Landscape texting problem

My iPhone 4 suddenly won't type texts in the landscape position Any ideas? iOS 5.1. Mail works fine...

Similar Messages

IOS8 / iPhone 6 Landscape Text Problem

Anyone experience a problem texting in landscape mode? Mine works fine but my wife's hangs on the first line of test. It won't wrap. Tried rebooting the phone, but problem persists. On her's anyway.

To try to get rid of the many bugs that was supposed to be fixed with 8.0.2, but still very much remained on my phone, this is what I did.
I contacted apple support and was told to do a full update and recovery with iTunes, basically wiping the phone and installing 8.0.2 directly, without any upgrading from earlier versions, that may cause issues and leave trash code/bugs. I did see a couple odd things on my phone that may have been caused when updating from first iOS 8 release to current 8.0.2. One thing was two camera storage folders when looking at the device from my PC, in which were many shortcuts to some "Drive" or something. Could not be accessed, could not be deleted. No matter.
Anyhow, I'm now done restoring my backup and all music/apps, and it seems to have gotten rid of an issue where landscape viewing photos or photo folders froze the screen/touch. This was easiest to test since it appeared every time for me. It may have gotten rid of (some of or all) the other issues too. Non responsive keyboard when writing in landscape, screen flickering black when rotating, or my favorite; recording an audio message when rotating text screen... to mention some. I'm sure there are many more I hadn't seen.
To do this you need iTunes on a computer, and preferably a full updated backup of your phone. Backup passwords and secure stuff by encrypting the backup in iTunes (option on iPhone summary tab). Transfer purchases is a good idea to not have to re-download apps etc. Also manually or with other software sync or backup your photos/videos taken with your device (iTunes does not sync this). I do this by accessing the phone storage directly in Windows 7, it appears as a unit in My Computer. Similar ways in different OS:s. After backup is done do following (will wipe phone of all data, need to have SIM card PIN and everything afterwards):
EXTRA NOTE if you have SLOW-MO VIDEOS: you may need to save your pictures/videos to iCloud for the slow-mo vids to work in slow motion after all this. Just a heads up.
1. Completely shut down phone by holding sleep button until you get option to drag on screen to shut down. Wait 30 seconds just to make sure it's fully off.
2. Hold down home button on iPhone, while plugging the USB cable into your computer (may need to have iTunes running if it does not auto-start correctly). Do not release home button until you get an iTunes logo on the screen.
3. In iTunes you should now see a message about updating and recovering your phone. Follow the instructions. After it's fully complete (phone appears in iTunes again and no action is happening in activity window in top of iTunes) you can eject the phone and take the USB cable out.
4. Set up your phone again as if it was new, enter you SIM card PIN, WiFi-password if needed, iCloud etc. At one point it wants to either be set up as a new phone or restored from a backup. Either iCloud or iTunes. Select iTunes if you have followed this. Plug USB cable back in. Follow instructions in iTunes, select the backup you made earlier. Enter password if encrypted.
5. After restore is done it should sync with iTunes (manually select sync if it doesn't) to restore apps/music/books and everything else checked. Except camera photos, which works differently. This may take some time depending on how much data there is. Expect anything from 10 minutes to over an hour. Progress shows in iTunes at the top. Also, this is a good time to untick some apps in the app tab in iTunes under your phone, that you do not use any more. I'm guessing there may be some old ones. If you happen to want some of them again you can always sync it or re download it later again (and things you buy is linked to your account, you don't have to pay twice).
6. Not sure about the camera pics/vids. Seems the official way to do it is to always use iCloud for photo-storage. I don't do this, so this is what I did. To get the pictures/videos back on the phone make sure you have all the pictured/videos you want to sync back to the phone in one folder on your computer. Everything in this folder will get synced, so if you have other junk there, create a new folder first for the sync and move the photos/videos you want synced there. A parent folder to sync with sub-folders for different albums may work, but I haven't tried it. Then select that folder in iTunes, your phone and the Photos tab. I checked "Include videos" too. Apply at the bottom so it syncs. THIS DOES NOT SEEM TO WORK FOR SLOW-MO VIDEOS however, as they get bumped back to regular speed when synced back. I'm sure they still are 120/240 FPS, only played back wrongly. I would call this a software issue from Apple that needs to be fixed. Maybe it can be fixed with a paid sync app or something, I'm not gonna bother with it now.
7. Hopefully enjoy iOS 8.0.2 without the MANY INCREDIBLY BAD BUGS that was in the initial release.

