Landscape Design Plans

Hi
I'm looking for help to create plans for a landscape design and I would like it to be vector-based if possible.
I have outlines of trees as shown below (ArchiCAD) but I'm not sure of the technique to make the grass look how it does and how to make the trees look that way (apart from drop shadow)
The site I'm creating a landscape plan for is around 60% grassland, so I want to use the same effect on the first image to represent grass (rather than a solid colour). The next biggest element of the site is trees, around 20% in various sizes, so I want to re-create the trees as shown in the first image. I have Vector outlines for the trees (From ArchiCAD) but I need to apply some sort of style to achieve the effect as shown above.. The other main part of the landscape is limestone pathways, which are very 'rough' i.e merge into the grass, like on the second image.
What I'm asking is techniques in Illustrator to basically re-create the first image, and add some limestone pathways... I can't really give you a plan because it's basically just grass and a few trees... I have to plan the landscape for a project.
The overall 'theme' for the plan is 'sketchy' If that helps
Thank You

For the edges of the grassy fills, you can apply a solid green fill, apply an Inner Glow Effect to the fill to get the vignette. To get the stipple and/or grain, combine this with another raster effect, like Spatter or Grain.
You do not need a high Document Raster Effects Resolution setting for this kind of thing, even if it's intended for commercial print. Screen res or 150 PPI is a gracious plenty. When you hit upon a combination you like, store it as a Graphic Style so it can be applied to other objects with a click.
For your trees, draw three or four variations. Store each one as a Symbol. Place Instances of the Symbols whereever you want on the drawing. Use Transform Each to randomly alter their scale/rotation without disturbing their positions. You can paint an entire forest this way in minutes, and it's also a data-economical way to build the file.
JET

Similar Messages

Altering photos....eg.landscaping designing and the like...

How does one take a dig photo and alter it? ... in other words, ...is there anyone out there that has had experience with landscape design using an iMac (and some sort of purchaseable program) and actually design a landscape?
...i want to do some major changes around my house and my wife just doesn't get what i am wanting to do.... if i have an altered photo and actually show my wife then she will understand my proposals.....

I heartily second PhillyPhan's recomendation. You can do some very advanced editing with PSE. Amazon.com often has deals on PSE for about $80. Or, if you're in the market for a new scanner, Canon bundles PSE 4 for Mac with many of it's scanners, even some of the lower prices models.
If you're looking to do some landscape planning OmniGraffle has templates for laying out areas and adding different plant icons for planning purposes. It came with my G5.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Home/landscape design app for mac?

Is there a consumer-level (not some $1000 3D CAD pro app) home and/or landscape design application available for mac similar to Home & Garden designer programs for PC?? I can't find one to save my life!

Thanks for the ideas - I've searched for quite a while. I mean months now. The Apple website doesn't seem to have what I'm looking for. I've seen programs/apps widely available at regular retail stores for PC - that aren't professional CAD 3D programs that cost 100's or even 1000's of dollars just for laying simple landscape and/or interior design plans. I'm not a professional or business owner - I just want something that can help me layout plans for landscaping my yard and for home remodels etc. There's nothing like this for mac?

Hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

Hi Dima,
Please refer to the help documents below:
Troubleshoot Creative Cloud download and install issues
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

Graphic Design Plan?

I am a student, and I see that there is an affordable 10/month plan for photography exclusive programs. Is there something similar for a graphic design plan? Like a 15/month plan for Illustrator and Photoshop?

Hi,
I am sorry but there is no such plan.
If you wish to subscribe for only Illustrator and Photoshop, you will need to sign up for single-app plans separately for each application.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Regards,
Sheena

Is there a notation for designing planning hierarchies/architectures?

Hi everyone,
I wonder if there is a standard notation for designing planning hierarchies/architectures.
When designing BW InfoCubes, I can use ME/RM or ERM for conceptual design and SAP Star Schema for logical design. Is there anything similar for designing planning hierarchies/architectures?
Best regards, Dan

The first highly limited version of the native Android viewer should be available in the next release v28. While it will support phones, it will be limited in its feature set. Over the next several releases, more overlays and other features will be added to the native viewer.

Need landscape design blueprint for trainings

hi
i need a landscape design with all business components and all netweaver components included in that design. can any body give me the template landscape architecture
thanks
akhil

Hi,
Check this...
http://www.easymarketplace.de/online-pdfs.php
( Browse in this site)
https://www.sdn.sap.com/irj/sdn/industry-forums
Check this also.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/7843c5eabd1ad0e10000000a114cbd/content.htm
May i know what is the Landscape you are having or u will have ??
2system or 3 system ??
Note: Points always encourage me to reply !!

