Kudos to Everweb support team

I haven't got a question but I wanted to post about an experience I just had with RAGE Software's Everweb web builder. With some skepticism I stopped using iWeb (for obvious reasons) and turned to Everweb about six months ago. While nothing is perfect Everweb does everything it said it would do. They even added live phone support which sealed the deal for me. I recently experienced a catastrophic fail with one of my projects and it looked like i was about to lose about 8 hours of work.  Long story short, when it appeared all was lost (in part my fault for a back-up disk that was full), the creator of Everweb himself took over the support on this problem and actually promised he would restore my project. It took just a day or so but he actually brought this project back from the dead. I thought I was a goner and would have to recreate most of the website. I was and am very impressed with both Everweb and their support. If you're skeptical as I was, they are worth looking into for sure.

Thanks!

Similar Messages

  • Hacked account - Support team link does not work

    i'm posting this on behalf of my parents, as they don't speak english but their account has been hacked.
    They received notifications that their password, and email was changed, which they definitely didn't do.
    I followed the steps on Password reset, and then i received a note that the answers i gave were OK, but then it's to provide more answers on a link. WHen i navigate to the link, i get an error message:
    Sorry, the page you requested is not available.
    THe same happens when i go from here to:
    Help - Privacy and security - What should I do if my account is suspended, hacked, or compromised?
    And there's also a link to contact Customer Support team, and its also broken: Customer Support team
    Since i had no other ways to report this, please let me know where can i REPORT the fact that my parents account has been hacked

    Hi, Fala, and welcome to the Community,
    I just tested the link you included in your first post, and it worked perfectly for me.   In your post, above, it appears you were diverted to the Microsoft help desk instead of the Skype Customer Support team  Your link directed me to the account verification form.  Please try this route instead to contact Skype Customer Service, starting with this link to contact Skype Customer Service via their secure portal: Contact Customer Service
    If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented.
    Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
    Last and not least, when you reach the last step of the process, remember to click on the "Start Chat" link when you are provided the choice of visiting the Community or starting an instant message chat with a customer service agent.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How to contact skype support team

    Dear skype support team,
    I was wondering if you could please remove the account   live:[Removed for privacy]   because I want to delete this account, but I can no longer log into it and I do now want multiple results popping up when people search for me.
    Thanks!!

    Hi, Sammie08, and welcome to the Community,
    Please review this information: 'Can I delete my Skype account?' and then contact Skype Customer Service to file your request as indicated in the article.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

    I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
    Pls inform me how can i resolve the problem of wifi.

    You have to go to autherized iPhone agent.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Hi Support team, somehow my mozilla settings have been changed and it baceme transprenet, now how to change back to normal ?

    Hi Support team, somehow my mozilla settings have been changed and it became transparent, now how to change back to normal because everything is transparent, menus, pages etc.

    This could be the same problem other users are reporting as a white screen or black screen, caused by an incompatibility between Firefox 33 and some older graphics card/chipset drivers.
    Please disable hardware acceleration as a temporary workaround. Step-by-step directions in this thread: https://support.mozilla.org/questions/1025438
    Does that work?

  • Hi support team, I'm using iphone4, After i upgraded my ios7 i'm facing issues.Need ur help

    Hi support team, I'm using iphone4, After i upgraded my ios7.0.2 i'm facing issues.
    - Unable to view the incoming calls.
    - mobile hanging

    This is not the "support team".  These are user to user forums.  You are not addresssing Apple's "support team" by posting here.
    Which of the troubhleshooting steps listed in the iOS 7 user guide have you tried?  Have you tried a reset?

  • Service Desk: Support team determination - Action Logs error

    Hello experts,
    I have customized the service desk functionality in Solman 7.0 EHP1 according to SAP help and the various (very helpful blogs from sdn). When I create a message from satelite system the "Support Team" field is already filled with the correct  business partner, but when I look into the ACTIONS tab I see the following error message (red light) "Find support team responsible, when message is created". In the processing log I have the following entries:
    "Processing CRM_DNO_PARTNER_1 Is Started"
    "Action could not be successfully executed".
    Additional no Email is sent to the BP SUpport team even I have customized it accourding to the blog from Tammy Powlas "Service Desk Support Team E-mail Notification".
    When I open the created message in change mode and save the message (without any changes), then the email is sent correctly.
    Can anyone give me a hint, what I did wrong.
    Thanks in advance,
    Thomas