Lines around type and other type/text problems in Dreamweaver CS3

Dear Dreamweaver forum:
Good news/bad news,
First the good news…
My thanks to a forum member by the name of Mylenium. With Mylenium's advice I have improved my halo problem by including a black background when I save type in Illustrator CS3 as part of importing it into Dreamweaver CS3.
However, the bad news, is that I’m still having type and text problems.
Problem area 1
Now, in Dreamweaver, I’m getting lines appearing around the type.
I am dragging and dropping the .gif type file into a Dreamweaver Div Tag.
How do I get rid of the lines around the type so that they do not show up in the Safari browser?
(Please see below)
Problem area 2
I cannot drag and drop text from a Word .doc file into a Dreamweaver div tag.
I also cannot copy and paste Word .doc text into a div tag.
How do I include text on my webpage without having to manually type it in?
(Please see below)
Any help would be appreciated. Thanks!
From within Dreamweaver CS3, how do I place text? Dragging and droppign the file does not work.
This is screenshot of what I see so far when I use Safari to test what I have made so far in Dreamweaver CS3.
I get lines around type.........not usually a good thing.........How do I fix it?
The way I created the portfolio type in IllustratorCS3 using the File > Save for Web and Devices. I then imported the resulting .gif file so that it was within my root folder within the Files panel within Dreamweaver CS3.
Am I doing this right?

Hi
The problems you are experiencing with the image text, (why are you using image text, these days?) is probably cause by the image having a border when created in illustrator, or the image size being set incorrectly.
As for the word text if you are using windows, see http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ce6.html.
On the mac it is a little more complex, save your word doc as html, then apply the 'clean up word html files', (see - http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ef5.html) copy the relevant text and mark-up from the word html file, and paste into your html document in the required position.
PZ
www.pziecina.com

Workaround for the Fade/Appear blocky text problem in IE

Just wanted to share with folks a workaround for the IE
"blocky text" problem that you see when using Fade effects like the
one used in this example:
http://labs.adobe.com/technologies/spry/samples/data_region/DetailRegionEffectsSample.html
It turns out if you set the 'background' CSS property on the
element you are fading, that IE properly renders the text. So to
fix the effects sample above, all you would have to do is modify
this CSS rule in the file to place a background color on the
description region to get things to look good in IE:
#description {
opacity: 0;
filter: alpha(opacity=0);
background: white;
So if folks have been avoiding the use of effects because it
makes things look terrible in IE, you now have a workaround.
--== Kin ==--

I was using spry's AppearFade effect to transition between
"slides" in what equates to a viewstack that I created.
Then I noticed that it would take bold text in IE and make it
look all smudgy or blurry.
Well, after working on it for a while, I got to thinking,
"This problem is specific to text rendered in MicroSofts
browser"... "Hmmm, I wonder".
So, I tried using this style rule: [ font-family:"MS Sans
Serif",Arial, Geneva, sans-serif; ].
Lo and behold, feed the stupid MS browser an MS font and it
does not blur the text.
I just wanted to get this our there. Because someone might
want to solve this in a way where they don't have to set a
background color...

E6 Big Texting Problem

Can anybody help me out with this problem?
My E6 has developed a texting problem, whenever I send a text none of the text appears in the conversation speech bubble, just the date or time when it was sent and the character "0". Does anyone know why?
Thanks
Solved!
Go to Solution.
Attachments:
Text.jpg ‏1560 KB

Would suggest that you backup E6-00 using Nokia Suite, then reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Perhaps restore contacts only and try out texting/conversations before restoring device any further.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia C3-00 texting problem.

Hello everyone, this is my frist post on here. So i bought the nokia c3 and unlocked it from the vodafone network. I use my 02 sim now. I just discovered something that annoys me and need help getting rid of it.
My problem is that after every text send the phone virbates letting me know that i have sent the text and my balance comes up. how do i change the settings so that this doesn't come up. Really annoying as i've just got a new number and sent out a mass text to everyone. The phone vibrated for like 2 minutes straight!!
Any help greatly appreciated. Thank you.

