LabVIEW Scripting not showing up in NI License Manager

I have installed LV Scripting but can’t seem to activate it. It is not appearing in NI License Manger for some reason. I am using LV 2012. I have restarted both LV and the license manger without any luck. I am using a volume license for my normal development, don’t know if this is causing issues. Am I missing something obvious here?
Herrlin
Just trying to spread the LabVIEW love.
Solved!
Go to Solution.

This is my bad. Apparently you just need to enable VI Scripting from the tools->options menu under VI Server in LV 2012.
Herrlin
Just trying to spread the LabVIEW love.

Similar Messages

Sony z3 not showing up in google device manager

Sony z3 not showing up in google device manager
I have checked the mark under security....
same with my new sony z3 tablet.
Solved!
Go to Solution.

Strange thing. Are you willing to try the repair? Do it with PCC if you want to:
http://www.sonymobile.com/gb/tools/pc-companion/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Not show anythings in tab License Key in Central Management Console

Dear All !
I have a DVD SAP Business Objects Edge Standard XI 3.1 include
BOE Standard XI 3.1 and Add on Sap_Integration, PeopleSoft_Integration, JDE_Integration and EBS_Integration
I have a temporary License Key Code which downloaded on Sap Market Place
the frist, i install BOE Standard XI 3.1 with a temporary key and when process finish, I login Central Management Console through web Tomcat below
http://<IP of server>:8080/CmcApp
I choose tab License Keys and I see a temporary license key
and then, I install Sap_Integration with a temporary key and when process finish, I login CMC through web Tomcat above, I choose tab License Key but not show anythings, just a blank page
And now, i want to upgrade with a permanent license but i can't because i don't see anything in tab License Key
pictures here
http://upnhanh.sieuthinhanh.com/userimages/images/sieuthiNHANH201001191803ody0nwrhzd45210_1.jpeg
thank for your advice

replace licensekeycode current with file original

Itunes page does not show full page w/license agreement..nano does not work

plugged in nano to computer, license agreement comes up half page, can not click any responces. they r not there in view.Also no set up assintant appears as it said it would in the pathetic little " manual" that came with it. wonder if they burn well in the woodstove:).easy as 1,2,3??? can they count???

Hi Senthil, check these links for solutions:
http://stackoverflow.com/questions/5301659/sharepoint-2010-tag-profile-not-showing-all-tagged-items
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/cac5316b-9dcd-4cdd-a58f-199340ac03da/tag-profile-not-showing-any-items?forum=sharepointgenerallegacy
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/85dde626-edbb-4825-be1f-bcc51b9870ec/tagged-items-do-not-appear-in-tagprofile-?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/en-US/cac5316b-9dcd-4cdd-a58f-199340ac03da/tag-profile-not-showing-any-items?forum=sharepointgenerallegacy
http://sharepoint.stackexchange.com/questions/20633/tag-profile-search-is-not-working
cameron rautmann

Events script not showing up in designer

I am working on a form using ES4 version 11 and when I try to view the Javascript code for the events nothing shows up. I also cannot preview the form using the preview tab. It just hangs. When I quit and restart the form sometimes the script code shows up. Any idas what may be causing this?

Hi,
This does happen to me sometimes, I'm guess that sometimes when an exception is thrown in one of the early events then the preview fails and the only way to recover is to restart Designer.
Try going to the temp directory, just type "%temp%" (without the quotes in the Windows Explorer address bar), you should see a PDF file with a generated name something like, _12fk26d9o1adb71lh.pdf. This is the file Designer generates when trying to do a preview. Open this file in Acrobat (with the "When Exception is thrown" option set to break) and you should see what is causing the exception.
Good luck
Bruce

Scripts not showing up in console

Hi all
I have put my folder scripts in the correct location as far as I know but I can't get any scripts to show up.
See the screenshot below
Any Ideas?
Trevor

I hope this is the last one on this topic!
With a one line script I can use the consul easily but lets say I have something really complicated like the script below. Other than fitting it on one line how can I run it from the console?
for (var i = 0; i < 10; i++) {
console.println(i);
Ctrl Enter after the } throws the following error
SyntaxError: syntax error
1:Console:Exec
undefined
Sorry for asking such pathetically basic questions

Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

Hi Community,
I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment, we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
VMware machine running Windows Server 2008R2.
The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
Configuration
Supported?
Agent-less monitoring
No
After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
but it didn't matter how many times I try the servers never show up.
I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
--> http://technet.microsoft.com/en-us/library/hh212853.aspx
I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
I went to the Event Viewer and I found one particular event that caught my attention, see below :
Log Name:      Operations Manager
Source:        Health Service Modules
Date:          6/12/2014 12:48:19 PM
Event ID:      11551
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MyManagementServer
Description:
Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Health Service Modules" />
    <EventID Qualifiers="49152">11551</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
    <EventRecordID>1945680</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>MyManagementServer</Computer>
    <Security />
</System>
<EventData>
    <Data>MyManagementServe</Data>
    <Data>0x800706BA</Data>
    <Data>The RPC server is unavailable.</Data>
</EventData>
</Event>
Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
My main goal is to have all the servers showing up in the Operations Manager Console.
So thanks all in advance !
Oscar Loria

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Item not showing in Pick and Pack manager

Hello All,
One of the user added GRPO with 5 Items, but in Pick and Pack manager I can see only 4 Items from that GRPO.
Can anyone help to find out the cause for this.
Regards,
Hitul

Hello All,
Following is the screenshot of GRPO, SO and Pick and Pack manager.
Item no. 26105-003 is not showing in the Pick and Pack manager. all other items are there.
Regards,
Hitul

Third party Certificate not showing up in SQL configuration manager drop down box

Hi,
I have an SQL instance that needs to use a third party SSL certificate for all communications to that SQL instance. I have installed my third party certificate via MMC and it is showing under the Personal Folder.
However, when i go into the SQL configuration manager and right click the instance name > Properties > Certificates, it is not showing in the drop down box.
I am currently using MS SQL Server 2008 R2, which is installed on Windows Server 2012.

