LabVIEW PDA gives error 12 when opening file

I can create a file with LabVIEW PDA with Pocket PC 2003, but when I try to open the file I always receive error 12 "Some system capacity necessary for operation is not enabled."
Can someone help me to solve this error ?
thanks in advance for your help.
Nico

On the PDA, File Open returns error 12 when you are trying to open a datalog file and the datalog type you specify on the funtion does not match the datalog type on the file header.
Regards,
miko

Similar Messages

Error occuring when opening file programatically?

I am trying to create a directory(ok) and then create a file from information obtained from a program(error). In this example i am calling the directory C:\TESTDATA\`serialnumber`\`type of test` and the file called `date``operator`.xls
However once the directory is created, an error occurs when i open the file to write my table into?
Can anyone help?
Thanks
Attachments:
test.llb ‏77 KB

Hi,
Can you do two things to help us help you? First, save your vi's using the "Save with options" selection "Development distribution", as some us don't have the OpenG libraries installed, and two, give us the error code/message you are getting.
Thanks
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Error message when opening file

When opening a client's file and I keep getting the error "Adobe Muse will now shutdown. Assert: BackgroundImage is not loaded?" ...can this be fixed or am I in trouble? This is a very important client and if I have to redo their website from scratch it will most certainly lose us the account.
It does not give me this error with any other file.

Can you send me a copy of your file at [email protected] and include a link to this thread? If it's too big for e-mail (>20 mb) you could use a service like SendThisFile, WeTransfer or Adobe SendNow.
Most of Adobe in North America is shutdown this week and I'll be away from my computer much of the day but will take a look at your file as soon as I can.

Error 7 when opening file running LabVIEW 2010 executable

I am using Open/Create/Replace File in LabVIEW 2010 to open a text file. This works fine until I compile the code. I then get Error 7. I have tried paths that look like the following but none work.
c:\<directory name>\file.txt
c:\<application name.exe>\file.txt
c:\<application.exe>\<directory name>\file.txt
Thanks
Solved!
Go to Solution.
Attachments:
read.vi ‏17 KB

You have to get the path to the folder of the .exe. Then strip off the .vi name and the .exe name. Then Build onto the path from there to get to your .txt file. The way you have it, you are treating the .exe as a folder rather than a file. The text file is not part of the .exe, so you can't create a path that includes the .exe name.
Why Does My Executable Not Work When Using the Current VI's Path Constant?

Errors thrown when opening files: "could not complete your request because of a program error"

I have a user on our network that recently had Photoshop CS5 reinstalled. Now when she opens .psd files she is notified to "Update the text layers" on the document. If you press "Update" the error "could not complete your request because of a program error" is thrown. If she clicks "no" then she can't properly edit the text layers on the files. I have reset her preferences files and run the font test script with no luck on either.

There is likely a font on that system that's corrupted or for some reason Photoshop just can't deal with. Fonts are complex things, and it's well known that bad fonts can crash applications.
Ferreting out such a font is normally a matter of removing all but the default fonts, seeing that the problem is corrected, then adding the fonts back in systematically until the offender is isolated. Yes, this can be tedious.
If it's not a font problem, there's a possibility it's a display driver problem. To help diagnose that, go into Edit - Preferences - Performance, disable OpenGL Drawing, then restart Photoshop. If the problem goes away, you'll want to check the web site of the maker of the video card for driver updates. Don't forget to re-enable OpenGL Drawing again after updating the driver.
Good luck.
-Noel

Aperture 3 gives error message when opening

My original iMac has been in the shop all week. Today they gave up and said they would replace it. The old one was 2 1/2 years old. It was a 24" 3.06/2GB/500GB/SD/512V.. the new one is 27" 3.20,2X2GB,1TB,5670/SD.
Looks like everything worked well when loading from Time Machine but Aperture 3.
Aperture can't open because of a problem.
Process: Aperture [915]
Path: /Applications/Aperture.app/Contents/MacOS/Aperture
Identifier: com.apple.Aperture
Version: ??? (???)
Build Info: Aperture-1310000~1
Code Type: X86-64 (Native)
Parent Process: launchd [386]
Date/Time: 2011-01-21 18:54:28.610 -0700
OS Version: Mac OS X 10.6.4 (10F2090)
I have the original upgrade Aperture 3 disk. I put in the serial number and then it asked for the Aperture 2 serial number.. I have the disk and the box but I don't see a serial number.
Is there a work around?
And everything was going fine with the new computer and time machine til now.
Steve Johnson

The serial number should either be on the box, in the manual or on a loose piece of paper with stickers for the serial number, if unable to find it visit the Pro Application Replacement Serial Numbers page;
http://support.apple.com/kb/HT1861
Tony

Error message when opening File Browse

I get this message "Error2: Photoshop is undefined. Line:1 - photoshop.invokeBridge (false, false)". Anyone know what the issue is here? THANKS in advance.

