LabVIEW VI For CANopen SDO Segmented and BLOCK Transfer Write operation needed

Currently , i have VI which supports for upto 4 bytes write operation for CANopen SDO.
I need VI which supports for beyond 4 bytes ie. Segmented AND bLOCK trasnfer.
Please provide me.
Thanks in Advance.

Hi Nilya, 
Did you create a service request about this? The Industrial Communications for Canopen should support segmented SDO
Jesse Dennis
Design Engineer
Erdos Miller

Similar Messages

  • Any time I want to delete anything by dragging it to trash, my computer keeps on asking me for my password. And once I write my password, the document is deleted without actually going first to trash. How can I solve this?

    Hello there
    I need some help from you guys
    Any time I want to delete any thing by dragging to trash, my computer will ask me for my login password and once I write my password, the deleted document/file will not go to trash but it will be deleted instantly. How am I going to change this? Meaning drag documents/files to trash and than empty the trash. Can you help?
    Thanks
    Charles

    Normally, that's caused because of a permissions problem. Have a look at this site > http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919

  • Should we use LOGGING or NOLOGGING for table, lob segment, and indexes?

    We have some DML performance issue on cf contention over the tables that also include LOB segments. In this case, should we define LOGGING on tables, lob segments, and/or INDEXES?
    Based on the metalink note < Performance Degradation as a Result of 'enq: CF - contention' [ID 1072417.1]> It looks we need to turn on logging for at least table and lob segment. What about the indexes?
    Thanks!

    >
    These tables that have nologging are likely from the application team. Yes, we need to turn on the logging from nologging for tables and lob segments. What about the indexes?
    >
    Indexes only get modified when the underlying table is modified. When you need recovery you don't want to do things that can interfere with Oracle's ability to perform its normal recovery. For indexes there will never be loss of data that can't be recovered by rebuilding the index.
    But use of NOLOGGING means that NO RECOVERY is possible. For production objects you should ALWAYS use LOGGING. And even for those use cases where use of NOLOGGING is appropriate for a table (loading a large amount of data into a staging table) the indexes are typically dropped (or at least disabled) before the load and then rebuilt afterward. When they are rebuilt NOLOGGING is used during the rebuild. Normal index operations will be logged anyway so for these 'offline' staging tables the setting for the indexes doesn't really matter. Still, as a rule of thumb you only use NOLOGGING during the specific load (for a table) or rebuild (for an index) and then you would ALTER the setting to LOGGING again.
    This is from Tom Kyte in his AskTom blog from over 10 years ago and it still applies today.
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5280714813869
    >
    NO NO NO -- it does not make sense to leave objects in NOLOGGING mode in a production
    instance!!!! it should be used CAREFULLY, and only in close coordination with the guys
    responsible for doing backups -- every non-logged operation performed makes media
    recovery for that segment IMPOSSIBLE until you back it up.
    >
    Use of NOLOGGING is a special-case operation. It is mainly used in Datawarehouse (OLAP systems) data processing during truncate-and-load operations on staging tables. Those are background or even offline operations and the tables are NOT accessible by end users; they are work tables used to prepare the data that will be merged to the production tables.
    1. TRUNCATE a table
    2. load the table with data
    3. process the data in the table
    In those operations the table load is seldom backed up and rarely needs recovery. So use of NOLOGGING enhances the performance of the data load and the data can be recovered, if necessary, from the source it was loaded from to begin with.
    Use of NOLOGGING is rarely, if ever, used for OLTP systems since that data needs to be recovered.

  • Labview drivers for Keithley 181 nanovoltmeter and Lakeshore DR-91C temp controller

    Hi,
    I am looking for labview GPIB drivers for the following instruments.
    1. Keithley 181 nanovoltmeter
    2. Lakeshore DR-91C temperature controller
    I will greatly appreciate information about the above.
    Sincerely,
    A.V. Mahajan

    Hello,
    I just searched the web for both of these and was unable to find anything...I found a CVI driver for the Keithley 181 on the NI website, but I doubt it would be a simple conversion with the "Convert CVI Instrument Driver" utility in LabVIEW...it certainly wouldn't hurt to try, however. Anyway, I guess about the only option you have at this point is to contact the manufacturers of those devices and see if they have any un-published drivers...perhaps they're not supported, but it's better than nothing.
    Good luck in your search. Have a good day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Table for  the PO Date and Stock Transfer Order Date of a material no

    Hello Everyone!
    I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
    On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
    I am not getting the table through which I can get these two dates for a material.
    Please help me out.
    Its urgent.

    hi,
    see these tables:
         EKKO – Purchase Order Header Table
         EKPO – Purchase Order Item  Table
         EKBE – PO History table.
    reward if its useful

  • Specifying segments and block size manaually

    Hi, just a quick question,
    But could anyone help me understand why someone may manually add segments to a table space (or is it a data file they would be added to) ? does auto extend not take care of this?
    And secondly ... why would you increase or decrease the block size of a segment?... is this because you may have small or large sized rows within a table and want a block size to acompany this?
    Any help would be appriciated

