LaCie 1TB external hard drive can not connect to E4200

I have my LaCie 1TB external hard drive plugged into the USB-port of the Linksys E4200 so I can access that drive wireless.
However, in my disk management (via Cisco Connect), it does not show under Storage > Disk.
How can I solve this so I can access this hard drive from any computer in the network?
The drive is formatted in NTFS.
Thanks

Connect the hard drive directly to the computer and make sure that your computer can detect the hard drive.
If it is detected and working properly on your computer then connect the hard drive the USB port on the router.
Follow this link to setup storage device connected to E3000 router.

Similar Messages

WD 1TB external Hard Drive passport not available...

I have a WD 1TB external hard drive and when i plug in the device into my mac book pro it appears as if it is connected but the passport does not display anywhere on my computer. When i try to eject the WD it goes away for a second and comes back up that it is still connected. I do know i have zero space on my external hard dive but i just don't understand how early today it was working and now it can't be found.
Since i have used my external hard dive as my main source for time machine...will i still be able to retrieve my documents, pictures and videos if my hard drive is corrupt? has anyone had this problem before? If so, any suggestions? Thank you!

Unfortuanately WD external HD's have a pretty bad reputation with Macs. It has something to do with their enclosures as their internal HD's seem to work just fine. I would recommend exchanging that drive for one with a higher quality enclose. Just about any other manufacturer would be fine however the 3 best IMHO are:
OWC Mercury Elite Pro series
Lacie Quadra d2 series
G-Tech G-Drive series
All have similar features and build quality. I would be comfortable using any of the three but I've been successfully been using the Lacie's for 3+ years.
Roger

External Hard Drive is not connecting or loading to my laptop?

Why is it when i connect my Western Digital External Hard Drive to my laptop it does not connect or is seen on my laptop?

I have crazy solution to format it to FAT 32, it work a couple times on my several MAxtor, and Western Digital HD. But this is the last resort and if you are not handy and familiar, don't do it.
It happen on my external HD, so I crack the enclosure open, pulled the HD out and attached it as internal HD on a PC after adjusting the jumper to master and make sure no other HD attached to the motherboard. Make sure the motherboard detected (you can see it from bios menu).
Insert a bootable installer disk before XP ('98, ME, or 2000), and start from there until a promt comes, and type fdisk and you delete the old partition and create a new partition and restart once using the disk still and format it using FAT 32.
After that you put it back to the enclosure, and mount it to MacBook as a new HD with default factory format.
If you don't have the installer disk, this might help :
http://www.bootdisk.com/
But if your maxtor still under warranty better talk to them first and they might willing to reformat it for you.
Hope this help your external back and let you use it on your MacBook.

Files copied (backed up) on an external hard drive can NOT be opened

MacBook Pro (2.5GHz, intel Core i5)
OS X Yosemite, 10.10.2
I was running low on storage space on my Mac Pro. I copied all items on Desktop to my external hard drive. After all files were copied from MacBook Pro to the external hard drive, "get info" suggested that the amount of space taken entirely was the same between when all items were on the Desktop and when they were on the external hard drive. The number of items copied over were also identical. I should have been more careful, but I then deleted all items from the Desktop. It was until a few days later (today) that I noticed majority of the files copied over onto the external disk can NOT be opened now. The error message was "The alias “<filename>” can’t be opened because the original item can’t be found.".
I really don't want to lose these files, but where are they? They got their file sizes correct but just can not be opened. I tried copying these files back to Desktop on my MacBook Pro, that's not helpful. I tried accessing the files on a PC, still can't open the files. I tried repairing disk of the external hard drive (under Disk Utility), still can't open the files. I tried repairing disk permissions of my MacBook Pro hard drive, still can't open the files.
One last thing I tried in terminal (I am not terminal savvy at all, just googled the "The alias..." error message and copied the instruction): /usr/bin/SetFile -a a /Volumes/MAC This did not solve the problem, either.
Thank you for your help in advance!

Hi, eddie from pataskala ohio.
We love pro-active thinking here at the Apple Discussions and you're off to a great start.
Even though upgrading iTunes shouldn't affect your Library, one of the funny things about computers is that sometime, somehow, somewhere when you least expect it , they can do some not so funny things, like losing data that they're not supposed to. Which is why it's a good idea to have a back up copy of any data (such as your music) that you value in reserve ... just in case.
The most straightforward way, is to go to the iTunes Edit menu > Preferences > Advanced tab > General sub-tab and make sure your iTunes Music folder is assigned to its default location: C:\Documents and Settings\User Name\My Documents\My Music\iTunes .
Next make sure all your music is stored in that folder by using the iTunes Advanced menu > Consolidate Library option.
Now you can copy the entire iTunes folder - the iTunes Music folder and the iTunes library files in particular - to your external drive.
If anything does go wrong with the upgrade, you'll be all set to recreate your Library.

New Seagate 1TB external hard drive is not being selected by MacBook Pro

My new Seagate 1TB external HD is not being identified by the MacBook Pro (10.7.5 Mac OSX). Whereas the same being recognized by a WIN8 OS based PC. I need a format wherby the external HD should be recognised by both Mac OS and Win.
Kindly help.
Pls note my system is being run on safe mode, as there is a problem in the left shif key. Hence, while booting, it is automatically being shifted to the safe mode. I need to format the external HD, so that I can transfer to store my data.

