Landscape design using J2SE

Hi,
I am hoping that you could assist in the following interface design matter.
Engen have Oil deports right over the country. These are connected via the WAN.
These depots runs a Business Application that needs integration with SAP. There are about +/-12 that operate 24/7.
Currently they are transferring files between the Deport and SAP via MQ Series.
These transactions files are time critical and are generated adhoc. They are shipment instructions to automated
truck loading equipment at the plant and the response back to SAP on the actual load taken.
The plants are sitting in places quite remote which geographically could be hundreds of kilometers away.
From a design point of view would it be best to just use a File Adapter on the Central Adapter Engine, via a share or would the use of
a J2SE Adapter Engine (Hosts does not support J2EE due to RAM requirements) with a local File Adapter be best. Keeping in mind that the support and maintenance will have to be done from a Central location (HQ).
My challenge so far has been that I have not been able to find SAP documentation to guide me.
I would greatly appreciate if you could refer me to some document that could assist or with any advice you might have.
Regards
Willie Hugo

Hi Willem!
To keep landscape and maintenance as simple as possible I would start to use the Central Adapter Engine and FTP on the local sites. Are all local sites connected via secure network connections like intranet or VPN? If not security aspects also have to be taken into account (FTPS and SFTP are not secure).
Please keep in mind just the simple and day-to-day situation that you have to apply patches to adapter engine software. In the worst case all remotely installed adapter engines must be patched by someone. Addintionally you have to ensure at least a 2-system landscape. That means centeral PI x 2 (or 3) plus decentral Adapter Engines x 2 (or 3).
But you can also have a look at service marketplace under Alias "instguides". There you can find e.g. a Technical Infrastructure Guide for PI 7.1 (and other XI/PI releases). There you will also find security guides if security will become a cirtical factor in your environment.
By the way: Is it planned to use the PI/XI instead of MQ Series or can it also be a possible solution to leave everything as it is in the locations and just connect MQ series with XI/PI?
Regards,
Volker

Similar Messages

Altering photos....eg.landscaping designing and the like...

How does one take a dig photo and alter it? ... in other words, ...is there anyone out there that has had experience with landscape design using an iMac (and some sort of purchaseable program) and actually design a landscape?
...i want to do some major changes around my house and my wife just doesn't get what i am wanting to do.... if i have an altered photo and actually show my wife then she will understand my proposals.....

I heartily second PhillyPhan's recomendation. You can do some very advanced editing with PSE. Amazon.com often has deals on PSE for about $80. Or, if you're in the market for a new scanner, Canon bundles PSE 4 for Mac with many of it's scanners, even some of the lower prices models.
If you're looking to do some landscape planning OmniGraffle has templates for laying out areas and adding different plant icons for planning purposes. It came with my G5.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Landscape Design Plans

Hi
I'm looking for help to create plans for a landscape design and I would like it to be vector-based if possible.
I have outlines of trees as shown below (ArchiCAD) but I'm not sure of the technique to make the grass look how it does and how to make the trees look that way (apart from drop shadow)
The site I'm creating a landscape plan for is around 60% grassland, so I want to use the same effect on the first image to represent grass (rather than a solid colour). The next biggest element of the site is trees, around 20% in various sizes, so I want to re-create the trees as shown in the first image. I have Vector outlines for the trees (From ArchiCAD) but I need to apply some sort of style to achieve the effect as shown above.. The other main part of the landscape is limestone pathways, which are very 'rough' i.e merge into the grass, like on the second image.
What I'm asking is techniques in Illustrator to basically re-create the first image, and add some limestone pathways... I can't really give you a plan because it's basically just grass and a few trees... I have to plan the landscape for a project.
The overall 'theme' for the plan is 'sketchy' If that helps
Thank You

For the edges of the grassy fills, you can apply a solid green fill, apply an Inner Glow Effect to the fill to get the vignette. To get the stipple and/or grain, combine this with another raster effect, like Spatter or Grain.
You do not need a high Document Raster Effects Resolution setting for this kind of thing, even if it's intended for commercial print. Screen res or 150 PPI is a gracious plenty. When you hit upon a combination you like, store it as a Graphic Style so it can be applied to other objects with a click.
For your trees, draw three or four variations. Store each one as a Symbol. Place Instances of the Symbols whereever you want on the drawing. Use Transform Each to randomly alter their scale/rotation without disturbing their positions. You can paint an entire forest this way in minutes, and it's also a data-economical way to build the file.
JET

