LabVIEW cannot recognize all functions in dll.....

The shared library contains 118 function(s). The declarations of 77 function(s) are found and recognized in the header file and these function(s) can be wrapped. The remaining function(s) cannot be wrapped. If you want to import these functions, please review the warning messages next to the functions below. You will need to fix the problems before you can continue with the wizard.

Do you have a question?

Similar Messages

[865PE/G Neo2 Series] Cannot recognize ALL my drives.......

Hi,
I have 5 Drives (3 HDs, 1 DVD Burner, and 1 Floppy drive). I have tried several combinations of Master/Slave and regardless how hard I try, I cannot get the BIOS to recognize more then 3 devices at any given time.....
Can you please tell me specifically ->
1) What order I should place them on the IDE/SATA ribbons (ie. Master/Slave Primary/Secondary etc.)
2) What jumper setting I should give each device.
3) And what BIOS settings I need to change (espcially regarding S-ATA/P-ATA Master 0 Slave 1 etc.)
Thank you very much.....
My Drives are these :
1) SATA HD (With OS on it)
2) IDE HD
3) IDE HD
4) IDE DVD Drive
5) Floppy

1. First are the Drives having problems showing up in the BIOS or the OS?
2. Connect the Floppy drive to the mother board using the Floppy Cable (the end of the FDD cable with the "Twist" should be connected to the FDD other end to the mother board)
3. Hook the SATA drive up to the Pri SATA connector.
4. Now you should have two more IDE HDDs. Hookup the Primary IDE HDD to the end of the IDE cable. (Jumper set to Master or Master w/Slave drive present). Hook the Secondary HDD to the middle connector on the same IDE as the Primary HDD (Jumper set to Slave). This IDE Cable is going to attached to the motherboard in the "Primary Channel"
5. Now you should be able to plug in the CDROM, to the IDE cable That is hooked to the "Secondary Channel" slot on the motherboard (jumper set to Cable select or Master w/o a slave drive present)
Now the biggest thing for you to look for is: Are you using a "80 pin conductor IDE Cable"? Those old IDE Cable from old PCs can case lots of problems, along with lagging you system down substantially.
See if that stuff helps you out and get back with us.
Heath

How to access Call Back Functions using *.dll in the Labview?

Hai,
I am Pavan Ram Kumar Somu.
I am new to Labview, currently I am working on MVB Interface.
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
    1. Pointer Arguments(To which memory it points in Labview)
    2. function pointers Arguments
    3 .pointers in structures and pointer structures in structures and many other data types.
Please Answer the below queries also:
1. How to pass pointer arguments to API functions in DLL and how to collect pointer
    return types from API functions in DLL
2. How to pass structure arguments to API functions in DLL and how to collect structure
    return types from API functions in DLL
3. How to use callback functions(nothing but function pointers) in Labview and how to
    collect callback fuctions return types from API functions in DLL
I need your help while passing these datatypes to API functions in DLL from labview.
Suggest me if there is any other alternative for implementing this task.
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
II) #include <windows.h>
     #include <process.h>
     HANDLE rcvEvent0, rcvEvent1;
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
With regards
Pavan Ramu Samu

"Somu" <[email protected]> wrote in message news:[email protected]...
Hai,
I am Pavan Ram Kumar Somu.
 
I am new to Labview, currently I am working on MVB Interface.
 
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
    1. Pointer Arguments(To which memory it points in Labview)
    2. function pointers Arguments
    3 .pointers in structures and pointer structures in structures and many other data types.
 
Please Answer the below queries also:
 
1. How to pass pointer arguments to API functions in DLL and how to collect pointer  
    return types from API functions in DLL
 
2. How to pass structure arguments to API functions in DLL and how to collect structure
    return types from API functions in DLL
 
3. How to use callback functions(nothing but function pointers) in Labview and how to
    collect callback fuctions return types from API functions in DLL
 
I need your help while passing these datatypes to API functions in DLL from labview.
 
Suggest me if there is any other alternative for implementing this task.
 
 
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
 
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
 
II) #include <windows.h>
     #include <process.h>
   
     HANDLE rcvEvent0, rcvEvent1;
 
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
 
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
 
With regardsPavan Ramu Samu
Search the forum (forums.ni.com) for callback, pointer or handle, and you'll find that it is all possible, but not very easy.
e.g.: http://forums.ni.com/ni/board/message?board.id=170&message.id=88974&requireLogin=False
Regards,
Wiebe.

