LabVIEW 2010 SP1 - When will it be available?

Any expected date of release?
Thank you
Dany
Dany Allard
Solved!
Go to Solution.

LOL I thought it was in beta and the post was sticky'd at the top.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Similar Messages

  • Application crashes in Windows 7 64bit made in Labview 2010 sp1 f2 with Fault module name%3A lvrt.dll%2C version 10.0.0.4033 and exception code c0000005

    I build an application exe and then its installer along with run time environment.
    The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash. 
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AGMS.exe
    Application Version: 1.3.0.0
    Application Timestamp: 4c24e8f5
    Fault Module Name: lvrt.dll
    Fault Module Version: 10.0.0.4033
    Fault Module Timestamp: 4c9273f4
    Exception Code: c0000005
    Exception Offset: 00005310
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
    Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: Dell System XPS L502X
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
    Memory: 8192MB RAM
    Available OS Memory: 8106MB RAM
    Page File: 3457MB used, 12753MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
    Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
    Language: English (Regional Setting: English)
    System Manufacturer: LENOVO
    System Model: HuronRiver Platform
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
    Memory: 4096MB RAM
    Available OS Memory: 4010MB RAM
    Page File: 1359MB used, 6658MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
    This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
    Now as I see it, it could be a Run-time environment mis-match error.
    For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
    I checked DEP, for all 3 PCs and it was set to the following
    Turn on DEP for essential Windows programs and services only (first option).
    I am confused. I can not find a solution for this and it is really frustrating.

    But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
    Since from the picture you can see its including the support installers from '\Program Files (x86)\'
    The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
    I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
    Yes I did reboot every time after I ran the installation.
    Still getting the same error.

  • Building App Gives Error 6 about 50 - 80 - 99% of the time. Windows7, LabVIEW 2010 SP1

    Hi
    First off here is a link to a discussion of the problem.  http://forums.ni.com/t5/LabVIEW/Error-6-occurred-when-building-an-Executable-in-Labview-2009/m-p/997...
    I have tried all the suggestions on this link with no luck.
    Background:   have been using LabVIEW 2010 without problems since Sept, then I started getting the error 6 with the following message.
    " Error 6 occurred at Delete in AB_Engine_Delete_Internal_Files.vi->AB_EXE.lvclass:Build.vi
    ->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller "
    This started on one project and is now occurring on another project.  Sometimes it builds 50% of the time, other times I can't get it to build at all.  I have upgraded to SP1, no change.
    Here are some things I have tried.
    Moved build directory to c:\a
    Renamed project, moved project right under c:\
    Disabled Google , disabled Win indexing, disabled Win7 user acct. Control, run LabVIEW as Admit all the time, win explorer closed
    mass compiling, closing the project, closing LabVIEW, re-booting
    Unistalled LabVIEW 2010 SP1 and re-install, twice.
    I believe I rebuilt my project in a new project.
    I moved my projects to a WinXP system laptop I have, and they never get Error 6 !  Short term fix, but I have to use Win7.  So I hope this means it is not my code.
    The funny thing is that this is totally random.  The unfunny thing is having to explain to a client I can't get my code to compile during a frustrating 95% of the time failure episode, yikes!
    Any help and suggestions would be welcome.
    BTW, the next step is to totally uninstall LabVIEW with a 'special' procedure and piece of code sent to me.  Don't want to, but am really at wits end.  Also waiting to hear back from my service ticket, but am desperate to have parallel solutions to try.
    Thanks
    Mark Ramsdale

    Thanks for the clarify.
    I also meant to post this link.  It has a lot of info, this is the link I tried most if not all of the suggestions for.
    http://forums.ni.com/t5/LabVIEW/Get-Error-6-about-50-of-time-when-building-Application/td-p/1242634
    By the way, I was told that uninstalling LabVIEW will not resolve the issue, dodged a time killer :-)
    It seems the error is caused by Win7 and file reserving.  Waiting to hear back on that.  Have an SR.
    Again, any suggestions welcomed, maybe some Win7 ideas from those who know more about it.
    mr
    Mark Ramsdale

  • LabVIEW 2010 SP1 may not cleanly shut down

    Occasionally LabVIEW 2010 SP1 (32-bit, running on Windows 7) will appear to "hang" when the "Getting Started" window is closed.  The window disappears but the shortcut icon still appears in the Windows toolbar in the bottom of the screen.  Right-clicking and selecting "Close Program" does not work and Windows seems to think any VIs that have been recently closed are still open.  The program is still in the list in Task Manager and it can successfully be shut down all the way from there.
    This is more of an annoyance than an operational issue (I think) - is there something I am doing (or failing to do) that causes this problem? 
    Thanks in advance.