How to publish crystal report designed using SAP Add-on toolbar

we have installed the crystal report designer V10 and the SAP add-on on the desktop.
we have designed a formatted report in crystal report designer using an existing BW report that was created using Bex query designer. After this we saved the crystal report back in BW to a role.
We have not published the report to crystal enterprise server, since the connection to same is not in place.
We would like to know how to publish this report in Enterprise portal ?
Can we bypass publishing the report to crystal enterprise server and publish the report on browser or through EP ?

hi
Check on this help page if it can help you
http://help.sap.com/saphelp_erp2004/helpdata/en/f1/0a569ae09411d2acb90000e829fbfe/frameset.htm
REgards
Alain

Try to use J2SE Version 6 with Oracle E-Business Suite 11i

Dears ,
i have an upgrade task from 11.5.10.2 to R12.1.1 and database from 9.2.0.8 to 11.2
so i apply patches :
1- 7429271
2- Upgrading Developer 6i with Oracle Applications 11i [ID 125767.1]
3- 9535311
4- 6241631
5-upgrade to JRE : Using J2SE Version 6 with Oracle E-Business Suite 11i [ID 401561.1]
when i run :
txkrun.pl -script=SetJDKCfg -contextfile=$CONTEXT_FILE -runautoconfig=Yes -appspass= <APPS_schema_passwd> -jdktop=[JDK60_TOP]
faced error :
java.lang.NoClassDefFoundError: java/util/HashMap
at
at oracle.apps.ad.tools.configuration.Customizer.getProdTopDrivers(Compiled Code)
at oracle.apps.ad.tools.configuration.Customizer.getAllDrivers(Compiled Code)
at oracle.apps.ad.tools.configuration.VersionConflictListGenerator.getAllConflicts(Compiled Code)
at oracle.apps.ad.tools.configuration.VersionConflictListGenerator.main(Compiled Code)
Exception in thread "main" Using Context file : /vol3/oracle/prdappl/admin/PRD_mcd-test.xml
Context Value Management will now update the Context file
and when try to run autoconfig on APPSTier i faced :
java.lang.NoClassDefFoundError: java/util/HashMap
at
at oracle.apps.ad.tools.configuration.Customizer.getProdTopDrivers(Compiled Code)
at oracle.apps.ad.tools.configuration.Customizer.getAllDrivers(Compiled Code)
at oracle.apps.ad.tools.configuration.VersionConflictListGenerator.getAllConflicts(Compiled Code)
at oracle.apps.ad.tools.configuration.VersionConflictListGenerator.main(Compiled Code)
Exception in thread "main" ERROR: Version Conflicts utility failed.
Terminate.
how can i solve it .
your response will be highly appreciated
Regards ,,,
Mohamed Mahgob

Please see these docs.
Creating "appsutl.zip" Failed On "java.lang.NoClassDefFoundError: java/util/HashMap", What is the Potential Solution ? [ID 1310838.1]
AdMKAppsUtil.pl Failing Can't Find Java HashMap [ID 1338399.1]
After Applying Patch 9535311 Get java.lang.NoClassDefFoundError: java/util/HashMap Error [ID 1188327.1]
Thanks,
Hussein

How to use j2se 1.4 logging features with j2ee 1.3

Hi,
We have developed an EJB that will run in the j2ee 1.3 container of weblogic 5.0
We would like to use the logging features of j2se 1.4 in our ejb.
Can this be done ?
How do I install and use j2se 1.4 a long side of j2ee 1.3 ?
Is this a recognised configuration ?
Many Thanks,
Mark.

Is it possible to install j2se 1.4 on the same machine
that is running weblogic with j2ee 1.3 ? Yes.
If it is.... How do we do it ?Just install it in different directory - the installer will do this for you by default anyway.
How do we protect our code running in the j2ee 1.3 container from
mistakenly using the classes provided with j2se 1.4 ?Thats what PATH and CLASSPATH environment variables are for. Read the tutorials on the left there for more information.
Do we end up with 2 separate VMs one a implementing
j2ee 1.3 and one a j2se 1.4 ?You end up with as many as you run.
Every time you run java (java.exe on windows, just plain java on UNIX) you run the version of the VM that's on your PATH.
It's quite normal to have (on the same machine) a 1.3 VM running Weblogic and a number of 1.4 VM's as clients of that Weblogic installation.
I think I'm right in saying that 1.4 VM's are (in some cases) regarded by BEA as supported clients of a Weblogic server running in a 1.3 VM, but you'd have to check their e-docs site for exact details.

Cannot login to App designer using PS id while able to login in data mover.