    Hi Thomas,
    When the PDF is generated during the creation of the message, some information is not yet available to the smartform program, so most of the fields are not filled. In order to have the complete PDF, you have to send the e-mail after the document is completely created, which means using the processing time "Processing when saved" (and then you have to open the message and save), or via Job using the Processing time "Processing using selection report", and scheduling the job as mentioned by Cristiano. In this case no e-mail will be created immediately as you wish (I did not use "sent immediately" , but "created immediately", because it also depends on your SCOT job which will send the e-mail). In my case I did not need to send in the e-mail details such as System ID, SAP Component and System details to the Support team, only the message number, priority and description.
    If you decide to schedule the job, create a variant as explained by Cristiano. Enter the Application CRMD_ORDER, Action profile, Action definition if you want to specify which action or actions you want to execute (if you only want to schedule the job for your email to support team action, put this action definition here), Promotion status "0", keep empty field Processing type (do not put INT for e-mail), and select Processing Time "Processing using selection report". Keep dates in blank. Set  "Processing without dialog" on. It's very important that you configure your action to be executed via report, as I said in the beginning, otherwise the job will not work and you will have the "0 actions have been selected" message. Also schedule your job periodically with a very short interval if you have many messages created each hour. It also depends on your SCOT configuration. The CRM action job will only send the e-mails to the queue.
    The business partner assigned to the user that holds the position below the org unit should be entered in the message processor field, but this should not cause any error in the action that determines the Support Team business partner, as this field is correctly determined. Did you configure any other action or BADI to fulfill the message processor automatically? The standard SLFN0001_ADVANCED_FIND_PARTNER action as far as I know will not do it.  I have Solution Manager 7.0 with SP25 and I don't have any error message in the FIND_PARTNER action, it is all green.
    If you did not create yet any action or BADI implementation for the message processor, and if you have only one business partner (person) assigned to your support team, as you described (one Org Unit, with one position and one member), you can do the following:
    - Go to the Access Sequences definition and copy access sequence 0009 (organizational data: employee for an org. unit). In the Individual Accesses change the Source from Department to Support Team.
    - Go to the partner determination procedure and for the SLFN0004 select the access sequence just created.
    This access sequence uses Rule AC10000258 to determine the business partner Employee of an Org Unit.
    Try to create a new message and check if it works. This rule does not work if you have many members below one support team.
    You may also check SAP note [1041455|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1041455].
    Regards,
    Raquel
    Edited by: Raquel Cunha on Mar 3, 2011 4:30 PM

  • Service Desk - assign support team according to call status

    Dear SolMan Service Desk experts,
    We have copied the standard Service Desk transaction type to an own transaction type, and have adapted the transaction type and created a customer specific status profile.
    Now we want to find out how it is possible to assign a "support team" depending on the status. This means e.g.
    when the status is set from "In Process" to "Approved" a different support team "Basis" should be assigned automatically.
    when the status is set from "Approved" to "Escalated" a different support team "EscalationMgrs" should be assigned automatically.
    This is different to the usual and well know support team determination after call creation.
    Q: Is this possible with the PPF and the actions provided in standard?
    Q: What needs to be done to implement support team assignment by status?
    Q: Is there a description available to achieve the desired result?
    Unfortunately I did not find the needful in notes 616946 and 1512895, and also the PFAC rule 13200137 seems not to be helpful as the STATUS is not available in the Container, and as it seems once a support team is assigned the rule does not change the support team anymore. Is that correct?
    Best regards,
    Peter

    Hi Ram,
    here are the points to be done, when setting up the automatic support team determination in your Solution Manager system:
    You will have to set up your organizational model by using the transaction PPOMA_CRM. Make sure before, that in table T77S0 the value for HRALX HRAC is set to "X", otherwise no Business Partners will be assigned in your org structure!
    Then you will have to set up your finding rules by using the transaction PFAC, using the rule AC13200137. When ready, you can simulate rule checking if it is working. The determination is working by using the SAP component.
    To the different message numbers taken, when creating a new message: Depending on the way, how the message is created (through the Help-function or using the ta NOTIF_CREATE, resp. CRMD_ORDER) the sequence of creating the two parts of the message (a message in your SolMan system consists of a Basis/ABA-message and a CRM-message) is different. If you create a message via Help, the Basis-message is created first and the number range of the Basis messages defines the number for your message. On the other hand, if you create your message by using NOTIF_CREATE, the CRM-part is getting set up first, so the number range (to be maintained with the ta CRMC_NR_RA_SERVICE) for the CRM messages defines the number for your message.
    I hope this short explanation helps you,
    regards
    Csaba

  • Service Desk: Support Team Assignment from User not in a Support Team

    I am working on configuring the Service Desk and all has been going pretty well until now.
    The issue surrounds automatic assignment of Support Teams when a ticket is submitted.
    In cases where people assigned to the org structure (PPOMA_CRM) submits a ticket, the support team is assigned correctly (via Rule 13200137 in PFAC_RESPO), but when an end user submits a ticket, it doesn't assign a Support Team.
    I have not assigned end users to the org structure because they are not part of the support team and have been using PPOMA_CRM to only establish the support org structure.
    So the question is what am I missing to configure SolMan 7.0 so tickets from general users are assigned to the appropriate support team?
    Thank you,
    Brian

