Lame imapfilter question

Hi, Everybody,
I am hoping somebody that uses Imapfilter can help me with a seriously stupid question. I'm trying to filter mail from the address "Certificate Services Manager <[email protected]>". The address appears like this when I view full headers in Mutt. My problem is that I can't seem to select by the address itself using imapfilter. When I execute the following two queries:
msgs = bsdad.INBOX:contain_from('Certificate Services Manager')
print("resultant size: " .. table.getn(msgs))
msgs = bsdad.INBOX:contain_from('[email protected]')
print("resultant size: " .. table.getn(msgs))
Only the first, not the second, has any rows in the table. Has anybody seen this before? Could anybody explain to me why this is happening?
Thank-you so much for your patience with my inexperience, and for your time and expertise.
Dan

I'm here (physically, what a thought) with beniro. His solution:
root (hd0)
kernel (hd0,0) root=/dev/hda3 ro devfs=nomount
My system still boots with
root (hd0,2)
kernel (hd0,0)/vmlinuz-2.6.6-usb root=/dev/hde3 devfs=nomount ro hdc=ide-scsi
I guess it's a new version of grub? Is this not the gayest problem in the world?

Similar Messages

Lame noob question that bothers me...

Ok, this is my truly lame question: Typically, how long does the cmos battery on a mobo last? I noticed that my board came with an extra (I built this puter a few months ago but I decided to ask this now). Thanks, I'm sure this will only take one reply from one of you nice people....

If your system is on 24/7, then the batt can last up to 4 and half years or more.
If you only only your system for 4 to 6 hours a day, max is around 4 years or less.
If you only have your system up for 2 to 3 hours a day, max is around 3years.
The battery is there to keep the system clock and BIOS settings in place when the system is not on, when the sysem is on, all these power to keep the settings will be through your PSU.

Lame GRUB question

Hey all,
Let me first say that this question will be lame (as the subject indicates). The backstory of this post is as follows:
I installed arch last night for the umpteenth time. I decided, this time, to use GRUB, as I haven't used it in ages. The configuration file looked fine and dandy so I let it sit with the defaults (autoprepared the HD as well). When I rebooted, GRUB failed, saying something was too long for the bootrecord, or something to that effect. It was late, so I shutdown and went to bed.
Now my question is this: what did I do wrong? Let me elaborate. I am at work and have alot to do before I get home, and I can fix this if I had the information at my finger tips. So I am relying on the arch community for information. The autoprepare sets up /boot (hd0,0), swap (hd0,1) and / (hd0,2), correct? Therefore (hd0,0) should be my boot partition, and (hd0,2) my root, correct? BTW I installed GRUB to my MBR...
If anyone could let me know what the proper GRUB configuration should look like for an Arch auto-prepared disk, please let me know so I can get this fixed when I get home.
Thanks in advance

I'm here (physically, what a thought) with beniro. His solution:
root (hd0)
kernel (hd0,0) root=/dev/hda3 ro devfs=nomount
My system still boots with
root (hd0,2)
kernel (hd0,0)/vmlinuz-2.6.6-usb root=/dev/hde3 devfs=nomount ro hdc=ide-scsi
I guess it's a new version of grub? Is this not the gayest problem in the world?

*.la files (possibly a lame newbie question)

I'm a newbie packager. I have successfully installed a lot of software from source, but I have never made my own Arch packages so far. Now, I have decided to try.
I have read the guide, and my package is correctly built. Now, it's time to make it well. When I was installing software from sources, I had many .la files. There are some files of this type in my package too. The problem is, there are no .la files in /usr/lib, on my Arch system. I have also found this news saying that I should get rid of all .la files from my package. The news is outdated though...
The question is: should I get rid of .la files from my package? Will it work correctly after that?