    Hello Unplugnow,
    Deleting the .ini file will not cause any issues in terms of being able to reload Labview it will simply restore the default settings for Labview which will insure that there were be no data corruption issues. I have tried this procedure on my side with no issue although I would recommend copying the .ini file to another directory in case you need to recover this information at a later time. 
    To another note, does this issue arise when you are opening a particular VI, or does it occur when you are simply opening and closing Labview?
    Best,
    Blayne Kettlewell

  • Labview 2010 SP1 silent install

    Hello,
       I have a student version of Labview 2010 SP1. I have located an article on how to perform a silent install using v2008 (http://digital.ni.com/public.nsf/allkb/AA2371E815A418DD86257169005F2D99?OpenDocument). I was wondering if anyone had a 'spec file' or silent install file for 2010 SP1? If not has anyone tried creating a .MSI using WinInstall?
    We are trying to push it out using Group policy to one of our small teaching labs. I was going to create a startup batch to accomplish this.
    Thank you
    ZoeTaite

    OK...after some reading I see you can generate a 'spec file' that will help with the silent installation of the Labview 2010 SP1 software via group policy. Is there a way to to modify the nisuite.xml to automatically register the software? Like I mentioned we are pusing this out to a student lab and I don't want to provide the SN (even though it comes up when you launch it).
    ZT

  • LabVIEW 2010 SP1: "Controls" pop-up palette "Select a control..." bug?

    I'm using LabVIEW 2010 SP1 (32-bit) and I noticed today that I cannot place my custom controls on a VI's front panel when I use the "Select a Control..." option on the "Controls" pop-up palette. I'm wondering if anyone else is having this same problem?
    Steps to reproduce the problem:
    1) Create a custom control, or download/save the attached custom control "Machine State.ctl" (< a strictly-typed enum control).
    2) Open a VI (new or existing).
    2.1) If the "Controls" palette is visible (pinned open), close it.
    3) Right-click with the mouse on the VI's front panel window to display the "Controls" pop-up palette.
    Note: DO NOT use the "Controls" option in the "View" menu here.
    Note: DO NOT pin open the Controls pop-up palette at this point.
    See my comments below in the "Notes" section.
    4) "Controls" palette > "Select a Control..." option
    5) Using the "Select the Control to Open" dialog, browse to, select and open the custom control file (e.g., "Machine State.ctl").
    At this point the on-screen cursor should show the outline of an instance of the custom control I just opened, but for me that doesn't happen; all I see is the "+" crosshair cursor, and left-clicking with the mouse on the front panel does not place an instance of the custom control on the front panel.
    Notes:
    * In step 3) above, if I open the VI's "View" menu and select the "Controls" option, or if I pop-up the "Controls" palette and pin the palette to keep it open, I can successfully use the "Select a Control..." option to browse to, select, open, and place an instance of my custom control on the VI's front panel. The failure only occurs when I use the "Select a Control..." option on the pop-up (unpinned) version of the Controls palette.
    * I can successfully drag-and-drop an instance of a custom control onto a VI's front panel from a Windows Explorer window, or from the LabVIEW project explorer window.
    * The host computer is running Windows 7 Enterprise x64 w/ SP1.
    Jim
    Attachments:
    MachineState.ctl ‏5 KB

    Just now I tried creating and using controls on five different computers, each running Windows 7 Enterprise x64 w/ SP1.
    On three of the systems the problem did not occur; I was able to place a user-defined control on the front panel using the "Select a control..." option on the controls palette.
    On two of the systems the problem still occurs. Upon further investigation, however, I learned that the hard drives in these two systems were cloned from a "master" hard drive image the IT department created. So I'm guessing there's some bad mojo on the master hard drive image, and that's what's caused this problem to show up on these two systems (and others).
    So for now, I'm just going to put up with having to use the old "drag-and-drop" method for placing user-defined controls on the VIs. Thanks for your feedback and assistance with this.
    Jim

