KRB5 use TCP vs UDP error code 52

I am using kerberos JAAS authentication and I am getting an error code of 52. Basically some user ids that I have use a lot of groups and as the information grows it crosses the UDP limit and fails.
Is there a way to configure the JAAS to use TCP instead of UDP.
Thanks,
Varun

Seems like JDK 142 (http://java.sun.com/j2se/1.4.2/docs/guide/security/jgss/jgss-features.html) has this support. JDK 142 doc mentions that, it will automatically fallback to TCP if an error is received casue of UDP size limit.
However, I could not get it running successfully with JDK 142 either. JASS module fails with an exception, java.net.SocketException: connection reset. JAAS login module is attempting to use TCP but, for some reason it is failing.
Did it work for anybody? If so, any configurations required to make it work?
Thanks

Similar Messages

Explanation of udp error codes

I would like to know all the possible error codes returned by the UDP vi's.
I am also interested in the same information for tcp and Serial comunication vi's.
At the last i would like to retrive a way to resume this kind of information for every vi that return an error cluster.
tks

Are you Gandalf the white?
I just went into LV help and did a search for error.
The list should the threee subcatagories you listed. A cut-n-paste follows.
TCP and UDP Error Codes
The TCP and UDP functions can return the following error codes.
Code Name Description
53 Manager call not supported.
54 ncBadAddressErr The network address is ill-formed.
55 ncInProgressErr The network operation is in progress.
56 ncTimeOutErr The network operation exceeded the user-specified or system time limit.
57 ncBusyErr The network connection is busy.
58 ncNotSupportedErr The network function is not supported.
59 ncNetErr The network is down, unreachable, or has been reset.
60 ncAddrInUseErr The specified network address is currently in use.
61 ncSysO
utOfMem The system could not allocate the necessary memory.
62 ncSysConnAbortedErr The system caused the network connection to be aborted.
63 ncConnRefusedErr The network connection was refused by the server.
64 ncNotConnectedErr The network connection is not established.
65 ncAlreadyConnectedErr The network connection is already established.
66 ncConnClosedErr The network connection was closed by the peer.
Is this what you need?
You can also "right-click" on an error cluster indicator and do a "explain error".
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Is there a LabView example in the use of user defined error codes?

Specifically, I have a VI that tests four arrays of data against various high/low limits. I have pass/fail outputs for 18 tests. I'd like to combine these into an 'error out' cluster with appropriate error codes and messages, for which I've created an x-errors.txt file.
My first question must be trival - how do I just set the 'status' bit of the error stream to let the general error handler then look up the error desription from the file?
Secondly - I can't find an example of this in the technical resourses, amI missing something?
Thanks,
Mike
Mike Evans
TRW Conekt
N.I. Alliance Member, UK
http://www.Conekt.net

There is no example program. There is extensive help on how to do this. Here's the basics.
1) There are two ways to define user error codes in LV6.1. If you are using LV6.0 or earlier, only one method is possible.
2) The 6.0 method involves wiring arrays of error codes and arrays of error code strings to the General Error Handler.vi. These codes will be used to explain any error code which is undefined in LV's internal error code database. Error codes reserved for users which are guaranteed not to be used by NI are from 5000 to 9999.
3) The 6.1 method allows you to create a specially formatted error code file on disk that will be merged with the LV error code database each time LabVIEW launches. For help on this, go to LV's online help, and in t
he Index tab, type
"user-defined error codes, in text files"
(without the quote marks)
4) If you want to set an error into the error cluster, use the General Error Handler.vi again. Wire your error code value to the Error Code terminal (the leftmost-topmost corner terminal). Wire the name of your VI to the Error Source terminal, and wire "No Dialog" to the Type of Dialog terminal (left-side, near the bottom). The error code cluster that comes out of this VI will either be the error in (if one was set) or a new error code cluster with your error and the status bit set to TRUE.
5) The attached demo is written in LV6.0.
Attachments:
Error_Demo.vi ‏37 KB

Why am I suddenly getting this message from a page I have been using for 6 months(Error code: sec_error_unknown_issuer) how do I get my page back?

Why am I suddenly getting this message from a page I have been using for 6 months(Error code: sec_error_unknown_issuer) how do I get my page back?

