L20-181: RAM not correctly recognised

T L20 181 there is written in properties , I've got 256 mb ram ddr2, but when I check on computer it is shown only 190 mb ram. there is no chipset or graphic card which takes memory from computer in that model. so I'm interested if
I was cheated or it is right 190 mb ram. Next problem is that there is no disc with windows inside where can I turn to
find solution for that accident?
[Edited by: admin on 06-Nov-05 10:20]

Hi,
your information is not right. The ATI graphic card has 32MB memory and can additionally use up to 96MB system memory. So everything is OK with your machine.
Bye

Similar Messages

Equium A60: DVD-RAM not being recognised properly

Hiya!
I have a EA60 and my Mat****a DVD-RAM UJ-820S is being not being recognised by the Notebook properly. When I go into Device Drivers it says the driver has loaded but comes up error code 41. I've reloaded the Driver and the Device and this makes no difference.
I also bought a new Pioneer DVD-RAM and this comes up with the same error code.
Anyone out there can help me please?
[email protected]
Regards,
Gary

You could try this method, maybe it works:
Start Registry Editor
Locate the UpperFilters value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Locate the LowerFilters value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Quit Registry Editor and restart your system. Now windows should recognize your ODD correctly.

Added new RAM - now old RAM not recognised

I've seen several posts where people have had problems with new ram not being recognised, but my problem is this: Following advice from http://manuals.info.apple.com/en/MacProMemoryDIMMDIY.pdf and http://homepage.mac.com/tribe3/.Pictures/MemConfig.jpg, I added 2x1GB Crucial ram to my MacPro today. I put the new sticks on the top riser where the factory-fitted 2x512MB sticks were, and put the 512's in corresponding slots on bottom riser. Now System Profiler shows this:
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
DIMM Riser A/DIMM 3 & DIMM4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM Riser B/DIMM 1, DIMM 2, DIMM3 & DIMM4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Not sure how to proceed with this, and I don't enjoy the "thrill" of opening up the Mac so I'd welcome suggestions at this point. In particular, is it a good idea to zap the PRAM at this point? Is there any way of checking if Riser B is defective?
Thanks in anticipation
Jim

OK- I think I'll just go with it as it is for now. I'll have a chance at the weekend to hammer it with Photoshop and see how it copes. I ran Lightroom this afternoon, and it really was much faster than previous to the upgrade. I'll time its performance in PS with a Photomerge of 24-shots @ 10.1 megapixels each. If it copes with that, and I get the sort of performance boost I'd expect, I'll leave Memtest for now.
BTW - your statements "Memtest is a better choice" and " AHT is good for finding hardware compatibility issues and sometimes finds things (in 30 minutes) that no amount of Memtest would" seem to contradict. Or am I misunderstanding?
Thanks again for your help
Jim

790FX-GD70 not setting RAM to correct timing nor voltage from SPED

My 790FX-GD70 not setting RAM to correct timing nor voltage from SPED when set to auto. The RAM I have should be 6 6 6 20 @ 1.8V but the motherboard is setting it to 9 9 9 24 @ 1.5 V
The RAM is Crucial 2GB, Ballistix 240-pin DIMM, DDR3 PC3-10600 memory BL25664BA1336 • DDR3 PC3-10600 • 6-6-6-20 • Unbuffered • NON-ECC • DDR3-1333 • 1.8V • 256Meg x 64 of which i have two of then in the two black slots.
Just to rule out the RAM I also tried a different model of RAM whose timing is 7 7 7 24 @ 1.65 which will not allow to boot to windows unless I adjust the voltage manually to 1.70 (1.65 V will still not boot properly) it sets it also at 9 9 9 24 yet this same sticks of RAM will set correctly in a MSI 770 C45 without any adjustments.
Now i will say in the case of the 790FX-GD70 I require no changes in voltage for it to boot with the 1.8 V RAM just the timings are not as they should be. The 790FX-GD70 is stable as is and I will probably leave it at the auto settings but wondered if anyone else encountered similar issues with this board

