LabVIEW: Memory full

Hello guys, look I have this situation:
I was running a executable file (I don't have acces to the code) and this error appeared: LabVIEW: Memory is Full VI"Nameofmyvi.vi"was stopped at unknown""at call to"Nameofmyvi" I've read that its possible that this happens when we deal with large data set, at a possible solution is manipulating the code, but since I told you guys before: I don't have access to it.
So, I'll be very pleased if you guys can help me.
Cheers

As already said, the problem is likely with the code having poor memory management. Without the code, there's not much you can do.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

LabVIEW Memory full while fetching data from database

Hi,
In my program I need to sync some data from client PC as per the selected time frame.
But while fecthing the data from the clinet database, my application is hanging and when I run it with code I get the 'LabVIEW memory full' error message.
Kindly suggest to overcome this problem.

Fetching the entire database is probably not a good idea. You should narrow down how much you read at a time.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

If i load 1GB file in labview array, it shows memory full. How tom handle it?

if i load 1GB file in labview array, it shows memory full. How tom handle it?

Don't read it all at once. Just read the parts you need when you need it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Unexplainable MEMORY FULL error in 8.2

Alright, I finally got my client to take a look at LV 8.2 (we've been on LV 7.0 for 3 years).
So I have it running in Evaluation mode (we haven't purchased it yet).
I'm running in WinXP Pro/SP2 under Virtual PC 7.0 on a 2x2GHz G5 Power Mac.
The program works perfectly on LV 7, on a real Win2000 box, and on this Virtual PC setup.
The first time I try to run one of my programs in LV 8.2, I get this MEMORY FULL error.
It complains about the INITIALIZE ARRAY function. Notice that it's wired to the #SAMPLES control which is set to the highest I32 value possible (as a default condition). You might think that that's it - I'm trying to allocate 2+ gig of samples, and it just can't do it.
Here's the kicker:
The break point at INITIALIZE ARRAY did NOT get hit.
The break point at the CASE ouside of that did NOT get hit.
A break point at the CASE outside of that (not shown in this pic) did NOT get hit.
The FUNCTION control on the front panel is NOT set to INIT, but to "ShutDown", which SHOULD cause a different case to be executed.
A breakpoint at the parent's call to this VI DID get hit. But if I step IN from there, the first step stops at the WHILE loop, the next step hits the error.
This VI is not re-entrant, or any other weird setting.
In other words, it appears to be executing the wrong case.
This is my first try on LV 8.x, so maybe I'm missing something. Is it trying to be "helpful" and warn me about what it thinks are future problems?
Why is it executing the wrong case?
Message Edited by CoastalMaineBird on 11-16-2006 07:16 PM
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
Picture 2.png ‏101 KB

Alright - here's the bug - the stupidest thing I've ever seen from LabVIEW.
This library is in LV 7.0 - it works perfectly in LabVIEW 7.
But in LabVIEw 8.2, in SPITE of the fact that I call it with a function of SHUTDOWN, it insists on complaining about the code that I DON'T EXECUTE.
Run the BUG CALLER and see for yourself.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
LV82Bug.llb ‏22 KB

Application Memory Full - how do I stop this?

Running LabView 3.1 on a 386 machine. After several minutes of running get the following: "Application Memory Full: Saving and closing VIs can free memory. You may need to increase the Total Memory allocated to LabView from the Preferences Dialog." I gave it the entire 32 meg and still the same. What to look into? remeber it's an ancient 386!
tks
Randy Bates

Shift registers accumulating data with Build Array or Append String functions inside!
Bad calculation of For loop count with autoindexing output on foor loop boundery.
Or simply an autoindexing output on a while loop. The CPU may be slow but 32 MB is fast depleted in a loop when you create an array of double precision values.
PS: You should have also a math coprocessor 387 installed or things get a little difficult in LabVIEW.
Rolf K
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Signal Processing and LabVIEW Expert Full Time Position – London, UK

1x Signal Processing and LabVIEW Expert - Full Time Position – London, UK
1.0      Description:
As a Signal Processing/Software Engineer, you'll be part of a team that is responsible for developing applications based on large high speed data analysis for a large green energy project. Your skills must include a knowledge of Waveform analysis and understand the concepts of cross correlation, Fourier Analysis, Spectral analysis and other similar items.
The position ideally requires someone of CLA level of LabVIEW program to act as the project lead on the programming and technical levels of the system.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Understanding of the data acquisition side of the system and previous experience using National Instruments hardware and DAQmx
◦     Knowledge of Power engineering, Volts, Amps, current, Power Factor etc.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Ability to project manage and understand how to keep on track with a Microsoft project based externally monitored project.
3.0      Qualifications & Requirements:
◦     Minimum second class higher honours degree in engineering or science related field, such as electronic engineering, physics, mechatronics or computer science.
◦     Basic Knowledge of text based programming languages.
◦     Experience in either LabVIEW, minimum of three years full time and at CLA level, or capability to reach there in a short space of time with the relevant training.
◦     Experience in a second language such as JAVA, C and C++ is strongly preferred.
◦     Have a vast experience of signal processing, both digital and analog.
◦     Although not required, but must have skills to pass the Certified LabVIEW Developer exam and CLA within the year.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Knowledge in instrumentation & control, and industrial automation, is strongly preferred.
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a positive outlook on problem solving.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full valid UK driving license.
4.0      Location:
This role is located in London, UK
5.0      Reporting:
Signal Processing Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Signal Processing Engineer in the email subject.

Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation.

Error 2- memory full & error 10846 - buffer overwrite

I am running a multi threaded application on Labview 6.1 on Win2000 that involves continuous buffered data acquisition on a PCI-6130E and serial communication. I am sampling 15 channels at 600Hz. I currently have a buffer size of 1000 and am reading 60 points at a time. The serial communication involves sending commands to a pump from a queue. The queue is maintained at about 500 commands and does not increase over time.
I am plagued with two errors: the first is buffer overwrite error 10846. This occurs only when running the serial communication thread and DAQ thread simultaneously. I have tried reducing sampling rate, increasing buffer size, and increasing the number of points read at a time. The only effec
t seems to be to postpone the crash for about an hour.
The other error is error 2 - memory full. Labview seems to use gradually more and more memory over time and crashes after a few hours at about 110,000K.
I am not sure if these two problems are related in some way, as I have only gotten error 2 after receiving and ignoring error 10846. Sometimes the program runs for about an hour and then Labview exits by itself. I'm wondering if this memory error could be a result of my chart histories being too large or from some kind of accumulation due to using a queue.
If anyone has any suggestions on how to fix any of these errors, or on how to diagnose their cause, I would appreciate your help.

I suggest you concentrate on the memory leak.
There are many things that could cause this, some obivous others are very subtle.
Do the following and let us know what you find.
1) Reboot
2) Brinf up the task manager and check the performance before you start. Note memory usage and compare with the actual physical memory.
3) Run your app. Watch the memory usage.
Let us know what you find, and feel free to post your code.
I will not go into all of the things that can cause memory leaks because there have been many posting on this site on how to handle leaks, and I would only be scratching the surface.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

"memory full" error while saving. Can I recover VI?

While I was saving a VI, a "memory full" error is occurred. I tried to
save again and there was no other error. Now, when I try to open the
VI, the error dialog: "Labview load error code 16:Could not load data
space link information" appear. It seems that I lost all my work, but
there is a method to recovery the VI?
Thanks to all for any suggestion.
Max

"Only another question. My computer has 1GB RAM and I seen in windows task manager, after the memory problem, that LV used about 400MB of memory and there was still 300MB of free RAM(the other RAM was used by .othr programs).
Memory full is the erro returned if LV attempts to allocate memory and it can not. When allocating, the memory MUST BE CONTIGUOUS!
Warning: The following may change version to version and is based on my observations.
As i understand it, LV will enusre a buffer is larege enough to handle new data before the data is added. If the buffer needs expanded. LV will DOUBLE (Note: My understading, NOT known to be true) the size of the buffer. Under this scheme, if your buffer was 200MB and needed expanded, LV would have to acquire a block of 400MB from the OS.
Just my understading....
If someone knows better, please chime in.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

LG Ally text message memory full

I have had this phone for a little over a month now and I get the message "text memory full" all the time. I have 2 conversations open all the time and I clear them once a week. Other than that I don't have tons of messages. I looked online and it said to clear my cache. Well when I tried to do that it helped some but I deleted all my live backgrounds that came on the phone and that I use, and now I can't figure out how to get them back. I really like the phone but I'm tired of having to clear all of this stuff every so often. I have never had that with any phone and I don't get a warning to clear stuff before it happens. Does anyone have any suggestions????

I have given some steps below that may be helpful when getting the “text memory full” message.
Check your messaging options:
-Click the icon button (the one with the 32 little boxes’)
-Click on the messages icon
-Click your menu button (the hard key with the 4 vertical lines)
-Select settings
-Delete old messages (I would recommend checking this option, as it ensure the limit is not reached)
-Test message limit (change to desired number, the bigger the number, the better)
I would also recommend occasionally (as needed) deleting some of the threads as well.
-Click the icon button (the one with the 32 little boxes’)
-Click the messages icon
-Click menu button (the hard key with the 4 vertical lines)
-Select Delete Threads
I would also recommend checking the devices memory (I have listed those instructions below
-Click the icon button (the one with the 32 little boxes’)
-Click on the settings icon
-Click SD card & Phone Storage
-Available space should give you a number in MB’s (megabytes)
Lastly, I would recommend stopping any applications that don’t need to be running. For instructions click HERE.
Hope this helps!