Did you reset Firefox recently?
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If that is the case then you may have lost intermediate certificates that were stored in the cert8.db file in the Firefox profile folder.
Check out why the site is untrusted (see the Technical details) and if this is caused by a missing intermediate certificate then see if you can install this intermediate certificate from another source.
Some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer.
You can see more Details like intermediate certificates that are used in the Details pane.

My hp mini using factory image and error cod 0xef0003

hp mini laptop notebook model hp mini 311-1000.........prodact number..VT116PA#ABG its windows 7 I WAS TRIN TO BACK UP ....but icant restor or backup ...its black screen to start and error cod ......0xef0003 and when i try to back up it says contact hp assistant the recovery is using factory image .....

Don't know if this will be of use or not but having had a problem with using the system recovery failed at 85 persent with unable to restore factory image i used the back up disks that to failed infact it wiped the restore partiion i then i ordered a recovery kit from HP thinking my recovery disk three was corrupt,
It tells you in the HP book to only leave your mouse key board and screen connected as i don't give in THIS TIME I LEFT MY ROUTER CONNECTED AND HEY I RECOVERED MY SYSTEM so in my case i should not of removed the router.

I get error -1074388956 when using CAN. This error code is undefined. what could it be? I am using NI-CAN 2.1.2 on WinXP SP1.

I've tried to search for it but come up with nothing.

You can convert this decimal code to HEX Code. If you do so, the HEX code looks like BFF62024. This Code means the Board handle is invalid. This could happen if you use not a valid handle because of race conditions within variables or close functions within the code.
Please check the handles within your code.

Adobe air incompatible with ASUS me302c, a android tablet using Intel atom processor. error code -24

Is adobe working on the compatibility of AIR with Intel system on android devices?

Air on intel x86 android is causing a good amount of grief to a lot of folks. Please vote !! https://bugbase.adobe.com/index.cfm?event=bug&id=3648268

Communication between Windows 7 and Windows 8(and above) using Sockets(TCP and UDP)

I need to use TCP and UDP using Sockets to communicate between two(or more) applications installed in Windows 7 and Windows 8.
Is it possible.? I tried within a LAN, but in vain. If needed I would post the appropriate code.
Note: I only tried running exe(s) in these machines and not with installation.

Hello Prabodh.Minz,
>>Is it possible.?
It is not clear what develop language you are using, here are examples which uses the C# based on .NET. It created the communition between two machines by using sockets with TCP protocol, a server and a client:
Synchronous example:
Client and
Server.
Asynchronous example:
Client and
Server.
Multi-client per one server - socket programming in .net(C#)
>>Note: I only tried running exe(s) in these machines and not with installation.
There are all .exe.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JCOP Tools Problem Error code: 6985 (Conditions of use not satisfied)

I have a problem with the JCOP tools. I am developing a very simple applet which does nothing at all. It is a "hello world" type applet so that I can get something working. It compiles ok, however as soon as I try to run it under the emulator I get an error.
Status: Conditions of use not satisfied jcshell: Error code: 6985 (Conditions of use not satisfied) jcshell: Wrong response APDU: 6985
This always happens when the jcshell issues the install command.
The install command is:
install -i 1234567890 -t -l -d -m -p -s -b -e -q C9#(1234567890) 1234567890 1234567890
I must be doing something very basic incorrectly. I have tried searching the forums and internet and I haven't found anything. Any help would be appreciated.
The code is this:
package pt.microfil.test;
import javacard.framework.*;
import javacard.framework.ISO7816;
import javacard.framework.ISOException;
import javacard.framework.APDU;
public class testcard extends Applet {
     final static byte CLASS = (byte) 0x80; // Class of the APDU commands
     final static byte INS_READ = (byte) 0x02; // instruction for the READ APDU command
     // this is the text string which will send back from the ICC to the IFD
     final static byte[] text = {(byte) 'e', (byte) 't', (byte) 's', (byte) ' ',
     (byte) 'g', (byte) 'e', (byte) 'h', (byte) 't', (byte) 's', (byte) ' ',
     (byte) 'd', (byte) 'e', (byte) 's', (byte) ' ',
     (byte) 'G', (byte) 'l', (byte) 'u', (byte) 'm', (byte) 'p'};
     public static void install(byte[] bArray, short bOffset, byte bLength) {
          // GP-compliant JavaCard applet registration
          //new testcard().register(bArray, (short) (bOffset + 1), bArray[bOffset]);
          new testcard().register();
     public static void install() {
          new testcard().register();
     public void process(APDU apdu) {
          byte[] cmd_apdu = apdu.getBuffer(); // the cmd_apdu variable is used because of performance reasons
          if (cmd_apdu[ISO7816.OFFSET_CLA] == CLASS) { // it is the rigth class
          switch(cmd_apdu[ISO7816.OFFSET_INS]) {      // check the instruction byte
          case INS_READ: // it is a READ instruction
          // check if P1=P2=0
          if ((cmd_apdu[ISO7816.OFFSET_P1] != 0) || (cmd_apdu[ISO7816.OFFSET_P2] != 0)) {
          ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
          } // if
          // check if P3=length of the text field
          short le = (short)(cmd_apdu[ISO7816.OFFSET_LC] & 0x00FF); // calculate Le (expected length)
          short len_text = (short)text.length; // the len_text variable is used because of performance reasons
          if (le != len_text) {
          ISOException.throwIt((short)(ISO7816.SW_CORRECT_LENGTH_00 + len_text)); // give the expected length back to the IFD
          } // if
          apdu.setOutgoing(); // set transmission to outgoing data
          apdu.setOutgoingLength((short)len_text); // set the number of bytes to send to the IFD
          apdu.sendBytesLong(text, (short)0, (short)len_text);
          break;
          default : // the instruction in the command apdu is not supported
          ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
          } // switch
          } // if
          else {         // the class in the command apdu is not supported
          ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
}