Profjim wrote:
Snowman wrote:There is a minority of packages that needs the .la files to work properly. You should remove the files and see first if your app works correctly without them. For that reason, I wouldn't make it the default setting in /etc/makepkg.conf. The default makepkg.conf has the option set to keep these files. They should be removed on a PKGBUILD-by-PKGBUILD basis with the !libtool option.
What's wrong with making !libtool the default and having the packages that need them specify options=(libtool). Won't that also work? In fact, shouldn't that be the preferred way to write PKGBUILDs for packages that require the .la files, so that it's not dependent on how the user has configured makepkg's defaults?
That would also work. Probably, the default is to keep the the libtool files because when we started the libtool-slay, we proceded by removing the libtool files from the packages where they weren't necessary. If you don't want it to be dependant on the makepkg.conf default, then ideally each PKGBUILD should specify if it needs the libtool files or not.
Profjim wrote:
Searching my install, I see:
gnutls, libarchive, subversion have .la files and have options=(libtool...) in their PKGBUILDs
fam has .la files but doesn't have libtool in its options. But it does have a comment saying 'Don't !libtool'. Why then doesn't it list libtool in the options?
It wouldn't hurt to have libtool in its options. You can submit a bug report.
Profjim wrote:libdmx, libsasl, libvorbis, and neon have .la files, but either don't list libtool in their options line, or lack an options line altogether. Shouldn't we be able to construe that as a statement that they don't require the .la files? Does anyone reading this thread have knowledge of whether any of these specific packages does require their .la files?
The default /etc/makepkg.conf keeps the libtool file. Either they need the libtool file (I think neon needs it) or
the maintainer forgot to libtool-slay it.
libvorbis doesn't have a libtool file on x86_64 so you might want to submit a bug report to have the i686 package libtool-slayed. For libdmx and libsasl: you can check if they work without libtool files and bug report if they do.

Newbie lamer restore question

I have a .DMP file from an Oracle 8.1.7 server, which I need to restore into a different server runn 8.1.6. How do I do it, and do I need any additional information, control files etc?
I'm a SQL Server DBA, and don't know where to start... :-(
TIA,
Alasdair.
MCSE MCSD MCDBA

I tried. however it said input/output error and can't create image. Should I choose 'compressed' rather than DVD/CD master. I don't understand what compressed means, but it was chosen already when i first click NEW IMAGE.

Lame Concurrency Question

I am seriously thread retarded. I can always get my threaded code to work without
any problems but that doesnt mean I have a clue about what is going on.
What is the best way to code the following common functionality:
class Runner implement Runnable{
public void run(){
while(run.booleanValue() == true){
do something();
Thread.sleep(some time);
public void stopRunning(){
run = new Boolean(false);
Boolean run = new Boolean(true);
}Do you just make stopRunning() synchronized?
Or do you lock on the "run" object?
If so, do you have to use a "synchronized(run)" block in both methods?
If you synchronize on an object should you use "synchronized(object)" every
place the object is used?
public void run(){
while(true){
synchronized(run){
if(run.booleanValue() == false){
break;
do something();
Thread.sleep(some time);
public void stopRunning(){
synchronized(run){
run = new Boolean(false);
}(By the way, ive never done the above. I usually just make stopRunning() synchronized.)

TuringPest wrote:
ignore my concurrency ignorance, lol, but i thought that whenever you had one
thread changing the values of something in another thread it had to be synchronized -
even if its a primitive?Yes. Or the variable has to be volatile. But, as already discussed, you don't need the running flag here.
while (!Thread.interrupted()) {
doStuff();
try {
    Thread.sleep(millis);
catch (InterruptedException exc) {
    log it?
    Thread.currentThread().interrupt();
}