Can you send me a copy of your file at [email protected] and include a link to this thread? If it's too big for e-mail (>20 mb) you could use a service like SendThisFile, WeTransfer or Adobe SendNow.
Most of Adobe in North America is shutdown this week and I'll be away from my computer much of the day but will take a look at your file as soon as I can.

After removing virus from xp home. itunes gives error -50 when i try to open it

after removing virus from xp home. itunes gives error -50 when i try to open it.

Ah, the old jokes are still often the best ones, rIcHaRd ...
The -50 in that context can indicate damage to your Apple Application Support. (Apple Application Support is where single copies of program files used by multiple different Apple programs are stashed.) So I'd first try a repair install of your Apple Application Support.
Restart the PC. Head into your Add or Remove programs control, select "Apple Application Support", click "Change" and then click "Repair".
Does the repair install go through okay? If so, does your iTunes start launching again?

Error message when opening CS6 files in earlier versions

PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Hoping someone can throw some light on this.

This similar to the message one should get in an older version of photoshop such as photoshop 7.
If one presses ok instead of read composite that might preserve the layers with the original look.
But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
You said your using shape layers?
If they are shape layers you didn't use a stroke from the tool options bar?
Can you post an example of the image with the layers panel visible that you get that message with?
I guess your using photoshop cs6 with the 13.01 update?

Error message when opening adobe premier 10 saved film file , this file is not supported or required codec not installed

Hi
Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
Thanks
Colin65

Steve,
Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
Also please find details of storage devise,
Dogcam Portable Media Center PMC-500r
Quick DetailsModel Number:PMC-500R
SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co.,

Error in Cs3 extended when opening files.

hello Guys,
when I open a file i get the error
ADOBE Photoshop CS3 Extended:Photoshop.exe - teopassingsfout ( dutch for application error)
The pc is member of a domain. I installed the legal software on users account with administrative privileges.
Start the program without error untill opening a file.
Does anyone has a solution for that please?

Do you get an error when opening files from Bridge into Photoshop?
Does the same happen when you open Raw files with Camera Raw?

HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

What is the file?
Where did you get it from?
Allan

"The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812aeb" - error displayed when opening PDF files. What i do?

"The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812aeb" - error displayed when opening PDF files. What i do?

What is your Reader XI version?
Have you tried to disable Protected Mode [Edit | Preferences | Security (Enhanced)] ?

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009 ,NI DAQ 7.01 and Field Point 6.05.

I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

[Solved] error could not open file /var/lib/pacman/sync/core.db

I am trying to install Arch but when I type "pacstrap /mnt base base-devel" I keep on getting this error "error could not open file /var/lib/pacman/sync/core.db unrecognized archive format".
I have tried:
# rm -R /var/lib/pacman/sync/
# pacman -Syuf
I have also tried pacman -Syy with no luck.
What more is there to do besides installing ubuntu?
Last edited by johane (2012-08-11 08:22:07)

johane wrote:
I am trying to install Arch but when I type "pacstrap /mnt base base-devel" I keep on getting this error "error could not open file /var/lib/pacman/sync/core.db unrecognized archive format".
I have tried:
# rm -R /var/lib/pacman/sync/
Pacstrap was telling you it couldn't open a file, so you just deleted the entire directory tree? Did it appear to be downloading the database files correctly before this? Did you try running pacstrap again after you deleted everything?
And then you tried to run pacman with the -f (force) option? What happened? "no luck" doesn't tell us anything.
What more is there to do besides installing ubuntu?
There are many things you can do. You can give us more information about what you did and what happened. Did you follow all the steps in the Beginners Guide up to the pacstrap step? Did you get any errors or warnings before that step? Are you sure you had a working network connection? Did you interrupt the pacstrap process at any time? Did you try running it again after you deleted /var/lib/pacman/sync?
Did you check the sha1sum of the iso you downloaded before you put it on a usb stick?
https://wiki.archlinux.org/index.php/Be … oaded_file
How did you put it on the usb stick?
When you got the error, did you do
ls /var/lib/pacman/sync
to see what (if anything) was there?
Last edited by 2ManyDogs (2012-08-06 23:38:27)

LabVIEW PDA gives error 12 when opening file

Similar Messages

Maybe you are looking for