i also found this error and i change the package name and applet id.it is not changing.now i got same error.
cm> install -i 6d796170702e617070 -q C9#() 6d797061636b616765 6d796170702e617070
jcshell: Error code: 6985 (Conditions of use not satisfied)
jcshell: Wrong response APDU: 6985
Unexpected error; aborting execution
how can i solve the problem??

HT201210 I'm getting this error code 1816 on my computer when I try and restore my ipod touch 2g or 3g not sure if i should get rid of this or fix it

Hi, I'm Caleb, I recently tried restoring my apple ipod touch 2nd gen it will not restore so I can use it, It has error codes that won't show up on the customer support. Recent Error code 1618, please tell my how I can fix this problem, thank you.

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Hi i am trying to install itunes and it wont install due to error code 2349 how do i fix this issue

i have tryed on numerous occasions to install itunes and it sometimes installs but then i cant use it due to error code 2349, so i uninstall and try again and wont install it at all due to error code 2349 please help i really eant to use my ipod

Refer to this thread:
https://discussions.apple.com/thread/3174150?start=0&tstart=0

CUSP changing transport to TCP from UDP in VIA headers

How does CUSP decide when to use TCP vs UDP when forwarding INVITES to CUCM when both UDP and TCP are configured on the Network Listen Ports? We have two different calls flows coming from our SBC to CUSP. Both INVITES have UDP as the transport. CUSP forwards one call flow to CUCM with TCP as the transport and the other as UDP. Is there something unique to the first INVITE below that would signal CUSP to use TCP?
Invite from SBC that CUSP adds TCP as the transport in the VIA header towards CUCM
40:13.979 On [2:245]10.XXX.XXX.XXX:5060 sent to 10.240.XXX.X:5060
INVITE sip:XXXXXXXXXX@cusplab:5060 SIP/2.0
Via: SIP/2.0/UDP 10.XXX.XXX.XXX:5060;branch=z9hG4bKm2u8f32038e12is8p3v1.1
From: "Test User 1" <sip:[email protected]:5060>;tag=SDi82if02-13984769016573306_c2b04.1.2.1378274120440.0_1121221_2220804
To: <sip:[email protected]>
Call-ID: SDi82if02-2664bc8b12611edfd30a0552529e0b90-cggngq0
CSeq: 2 INVITE
Session-Expires: 1800
Min-SE: 1800
Allow-Events: telephone-event
Cisco-Guid: 3327242752-0000065536-0000181788-1640976394
Acme-Call-ID: 9AA7C362-1BBC11E3-81019B0F-C8BF5371
Timestamp: 1379084661
Expires: 180
Supported: timer,replaces,sdp-anat
P-Asserted-Identity: "Test User 1" <sip:[email protected]>
Allow: INVITE,ACK,CANCEL,BYE,INFO,PRACK
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 59
Contact: <sip:10.XXX.XXX.XXX:5060;transport=udp>
Content-Length: 325
Content-Disposition: session; handling=required
Content-Type: application/sdp
v=0
o=CiscoSystemsSIP-GW-UserAgent 2487 3295 IN IP4 10.XXX.XXX.XXX
s=SIP Call
c=IN IP4 10.XXX.XXX.XXX
t=0 0
m=audio 55178 RTP/AVP 18 100 101
c=IN IP4 10.XXX.XXX.XXX
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:100 X-NSE/8000
a=fmtp:100 192-194
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
INVITE from SBC that CUSP adds UDP as the transport in the VIA header
15:14.881 On [2:245]10.XXX.XXX.XXX:5060 sent to 10.240.XXX.X:5060
INVITE sip:XXXXXXXXXX@cusplab:5060 SIP/2.0
Via: SIP/2.0/UDP 10.XXX.XXX.XXX:5060;branch=z9hG4bKg04f5a105040ei4764o1.1
From: "Test User 2" <sip:[email protected]:5060>;tag=SDdeh1202-125657148404519E-4_c2b09.2.1.1376631876821.0_2507555_4963634
To: <sip:[email protected]>
Call-ID: SDdeh1202-c8199578035cb96793dbe0fb6ef98d84-cggjoq2
CSeq: 2 INVITE
P-Asserted-Identity: "WIRELESS CALLER" <sip:[email protected]:5060>
Allow: INVITE,ACK,CANCEL,BYE,INFO,PRACK