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it.

My problem is- when I touch color picker all functions stop and I cannot do enything even exit.

My problem is- when I touch color picker all functions stop and I cannot do enything even exit.

What operating and version of photoshop are you using?
It sounds like the color picker dialog is opening off screen and that's why photoshop seems to lock up.
(you should be able to press the Esc key to dismiss the the hidden color picker dialog)
Do you have or had dual monitors?
Have you changed the screen resolution recently?
Anyway, resetting the photoshop preferences will probably gets things working again:
http://forums.adobe.com/thread/375776?tstart=0

I have lost all functions of the keyboard volume controls. i cannot find any controls for this. how

My HP Pavillion has lost all functions of the keyboard volume controls. Icannot find any controls for this. How do I go about getting
this reset?

Hi,
Try using Recovery Manager to reinstall your Audio Driver ( this will probably be IDT, but could be Realtek or Conexant ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Is it possible to convert a LabView .ldd Instrument Driver into a dll that can be used with MAX and visual basic?

I got the following problem. I'm using a Stanford DS360 UltraLow Destortion Function Generator, and would like to access it with the CwIVIFgen ActiveX Controll. In the driver database i found a instrument driver for LabView (ds360fg.llb). But its a llb file and i am not sure what to do.
Is it possible to convert it?
Is it possible to use it anyways?
Maybe i overread the answer, but i search the forums for quite a while now and i am not a bit wiser.
Thanks in advance
Felix

If you have LabVIEW and the application builder, a dll can be created from it but it cannot be used as an IVI driver. The only way to create an IVI instrument driver is with LabWindows/CVI. I personally don't have the time right now to create the dll but maybe if you post to the LabVIEW forum and get someone there to do it. Another other option is to hire an Alliance member to create either a dll from the LabVIEW code or to create an IVI driver from scratch.

Can't find DAQmx on All Function palettes

in the LabView 7 Express manual, it says that NI-DAQmx can be located by clicking on:
-Functions
-All Functions
-NI Measurements
-DAQmx
my question is, i don't even see All Functions and as a result cannot locate DAQmx. i've been trying to locate it on the Functions palette. i'm i looking in the wrong place?
thanks
-r

I'm not sure what might be happening. The All Functions palette is the bottome right palette on the Function Palette. If that isn't showing up then I'm not sure what is going on. You might need to reinstall LV. I have attatched a screenshot of where you can find the "All Functions" palette. If it isn't there send a screenshot of your functions palette and I might be able to figure out what is going on.
Attachments:
functions.JPG ‏34 KB

Cannot find NT Oracle Server DLL OCI.DLL

Hello
I am getting the following error when trying to execute a DS job from Designer in the error log.
"Cannot find NT Oracle Server DLL <OCI.DLL>. Please make sure that Oracle has been installed and the PATH variable points to the correct lib directories."
1. DS is on Windows
2. DS repo is sql server
3. Source is Oracle 10g db, target is Sql server db.
4. Oracle 32 bit full client is installed on the job server (10.2.0.1.0)
5. I have checked the SAP note 1295918 and I think it does not apply to the version of Oracle client we have and also it is already working in our SANDBOX environment, also our install location is NOT under the c:\program files\ folder
We are seeing this error only in our DEV DS box, we have a similar setup in the SANDBOX DS and that job executes successfully. I have compared the oracle client, DS and job server configurations between the 2 boxes and they are the same.
- SQLPLUS connection works from both the servers
- I am able to connect to the database and look at all the tables within DS designer from both the servers and import them into the DS repo
- No ORACLE_HOME was set when the installation was done. I created a ORACLE_HOME variable and assigned the install location, but still getting the same error
Any help is appreciated
Thanks
Dinesh

Dinesh,
When you added ORACLE_HOME to the environment, the environment settings were updated for the OS. However, the job server still had the old settings in memory. That is why you needed to restart the job server before DS would recognize ORACLE_HOME.

