TAXES NOT PICKED IN MIRO

Hi all,
THERE IS PO WTIH FOLLOWING SCENARIO
          Amount(inr)
PO    100 + 16.48 ( TAXES-EXCISE ) = 116.48
GR    100 + 12.00 ( TAXES-EXCISE ) = 112
while doing MIRO system should pick the taxes from MIGO.but it is picking from PO.
when we do MIRO with refrence to PO if taxes are overwritten in MIGO the values are picked from MIGO or J1IEX.

Hi manish
Maintain your tax code for MMIV in transaction OBZT.
Also check
Assign the tax code to the company code in the below path...
SPRO>Logistics General>Tax on Goods Movement>India->Basic Setting>Determination of Excise Duty>Condition Based Excise Determination>Assign tax code to company code.
After this run MIRO.
Vishal...
Reward if usefull

Similar Messages

Service Tax condition not picking during MIRO

Hi,
Referring earlier posted thread,
http://forums.sdn.sap.com/thread.jspa?threadID=2135441&tstart=0
I want to know insert a Tax Code - VAT for 10% and a Condition Type - Service Tax for 10.3%...
During MIRO, Service Tax Amount is not Picking... Why???
There is any solution for it.....

Hi,
If we create Service condition type, then why need to create Tax code in FTXP and maintain in FV11...
Why both things need to create...??
No need to maintain
check for your service tax condition type
Cond. class A Discount or
Calculat.type A percentage
Cond.category B Delivery co
and you have accrual tick for your condition in t-code M/06
also check in your pricing procedure you have assign account key and accrual key for your condition type in t-code
M/08
Regards
Kailas Ugale

Taxes not picked up in MIRO

Dear all
while doing MIRO, taxes not getting calculated (for a newly created tax code used in PO)and it is giving error like
Error in account determination: table T030K key JOST JP5 VF
Message no. FF709
Diagnosis
In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
Procedure
Contact your system administrator.
Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
To do this, choose Maintain entries (F5).
what might be the reason and please suggest the way

Dear
I checked every where (1.while creating tax code maintaining % against the concerned condition types, 2.in taxation TAXINJ procedure maintained every condition types, 3.in OB40 all G/L accounts maintained properly for the tax code
After all this,when i maintained this tax code in PO for the plant(DEPO PLANT excise masters maintained for the material and tax rate maintained) and during MIGO i maintained these conditon values manually and posted the document
when i do MIRO only tax amount for VAT 12.5% picked
what about excise,education,secondary and special duty
Please guide me

Excise and tax not calulating in MIRO

Hi ,
I have created on PO in which system showing exicse and VAT amount.
But while doing MIRO it is not showing any tax and exice even though i selected calculate tax option.
Regards,
Ravindra

HI,
Check your tax code appearing during MIRO. If it corrosponds to the excise & VAT then the taxes should appear on MIRO
Regards

Withholding tax not working for MIRO

Hi Sap Experts,
I am able to get TDS challans posted by J1inchln for Invoice postings done by Fb60 Transactions , However for the same vendor when I do Invoice postings through MIRO transactions I get mesage that " No unpaid tax lines exist for the given selection criteria"
Detailed look of error says under System Response that " For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation"
Also observed after posting that the accounting doc of MIRO has Business place & Section code present & shows Posting to Withholding tax accounts
But the MIRO invoice tab for Withholding tax shows With/tax Base & With/tax amount as blank. Could You please advise why this happens.
How this could be avoided?
What is the solution for this MIRO not getting Witholding tax?
I shall appreciate your resdponse by giving max points for a solution.
Warm regards
Marazban Dalal

thnks

Planed delivery cost- account is not picking in MIRO?