I got hang up and freeze my Mac when start landscape design 17 by Encore which i bought it from App store

Dear sir.,
I bought from App Store
the following
Landscape Design 17, v17.0.3 (4+)
ENCORE
since I download it It does not working and when the program start freeze my computer and hang up until I power force to quit
I did try to contact the company Encore more than 20 Emails but I did not get any respond from them
please solve my problems as long as I bought this program from your store not directly from Encore
best regards

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Transport Landscape design??

Hi all,
Our client is saying that they require 2 Development system,2 Quality & 1 Production System.How will we design our Transport Landscape??Is it possible to have 2 development & 2 QA in one system landscape??

Hi,
This configuration is very much possible, in fact i have worked with a client with similar configuration.
Transport route can be
DEV1->QA1->PRD
DEV2->QA2->PRD
Now whenever request from DEV1 reaches production it should also simultaneously move to DEV2 and QA2.
The reverse is to be done when request from DEV2 reaches PRD, it needs to be flushed back to DEV1 and QA1
This is needed to maintain synchronization between two DEV and QA
Synchronization danger occurs in scenario when changes/enhancements of similar type are performed at same time in both dev.
Hence any changes/Enhancements planned should be checked for clash or else synchronization is extremely difficult to achieve.

Landscape design using J2SE

Hi,
I am hoping that you could assist in the following interface design matter.
Engen have Oil deports right over the country. These are connected via the WAN.
These depots runs a Business Application that needs integration with SAP. There are about +/-12 that operate 24/7.
Currently they are transferring files between the Deport and SAP via MQ Series.
These transactions files are time critical and are generated adhoc. They are shipment instructions to automated
truck loading equipment at the plant and the response back to SAP on the actual load taken.
The plants are sitting in places quite remote which geographically could be hundreds of kilometers away.
From a design point of view would it be best to just use a File Adapter on the Central Adapter Engine, via a share or would the use of
a J2SE Adapter Engine (Hosts does not support J2EE due to RAM requirements) with a local File Adapter be best. Keeping in mind that the support and maintenance will have to be done from a Central location (HQ).
My challenge so far has been that I have not been able to find SAP documentation to guide me.
I would greatly appreciate if you could refer me to some document that could assist or with any advice you might have.
Regards
Willie Hugo

Hi Willem!
To keep landscape and maintenance as simple as possible I would start to use the Central Adapter Engine and FTP on the local sites. Are all local sites connected via secure network connections like intranet or VPN? If not security aspects also have to be taken into account (FTPS and SFTP are not secure).
Please keep in mind just the simple and day-to-day situation that you have to apply patches to adapter engine software. In the worst case all remotely installed adapter engines must be patched by someone. Addintionally you have to ensure at least a 2-system landscape. That means centeral PI x 2 (or 3) plus decentral Adapter Engines x 2 (or 3).
But you can also have a look at service marketplace under Alias "instguides". There you can find e.g. a Technical Infrastructure Guide for PI 7.1 (and other XI/PI releases). There you will also find security guides if security will become a cirtical factor in your environment.
By the way: Is it planned to use the PI/XI instead of MQ Series or can it also be a possible solution to leave everything as it is in the locations and just connect MQ series with XI/PI?
Regards,
Volker

Does anyone know of an app that designs plans for woodworking?

I'm looking for an app from the mac app store that can design woodworking plans for a good price, free would be nice but willing to pay for it (if it is absolutely a good app, as you can not return apps haha), I would like to have it in 3D but its not necessary.
Looking for all ideas, even if theres a web based site that can do what I'm looking for.
Thanks in advance.

There are a couple iPad/iPhone apps but the one that seems to work the best is this one here and it's only $19.99 and is also 3D. I don't know of a similar app for Mac.
https://itunes.apple.com/us/app/woodcraft/id467348986?mt=8&uo=4&at=1l3v47M