T420i cannot recognize a guitar

Hello.
I bought a Lenovo T420i recently and I'd like to play and record electric guitar through the laptop using Guitar Rig 5.
The problem is that the laptop has an integrated single input-output 3,5 mm jack. Whenever I plug the guitar straight into the computer using an adaptor to make the cable fit, the laptop cannot recognize my guitar. Even if it would, I couldn't use my external speakers anyway as there's only one female jack.
So I bought a splitter. At first I used a simple one that made me two females, but this worked only for the speakers, guitar was not recognized again. Now I have a splitter, that makes me one specific speaker jack and a specific microphone jack. The speakers work just fine, but the guitar is not recognized again if I connect the cables correctly. However, if I don't press the guitar cable all the way into the microphone jack, then the guitar is recognized, but as a result of a loose connection, the sound is really bad and there is very much unwanted noise.
Any ideas how to fix this? Do I really have to buy an external USB sound card or is there a cheaper way?

A bug for this issue was recently filed (Bug 1580428: java.lang.ArrayOutOfBoundsException: 0 when publishing objects with static functions without arguments). This bug is fixed in the next (9i) release of JPublisher, and the test you are providing actually works fine there.
There is no workaround at this point, other than either
(a) add a dummy argument to static non-arg methods, or
(b) do not generate any method wrappers at all by specifying the -methods=false setting.
(Considering that these methods are executed by converting the Java instance to a SQL value, sending that to the server, calling the method on the value there, yielding a new SQL value, returning that value to the client, and finally converting that back to a Java object, I am not so sure why anyone actually would want to invoke SQL object methods. As for static methods in general: it should be easy to write some SQLJ code (and slighly less easy in JDBC :) to call it and return the result.)
null

I pad 2 cannot recognize C6380 printer in network

C6380 all in one in wireless network - I Pad 2 cannot recognize printer

Yup, AirPrint (the built-in printing function in iOS 4) only prints to e-printers (listed here).
iPrint (free from HP) should be able to recognize it and maybe some other 3rd party printing apps, however you can only print limited kinds of document, photos, etc.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Error while creating database - Cannot load backend library 'oci.dll'

Hi all,
I am newbie to Timesten imdb (in memory database). I do not wish to use oracle rdbms.
I have installed the Timesten IMDB on Win2003.
E:\TimesTen\tt70_32\bin>ttVersion.exe
TimesTen Release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04-05T00:54:16Z
Instance admin: m4sadm
Instance home directory: e:\TimesTen\tt70_32
Daemon home directory: e:\TimesTen\tt70_32\srv\info
While installing, I followed the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
Now, I am planning to create a database, and so following the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
However, when I give the command (according to the viewlet), I get the following error:
Command> select * from v$version;
5102: Cannot load backend library 'oci.dll' for Cache Connect. OS error message '<empty>'.
The command failed.
Can anyone provide pointers to resolve this?

I'm guessing you chose No to the install question about using Cache Connect to Oracle? This would cause certain libraries not to be installed at install time, specifically libraries that would enable you to use TimesTen Cache Connect to cache data from Oracle tables.
The table "v$version" that you use in your select
select * from v$version
only exists on an Oracle RDBMS. It doesn't exist on TimesTen. Moreover the second viewlet you refer to is about using the TimesTen Cache Connect feature to cache tables from Oracle RDBMS. If you're not interested in using Oracle RDBMS, as you say, it would be my assumption that you're also not interested in using the TimesTen Cache Connect feature? So I'm a little confused here about your intentions. Are you interested in using TimesTen as a standalone datastore, or do you want to use it to cache data from tables located in an Oracle RDBMS?
Thanks.

Windows cannot recognize iPOD mini

I just bought a new iPOD mini (pink 4Gb), but when I conected the iPOD to my laptop and other desktop, the computer always shows 'cannot recognize the usb device, the divice might be malfunction', so iPOD shown as unknown device in my usb controller, when double click that, shows no driver suitable. I tryied all methods I can find from the website and none can resolve the problem, then I request repair service twice, but still didn't resolve the problem. When conected to computer, baterry shows charging normally, it seems the cable is right, and my computer meet all reqiures. Is anybody meet such questions? Could anyone give me kind help?

Yes, I tried 5Rs, different USBs, different computers, all doesn't work. I saw from one article about the format, then I check mine find the last item in 'setting-about' is 'model', not 'format: windows', so I thought might be because this, I download MacDrive, xPlay, they still doesn't work, then I tried MAC computer, after connected, it didn't show on the desktop, but I check the repair service results, all says found no problem.