At the phone store where I bought the Nokia C3 they removed the Vodaphone presets ( since I have another provider ) and they also updated my phone with the latest software available ( see below ).
But now I have a serious texting problem!
If you type the Q you get an A , a=q , z=w and w=z .
Also after you typed something and you delete the text and reopen the textbox again this word will reappear on a blue underscore?? Anyone any idea what's happened or had the same problem??
The phone's update info:
C3-00
V04.45
04-08-10
RM-614
Variant: 00.00
Vitual variant: No Virt. Var.

Text Problems in Safari 4

Just this morning I started to experience bad text rendering problems in Safari 4. I am seeing text that overlaps on other text, text that leaves a button and crosses over into the space next to it, text that is truncated on buttons, image alignment problems, and more. Typing in text boxes is a problem, too -- the cursor doesn't display at the point where text is actually being inserted, but several characters off.
It doesn't affect every site -- Google and Netflix look OK, while Apple and Facebook are strongly affected to the point of being almost unusable. Firefox and Chrome on the same laptop are working fine. Other programs on the system, like TextEdit, are fine, too. I have tried changing the default font preferences in Safari, but while the text size changes on certain pages, the overlapping text problem isn't helped.
I have screenshots of the issue -- how do I post them?
Does anyone else see this issue? Many thanks for your opinions and advice?
Safari Version 4.0.3 (6531.9)

Where did you get 67 errors? http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.totallybarbado s.com%2F shows the only error is the "pre" tag which are necessary hacks for formatting the "pre" tag. The other "warnings" are no different than checking apple.com http://jigsaw.w3.org/css-validator/validator?profile=css2&warning=2&uri=http://w ww.apple.com
They also do not assign background-color to "every" css element. Why would you (to bloat CSS)? So, there is exactly "one" error which is well documented and is supported in CSS2.1 when released.
The problem is that Safari does not adhere to white-space or "pre" tags (preformatted text). This has been an ongoing problem since it's incarnation. All other browsers (FireFox, Netscape, IE, Opera, Mozilla..etc) do. http://www.w3.org/TR/1998/REC-html40-19980424/struct/text.html#h-9.3.4
edited: Sorry, had to edit as this forum software actually rendered the <"> tags (without quotes)

Weird texting problem

I have a Z1s running 5.0.2 and I'm not a big texter. I'm using the stock apps for texting and contacts. I was trying to send a text to someone I had never texted before. I brought up their contact page and pressed the little text icon and I got a texting screen except that it was covered by a menu that had options like 'add video', 'add picture' and a bunch of others that prevented me from actually being able to text. The options did nothing and the back arrow also did nothing, so I was prevented from composing and sending a text. I sent the text I needed to from my desktop using mighty text. When I received a reply, I was prevented from reading it by the same menu which still did nothing. That was yesterday. Today, the menu was gone and I could read the return text. For a while though, I was prevented from reading any other text I had received. I would press on one and the first one I looked at came up instead. Then that went away after a while and things seemed to have returned to 'normal'. I really don't understand what is going on with my phone. I like the phone and I love the battery life, but this bit of weirdness and the fact that some apps that worked just fine on my N4, don't seem to work at all on the Z1s. I have an app named Move that counts your steps during your day. It worked just fine on my N4, but on the Z1s it's only counting maybe 1-3% of my steps. It says I walked 89 steps yesterday and that is absurd. I assume that the app uses the accellerometer to do its work. I have another app that uses the gps for tracking and it's not registering anything even though the gps seems to be functioning. And the phone doesn't have as good a connection during calls as my N4. I get a lot of static and breaking up during calls that I never got on my N4. 99% of my calls are made and received at my home, so that is what I'm comparing. Anyone have any clues as to what is going on here? The update to lollipop was done through the pc connection. Any additional updates have been done OTA. I haven't rebooted in a while and I think I'll try that first. TIALT

The texting problem has gone away for a while, so I can't take a screen shot. I loaded the suggested messaging and google fit. I don't like changing apps if what I had worked under lollipop on my N4 and now that I have the Z1s also running lollipop they don't. It seems to me that Sony must have something to do with this problem. Either the hardware or the software (os) is significantly different (inferior). The gps tracking app I'm using is called Bubbler. I tested it today and it only registered my location a handful of times instead of the every 5 or 10 minutes like it's supposed to. To me this indicates that the gps is not functioning properly. The phone and the sim card are about a month old and it came as a micro sim. I don't mean to be a whiner, I'm just confused and disappointed that things are not functioning as I expected. And on top of all that, the call quality is less than stellar. SorryLT