  • Labview 2010 SP1 - How to install just the labVIEW and remote panel

    Hi all
    I am currently using a licensed version of LabVIEW 2010 SP1. It came up with 6 to 7 DVD’s each of them containing around 5 GB of data. Installing all these stuffs eats up around 30 GB of ma C drive.
    My project just deals with 2 EPOS controllers controlling 2 of maxon EC motors and these 2 EPOS controllers are communicating via USB port with the client PC. This client PC have to be monitored and controlled remotely by host PC containing the same LabVIEW version.
    To do this, do I have to install all of these 7 DVD’s or just enough to download the “LabVIEW for education 2010 SP1” from the NI website, available in the below link “http://search.ni.com/nisearch/app/main/p/ap/tech/lang/en/pg/1/sn/n8:28,ssnavdl/”
    Awaiting for your reply  friends.
    Thanks in advance

    Duplicate Post

  • When will airplay be available for other iMac?

    My i7 2010 iMac can't run AirPlay yet.  When will this become available for the rest of us??

    when will airplay be available for other iMac?
    Probably never.
    Airplay mirroring is only available on these models:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    It will presumably become available on future Mac releases. For everyone else, there's the third-party, AirParrot.

  • Country/Region Availability. Creative Cloud is not available in my country (Barbados), what are my options? When will it become available here?

    I am trying to purchase/download Creative Cloud but it is not available in Barbados. What are my options? When will it become available here?

    Adobe Resellers http://adobedealreg.force.com/PartnerSearch?lang=en
    -http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

  • Iphone 5S 32gb gold seems out of stock everywhere, when will it be available again in Mumbai??

    Iphone 5S 32gb gold seems out of stock everywhere, when will it be available again in Mumbai??

    hey thanks Alan, I contacted istore and other good retailers in mumbai but they said they haven't received stock from Apple and cant tell when it will be available again....what can be done in this case??

  • Nokia N95 in TURKEY, when will it be available?

    Hello everyone;
    Many Nokia fans in Turkey are asking this question these days: When will N95 be available in Turkey? Nokia Turkey is not saying much about its release date.
    It Europe it was said the beginning of April and there you go! It was on sale in the beginning of April. But what about Turkey? When will be sold in here?
    Please Nokia Guys, help us!
    Thanks a Million!

    Yes we can buy from web, N95 is available in Turkey as grey market (imported without connection to Nokia Turkey). Yet, as Turkish customers we want to purchase N95 under official Nokia warranty, it is our right.

  • When will iPhone be available all over the world?

    It's really difficult for me to purchase iPhone from USA or UK where no relatives of mine live. Therefore I need to know when will it be available in countries like singapore, thailand, etc..so that I can purchase it easily...

    Singapore...released 9/21. Thailand...sometime in December 2012.

  • When will Siri be available in India?

    I'm currently in India and I was wandering when will Siri be available to give me directions here in India? I would really like to use it soon so apple please make it available in an update or something!! There's many of my friends that way this as well!!
    - nikhil

    When Apple announces it will be available.

  • Three way switch compaitable with labview 2010 SP1

    Hi,
    I am in need of three way switch  which is compaitable with  labview 2010 SP1.
    Plz help me ..
    thanks
    mahadev

    can u help me to upconvert the vi to LV2010. which manual are u talking abt?
    Attachments:
    3 position.llb ‏46 KB
    3switch.ctl ‏8 KB
    3switch.vi ‏16 KB

  • Its 12:25 pm 19th september 2012 pdt but ios 6 update is still not out can anyone tell me when will it be available

    its 12:25 pm 19th september 2012 pdt but ios 6 update is still not out can anyone tell me when will it be available 

    96aman96 wrote:
    its 12:25 pm 19th september 2012 pdt but ios 6 update is still not out can anyone tell me when will it be available 
    err, what planet are you posting from?  My clock says it is September 19, 2012, 7:16 AM PDT,

Maybe you are looking for