Hi,
Here in pricing procedure even though for the planned delivery costs condition type - account key and account is assigned in obyc & even then the relevant GL is not picking, instead only manual account assigned GL only picked up always kindly let me know the possible causes?
when I create a cost centre based PO with acct assignment category K, the GL which I am assigning in PO only picked up..
kindly let me know the possible causes for the same?
regards,
ARCHU

Hi,
1st one should know where & how account assigned PO will be used.If you used account assigned PO(lts say K), then during GR, you will have account entries
Consumption A/C :Dr
GR/IR Clearing A/C: Cr
During MIRO posting, the GR/IR Clearing A/C as accounting entries:
GR/IR Clearing A/C: Dr
Vendor A/C: Cr
Check the link how GL account for a material group is treated, when a purchase order is created with account assigned with material group and all assignment done in OBYC , OMQW & OME9.
http://www.bluemarlinsys.com/ns/0603-03.asp
Regards,
Biju K

Tax not calculating in MIRO

Hi ,
I have created on PO in which system showing exicse and VAT amount.
But while doing MIRO it is not showing any tax and exice even though i selected calculate tax option.
Regards,
Ravindra

Hi,
See the material document whether Tax code assigned or not in MIGO
if assign that untill and unless taxcode not appear in MIRO to book the entry.
Hope if it useful assign points
Regards,
Sankar

Excise taxes are not picking in MIRO

Hi,
Hello,
We are creating the Imorted PO with Tick of Gr based IV in PO.
And created the Inbound delivery for line item of the PO.
After this we were go for MIGO with ref to PO.
And created the MIGO.
We will pay the Customs duty later.. some special accounts head will pay him monthly.
my question is... In MIRO(layout is planned delivery cost) with ref to PO..... Qty and Amount field is blank.
For one line item of PO,,, we need to enter 7 conditions value in MIRo.... suppose if the PO is having the more than 10 line item. we need to enter 70 conditions..... it may make error....
we want that system should take the values automatically in MIRO
regards
sapman man

hi,
in import case u r verifing the invoice of customes before u make the GRN dtas why it is blank.
again
as currency rate keep on changing so it is not advisible to copy the PO value because that will not match to customs invoice.
u need to key in the values manually only.
u can develope one BDC for this if u require and entries are more.
regards,
sujit

Tax not calculating in MIRO within a date range.

Hi Experts ,
We have created a tax code and assign its values in condition types under two separate Key Combination.
1) Tax Classification : 4% ( Non Validity) , in access sequence exclusive indicator is set aganst it.
2) Tax Code : 4% (Valdity - Sept - till 9999), Exclusive indicator is not set against it.
Issue is that when i create a PO ( at any date) system is picking up the taxes.
Nom at the time of MIRO , if i post the MIRO before sept. system is allowing me to do so and calculate taxes correctly.
But when i change the date to Sept the system does not calculate taxes.
Even though the Tax Classification has more priority in access sequence compared to tax code , i am failed to understand why system is not calculating taxes.
I have tried deleting conditions in tax code key combinations but still system is not calculating taxes in MIRO,
Pls guide.
Regards
Honey

Hi Ramesh ,
i have done the same . Maintained he condition record via FV11. but system is not calculating tax for sept. month in MIRO.
In PO tax calculation is perfect but in MIRO it is not calculating tax.( ticked calculate tax option also).

Commitment item not picking while MIRO posting for Service entry sheet

Hi to all,
We have activated Fund Management in middle of the year where there were purchase order completed to till MIGO. When we do MIRO now system unable to pick commitment item from FMDERIVE.
We have created Commitment item as 50/3 combination ( No budget check ) and assigned to GR/IR clearing account.
We also activated trace in FMDERIVE and checked MIRO posting and found that derivation is working properly but while posting it is triggering error.
Some one advise me as it affected daily activities.
Thanks & Regards,
Y.Kiran Babu