Cannot recognize any internal hard drives, hard drives good

Hi,
My macbook pro 13" (bought in august 09) recently stopped being able to recognize its internal drive. I've run it through all sorts of diagnostic software, but none has been able to recognize it at all.
I've tried swapping out the hard drive to one that is brand new, but it still cannot recognize it. Everything is physically connected as it should be, and I'm running out of ideas for what to try.
I do not have easy access to an apple store to bring it in. If it is the only option, I could try to get it to one. Does anybody have any suggestions? Does this seem like a hardware problem that would need to be repaired?
Thank you,
Jack

Hi Jack,
It sounds like you have done a good job of troubleshooting. At this point we know you have a hardware issue. Fortunately you are still under the MacBook's hardware warranty, so Apple should repair it without cost to you.
Apple's retail stores are not the only source for service. Two other options available to you are 1) [Apple authorized service providers|http://solutionprofessionals.apple.com/aasp> and 2) call Apple (800-275-2273 in the USA) and set up mail in service.

Calling functions in dll

Dear all,
I'm facing an issue when a java program (ProgA) calls some functions in a dll, it works fine. But when I use another java program (ProgB) to call the method in ProgA that is calling the functions in dll, it prompts errors (please find the error message at the bottom of this mail). The following scripts are my programs. Please advise.
Can anyone experience the same situation? Please advise how to cope with external library? Should I miss any configuration?
Thanks in advance.
Clive
(ProgA)
package abc.web;
public class Sec_2 {
     // static constructor
     static {
          System.loadLibrary("des");
     public static native int DES_a(String lpszKey, int nMode);
     private static native int DES_b(String s1, String s2, int nAction, int lpnReturnSize);
     private static native void DES_c();
     public int enc2 (String lpszKey, int nMode,String encrypted_msg, int nAction, int lpnReturnSize) {
          int rtn_code = 0;
          rtn_code = DES_a(lpszKey, nMode);
          rtn_code = DES_b(e_msg, OutputMessage, nAction, lpnReturnSize);
          System.out.println("Encrypted string (inside) is "+ OutputMessage +" with return code "+rtn_code);
          DES_c();
          return lpnReturnSize;
     private static String OutputMessage;
     public void setOutputMessage(String s) {
          OutputMessage = s;
     public static String getOutputMessage() {
          return OutputMessage;
     public static void main(String [] argv) {
          int return_code = 0;
          int crypt_return_size = 0;
          enc2(s1, i1, s2, i2, i3);
(ProgB)
package xyz.pen;
import abc.web.Sec_2;
public class LoginOn extends JDialog{
     public CreateLoginDialog() {
          Sec_2 ddd = new Sec_2();
          Sec_2.enc2(a, b, c, d, e);
          System.out.println("Message "+ Sec_2.getOutputMessage());
library des.dll contains function DES_1, DES_2, and DES_3 with following definitions.
JNIEXPORT jint JNICALL Java_abc_web_Sec2_DES_1a(JNIEnv *, jclass, jstring, jint);
JNIEXPORT jint JNICALL Java_abc_web_Sec2_DES_1b(JNIEnv *, jclass, jstring, jstring, jint, jint);
JNIEXPORT void JNICALL Java_abc_web_Sec2_DES_1c(JNIEnv *, jclass);
If Sec_2.class is run solely, the program shows the result normally.
However, if we run LoginOn.class, the following error messages display.
ERROR MESSAGE
E:\>java xyz/pen/LoginOn
Exception in thread "main" java.lang.UnsatisfiedLinkError: DES_a
at xyz.pen.LoginOn.DES_a(Native Method)
at xyz.pen.LoginOn.<init>(LoginOn.java:247)

Hi
Make sure that the dll is visible to LoginOn
You can do so by adding the DLL directory to the Java runtime library path, i.e. pass -Djava.library.path=<dll dir>(alternatively, copy the DLL to Java program's working directory). If the Java code can't find the library, you will get a java.lang.UnsatisfiedLinkError
Hope this helps.

LabVIEW cannot recognize all functions in dll.....

Similar Messages

Maybe you are looking for