Memory full.Not enough memory for operation.

To the Report Design Team,
It has been suggested that I post this issue here based on another thread I started: Re: Memory full.Not enough memory for operation.
The template contains a single 24 bit PNG image as a background in the Page Header section, plus 9 image records from a SQL Server image field over 3 pages (3 images per page). The images are all JPG at 3000x2000 (digital camera).
To summarize, we are experiencing three problems.
1. CR2008SP2 Designer issues a Memory Full error when Exporting to PDF.
2. Using a 3rd party PDF Printer (Bullzip PDF) and CR2008SP2 Designer generates a PDF, however, the CR2008SP2 API throws a "Memory full" exception suggesting Designer and API are different (see stack trace in linked message above).
3. With only 3 images on 1 page, CR2008 Designer Export to PDF takes 110 seconds to generate a 24MB PDF while our third party PDF Printer generates the same report in 17 seconds and 580KB.
Edited by: Don Williams on Sep 30, 2009 6:43 AM

The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM

Nokia C5-03 SIM memory full... but NO SIM MESSAGES...

Hello everyone. I'm sorry if this is in the wrong section, I'm new here.
Recently my C5-03 has a flashing envelope on the screen saying the SIM memory is full.
I searched on Google and found some topics saying to go to Messages -> SIM messages and delete them...
But problem is... no SIM messages appear! I'm desperate and can't find any other solution... what can I do?!
Solved!
Go to Solution.

Hi Hardstylehunt3r,
Thank you for your post and welcome to the Nokia discussion forums.
Sorry to hear about your issue but there certain steps you can try to resolve this issue.
Memory full messages may occur if there are too many applications running at the same time or if there is not enough free space in the phone memory. Depending on the error message, the following actions can be taken:
"Memory Full: Close some applications and try again"
In this case there are too many applications active at the same time. The problem can be fixed by closing some of the applications:
Long press the Menu key to see the list of active applications.
Select the applications which are not needed and close them.
If this doesn't help, switch off and restart the phone.
"Memory Full: Delete or remove some data from C: Phone memory"
The phone notifies you if the phone memory or memory card memory is getting low. There can be different error messages shown this situation, e.g.:
"Memory Full: Delete or remove some data from C: Phone memory"
"Disk Full : Automatic retrieval of mailbox for exchange disabled"
To free phone memory, transfer some data to the memory card with the File mgr application (select Menu > Applications > File mgr.). Select or mark files to be moved, select Options >Organise > Move to folder and then the destination folder.
In order to free memory, you could also remove or move the following:
Messages from Inbox, Drafts and Sent folders in Messaging.
Retrieved e-mail messages from the phone memory.
Saved Web pages. Clear the web browser cache to free some memory (select Options > Clear privacy data > Cache).
Saved images, videos, or sound files.
Contact information.
Calendar notes.
Downloaded application packages.
If there are applications which are not needed any more, uninstall them (select Menu > Settings > Data mgr. > App.mgr. > Installed apps.).
Any other data that you no longer need
If possible, use the memory card instead of phone memory in the Camera application (selectOptions > Settings > Memory in use to define the memory where the images are stored). You can also use Nokia Suite to transfer images and video clips to your PC.
If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first or Memory low. Delete some data, try deleting items one by one (starting from the smallest item).
Or you can try this:
To release the phone memory and change the email store from the phone memory to the memory card, follow the steps below.
Select Menu > Messaging and Options > Settings > Other.
Select Memory in use> Memory card.
To question Copy all messages to the new message memory?, select Yes.
To question Save original messages?, select No if you want to release the phone memory or select Yes if you wish to keep the original messages in the phone memory.
Alternatively you can sync your phone with Nokia suite and clear the messages that way if it is not showing on your device. Full instructions on how to sync can be found on the follwing link:
http://support.ovi.com/osc/en_GB/service/ovi_on_your_computer/howto/support-suite-syncing-and-backin...,
If this doesnt help you can try doing a soft reset by inputting code *#7780#. This wont delete any data but rather reset your phone settings. If the device ask for a default code this is usually 12345.
There's a lot to try to resolve here so give it a go and let me know if any helps.
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Nokia C5-03 Error: Memory full. Close some applica...

Hi,
I purchased this phone mainly to use for Navigation and phone, but disappointed by the error shows up every time when you are in need while using Map.
I do not have any extra applications running other than it came with. I have closed all the running application which running map. Phone software and Map is upto date with version (V22.0.007 and 2.45 on map) Earlier versions also same problem. Currently the available memory shows 27.2 MB)
I tried all the solutions given in /t5/Hardware-Codes-and-Operator/Nokia-C5-03-SIM-memory-full-but-NO-SIM-MESSAGES/m-p/1260683#M25236, but no use. Same error.
Is there any way out other than choosing another phone and brand?
Regards
Simon
Moderator's notes: Post moved into it's own thread.