Keyboard not resposive iphone 6 landscape texting

Hi i have recently upgraded to the iphone 6 and i am finding the keyboard slow sticky and even frozen at times while using it to text in landscape mode. I am not sure if it just the buggy ios8 or the phone. i was wondering if anyone else has had similar problems.
i was playing a lanscape game and has to repeat tapping a few times hence why i thought it moight be the phone not just the ios.
thanks in advance
latest iphone with 8.02 installed

I was hoping to see if more people had this problem if it only me maybe i should take it back to the shop and possibly change my phone. If it is a ios 8 problem changing the phone wouldnt make anything different..
thank you in advance

Crystal Report 2008 export to text problem

Hello,
I am using Crystal Reports 2008 for generating reports in our WPF application. In this application, we are exporting the report to txt file on a button click. Now the application contains a form called u2018Print Manageru2019, through which the user can print the exported report(text files). Now the issue, when we try to the any of the exported report file through the application, the printer leaves alternate blank pages. The printer used in this case is DOT MATRIX EPSON LQ-1150II ESC/P2. We even tried printing the text file on HP Laser jet 4600, but the same issue is faced.
Also, please note that when I try to read the exported txt file, a formfeed(u2018\fu2019 page break) character can be seen at the place where the printer leaves a blank page. Hence, my concern is, Is there any property of crystal report that I am missing on or is this a printer driver issue? But if it would have been a driver issue, then changing the printer might have solved the issue.
I also tried doing u2018Keep Togetheru2019 property = false of all the sections of the report. Also, I found that the u2018New Page Afteru2019 property = true and disabled for the u2018Page Footeru2019 section. So I set u2018New Page Afteru2019 property = false programmatically as
rdTest.ReportDefinition.Sections["Section5"].SectionFormat.EnableNewPageAfter = false;
but no luck.
If anyone has faced similar problem or have any clues, please help!
Any kind of help in solving this issue will be highly appreciated.
Thanks in anticipation!

Good morning.
We've got something to get straight first
When you say "...from the Report Viewer. The report printed as expected on HP printer...", do you mean the viewer of the .NET app, or the viewer of the CR designer?
And version 12.0.0.683, is very old (well as far as CR is concerned anyhow ). That version is SP 1, we are now on SP 2. So that will be the place to start. Get to SP 2 which can be downloaded from here;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek

Photoshop CS4 Trial Bugs - Eraser & Text problems

Hows everybody doing...I recently downloaded the Photoshop CS4 Extended Trial and installed it on my computer...I am noticing some bugs and im not really sure if its just a bug in the trial version which will be fixed when i buy the program or if there was an error with the install...
I dont have screenshots at the moment since im not on the computer having the issue but i can get them if needed...
First lets start with the eraser tool...When i set the eraser tool as a size of say about 10px it works fine...However, if i zoom in on the image above its nautral size i start to lose the eraser...When i say lose the eraser i mean you can no longer seen the round area which will be erased..When you zoom in part of the circle disappears...It will still erase and area of the set size but its sort of hard to do erasing on detailed images when you cant see the whole eraser....
More bugs with the eraser....If i set the eraser to a larger size, say 30px or more, i right off the bat start seeing less of the eraser area....It will go from a whole circle down to something like a half moon with only half the circle being displayed...
This may be a little hard to understand so if need be i will get some screenshots of what im talking about later....
I am also having a problem with the text...For starters, i cant scroll through the text...When i enter text and highlight it and highlight the fonts i would expect to be able to scroll through the fonts while watching the actual text change on thet screen....I am unable to do that, i highlight the text and the fonts and CS4 will let me scroll maybe 4-5 fonts and then it just stops and wont scroll anymore...
Another issue im having with the font is the size....Whenever i enter text it is extremely small...Even if im working with a 200px x 200px image if i set my font at say 75px its tiny, tiny enough to where i cant even see it to highlight it....There appears to be something wrong with the sizing of the text...Just to get text to show up normally, at a readable size, i have to set the font size to 800px+ and this is on images which are only like 600px wide and 300px tall...Usually a font of 800px would fill up this image but when i do it the 800px font shows up like a 36px font...
Like i said if this is all to hard to understand i can get some screen shots later on...I wanna make sure this is something which can be fixed before i go ahead and drop 700+ on the program...