Lame JCheckbox Question

Hi All,
My check box that is selected by default does not deselect physically but it does execute the code to do that.
Here is the code:
private final class CheckBoxListener implements ActionListener,
ItemListener, ChangeListener {
public void actionPerformed(ActionEvent e) {
// the getIsLanguageCBx is a function to sets up the Checkbox:
//create, add tips and other functionaly related stuff
   boolean state = getIsLanguageCBx().isSelected();
if (e.getSource() == isLanguageCBx) {
   if (state) {
     //hide the label and combo
     isLanguageCBx.setSelected(false);
     showCombo(false);
} else {
      //show the label and combo
      isLanguageCBx.setSelected(true);
       showCombo(true);
    public void itemStateChanged(ItemEvent e) {
       if (e.getItemSelectable() == getIsLanguageCBx()) {
           System.out
                  .println("Checkbox sent the item changed event event");
          if (e.getStateChange() == ItemEvent.DESELECTED) {
           //hide the label and combo
             isLanguageCBx. setSelected(false);
             showCombo(false);
              System.out.println("In state deselected");
             } else {
                 //show the label and combo
                 isLanguageCBx.setSelected(true);
                 showCombo(true);
                  System.out.println("In state selected");
             }//if
         }//if
The above is a inner class to my other class. What I want the code to do is to show certain fields if the checkbox is selected and hide them if deselected.
About the repeated code: if you can advice on a beter way to achieve this please you are more than welcome.
Yours,
Me

cuz you are reseting the state. take out the
isLanguageCBx.setSelected(false);
and
isLanguageCBx.setSelected(true);
lines. Checking it by clicking it changes the state, then fires the event, so you are getting that event and reseting it to the opposite of the new state, which is the old state.

Built-in Input question

I know this might sound like I'm new to iMac, but I am so I'm sorry for such a lame silly question.
I have a 27" iMac I use at work and I have an iPhone. I plug in my iPhone to my iMac input on the back of the computer to listen to music from my iPhone.
Oddly, I see the Input Level indicator showing sound input but I cant get it to actually play on the internal speakers on my iMac.
OUTPUT SETTING is set to Internal Speakers
INPUT SETTING is set to Line In
...and nothing...

Mac OS X does not automatically play audio directly from the line input to the speakers. Try the free app LineIn:
http://www.rogueamoeba.com/freebies/
Regards.

I'm trying watch videos, but the flash program is blocked by Apple.

I'm trying to watch some instructional videos, but they say I need to download "flash". When I try I'm told that Apple blocked this, but can get something to help. I have NO idea what it is talking about Can someone help me?

Who ever told you that Apple has blocked flash is incorrect. Adobe has blocked flash from working on EVERY iOS device. The only thing that Apple should block is all of these lame 'flash' questions cluttering up these forums. You'll never see it snow at the equator, you'll never see pigs fly, and you'll never see any of these people asking this same "flash question" ever using the search function...
OK, maybe you might see the first two happen...

[POSDM] Credit card number masking

Hi Experts
We have a requirement to mask the credit card number on display (i.e. POS workbench) BUT show full card number on data level for BW data processing.
I am able to mask the card number on display through the config below:
Cross Application Component --> Payment Cards --> Make Security Settings for Payment Cards. (Masked Display and Encrypted When Saved)
Appreciate if you can kindly guide me to the setting for allowing to show the full card number on data level.
Moreover, I have searched in the note here that Installation of the encryption library "SAPCRYPTOLIB" is needed. Is it true?
PCI Implementation - Logistics - SAP Library
Thanks a lot for your help.
Dominic

Hi Lam,
Your question is not clear,
You can achive the BW data processing from following IMG settings,
Here we can do the Enrichment/Modification of Data During Update to BW for masked credit card details,
Credit card details in BW (POS ANALYTICS) can be achived from the below datasource,
Thanks and Regards,
Ramesh D

How to Cancel Preorder of iphone 4s?

I ordered the iphone to days ago and I got "Black" by boyfriend wants the iphone now and I don't want the same color as him (I realize how lame this question is). I called Verizon and they said I could cancel the order and then just submit it again. I asked them if I could do that online, but I can't figure out WHERE to do this online?
Can someone give me a link or explain the process to me? thanks!

Hello DistanceMMP!
Thanks for posting. Glad you to hear you ordered the great new iPhone! I am happy to assist you with your order.
I see you placed the iPhone order a week ago, if your iPhone has been shipped then you wouldn't be able to cancel the order online. However, you have a few options; you could give your boyfriend the one you ordered by performing a device switch on My Verizon. You would then be able to place an order for the white iPhone on his line and have it activated to your line of service. We also have multiple cases and covers you can purchase for your iPhones via our website. This can be an option to differentiate the two. Also, keep in mind you are covered under our 14 day Worry Free Guarantee policy. You can exchange your device once within the 14 day Worry Free Guarantee to the device of your choice. There's a one time $35.00 Restock Fee.
I trust I have answered your questions, and have addressed your concerns.