    Brian,
    It sounds like you did not maintain the identification tab with the ibase for the end users. You have to list every system a user can create tickets for on their identification tab in the General Partner role.
    It should look something like:
    <system ID> <identification number> <client> <userid>
    DEV 1234567890 100 BSMITH
    QAS 1234567890 100 BSMITH
    PRD 1234567890 300 BSMITH
    the very left field's value should be CRM001 for all three.
    You do not have to fill out the employee role for end users for the functionality you desire.
    regards,
    Jason

  • TS1538 Hi technical support Team of  Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately   

    Hi technical support Team of Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately    both phone stuck on recovery mode with error 1, and 3
    I got Error 3 on IPhone 5 and error 1 In IPhone 5s , I did lot of try as I can my level best , like Update iTunes, stop all security, change cable even change computer format my laptop and install everything fresh in window   I did try to with Mac of my friend,
    Change Internet connections try with DFU mode, Make DFU file Also with redsnow   everything I did
    Whatever on internet information like go to  cmd and run as administrator  to make change hosts file
    Like ipconfig/flushdns everything  everything  what I can….  but I dint get good results and  good information about this error
    Somebody told me this is hardware problem, I make change my battery and charging connector too.
    I don’t know what to do next.. because  I don’t leave any experiment on my stuck phone..
    Note : one  is big issue that apple support team  is also and giving good answer
    I am in Saudi Arabia so I don’t  have any nearest store of Apple.. even Saudi Is Big Consumer of IPhone
    Its Really Bad its big Loss of Money I can’t afford more , Now will not Buy Any IPhone  in future if I don’t get solution..
    Thank You..

    What the **** is this taht you will not provide any service due to just a bit jailbreak..
    we are not much tecnical person.. and mostly consumer dont have good idea about Jailbreak. make your device  much better secure from hacker and jailbreak please we cant afford much money please give me any solution i ll not do jailbreak again please  

  • I just bought a iTunes card and its not accepting it.  It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work.  How can I expedite this process?

    I just bought a iTunes card and its not accepting it.  It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work.  How can I expedite this process?

    Has it been 24 hours?
    I take it this was a gift card.  iTunes Store:  Invalid, Inactive, or Illegible codes http://support.apple.com/kb/TS1292 - gift cards
    I don't know if this provides an alternative means: https://expresslane.apple.com ; select 'iTunes' in the first column; 'iTunes Store' in the second column
    If you are really desperate you could buy the app yourself, then request reimbursement.

  • HT3702 Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account

    Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    Purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account

    Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account..

    Welcome to the user to User Technical Support Forum provided by Apple.
    For your issue.. Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT3702 I'm trying to open an iTunes account and was asked to provide one of each:credit card details or gift card details.i provided a gift card details and yet I'm being asked to contact the support team!!! Pls can someone help me out on this..thanx. Bre

    I'm trying to open an iTunes account and was asked to provide one of each:credit card details or gift card details.i provided a gift card details and yet I'm being asked to contact the support team!!! Pls can someone help me out on this as I cant enjoy my new iPad 3 without buying apps

    Brenda, the easiest way to contact the support team is thru the iTunes Customer Service website:
    http://www.apple.com/support/itunes/contact/

Maybe you are looking for

  • FGV003 - SYST: Period 000 is not valid in financial year variant K4

    Hello, I am getting the error below when trying to bring Period 000/2008 from our BCS cube into a basic cube.  I've run the "Transfer Global Settings" for our R/3 system but am still getting this error.  The BCS does have Period 000 Yr 2008 with FYV

  • Small issue in dialog program

    Hello all, i have a requirement in dialog programming. I have to modify a record a record which exist in zatble. For each record , i have a header info, item details. for header iam ok , i can use modify. for item details i have like itemno    materi

  • How do I add dates from a web page into iCal?

    Hello. I would love to find a way to input dates from a web page, into iCal as an event. Right now, if there is a conference or whatever that is on such and such a date, I have to keep the web page open that has the dates and time, and then open iCal

  • Username with privilege level 15 bypass enable

    Hi experts, I guess I never really understand the authentication process on Cisco routers and devices lol. Anyway I want users with privilege level 15 to be put in the enable mode right away after login without having to type in "enable" command and

  • Inheritance and private instance variables

    I've been reading a Java book. It says you should normally make your instance variables private and use getter/setter methods on them, but if you create a superclass, you have to make those variables public (or default?) to inherit them in the subcla