Label Name and MovieClip Help

Hello guys I am wondering if you help me. I'm a beginner at Flash and not sure if this can be done.
Basically. On my stage in have two MovieClips. MC_1 and MC_2. When i put the mouse over MC_1 I want it to play a 'label'
that is inside the MC_2 AND a label that is in MC_1. We can call the label name for MC_2 "lidopen" and the label name for MC_1 "stars."
Also if I take the mouse off, I want it to go back to normal, and if i click down I want it to play a new .swf file called "123.swf"
I hope you understand me, and thanks for your help in advanced =)

Here is some code that will go in the timeline that contains the two movieclips...
MC_1.onRollover = function(){
     MC_1.gotoAndPlay("stars");
     MC_2.gotoAndPlay("lidopen");
MC_1.onRollout = function(){
     MC_1.gotoAndStop(1);   // I assumed 1, so change if needed
     MC_2.gotoAndStop(1);
MC_1.onPress = function(){
     // do something with 123.swf
I am not clear on your intentions as far as playing 123.swf, so I haven't attempted to code that.  IF you are loading it into the same file, then you might use MovieClipLoader.loadClip or loadMovie, or if you are opening a new web page you would use getURL.

Similar Messages

  • What determines whether the Label name and/or Caption appears in the context help window but in other cases, both the label and caption appear in the context help window?

    I am trying to polish an application, and find that I cannot seem to reliably control which of the label or caption text appears in the context help window because I don't understand what rules are in place to determine which should appear. It seems like if I reate a named constant, then use it's right click menu command "Create Indicator" I get a control with only a Label (as long as I don't add a caption). This then appears in the context help window as the label name followed by the description text (after entering some description text). But if I add a caption, the label name is shown in bracket
    s which is a 'feature' I would like to avoid, because I have certain controls where I would like to use a descriptive variable name on the block diagram side without using so much space on the front panel. It seems like there is no way to avoid showing the Label name in the context help for a control/indicator. Is this true?
    I thought the purpose of having a seperate caption was to make the text that appears with a control programmatically controllable, but if that control is not extended to what appears in the context help window, it limits the usefulness of the caption and forces me to re-consider some Label names. However, the problem goes deeper than that because then even when I make the label and caption exactly the same, or if I delete (via a select caption text-backspace or select caption text- delete key .. sequence) the caption for a control, the label name in the context help window still appears in square brackets!
    Can I have complete control over the context help fo
    r a particular control (or has anyone found a third-party context help solution that functions compatibly with LabVIEW 7 in a built application that they will be so kind as to recommend?)
    I have used LabVIEW for three years, and I am now using LabVIEW 7.0.

    Sorry for that.. I was changing the text of my question and didn't read carefully enough in the preview stage. I wanted it to read "What determines whether the Label name and/or Caption appears in the context help window?"

  • Administrator name and password - HELP

    I cannot remember my administrator name and password, what should I do?

    Select Mac Help from the Finder's Help menu and search for "forget password."

  • E2500 name and password help

    My connection was very slow so I reset my device.  Now the wireless network name i created does not show up when I try to connect my computer to the internet.  The cisco network shows up, but when I click on it and try to go to a website it says I am not connected to the internet.  My warranty has expired so any help would be greatly appreciated.

    You can reconfigure the router's wireless settings. I suggest you give it a new network name (SSID) and change the channel. Try channels 6, 9, 11, or 1. Better try all the channels and choose the one that works best. Check this link.