If you want the drive to be able to both read and write on OS X and a Windows machine, you should format the drive as exFAT on the Windows machine. As to why the drive is not recognized when you boot into Safe Mode, that may be because the drive is formatted for another OS and it MAY BE that it's disabled when you run in Safe Mode (which disables a long list of things: see -> http://support.apple.com/kb/HT1564?viewlocale=en_US).
If you format it as exFAT on the Windows machine, you MAY BE able to have it mount on your Mac. No guarantees, though.
Good luck,
Clinton

ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453

I have installed a lacie porsche design 1tb external hard drive but how do I move things onto it so my mac speeds up

Hi Can anyone help? My Imac (about late 2008) was running very slow and I realised I had very little memory left on it so I was advised by the online chat buddy at Apple to buy an external hard drive. I have bought a lacie porsche design 1tb external hard drive which is great but how do I transfer things on to it so my computer works faster. I woudl imagine the buggest files I have are both photos and music (all bought form itunes).
Any help would be very much appreciated?
Thanks

How much free drive space is there? Right click on the Macintosh HD folder (or however you may have renamed it) and select Get Info.
The OS needs around 10 GB for its operation, but not all of that room is necessarily always needed. Depending on how close you get to the edge, creating more free space won't necessarily do anything to speed things up. It can certainy happen, but it's mostly a myth that low drive free space is a cause of slowdowns. This applies especially to zombie suggestions you may often see here to clear a certain minimum percentage of the drive out.
My recommendation would be to keep 10 GB free, plus room for anticipated expansion of your own files. So a ballpark might be at around 20-25 GB, but your mileage may vary, depending on how you use the computer.
If you have at least 10 GB free, then I'd say low drive space isn't causing your performance issue. Of course, moving things out isn't necessarily a bad idea either, if it's really needed--but you do realize that whatever you move out to an external drive will need to be backed up as well.
First backup everything, as this may be a symptom of a failing hard drive. This won't exhaust all the possibilities for the causes of the slow downs, but here are some things to start with: Open Disk Utility and select the drive, not the startup volume. What does it say for SMART Status, verified or not? You can better check to health of the drive with the demo of SMART Utility.
Next, open Activity Monitor. It's in the Applications folder inside the Utilities sub-folder of the main Hard Drive folder ("Macintosh HD", unless you have renamed it.) Go to the System Memory tab and take a screenshot of the bottom section only. (Screenshot is Cmd-Shift-4.) To insert it into your post use the camera icon above. Being low on RAM/memory can cause these kinds of symptoms. Like this:
In addition, see if there's any process or application consuming an inordinate amount of CPU. How much CPU is idle?

HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
%APPDATA%\Mozilla\Firefox\Profiles
You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files.

After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.

Hi
After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
Thanks
PT

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that? Looking for a solution that keeps me from re-ripping my CD collection.

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

Ned to back up files. Trying to reformat a WD 1TB external hard drive but my utilities keeps saying "choose scheme from volume pop up menu.." also says cannot be modified. What can I do?!

Help would be appreciated! Before I upgrade my 10.6.8 OS X I need to back up files. Trying to reformat a WD 1TB external hard drive but my utilities keeps saying "choose scheme from volume pop up menu.." also says "this partition cannot be modified." What can I do?! Take it back to Currys! Many thanks

Select the Top Most Entry for that drive, it will be the drive model # and have the size listed, then go to the Partition tab and select One Partition from the Partition Layout area drop down. Then select Mac OS Extended (Journaled) as the format, if that is the format you want to format it AS. Then click the Options button near the bottom of that windows and select GUID as the Partition Table. Close the options screen and clcik the Apply button.

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

E4200 No Longer Sees My Iomega 1TB External Hard Drive

Hello - I had an Iomega 1TB External Hard Drive connected to my E4200 router. I had shares confgured and they were properly running on the network.
As of yesterday, this all stopped working. The router does not see the drive; it is as though it is not plugged in.
I rebooted the router and it still does not work. I've connected the hard drive directly to my PC to verify that it works there, and it does.
The router is running Ver.1.0.03 (Build 14) of firmware (the latest).
Any suggestions?
Thanks!
Solved!
Go to Solution.

I've done as you suggested - I did this during a chat session with a support resource from Linksy. Things still behave the same.
I have tried your suggestion of trying another disk. I had an old Maxtor drive that I connected to the router; it works fine!!!
I've since done a chkdsk on my TB drive, and it checked out clean.
I'm guessing here - it appears that the 1TB drive is not identifying itself to the router's satisfaction, but it is OK for Windows XP. What's odd is that this all worked a week ago. The only thing I can think of is that we had some power outages during a recent storm that messed something up (which shouldn't be the case since it is all connected through a decent surge protector).
Any other ideas are appreciated.
Thanks!

LaCie 1TB external hard drive can not connect to E4200

Similar Messages

Maybe you are looking for