Hi,
I am installing peopletool 8.50 (HRMS). I ran all the sql scripts successfully. Ran the DMS script as well for demo database.
When I am trying to login in App designer using PS/PS i'm getting the following error..
File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 404 - ORA-01017: invalid username/password; logon denied
while I am able to login in data mover in boot strap. Can anybody pls help me out?

yes I am using Oracle 11g.
and man.. thanks a lot for your help. that was really awesome post :-)
People do say true.. here only I can find the GODs of Oracle.
Thanks Again
Gaurav
Edited by: Gaurav_laconic on Mar 12, 2013 6:13 PM

How to call web service using J2SE 1.3?

Dear All,
i have developed a web service by jdev 10.1.3 (JAX-RPC with web service security
enabled).
i generate the ws proxy (jdev 10.1.3) and run it with wsclient_extended.jar (required JDK 1.4.1 or above??).
but one of my client say he has to use J2SE 1.3.x (as OS=AIX 4.3 that without J2SE
1.4.x ), could anyone tell me how can generate ws proxy (with supporting
library) for jdk 1.3.x?
if oracle don't have such library / tools, any third party tools / library available?
thank you.
lsp

I'm found answer:
Java and SAP Portal blog: How to call web service from java code example

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

I think to bye imac for graphic design use purpose. kindly guide me. Is iMac best for me ?

i think to bye imac for graphic design use purpose. kindly guide me. Is iMac best for me ?

Hello artistsagar,
The word best is always subjective. It is all a question of your needs, your working practice, your available space; I could go on.
A Mac (probably a 27"one) may well be perfect. Good size screen, easily understood basic functions and a huge number of recommended programs. Just Google Mac graphic design to see what is available.

How to use J2SE using JSR-82????

I need to develop a code that can access the Bluetooth device...
I need to know how to use J2SE with JSR-82 API....
-Or do you guys know some Bluetooth Protocol Stack in which I can download for FREE?
-It should be FREE? it should run on Windows 98/2000/XP platform ..
thanks

I think it's only beta at the moment
http://java.sun.com/products/sjwtoolkit/download-2_3.html

If you are not using J2SE 1.4 - OrderedMap - (maintains order of insertion)

Hi,
If you are not using J2SE 1.4 and still want to maintain the order of insertion unlike HashMap or Hashtable(which doesn't allow)
OrderedMap comes to resue!
import java.util.ArrayList;
import java.util.List;
import java.util.TreeMap;
public final class OrderedMap extends TreeMap {
     private List list= new ArrayList();
     public OrderedMap() {
     public Object put(Object key, Object value) {
          list.add(key);
          return super.put(key, value);
     public List getKeysList() {
          return list;
};;Mail me how to use it!
Bye
tuniki
[email protected]

Hi, Dude!
Probably you have to read the subject b4 posting something!
(Re: If you are not using J2SE 1.4 ->OrderedMap ->(maintains order of insertion))
Tuniki
[email protected]

BOXI3.0 Universe Design using view or query in SQL

Hi. Alias here.
I would like to know what are the effect to the BOXI3.0 or SQL performance if:
1. We are using view or query in creating the universe?
2. Is it the correct way of creating the universe only from tables?
3. If need to do combination between tables and views?
Hope you all can reply to this matter.
Regards,
Alias

Hi Alias,
Designer has the capability to import tables and views you cna use in the design of the universe. Furthermore, you can also create a derived table in the universe - in simple terms it is much like a view, but the code is in the universe availble to the universe designer.
With all this available to you, it is pretty much up to you how you want to tackle the design. I would say first prise is using the physical tables in the databse, then move to using a view and if there are certain restrictions on the designer, use the derived tables.
Remeber this, at the end of the day, any SQL code generated or used is passed down to the database to be processed, may it be the query from the universe directly on the tables or by means of the views or derived tables - the database server will need to crunch through it all - and this is what will determine your performance.
Regards
Jacques

How to use report designer using bex analyser give screenshots details

how to use report designer using bex analyser give screenshots details

Hi,
As per my understanding you want to see Query Designer when you execute the query in BEx Analyzer.
When you launch BEx analyzer,you should be able to see new tab of "Business Explorer" in your Toolbar.
So,when you execute the query in BEx analyzer,in order to goto query designer screen,click on Tab "Business Explorer",select option "Change Query" and then select the option "ChangeQuery (Global Definition)".
It will open the query designer in which you can modify the query and save it.
Regards,
Nilima

How to use report designer using bex analyser ineed screeenshots steps

how to use report designer using bex analyser ineed screeenshots steps

Please try to search and stop asking for all types of screen shots. Thanks!

Landscape design using J2SE

Similar Messages

Maybe you are looking for