Solo is driving me mad!

Hi-
I've been using Motion for just a little while now (about 8 months) and I can't figure out the toggle hierarchy of the Layer On/Off, Solo, Active, etc. I'm working with dozens of layers and am constantly turning things on and off (seemingly randomly - using Option Click sometimes changes it from and to blue, sometimes the layer is grayed out but footage still shows up in composition). It's probably so easy, but I just can't get my head around it. I've looked and looked but I can't find a straightforward explanation in any of my documentation.
Sorry if this is a lame newbie question, but I searched All of Motion for "solo" and only came up with 4 hits which didn't answer this.... Can anyone tell me where to look or explain it to me? Thanks!

Heya,
Clicking on the 'On' checkbox shows/hides the object. This is like the eye icon in Photoshop. This only controls visibility, though, so a disabled object can still be used as a reference image or participate in simulations. For example, you might have a disabled (invisible) object flying around, attracting particles.
Soloing temporarily disables all other objects except the one being soloed. This is so you can briefly hide the rest of your project, allowing you to focus on a single area. You can also solo more than one object, if you so choose.
Solo can be activated via the Object menu, a hot-key, or Option+clicking on an object. This will gray out (disable) all other objects, except any children of the soloed object. Solo is a toggle, so to leave the solo state, just Option+click on the same object again or use the Solo command from the Object menu, which will allow you to unsolo everything.
An example use of solo: I have a complicated (and slow) background for my project. I've decided that I'm done with the background, so I want to render it out and bring it back in as a movie, which would speed up my project. To do this, I can just quickly solo the background layer and do the export, without having to manually turn off the rest of the project.

Downloaded CS3 premium from web but it won't let me Setup

I Downloaded CS3 Permium from the webpage I was provided with on here to my new MAC because I lost my install disc. I am now trying to open Setup to follow those directions but it tries to initialize and gives me an error message and to contact Support....who then tell me all they can do is sell me the newest version. First, what am I not doing for the error message to come up? Also, it IS true I can download this trial web version and put in my serial number to get it to be permanent right? Sorry for the lame confusing questions...I have a 4 month old and am not all there now-a-days!

copy and paste the error message or attach a screenshot of it.
and which link did you use to download cs3 premium?

Exporting options are grayed out

I know this is a lame, basic question, but does anyone have any suggestions as to why are my export options in iMovie grayed out? As a result, I am not able to do anything with my completed movies.
What am I missing?

decaharms wrote:
.. What am I missing?
you can export only Projects, not Events.
click in your Project Window to 'open' any project, then you're export options are blacked.

1120 error, I don't even know how this is possible-

Lines that matter:
import flash.errors.IOError;
import flash.errors.IOErrorEvent;
import flash.net.URLLoader;
import flash.net.URLRequest;
var loader:URLLoader = new URLLoader();
loader.load(new URLRequest(fileUrl));
loader.addEventListener(IOErrorEvent.IO_ERROR, errorHandler);
fileUrl is, what do you know, a variable with the location of a (XML) file in it.
errorHandler… handles errors.
The point is that I get this:
1120: Access of undefined property IOErrorEvent.
IOErrorEvent isn't a property. IO_ERROR is a static method of IOErrorEvent, so I have no idea why I even get that error! What really confuses me is that these lines are from an application that does not display the error (came with a book).
Any help?
And yeah, I know the answer is obviously going to be something trivial, so sorry about how lame this question is.

The error is basically saying that the compiler couldn't find a class definition for IOErrorEvent, so it doesn't know that you are referencing a class. For all that the compiler knows, it could be a property with capital first letter

Lame imapfilter question

Similar Messages

Maybe you are looking for