SLD Landscape Design Question

After reading the Planning Guide - System Landscape Directory, I am left with a question.
The Setup:
Standard three system landscape
ECC 6.0 Ehp5 on NW 7.02ECC Instances: DE1, QE1, PE1
PI 7.31
PI Instances: DP1, QP1, PP1
PI Business Systems: DE1CLNT100, QE1CLNT100, PE1CLNT100
Each PI Instance has a local SLD
Management LandscapeSolution Manager 7.1 on NW 7.02
SolMan Instance: SP1
Local SLD
LMDB
Reading through the Planning Guide, the recommendation (pg. 45, picture below) seems to be to have all systems self-report to PP1. That is, without synchronization, only PP1 knows about any systems because they all report to PP1 and do not report in to their local SLDs. The data is then sent back to DP1 & QP1 via bridge forwarding. Business Systems are manually entered into their respective local SLDs, but then have to be manually exported/imported from DP1 --> QP1 --> PP1. Once it's all gathered into PP1 again, all data is pushed to SolMan's SLD on SP1 via a unidirectional content synchronization.
If I read this correctly, then all SLD's will end up "knowing" all systems and business systems: e.g. the sld of DP1 will have entries for QP1 and PP1 and for business systems QE1CLNT100 and PECLNT100.
Earlier in the guide, I gathered that there was value in not having all of the data in Development in that there is then clear separation between non-production SLDs and production SLDs. The above recommended setup seems to go against this idea of separation. Plus, it requires a significant amount of manual upkeep.
As an alternative (pictured below), what if each environment only reported to it's local SLD (DE1 --> DP1, QE1--> QP1, PE1--PP1). (Note that in the picture the SLD is drawn separate, but I've heard that most customers run their local SLD on PI, so the SLD depicted in each environment actually runs on the PI system in this scenario.) Further, what if the SLD's then synchronized sequentially in a full unidirectional content sync fashion. (DP1 does a full uni-directional Content Sync to QP1, QP1 does a full uni-directional Content Sync to PP1, and PP1 does a full uni-directional Content Sync to SP1.)
DP1 would only know about it's own systems. QP1 would know about it's own plus DP1 (which it needs). PP1 and SP1 would both have full visibility into all systems. Furthermore, the manually entered business systems would also be automatically synchronized and the whold manual export/import process could be avoided or a manual export/import could be implemented between Q and Production for safety with an automatic bridge forward of Data Supplier data.
Are there downsides to the second scenario that I am not seeing? Please comment!
Best regards,
--Tom

Although the guide states that Dev systems only needs to know about other systems in the DEV environment and QAS systems only needs to know about systems in the DEV and QAS environments and only PRD needs to know all systems, I am finding that I can't get the groups set up correctly when the DEV environment has no visibility to the QAS environment.
It seems that the recommended structure (where all systems are known in all environments) will facilitate the correct setup of the PI transports. So far, that is the biggest arguement I've been able to find against the second approach outlined above. Using full sync all the way through is also not an option if you're doing any development as any changes in the DEV system automatically flow through to PRD almost instantly. Using automatic bridge forwarding and import/export might be a usable alternative, but the recommended approach from page 41 of the planning guide does seem to have the best of all worlds.

System Landscape Design for EP-ESS Production Environment

Hi Experts,
We are about to implement SAP Employee Self Service solution through SAP Enterprise Portal 6.0 on our Production server.Our activity on development server is completed.The Backend version we are using is R/3 4.7C and using ITS for integration between Portal and R/3.We are using Business Package for ESS 4.6C 4.7 release 50.4 .We hv ESS userbase of 1000 users .We want to design the system landscape for the Production Server implementation.Can somebody help me the Hardware parameters and system landscape for the same.My Email id is [email protected] .
Regards,
Saumya

Hi Kenneth,
I have checked all tables that the report made changes. So, I noticed that table was not changed at all.
Just to inform you, now everything is fine. All connections was stabilished. And I have done tests with sucess. PERFECT!
Once more, thanks and have a nice weekend.
Silvio Messias.

Design Plan For IBM WebSphere MQ

Hi,
I am trying to monitor a queue within IBM Websphere MQ using Oracle BAM.The configuration parameters of Enterprise Message Source looks like the following:
Type: IBM WebSphere MQ
Initial Context Factory: com.sun.jndi.fscontext.RefFSContextFactory.
JNDI Service Provider URL: file:/C:/JNDI.
TopicConnectionFactory Name: MQAPPDEV01.
Topic Name: MQTEST.2.ESB.LQ.
JMS Message Type: TextMessage.
Durable Subscriber Name (Optional):
Message Selector (Optional):
Client ID (Optional): esbsrv
I get the following error in Enterprise Link.The Plan has two nodes :Oracle BAM Enterprise Message Receiver->Grid
IMessageSourceReceiver->messageReceive: java.lang.ClassCastException
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
IMessageSourceReceiver->messageReceive: java.lang.ClassCastException
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 10/2/2008 11:11:03 AM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
I tried changing the JMS Message Type to MapMessage.But No luck.
Can anyone give me directions to resolve this issue or if there is some document i should be referring to.I am not looking for publish/subscribe design.This is strictly point to point.
Thankyou,
Suchith

It may be worth setting up a little java test program to try out your settings and see if you can recreate the problem in an environment where you have more control.
Are you sure that the messages are TextMessages?

Landscape design for tablet

Would it be wrong to design the tablet in a landscape format?
ANd should I change the site properties to do this?
Thanks, Rebecca

Hi Rebecca,
Please take a look at this forum post. It has good description and suggestion about the layout :http://forums.adobe.com/message/5962039#5962039
Cheers!
Aish

Landscape Design Plans

Similar Messages

Maybe you are looking for