens:
var noteFromActivity; // contains the note from the activity
this.Note.Create();
var el_note_text : elementsof this.Note.Text;
el_note_text.LanguageCode = LanguageCode.ParseFromString("EN");
el_note_text.TypeCode.content = "10006";
var text = this.Note.Create(el_note_text);
var content = text.TextContent.Create();
content.Text.content = noteFromActivity.content;
To display the content of the textcollection, use the following SAP embedded component:
/SAP_BYD_APPLICATION_UI/Reuse/Notes/singletextlangedit.EC.uicomponent
In the embedded component properties, set the TextTypeCode property to "10006".
Bind the embedded component using node reference binding to the BO containing the TextCollection
Bind the LanguageCode to a data field containing the language code for english.
Best regards,
Ludger

SAP Cloud SDK : Creation of Form using Business Object Error

Similar Messages

Maybe you are looking for