Hi,
If the certificate cannot be used for SQL Server and hence will not be visible in SQL Configuration manager. Check the validity of the installed certificate. It may not has the correct DNS name.
I suggest you request a new third party certificate from the vendor with the correct DNS name. Install it on SQL Server environment, then you should see certificate form the configuration manager dropdown box.
Thanks.
Tracy Cai
TechNet Community Support

PCs not showing in Collection/Queries Config Manager 2012 R2 - Direct Rule

Hello,
I have been creating some collections and queries using a direct rule or manual entry of the device and the PC is not showing in the collection.
Example: Created collection for a .NET 4.5.2 install that I rolled out. Manually added the devices that need the application and of the 40 PCs 2 or 3 will not appear in the collection, thus they are not getting the software push. The PCs
that are not showing up are pinging able and I can RDP into them just fine. Config Manager shows they have the Client, are active and getting policy requests.
I thought maybe it there was an issue with the collection I was creating but I tried adding the same PCs to other collections and they do not appear in those collections either.
I did a manual query as well with the same results, the same PCs I try to add to the collections are not showing in my query even though they are hard coded in.
Thanks
Rich

I deleted the collection for our "Insurance Department" which the suspect PCs were in. I no longer needed the Insurance collection so I deleted that just to see if that was limiting the .NET collection. Now those PCs are showing in
the ".NET 4.5.2" collection.
That is good and everything but going forward I will need to have a collection for the "Insurance Department" that will be based on a query that looks for our Insurance Application in Installed Applications64. How can I prevent this new collection
from limiting any PC in that collection from being put into other Software Install collections?
Thanks for the help thus far.

After Effects is not showing up on adobe application manager?

I recently got adobe creative cloud so that i could use Adobe's programs, especially After Effects. But when i downloaded the application manager Adobe After Effects does not show up on it. what should i do?

I looked through my system requirements and i didn't see anything wrong with them, they seemed to fit the description
Processor: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz 3.07 GHz
Installed memort (RAM): 4.00 GB (3.50 GB usable)
system type: 32-bit operating system

After loading, why does adobe flash not show up in add on manager - using firefox 5.0

Loaded adobe flash 10.3.181.34 and it worked fine. However, it does not show up in Firefox add-on manager - using Firefox version 5.0. Running win xp pro sp-3

shows up as shockwave not flash

Labels Not Showing Up Correctly in Workflow Manager Web Page

I have installed the Workflow Server 2.6.3 on Red Hat 7.2 against the Oracle 10g database. When I go to the Workflow Manager web page and login, all the labels appear between brackets "[]" and have incorrect names such as the following:
WF_WORKFLOW_TITLE
WFA_WTITLE
OPEN_NOTIFICATIONS
WFA_FINDTITLE
WFRTG_FIND_TITLE
etc......
I ran the Configuration Assistant again and this didn't solve the problem and I've also verified that the mappings in the server configuration file are correct for OA_JAVA, OA_DOC, OA_MEDIA. Looked through workflow installation log and no errors appear. I installed the web server (Oracle Apache Standalone downloaded from OTN in a separate Oracle Home). Any ideas how to fix these incorrect labels or why they're not showing up correctly??
Thanks in advance,
Rich

Hi,
I've not seen the problem myself, but it seems that the language has not created the correct lookups in the WF_RESOURCES table.
If you look for a name of (for example) 'OPEN_NOTIFICATIONS', there should be an entry for the language you are using (US) which translates the prompt for you. If it's not there then you will probably need to add a language through the installer - I don't think there is a SQL file that you can just run to do it. Alternatively, install it in a new environment and then just extract the resources you need from that system and insert them into this one.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Add table list does not show database view in Configuration Manager

Hi,
I am trying to add a database view in the table tab of the configuration manager. The view does not show up in the list of available tables in WCM 11.1.1.6 version. This is possible in the 11.1.1.4 version. Anyone else facing this issue?
Thanks
Soumya

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

Hi I am facing issue with Remote Desktop Licensing, it is not showing the original available licenses decreasing on the RD Licensing server

When i added our license servers to one of the clients for RDS, and we three log in, i am seeing issued shows three now but i am still not seeing the total license count decreasing as we have licenses on per Device basis and have 200 licenses for
our 2012 server. In review configuration, everything is green.
Why am i not seeing the decrease and why is there a built-in overuse option coming up and retail purchase count not going down?
i wanted to paste an image but it says:
Body text cannot contain images or links until we are able to verify your account.

Hi,
1. What version is your RDSH server? Is it 2012/2012 R2 or 2008 R2 or something else?
2. If your RDSH is 2012/2012 R2, have you set the licensing mode to Per Device in RDS Deployment Properties? In addition, is the RDSH server part of a collection?
3. If your RDSH is 2008 R2, did you set the licensing mode to Per Device in RD Session Host Configuration (tsconfig.msc) or via group policy?
4. If you could post a ling to the screenshot on one of the image sharing sites we could view it from there. If not it would be helpful if you could provide the precise name of the pool (you need to make the column wider in RD Licensing) that the RDS
CALs are being issued from as well as the precise name of the pool for your purchased RDS CALs. The count columns would be helpful as well.
5. In the Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Licensing log on your RD Licensing server there should be events when licenses are issued. Please provide the event id and precise text of these events.
Thanks.
-TP

LabVIEW Scripting not showing up in NI License Manager

Similar Messages

Maybe you are looking for