Looks like this is a bit of an issue for some other users of your RAM and not necessarily a MSI thing! This user has a ASUS board! Good luck and hope you get it sorted out.
Backround:
I bought some DDR3-1333 ram that was advertised as 6-6-6-20 @ 1.8v and, as expected, running on my board's default 1.5v it was only getting like 9-9-9-24. In fact, @ stock voltage the best I could boot up with (unknown stability) was 9-7-7. In an attempt to get the best (advertised?) performance I went ahead and manually set the timings to 6-6-6-20, left all other timings on auto, and upped the voltage to 1.8v
Boots up fine and appears to be stable. However, I do notice the RAM is fairly warm to the touch whereas @ 1.5v it was pretty benign heat-wise. I tried running 1.785v but 3 out of 4 times it would hang on the windows desktop display. So I bumped it back up to 1.8v and I'll run Memtest 86 or something else later tonight.
My question, being a noob and all...
Is running at 1.8v going to hurt something? (See my setup MB, and CPU stats)
Just to repeat, the box and manufacturer do list it as 1.8v spec. (FYI: BL25664BA1336)

Samsung ram not recognised?

I have the later revision of the G4 aluminium with 1400x960 screen. Currently it has two 512 MB Samsung DDR2 sodimm modules in it. I replaced these with identical but larger modules (two 1GB Samsumg modules). I get either one or three beeps (no ram/not recognised) depending on the configurations I try. The new ram specs are:
Samsung 1GB PC5300 SO-DIMM Notebook Memory
M470T2864EH3-CE6 0839
Brand: Samsung
Memory Size: 1024MB DDR2
Memory Speed: 667MHz PC5300 200 pin
ECC-register: No
Memory Type: DDR2
CONDITION: Brand New
Any ideas? Thanks.

First off, I will say good choice on the Samsung, since they are OEM suppliers for Apple, and I only use their RAM in my machines. I find them completely compatible and never had problems. Now, as to why you are having a problem, that is odd. I do know that not all Samsung modules may be compatible... it has to do with the model number / part no.
The other reason you may have could be the lower RAM slot problem? Just a thought.
Second, people will tell you that you are using the wrong RAM and that it should be PC4200, but the PC5300 is known to work as well and is fully compatible so that is not the reason for the incompatibility. Crucial lists it on their website as compatible, and at one point, Apple had that part available as an upgrade option on their website (online store) for people who wanted to upgrade the RAM in their DLSD PowerBooks. I also confirmed this when I bought two sticks of PC5300 Samsung RAM pulled from a MacBook and sold by Other World Computing (www.macsales.com) in their clearance section and it worked like a charm in my PowerBook.
If I had the RAM on hand, I'd give you the exact part no., but I've since parted with my trusty 15-incher and upgraded to a unibody MacBook Pro. But me having a photographic memory of sorts (hey there's a pun there!), the part no. you have listed doesn't look familiar to me. Where did you get your RAM?

Since upgrading to Firefox 4.0 Norton IS site logins no longer work, even though they are running, they do not auto load. Is FF not being recognised after the update ?? ??

Normally when i open FF the Norton IS login manager kicks in automatically and completes all the various site logins.
'''However '''since the update to FF4, even though Norton IS 2011 is running the login manager is not working, it's as if FF4 is not being recognised as my browser any longer.
There must be a fix for this; if not i'll be forced to revert to the previous version of FF
New'ish system i3, Win 7, MS Office, Norton IS 2011, Firefox 4.0

You are almost correct in your assumption Norton needs updating to FF4
You can get Firefox 3.6.16 here:
http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

HT1459 my ipod touch 4th generation is completely locked out. its not being recognised in itunes for us to do a restore. how can we reset the ipod?

can anyone help with a completely locked down ipod touch 4th generation? its not being recognised in itunes!!!

Download RecBoot and see if that will kick it out of recovery mode.
Try doing a manual install following the instructions in the link below.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

My "iPod Classic (60GB) Click Wheel" is not being recognised in iTunes although the iPod shows up in 'my computer'.