I am completely frustrated with this phone (Nokia C5-03). I originally wanted a smartphone but didn't want to buy the brand leader like everyone else so I thought I could rely on a Nokia. I have had this phone for less than 12 months now and I have already done a full reset TWICE and have lost all of my information. On both occasions when the memory problems starting occurring with the phone I tried to back up my info to my PC but the phone told me that I had "not enough memory to perform operation"!!!! I am now getting memory full messages every 10 minutes and the phone will do nothing for me.
There is nothing left on the phone to delete. I had my email synched to the phone originally for about two weeks but had to get rid of it as it was slowing the phone down. I never connect to the internet with the phone - I mean NEVER. In browsing the web for solutions I am constantly finding varied and interesting comments about clearing the cache via the web app (I cannot connect to the web on the phone now - NOT ENOUGH MEMORY TO PERFORM OPERATION) and connecting my phone to a PC and browsing the memory to find out what the "other files" are (NOT ENOUGH MEMORY TO PERFORM OPERATION) or even downloading software onto the computer, running this in the background as I connect phone to PC in order to clear the memory (NOT ENOUGH MEMORY TO PERFORM OPERATION).
I reiterate that I use the phone for nothing other than SMS and calls. I had images on the phone but they are long gone. I have done two full resets to factory default settings and I'm facing another one and I am beyond frustrated. Please dont tell me to connect to my PC (see above) dont tell me to connect to web via phone (see above). My phone memory is showing 22MB SIS applications (which I understand I cannot get rid off) and 46MB other files (WHY????) I reiterate that I do not (and now cannot) browse the web on the phone, I don't use e-mail on the phone, all I do is sms and calls. WHY WHY WHY is my phone not working? Is there anything to be done with this phone or do I put it out of its misery?

Memory full error

I'm getting "memory full error" during generation of report. CR version is 8.5. The report contains 2 sub reports. Can anyone suggest what exactly the problem is and what could be the solution ... ??
Thanks in advance ...

And if you run the report int he Designer do you get the same error?
If not then what is the application doing when it gets the error?
What have you done to debug the issue?
Yes, getting the same error in designer also. My application is actually passing data to CR for some inventory related display. The report contains 3 sub reports linked with main report. I'm debugging all the sub reports as I doubt that it can be bcoz of one of the sub reports. Will check and update you ...

Why is my memory full when i have only used half of it?

Hi all, i have a 2012 MBA 120GB, i am new to mac books but have had all the other apple products for a long time.
my MBA is constantly telling me "memory full" and other messages like that. i have looked at "about this mac" and it displays i have 60gb of music, photos, apps etc, and the other 60gb is "other", and therer is no memory left.
i have deleted all of my emails in all boxes to see if this is it, and it isnt. i dont have any back ups, for our iphones and itunes at all, and i havent set up time machine either. i am at a total loss as to why this could be.
i have avoided using it latley because i cant put anymore photos or music on to it. the only thing that i have done to it since i have had it is install Mountain lion, and microsoft office for mac.
i have looked around for the answer to this and have come up with nothing, i'm no expert at all with a mac, i have looked at installing daisydisk or something like that, but i dont have enough memory to install it!! so if anyone has a step by step guide as to how to sort this out i would be REALLY grateful!!

anyone?

Memory full/video freeze - backup - Spiderman (!)

Hi
Read lots of these posts regarding memory full errors, so I am planning to upgrade the firmware. However when doing the backup, it's told me that it could not back-up copyright material (I am assuming this is the Spiderman vid that came with it) - Am I right in thinking that I will therefore loose Spiderman when I update the firmware?
The problem with memory manifests itself as follows:
Approximately 5GB free on the phone.
I have 660mb of music
When ever I download more than about 80MB of podcasts, the memory is full ...
I have also suffered from the video freeze problem - once you have a couple of vids on the phone, it will freeze for a couple of seconds. Whilsts other has said it is to do with the I/O speed of the mass memory, I don;t think it is - it is too intermittent. e.g. went to Coldplay gig. First vid - no skip (about 5 mins) 2nd & 3rd attempts to vid - froze after a couple of seconds - then managed 10 minutes straight off. No changes to settings..
Anyhow - if you can let me know about spiderman - is he a gonner on my phone when I update the firmware?
graham

Visit this link:
/discussions/board/message?board.id=smartphones&thread.id=120841&view=by_date_ascending&page=1
Throw some kudos, they mean a lot to us
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

LabVIEW: Memory full

Similar Messages

Maybe you are looking for