Hi,
For the purchase order completed and the related MIGO created before FM was implemented, you need to run FMCN and FMCT.
I will explain to you in detail all the information related to the matter.
First of all, it seems to be in your PO that does not have FM account assignment (funds center and commitment item) in account assignment TAB. In addition, the error occurs usually also because in your SES the FM account assignment is missing.
For GR and IR documents FM always takes the major part of the FM account assignment from the PO.
You can fill these account assignments by using the programs RFFMCHAN/RFFMCHAT.
FMCN/FMCT must be run for the first document in the chain, which is the PO in case you don't have a PR assigned to this PO or an earmarked fund document. If you have PR's assigned to the PO's please run FMCN/FMCT for the PR first.
When executing the FMCT transaction, ALL documents selected in one group must be tested and processed successfully TOGETHER. If any one document fails, the ENTIRE group is shown as in error.
Therefore, first step is to ensure that the reference PO has a valid FM account assignment and is updated in FM. This should be done by FMCN/FMCT and subsequent posting with FMN4N (see reconstruction note 189761).
The SES itself might not be changed by FMCT. Therefore you should fulfill the FM account assignments in SES manually or with a custom program.
Please check also your table FM01X. As an alternative solution, you can enable one of these flags in table FM01X, depending on your business needs:
FLG_PO_PROTECT if you want to always inherit the fm account assignment from the reference PO and therefore skip FMDERIVE
FLG_FMDERIVE_FORCE if you always want to force a call to fmderive in all cases
FLG_SES_OVERWRITE in services, if you wish to overwrite the account assignment from the SES with the derived values from FMDERIVE.
You can find more information about it in text part of notes 1146677 and 923672.
FMDERIVE is skipped for GR/IR lines and the Commitment item is inherited from the PO regardless of whether or not the GR/IR line is FM relevant. This is SAP standard behavior.
If you want to force the Commitment item to be derived from the GL account for the GR/IR line, you can use the FLG_FMDERIVE_FORCE flag as described in note 923672. This will allow FMDERIVE to be called for these lines. Please be sure to fully test this to ensure that FM account assignments that you do not want to be overwritten are not incorrectly derived.
Bear in mind that for PO´s that does not have account assignment you should run FMCN/FMCT + FMN4N. For this you would need to check the flags and which one is more related to your needs. With the appropriate flag marked in FM01X (active with X) you should be able to run the transactions without any issue.
Based on note 189761, after doing all the previous suggestions and the issue does not appear anymore, I suggest you to run the following programs:
1) FMN0 for this PO/GR to see if the actual values are correct in FM table FMIFIIT (FM actual line items).
2) Run report RFFMRC04 (transaction FMAF). The reconstruction programs always update the totals records in Funds Management. Therefore, you do not normally need to reconstruct the totals records. However, if you suspect there are data inconsistencies in the totals records, you can analyze and correct these using the report RFFMRC04 (transaction FMAF).
If you correct the totals records, you must do this before you reconstruct the assigned values (see below).
3) Run reconstruction for AVC
You can also reconstruct the assigned values using the following tools:
    o Report BPINDX03 (transaction FMBV) for former budgeting
    o Report RFFMAVC_REINIT (transaction FMAVCREINIT) for the Budget
       Control System (BCS)
Make sure that no other system activities (postings, budgeting) are carried out during a reconstruction (commitment/actual or assigned values).
I believe that this resolve your inquiry.
Best Regards,
Vanessa.

Tax not calculated in MIRO for the condition type JVCD

Hi,
We made some new different tax code and attached with JVCD , its calculating in PO but in MIRO calculation part not done but for other condition type ,JVRD,JVRN system calculating well...
Please tell me some way why not system calculating in case of JVCD and JVCN for capital case..
Thanks in Advance,
Dharmveer

Hi,
We totally agreed with you and already we checked our configuration part is OK.Actually we want to map some process where we captured excise in GR but no need to take credit i.e. to post the excise in J1IEX,so we do not have to post our cenvat/modvat entry in MIRO but we need to calculate VAT whether it is deductible or non deductible.So far this thing is concerned,we made separate tax code which we use at time of MIRO posting and in configuration we did not attached the tax code in logitics-basic excise -assign to company code. Because once we attached here , system asking to make to pass furst RG part2 entry then it allows to post MIRO entry which we do not want .So please understand this scenario is different and we got the success for JVRN/JVRD for VAT but getting issue in case of capital VAT where system does not calculate tax for JVCN/JVCD .....where we want to process MIRO without posting J1IEX..
Please thing and analyse ..give some helping response..
Thanks,
Dharmveer