    Hi,
    In Oracle free space can be managed automatically or manually,You specify automatic segment-space management when you create a locally managed tablespace
    Free space can be managed automatically inside database segments. The in-segment free/used space is tracked using bitmaps, as opposed to free lists. Automatic segment-space management offers the following benefits:
    -Ease of use
    -Better space utilization, especially for the objects with highly varying size rows
    -Better run-time adjustment to variations in concurrent access
    -Better multi-instance behavior in terms of performance/space utilization
    For manually managed tablespaces, two space management parameters, PCTFREE and PCTUSED, enable you to control the use of free space for inserts and updates to the rows in all the data blocks of a particular segment. Specify these parameters when you create or alter a table or cluster (which has its own data segment). You can also specify the storage parameter PCTFREE when creating or altering an index (which has its own index segment).
    see this link
    http://download.oracle.com/docs/cd/B10500_01/server.920/a96524/b_deprec.htm#634923 :)

  • Stored Procedure for Batch Number Format and Block Duplicate Batch Number

    Hi Experts !
    I am new one in forum asking question.. I want Stored procedure for Batch Number Format. I want fix one Batch number format in Stored Procedure.
    Example :
    My Batch number format Like  BATCH00001 - It should be first five digit is text format and next five is Numeric.
    IF create Goods receipt PO or Goods receipt stage I create batch number like BATCH 00001 or any other number means don't add that document and also duplicated batch number also does not allowed. please give me the solutions. I am sorry for my bad english .

    Dear Nagarajan K.
                         Thanks for your replay ..
    IF @transaction_type IN ('A','U') AND (@object_type = '106' )
    BEGIN
    set @item = LEFT( @list_of_cols_val_tab_del, CHARINDEX(CHAR(9),  @list_of_cols_val_tab_del,1) - 1)
    set @batch = substring(@list_of_cols_val_tab_del, len(@item)+1, (CHARINDEX(CHAR(9),  @list_of_cols_val_tab_del,len(@item)+2)) - (len(@item)+1))
    --set @base =( select basetype from ibt1 where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
    set @count = (select count(*) from oibt quantity > 0 and where  batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
    if @count > 1
    begin
    set @error = 1
    set @error_message = 'Please enter different Batch Code for batch ''' + @batch + ''' for item ' + @item 
    select @error, @error_message
    END
    END
                  I used above Stored Procedure. here we can use one batch number for different item but  i want to block one batch we should use one item and one time only after than we never use that batch number for same item and another item.
             After that I want format for Batch, we should follow unique Batch number for all items.

  • User exit for lower tolerance check and block of invoices

    Hi,
    Is there any user exits or ways to block invoices for their lower limits. Presently, for upper tolerance limits, the invoice is blocked, but for lower tolerance limit only a warning message is displayed.
    Regards,
    Arun Mohan

    Hi,
    I have the similar problem.
    Did you find solution?
    Best regards.

  • Were do I get the settings for call forward, wait and block

    I've look through my phone read the manual but still I can't find it. I've even done a search for it but still can't find it on the phone. If any body can assist on were to find these settings for a blackberry tourch 9850 Os 7.1
    Solved!
    Go to Solution.

    Try this:
    http://docs.blackberry.com/en/smartphone_users/deliverables/38346/Add_change_delete_call_forwarding_...
    It explained it well enough to me that it may be helpful to you.

  • What's a good karaoke program/app for the iPhone, iPad and Macbook Pro. I need lyrics and tempo shown.

    What's a good karaoke program so I can practice at home ? I need the lyrics and tempo shown like a professional setup for the pc windows lline and the app should be similar throught IOS platforms and Mac.

    You'll need an adapter cable, and which one you need depends on what version MBP you have and the inputs on the monitor.
    I just recently purchased a Dell U2410 to use as a second display with my iMac. Overall I'm pretty happy with but my use is a little different, I wanted something with very good color accuracy for photo work.  Based on what you said your needs are, you probably don't have to spend as much. 
    One thing I will say, is this particular monitor (and I believe all Dells) has an antiglare screen on it, which to be honest, took me a little getting used to.  Because of the matte surface, text and documents aren't quite as sharp and can even look a little hazy at times.  For your uses  you may be better off with a glossy screen as long as glare isn't going to be too much an issue for you.
    BenQ makes some pretty nice and affordable monitors these days LED backlit or otherwise, and on that note, theres absolutely nothing at all wrong with non "LED" monitors, both technologies are still using an LCD panel for the display, they just deal with the backlighting differently.
    As the other poster mentioned, NEC is always a good option as well.  Less common on the consumer side, but they make very good professional products.