  • Domain Name, Host Name and VPN help

    When I connect to my office VPN and try to ssh to one the machine I always have to put domain name, for example:
    ssh -X snorlax.xx.yy.com
    Recently my office changed their VPN settings and this started happening. Earlier I was able to just use snorlax instead of typing snorlax.xx.yy.com
    My mail client has also stopped working from home saying same thing: host cannot be resolved .
    I was reading online about domain name but I'm not too sure how does this work.
    Is it possible to append xx.yy.com before host name before resolving?
    Any help or suggestion would be appreciated.
    Thank you!
    Shivam

    You could also directly assign the IP to the hostname and skip the dns lookup if you add it to /etc/hosts.
    If you need more fine-grained control over hostname resolution you can use a local dns server like dnsmasq, bind (named), pdnsd, or unbound
    Last edited by progandy (2013-11-30 14:28:54)

  • Changing the label name

    Hi all,
    I am trying to change the label name and the text in text view, when i do the changes in development system its changing, but when i transport the changes to testing system the changes does not reflect, i tried resetting the OTR buffer, still it doesn't work for me.
    Help me in this.
    Thanks in advance.

    Hi Thomas,
    Yeah i do have a transport request, and the changes are captured by the request,
    it does not show any error in import log,
    but i solved it, i just deleted the label ui element and then created new, by doing this i got what i want,
    but i really dont know why its not changing when i change just the name.
    anyhow thankx for the mail.

  • Search through a cluster or clusters in cluster by label-name of a control

    Hi,
    is there a function availabe which allows to search through an arbitray cluster by an label-name and if the desired control is found in the cluster, its value should be returned?
    E.g:
    The function should receive the cluster to be searched and the label-name of the wanted control. The Output should be the value of the control if the label-name was found within the cluster. If the name was not found, there should be a status e.g. -1 at the output uf the function.
    Thanks for your help!
    BR

    I have two general purpose methods in this instance.  The first is to utilize LV's XML schema and a little XPath:
    The second method utilizes Traversal and is contained in the zip file I have attached.  This method is very poorly documented at best (like most scripting).  It was a fun experiment.
    TraverseCluster.vi specifies the callback VI to be used when a control is encountered during the operation called 'FindControls'.  It then calls this traverse operation on the cluster which is based in by reference.  The Callback VI is called for all controls in the cluster, if a Label is specified all matching controls are added to the list.  If no label is specified, all control references contained in the cluster are returned (including those inside subclusters).  You can specify if you only want controls returned and not the clusters. Finally, the Class Operator is removed. 
    There is an example included to see how it all works.
    Traversing is a great tool to have at your disposal if you are a scripter.
    Attachments:
    Traverse Cluster.zip ‏40 KB

  • Time Capsule won't accept my user name and password for access - Help!

    Hi all,
    My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
    When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
    I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
    Help! and Thanks.

    Norman & Harry,
    Consider the following:
    *_Time Capsule Keeps Asking Me For a Password_*
    It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
    It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
    You will find that by launching Airport Utility.
    Select the TC on the left.
    Click "Manual Setup".
    Click the "Time Capsule" Tab.
    You will see "Time Capsule Name:" and "Time Capsule Password".
    Make sure “Remember password in keychain" is checked.
    That is the information you need to enter when it asks for "username & password."
    *I Don’t Remember What My Time Capsule Password Is*
    You can see what your current TC password is by going into Keychain.
    Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
    Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
    To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
    Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
    Now the Password field will display the password you entered into Airport Utility for your Time Capsule
    *It Still Won’t Accept the TC Name and Password*
    Launch Airport Utility --> Manual Setup.
    Select "Disks" in the tool bar above.
    Click the "File Sharing" tab.
    Is "File Sharing" checked? It should be.
    What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
    If you have made any changes then click "Update".
    Let us know if this resolves your issue.
    Cheers!

  • Printing Company Name and Contact Name on Labels

    Does anyone know how to print BOTH the company name and contact name on the label in address book? I have read the "fixes" but they won't work for me .. I have a 10,000 person mailing list ... so I can't hand fix each one. Will this problem with address book be fixed in Leopard?
    THANK YOU FOR ANY AND ALL HELP IN THIS MATTER.

    Welcome to the discussions, Shadrach.
    I think the only way to do this is with a 3rd-party application such as Roll Call Directory, which reads the AB database but gives you greater flexibility in printing labels.
    AK

  • Help setting up back navigation button by label name.