Accept: application/sdp, application/isup, application/dtmf, application/dtmf-relay, multipart/mixed
Max-Forwards: 64
Contact: <sip:10.XXX.XXX.XXX:5060;transport=udp>
Content-Length: 266
Content-Disposition: session; handling=required
Content-Type: application/sdp
v=0
o=Sonus_UAC 12183 15514 IN IP4 10.XXX.XXX.XXX
s=SIP Media Capabilities
c=IN IP4 10.XXX.XXX.XXX
t=0 0
m=audio 55134 RTP/AVP 18 0 100
a=rtpmap:18 G729/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:100 telephone-event/8000
a=fmtp:100 0-15
a=sendrecv
a=maxptime:30

Hi. Did you ever find out the reason and a solution to this problem. I am having the same issue where CUSP decides to change the transport type to TCP (from UDP) when talking to CUCM on certain invites from Acme SBC. On some invites from the same Acme SBC, CUSP doesn't change the transport type and leaves it as UDP.
Thank you.

I keep getting an error code U44M1P7 when trying to update camera raw

Can anyone help? I keep getting an error code when trying to update my camera raw, and 3 other updates. I am using a mac.

IMO Adobe left a Program out of the typically list namely Photoshop
Troubleshoot Update Errors
Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
ISSUE: The adobe update 13.0.1.2 errors with code U44M1I210.
SOLUTION: Restart your system, download and install the updates manually. See “Solution 3″ here. http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
========================================================================================== ======================================================
To fix the update install problems I've had with CC I use the direct installer I downloaded from Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools Follow the download instruction to the letter otherwise you will be denied access. Once to have it. Install CC on top of itself. That will back level CC to CC version 14.0. Then use Photoshop menu Help>Updates. All updates should install and all the extensions and addition you made to cc will still be there.

Question about error-code in web.xml

Can you use pattern matching for error-codes?
Instead of
<error-code>401</error-code>
<error-code>403</error-code>
<error-code>404</error-code>
etc..
you could just do
<error-code>4*</error-code>

I don't know a replacement for this, but I recommend to post this questione into Servlets section to get more chances for receiving answers...
Regards,
Mohammed Saleem

I keep getting an error code -69 when restoring my itouch

downloaded io5. when i tried to restore my music, got an error message saying cannot sync file not found. error code -69 or -49

IMO Adobe left a Program out of the typically list namely Photoshop
Troubleshoot Update Errors
Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
ISSUE: The adobe update 13.0.1.2 errors with code U44M1I210.
SOLUTION: Restart your system, download and install the updates manually. See “Solution 3″ here. http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
========================================================================================== ======================================================
To fix the update install problems I've had with CC I use the direct installer I downloaded from Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools Follow the download instruction to the letter otherwise you will be denied access. Once to have it. Install CC on top of itself. That will back level CC to CC version 14.0. Then use Photoshop menu Help>Updates. All updates should install and all the extensions and addition you made to cc will still be there.

KRB5 use TCP vs UDP error code 52

Similar Messages

Maybe you are looking for