Withholding tax not calculating in MIRO and calculating in F-43

Hi,
Whenever I am positng invoice thru F-43, Calculating withholding tax amount and generating seperate line item for that.
But for same vendor after posting MM cycle( PO - GR -MIRO) and I am posting Invoice thru MIRO WHT line item not generating while simulating and also after posting.
Checks done :
1. In vendor master data Liable check box is ticked and Tax codes are properly maintained.
2. Minimun and maximum amounts checked.
3.Base amounts checked.
4. Formula for WHT checked
5. I feel if these setting are not good,it should not post in F-43 also. But it is posting in F-43.
Kinldy tell me any specific setting for calculating the WHT thru transaction MIRO
Thanks in advance

Shankar,
Thanks for reply.
If I don't put amount in the basic data tab( MIRO) then it does not allow to "simulate" or "Post". But here I can simulate and Post
I check every thing in WHT Config but I could't found the solution.
I want to tell another thing, we recently went to patch upgrade from Version 4.7 E SP 22 to 4.7 E SP30.
My question, Is the pacth upgrade affects in anyway???
If any suitable answer appreciatable.
Thanks once again for your reply.

Withholding Tax not picking for the current Fiscal year 2014

Dear Gurus,
Withholding tax assigned to the vendor is getting picked up for the fiscal year 2013 but when the same vendor is invoiced for year 2014 with the same WHT tax code we could see that there is no tax line getting generated against the Vendor. All the configurations related to WHT are verified. As far as i Know we will not maintain any end date for WHT tax code. request yout to advance.
Thanks in advance.
Thanks & Regards
Srikanth

hi,
Please check below mentioned Path - and check date from & to given period
SPRO- Financial Accounting (New) - Financial Accounting Global Settings (New) -Withholding Tax -Extended Withholding Tax - Company Code -Assign Withholding Tax Types to Company Codes
select WHT type against Company code -
W/tax obligated frm 01.04.2010 Oblig.to w/tax until 31.12.2999
and check vendor master data -
Thanking you
Regards
Mahesh

Taxes not capturing in miro

Dear All,
We have created one import PO. There are materials which are excisable .We have maintained the condition types H edu cess on CVD ,Addnl duty,IN basic customs ,IN CVD ,Edu cess on CVD ,Sec Edu cess on BCD,Ed cess on BCD in condition tab of purchase order. While I am trying to capture MIRO for the materials these taxes are coming for one material X .But for other materials Y,Z these taxes are not coming .
I have checked j1id where all these materials have chapter ID, tax indicator maintained is 3 .Excise rate maintained, are same for all the materials . Can any body let me know why taxes are not capturing for material Y and Z.

hi
please check this thread
SAP ERP - Logistics Materials Management (SAP MM)
and see the reply given by Hemalatha

TDS (tax) not deducted in MIRO

Hi,
I have config. LE-Transportation for my client.
Now my Freight costs and TDS (Service Tax) charges are coming in my Shipment Cost doc.
When i do the "Transfer" as usual the Automatic Service PO & Entry sheet are prepared.
But the problem is that the entry sheet is prepared of the value of only the freight costs and the taxes are not coming in that.
SO thus when i do a subsequent Miro its showing me only the freight amont for the forwerder..
EG: Freight in Shpmnt Cost is 4000 and TDS - serv tax is say minus 50..
thus the entry sheet is prepared onlly of value 4000..
and thus miro is for 4000 only..
Rgds

Hi,
you check Withholding Tax tab in MIRO, there are all necessary date are appering or Not.
Pls. give me the input.
Regards,
Spradip

TAXES NOT PICKED IN MIRO

Similar Messages

Maybe you are looking for