    Newbie back for some gems of wisdom.
    I am trying to get forward and back buttons to advance the user along the timeline by label name. I got the forward button to work, but can't seem to find the right code tweakage to get the back button to work.
    Here is what I have:
    stop();
    var myLabels:Array = [ "A","B","C","D","E","F","G","H" ];
    var nextLabel:String;
    var inc:int = 1;
    var prevLabel:String;
    var inc2:int = -1;
    fwdbtn.addEventListener(MouseEvent.CLICK, clickNextSection);
    function clickNextSection(e:MouseEvent):void
        nextLabel = String(myLabels[inc]);
        gotoAndPlay(nextLabel);
        inc++;
    bkbtn.addEventListener(MouseEvent.CLICK, clickPreviousSection);
    function clickPreviousSection(e:MouseEvent):void
        prevLabel = String(myLabels[inc2]);
        gotoAndPlay(prevLabel);
        inc2++;
    I'm sure there are some reduncies and I know I'm missing the variable that tells the timeline to subtract positioning from the array.
    Do I need to define a new array for the back button?
    Any idea what I'm messing up??
    Thanks!!

    Thanks for the reply! Kind of lost unfortunately.
    So can you tell me how to edit the code to reflect that? Not sure how what the deincriment syntax and is and not sure how to set it up the way you are suggesting - only adding deincriment/increment on the fly.
    Any help you could lend to chopping the code would be appreciated.
    Love the logic you suggest. That would ideal for it to work from any point.
    Thanks for your help!

  • Help - Class name and descriptions for a function location.

    Hi Guys
    i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and  the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
    please help.
    many thanks.
    seelan.

    sadiepu1 wrote:
    When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
    Did you use facebook to log in? 
    Verizon will not be able to help you retrieve any of the information you need.  You will have to contact Zynga.

  • I can no longer use my aol on mac mail. When I set up the aol account name and password I get a message that says "Unable to verify account name or password". This is on all my Apple devices. Seems like an AOL server issue but no help from them!

    I can no longer make my AOL e mail work with Mac Mail on all my devices. When I try to set up the account and put in the correct aol account and password I get the message "Unable to verify account name or password". I know the account name and password is correct as I can open the AOL e mail page on Safari. I have changed the password, and it still does not work. AOL tech support has been no help. AOL email worked for years but last week due to suspected spam activity AOL locked my AOL account. I got that straightened out but now i cannot set it up on any of my devices: Macbook Air, Ipad, I pad mini and iPhone 6 without that message. I took everything to Apple store and everything is set up correctly on my devices. AOL tech support is no help and keeps giving me different solutions and answers, none of which has worked. Any solutions out there? All my Apple Software is up to date on all my devices

    Delete your Gmail account from the Mail/Contacts/Calendars settings page, and then add it back in using the new Gmail password.
    Matt

  • TS3297 I'm trying to buy a song and it won't let me it keeps telling me to ask these two questions like what was my first pets name and what was my childhood nickname and I forget I need help please

    I'm trying to buy a song and it won't let me a page keeps popping up telling me to answer these two questions like what was your first pets name and what was your childhood nickname and I forget the answers and it says I will be locked out of my apple id and I don't want that so can u please help me thanks

    If you didn't establish a rescue email address, you will need to call applecare support.  Ask for account security to reset your security questions.  After the advisor is able to verify your identity, they can reset your security questions.
    HTH.
    If you are in the US, the number is 800-275-2273

  • HELP! my mac has logged me out and now asking for a name and password?

    I was logged on shopping on top-shop online and suddenly the mac shut down.
    It seems it has reset its self! My icon has disappeared and its now asking  for a name and password.
    i have tried my log in but it is not working.
    Is there another way to reset the password?
    can i reset it to log back in what can i do?
    I have rebooted the computer several times but i dont know what to do!

    First, make sure caps lock is not on.
    Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination   command-space or command-option-space. See this support article.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

Maybe you are looking for