My iPod Classic (60GB) Clickwheel is not being recognised in iTunes although the iPod shows in 'My Computer'. The problem started with an error message in iTunes saying "Could not complete sync as devise may have become corrupt" and suggested I restore the iPod to factory settings which I have done several times. I've carried out an error check in the iPod properties. I've completely removed iTunes and all related software components in the correct order and reinstalled version 10.5.3. I have been through the 5 R's numerous times but still the iPod is not being recognised in iTunes. I have Windows XP, I'm tearing my hair out now so any help or suggestions would be great

Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad

Time and Date not correct

Hi to all.
Does anybody know how to save your cmos settings to a floppy or CD?
Is there a program that can assist with saving the cmos settings to floppy or CD?
Is there anyway to perform saving the cmos settings within the BIOS to floppy or CD?
I really don't want to go into the BIOS and write down all that info.
I have an HP Pavilion 553w that is 7 1/2 years old, running windows xp home edition version 2002 sp3, 2 gbs of ram, AMD athlon(tm)XP 2100+ 1.73 GHZ, bios version/date Phoenix Techologies, LTD AM35308, 10/07/2002 (Phoenix-AwardBIOS CMOS Setup Utility) SMBIOS 2.3, BIOS Core Version V6.0, BIOS Revision 3.08 10/7/2002.
I know my computer is ancient and I probably should have updated my BIOS, as it is out of date.
Also, after starting up my computer I noticed my time and date is not correct and as of lately have to adjust the time and date to the correct time and date.
I did some research and came across some possible reasons:
1. RTC battery (CMOS battery) may need reseating on motherboard.
2. The battery has become corrupt.
3. BIOS version may be out of date.
My computer is really taking longer than usual to startup and images of icons take longer to display, which may be a sign of the symptoms I listed above.
My computer doesn't have any malware whatsoever, clean as can be.
Any help or advise will be truly appreciated.
Jboman
This question was solved.
View Solution.

Jboman,
There is not need to save CMOS settings unless you changed the default BIOS settings. A bad CMOS battery will not preserve the settings.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Isight not always recognised by Powerbook

Hi,
I'm new to apple and it's also my first laptop. I've bought an Isight, because it's fun to videochat, but my Powerbook doesn't always recognise my Isight! (System profiler -> Hardware -> Firewire) Sometimes it says Isight and sometimes it displays nothing! Same problem goes for Ichat...
How can I fix this?

Test your iSight to ensure it is functional.
If your iSight fails some of these tests, and if the suggestions in Apple's trouble shooting link there do not correct your problem, take your iSight to an Apple Service Technician for a professional check.
If you need more help, try the suggestions in Where to Find Help for iSight.
Being new to Apple and iSight, once you have an iSight that works reliably, you might find Using iSight helpful.

Are there any tips for freeing Working RAM (not Storage RAM)

I have an iPad 2 running iOS 6.1.3 and was wondering if there are any tips or tricks to use to free up working RAM, not storage RAM. By this I mean, I want to free up memory so that an app I have will run as it currently seems to be crashing due to low memory.
I have read that the following will help to free RAM for apps to run better. Can someone in the know let me know if this is really true or not?
1. Turn off Notifications
2. Turn off Location Services
3. Turn off Indexing in Spotlight
4. Turn off Multitask Gestures
5. Turn off Keyboard Auto Correct and Check Spelling
6. Turn off iCloud Syncing
And since I am asking, does anyone know if there are apps that somehow attach themselves to the iOS and use small amounts of RAM in the background even if the app is not actually running? Could I compare what I am asking to something like how Services work on a Windows PC?
Thanks to any and all who can enlighten me.
Dan

Are you having an issue with one specific app? It may help to shut down all background apps, then perform a device reset and try to run the app immediately after the reset. It certainly won't hurt to try.
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

PT880 Bios Setting Not Correct After Bios Flash

Hey guys. Flashed bios from 1.1 to beta 1.5 and am now experiencing this problem. I get the message Bios settings not correct. After loading defaults all I get is my monitor going in to "sleep" mode. The only way to get PC to post is to clear the CMOS jumper. I find it odd that my PC booted to Windows fine with 1.1 and now this problem. The reason I flashed to beta is because I have a 2.4a prescott and heard that the beta is more compatible. Any ideas?