  • Subcontracting for Sales Order Stock and collective Transfer Posting

    Dear Expert,
    We have a scenario in subcontracting wherein the sales order the customer also wants to see the components and as such along with the Header item of subcontracting ,we also mention the components as another line item in the sane Sales Order.
    Now from the sale sorder two Po's are created onr for the subcontractor and one for the compnens to be procured.
    Since the components are procured on sales order stock there is noway we can issue it to the Vendor stock through Movt .Type 541.
    As per SAP AG WE CAN:
    "ubcontracting is also possible in conjunction with sales order stocks and project stocks. The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the u201Cstock of material provided to vendoru201D but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt. The material manufactured is also posted to the sales order stock or to the project stock. The cost of subcontracting is then debited to the sales order or WBS element.Since the components are not transferred to the u201Cstock of material provided to vendoru201D, we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor.This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks."
    But my query is that how many such storage locations will be created for the subcontracting vendors.
    Secondly for the stock transfer from sales to storage location , we have lots of sales order, is dera way through which we can do bulk transfer rathar than clicking at new item everytime and then doing the transfer posting.
    your expert advice shallbe helpful in resolving a longtime pending issue , waiting for the response.
    Regards
    Jabeen

    This is a known issue, the system doesnt allow stock to have two special stock statuses at the same time.
    Your concern of having to make multiple storage locations is valid (since this is a configuration).
    I suggest you do the following
    - Configure a warehouse and a single storage type (say 001). Allow mixing of materials in a single bin
    - Assign this warehouse to a new storage location.
    - Create a bin for every sales order number in the warehouse.
    - When goods are moved to subcontractor, perform a transfer posting to the storage location, and perform a putaway to the respective bin. The putaway strategy can be tweaked using a user exit to go to the relevant bin. This way you do not have to enter the WM transaction for putaway.
    - To consume the stocks, you can use 231E movement (MB1A). On the WM side, the picking strategy can be enhanced so that the picking TO is generated with the correct source bin. Make sure the GL account and CO objects are as per FICO requirements.
    This way you can track the stocks binwise (bin level reports are available in WM), perform physical inventory and also consume the stocks from the relevant bin automatically.
    We had faced the same situation, and we ended up not having sales order stock at all.
    Hope this helps.
    Regards,
    Aroop

  • I have a referbished iPad2 can I exchange it for a new one and finish paying what I need for a newer model

    Can I exchange my referbished ipad2 and get a newer model and pay whatever it is I have to?

    How to Sell Your Old iPad
    http://tinyurl.com/85d69lk
     Cheers, Tom

  • Visual C/C++ code/Labview code for interfacing NI Hardware

    Hi,
     i need Visual C/C++ code/Labview code for interfacing NI Hardware and sample project example.

    Duplicate - http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Visual-C-C-code-Labview-code-for-interfacing-...
    You are just spamming now.

  • Need help with Labview code for DAQmx

    I'm currently trying to write Labview code for some thesis research and am having problems.  I'm using the cDAQ 9172 with strain gage modules and two voltage input modules.  I'll be reading/recording a voltage from an external source on one channel, while recording strains and accelerations with the other channels.  I need to do all this simultaneously.
    Everything I've done to this point has been in SignalExpress so I'm not sure how to program any of this.  I also need to be able to calibrate the strain gages prior to each set of recordings.  Any help you guys could offer would be greatly appreciated.  Thanks.

    Hi,
    I'm not sure how much this will help you, but I've attached a screen dump of code from a project I did that sounds pretty similar to what you're working on. The code is from a subVI that I used to create the daqMX measurement task for my data acquisition. I was also using a 9172. This was written in 8.5, but the only thing that you may not have access to is the functions for null offset and shunt cal of the strain gage channels. Hopefully this will at least get you started on your way to setting this up.
    Andrew Carollo
    Attachments:
    create task.jpg ‏208 KB

  • Inpect and block outgoing emails.

    Hello, I am new in Exchange Server Development. My task is to create TransportAgent that can inspect and sometimes block outgoing emails. It is important for me to inspect and block internal emails too(not only emails going out of organization). I need to
    support Exchange 2010, 2013.
    Thanks in advance,
    Vitaly

    As others have mentioned probably what you want can be done via Transport Rules.
    However if you have some form of content that can't be caught with Rules and you want to use a Transport Agent then.
    >> It is important for me to inspect and block internal emails too(not only emails going out of organization). I need to support Exchange 2010, 2013.
      Then using a routing agent
    http://msdn.microsoft.com/en-us/library/office/aa563310(v=exchg.150).aspx (the OnSubmittedMessage is probably the most appropriate) and
    http://msdn.microsoft.com/en-us/library/office/aa579261(v=exchg.150).aspx#Namespaces is the way to go as this will catch both Internal and External email. If you want to write one agent that will work on both 2010 and 2013 then you want compile with the
    2010 binaries and then use the
    http://technet.microsoft.com/en-us/library/jj591524(v=exchg.150).aspx on 2013 (or just compile a different version for 2010 and 2013).
    Cheers
    Glen

Maybe you are looking for