Yes i installed the patch...That was the first thing i did, before checking the video driver...The patch didnt fix any of the problems im having...The video driver update did however fix the eraser/brush issue...
I did what you said in post #1 about un-checking the option listed....When i did that nothing changed for me....
I have some more details about the scrolling issue though....From what i am able to find it seems that if i just enter digits i am able to scroll through the entire list of fonts and see a live preview of every single one....
With any sort of text it will only allow me to scroll through 5-6 fonts...You can see that it wants to scroll more when i hold the arrow down cause you can see the blue hightlight flashing and the words trying to change but it just wont go any further...At times when i hold the arrow down to scroll through the fonts it will scroll through 5-6 and then all of a sudden just go white and wont let me scroll up or not...At that point i have to select the font list and pick a font

SMS text problem

Please, I really need help on my phone.I was using a blackberry 8220 and was always encountering problems when i send sms text messages,the is always a clock display in red.may not be able to send messages not until i switch off the phone,remove the battery for a few minutes and replace before i will be able to send sms texts.i just got a blackberry bold and am encountering the same problem.Every other moring,i need to switch the phone off,remove the batteries and leave for a few minutes,then replace before i can send sms texts.Is this problem peculiar to my phone or a setting on my phone or do i need to format my phone and restore to factory defaults?I seriously need help on this.Would appreciate a detailed help.
Thanks in anticipation that i get a response soon

Welcme to the cmmunity supprt frums
Hello, try this link and go down to "solution" and see if it helps any.
Help with sending SMS
Nurse-Berry
Follow NurseBerry08 on Twitter

Curve 8530 SMS Text Problems

My Curve 8530 will receive and send SMS texts ok for a while. Then, for no reason, I cannot click on an sms and open it. It will not show the previous texts. I cannot open the txt to make a reply. I took this to Verizon, he checked it and said there was definitely a problem, of course didn't have another phone, so ordered me one. A few days later I got a new (or probably refurbished) 8530. It's doing the same thing. So this is either a defect in the phone line or in the software for SMS text messages. I am very disappointed with Blackberry. I have had several of their phones, try to keep up with the newest technology even though it always costs me hundredes of dollars for the phones. I think this will be my last. If I cannot get this problem resoloved, I am switching to AT&T.

I got two of these phones and they both are doing it. I do a significant amount of work related texting on my main line 8530... I have to pull the battery anywhere from 5 to 10 times per day. I have contacted Verizon and I'm sending these 8530s back and replacing them with what I had before; the MUCH better, more professional and stable 8330.
I used my 8330 non-stop for 3 years. Never once had a problem with the trackball (Verizon told me the 8530 fixed the trackball problem---???)... Additionally, in the 3 years of using my 8330 non-stop, I may have had to pull the battery twice, from a lock up. Both times it was when I was actively using Internet, teathered to my laptop and an incoming call came. When I'd answer it, the call would work and when I'd hang up, the phone would crash...
The 8330 sold me on the Blackberry OS... The 8530 acts more like a Windows OS, IMHO.
A very dissatisfying experience.

Text problem ID CS4

OK I have created a simple products spec sheet in ID then I export it to a pdf and it turns most of my text into little squares basically like text place holderd rather than my actual text. Can anyone help me out? The one I made prior to this didnt give me this trouble but this one is. I have remade it 3 times now and I keep getting the problem.
Thanks in advance for any help.
BMW

I really like FontExplorer.
http://www.fontexplorerx.com/download/
The free version is good enough for me. (Turn off updates and don't bother with the plugins.) You can group fonts by project and add comments to individual fonts (very useful if you want to find all your "handwriting" or "pro" fonts).
It will also show you whether the font is a system font or if your postscript fonts are broken, and it will let you toggle them on and off.

For iphone 4gs, i was wondering when they will send out an update that will finally fix the stupid text problem. When ever i open my textes, sometimes it would spaz put or something and wout take 2-3 minutes just to finally be able to see my text

I would go to my textes and it would take about 30seconds and then crashes, i would close the phone go back and it fail to open again then my phone and the imessages would spaz out. Its really frustrating. I do hard resets and everything but nothing fixes it. When will there be an update that fixes this problem? Plus there are times when i press to close my phone but it doesnt close, i try pressing multiple times after waiting a while a little bit later, it then closes....

There is no such thing as an iPhone 4GS.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the problem is resolved.
If these steps fail to resolve the issues, take it to Apple for evaluation.

Landscape texting problem

Similar Messages

Maybe you are looking for