Quote
Originally posted by rsix
I am running at 3.06 right now. Dont ask me what I did.. it just started accepting my OC changes in bios. The only thing I did was install core center and play a bit. After finding that it sucked I uninstalled it. Went into bios and upped my FSB in 5mhz increments. I also loaded optimized defaults first disabling the dynamic OC and the usual settings and changed vcore to 1.425. I still cant get past 3.06, when I try higher, the PC restarts when trying to load windows. Ive tried bumping vcore in increments to 1.5, Northbridge up two notches, AGP at 1.7, RAM at 1.75 all with no luck. I dont want to get too gready but as my temps idle at 40C I feel I have more room to work with. I am going to try and manually enter my mem timings if I can find them and see what happens.
Another thing I've found. When you change the FSB in the bios and it does not boot, wait a while and see what happens. For me about a minute later it finally rebooted and posted but the FSB setting went back to default. You may not have to clear cmos if you wait long enough.
Good point about letting it sit----and then it will finally reboot after about a minute----back to FSB 200---this worked for me a couple of times.
In Bios-----one of the tricks I did was to set the DDR to 466 and 500 and then see how that affected other bios settings----without going ahead and posting.
It showed me that it jumped up my voltages on AGP, VDIMM and Northbridge (and I think soutbridge as well)
Anyway----went back into bios and reset the DDR to 400----1:1----then raised all those voltages---then set my FSB up to about 230. That was really about the highest I could get with any stability. And that just doesn't cut it with a 2.4c which I've known to easily overclock to around 3.2 on an 875 or 865 board.
That's why I think a 3.0c is a good chip for this VERY inexpensive board. At 230 FSB You are doing 3.45 Mghtz which ain't too shappy
Best timings for me were Cas 2.5 4,4,8 and changing the Vlink settings really did nothing that I could tell for performance or stability.
Good Luck----let's us know how it turns out-----John

MSI 975X Power Up Edition and E6600 and DDR 800 MHZ Ram, NOT RIGHT SPEED.

I've just got my system up and running but it aint detecting the ram speed correctly or even the FSB on the CPU. I have included some pics to show you. sometimes at post it says 533, and sometimes 667. Any ideas?
I am running a E6600 and Crucial Ballistic DDR2 800 MHZ Memory.

Quote from: Maesus on 23-August-06, 01:00:49
MSI has an online Customer Service for you to send your issues or questions over. Usually it take few days to reply. This forum, is maintained by user, just like you and me. Happy users stay to help the unhappy users, and sharing experiences and valuable information. However, most if not all users don't make BIOS changes, modifying BIOS etc This is still mainly MSI's job.
The moderators have MSI contact where we can get faster response and more direct support. We do channel issues over here which we think is a true MSI issue. But 90% of the issue here are mainly user-setup problem. So we need to filter them out.
So, is this issue a MSI issue or a user-setup problem?
I just hope it will be fixed asap
I always loved msi motherboards because i never had problems. I don't like asus and the only motherboard available when i got my E6600 was the Asus P5N32-SLI SE Deluxe but the motherboard was bad (i hate asus even more now) so i could return it and change it for a msi motherboard The 975x powerd up edition And now (for the first time with msi) i have problems again. I just want my system to run like it should run

Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, Anurag

HI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

IPod not being recognised in iTunes

Hi all
I sold my iPod on eBay and, as far as I could tell, it was working perfectly when it was sent off. The buyer has sent it back to me claiming it wasn't being recognised in her iTunes and to my surprise it's now not being recognised in mine. I plug in the iPod and it charges through my Mac but does not become recognised in iTunes at all. Does anyone have any ideas as I am going to have to refund the buyer AND the iPod seems caput so it would be great if I could get it working one way or the other. Thanks so much in advance.

I tried what you suggested but it didn't seem to work for me. When i started the error check nothing happened, the bow for checking errors closed immideiatly after i clicked start. Did you do anythig else before checking the drive for errors, like put it in disk mode?

L20-181: RAM not correctly recognised

Similar Messages

Maybe you are looking for