Language settings for shared elements

I am encountering some problems that most probably are language related with items and custom attributes.
We have installed both Norwegian and Swedish, and the shared elements page group has activated translations. All my custom attributes were default set to enable translations, but I want to disable these as we won't need this yet. When unchecking the enable translations option I get a warning stating that all attribute values not related to global languages will be lost.
What does this mean? I really need to see som documentation as to what happens when translations are applied.

You don't need to remove the setting from the attributes. Just make the languages unavailable in the page group properties. That will effectively disable the translation feature for the unavailable languages in the page group.
The "Enable Translations" property means that a different value for the attribute is allowed for each language. If translations are not enabled for an attribute, the value of the attribute is identical for each language.
For example, say you have an attribute called CONTACT, in which you enter an email address. If translations are enabled, each translation can have it's own CONTACT. If translations are not enabled, updating the CONTACT attribute for any language will update the value for all languages.
If you remove the "Enable Translations" property for an attribute, the value of the attribute for each language will revert to the value for the default language. However, please test this before you do it to an attribute that is widely used.
What else did you need to know about translations?
Regards,
Jerry
PortalPM

Similar Messages

Regional and Language Settings for Window and BEX Style

Hi All,
When I change the Regional and Language Settings for Windows, Standards and Formats value to English (USA) the standard Style for BEX is active. For instance, input-ready cell is bordered with blue. But when I switch to Turkish this style is not active.
Additionally, I have to change Style for each Workbook one by one. How can we adopt a style to every workbook.
Regards,

Lars,
This is a setting on the 'Defaults' tab in the User Profile. This can be set when a new user is set-up in SU01, or it can be changed by each user according to personal preference in SU3. I'm sure there is a system table where these settings are stored that could probably be edited for all users, if that is desired, but I don't know which table that would be off the top of my head.
Hope this helps...
Bob

Language settings for movies

Hello,
I live in Switzerland and have a Swiss Credit Card but unfortunately speak neither French or German. When I try and buy movies I can only buy them in French or German! This for me and I'm sure many other people is a bit of a pain since the movie I'd like to see is in a language I can't understand. Is there any way I can buy/rent a movie from you in English with out changing my billing details to a UK/US credit card which I don't have?
Many thanks

Hussein,
I tried to follow the instructions described in the mentioned docs:
* Create additional procedure in my package:
procedure Set_Ctx_Lang_Attr (p_Language_Code IN VARCHAR2) is
begin
DBMS_SESSION.SET_CONTEXT( 'USERENV', 'LANG', p_Language_Code);
end;
* Granting priviledges connect, resource, dba to the user.
* Execute this new procedure in SQL Developer just before executing procedure that references view MTL_SYSTEM_ITEMS_VL.
But it doesn't work yet. I still get an error message indicating missing priviledges. Any idea?
Apart from that, when calling the corresponding web service later on, is it correct that language settings are handled automatically by Service Invocation Framework with Web Service Authorization? So USERENV('LANG') (verified in MTL_SYSTEM_ITEMS_VL) is automatically set in dependence of Web Service Authorization - right?
Thanks,
Carolin

How do I get back to default settings for photoshop elements edit

How do I get back to default settings of photoshop elements 9 for edit. I tried to edit one picture and now all of my pictures are discolored.

Quit the editor, then restart it while holding down ctrl+alt+shift (cmd+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

How to save view settings for shared library

Just wondering if there is any way to have iTunes remember the view settings for a shared library? The library is shared through home sharing. I can change the view settings for TV Shows so that episode number etc is displayed. However, this change is lost when itunes is restarted. This is for latest iTunes on windows 7.

Hello
Whats the selectBooleancheckbox bound to ?
ps. Please indicate the technology stack you are using ex. Jdev 11g ADFBc / EJB ....
Regards
Paul

Problem in language settings for Conversion of "." [dot] to "," [comma]

Hi Experts,
                We have a requirement to change the default decimal notation from one user language to other user language. For instance the decimal notation for Dutch language is ","[comma] , we need to change this notation to "."[dot]. Whenever user put a comma it should be treated as dot. In R/3 ,In SU01 Transaction we are able to change the decimal notation etc.Is there any possibilities to achieve this in portal content development.
Message was edited by:
        Ramanan Panchabakesan
Message was edited by:
        Ramanan Panchabakesan
Message was edited by:
        Ramanan Panchabakesan
Message was edited by:
        Ramanan Panchabakesan

Hi Ramanan,
The problem is that the decimal seperator is defined by http://java.sun.com/j2se/1.4.2/docs/api/java/text/DecimalFormatSymbols.html - which is used within the DecimalFormat class; and from the portal applications, this is created with the user's locale.
So there is - as far as I know - no way to change these standard mapping locale <-> format definition.
Hope it helps
Detlev

English language settings for HK

I'm live in HK and I'm only able to read English. On my iphone 4GS and witht he latest OS, whenever I sign in from a site that requires social media such as google plus 1 or FB, it directs my pages to the language of HK which I don't want. Can this be fixed through settings, if so where?
My iphone is setup in English but the region I put as HK SAR

Hussein,
I tried to follow the instructions described in the mentioned docs:
* Create additional procedure in my package:
procedure Set_Ctx_Lang_Attr (p_Language_Code IN VARCHAR2) is
begin
DBMS_SESSION.SET_CONTEXT( 'USERENV', 'LANG', p_Language_Code);
end;
* Granting priviledges connect, resource, dba to the user.
* Execute this new procedure in SQL Developer just before executing procedure that references view MTL_SYSTEM_ITEMS_VL.
But it doesn't work yet. I still get an error message indicating missing priviledges. Any idea?
Apart from that, when calling the corresponding web service later on, is it correct that language settings are handled automatically by Service Invocation Framework with Web Service Authorization? So USERENV('LANG') (verified in MTL_SYSTEM_ITEMS_VL) is automatically set in dependence of Web Service Authorization - right?
Thanks,
Carolin

Language Settings for Portal

Hi All:
How do we will enable translations for the custom iviews that we are developing.
For standard delivered iview when we turn switch for a specific language the headers ( the java labels ) are translated automatically.
Is there special settings in Java that needs to be enabled for translations.
Thanks
Rachel

Hi my friend:
That is an amazing document where you can learn and manage translations in your applications. See to the end of Document... See page 60.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/j-l/jsps resources and internationalization
Good luck!
Josue
PS. Don´t forget reward points.

Language translation for text elements.

Hey ABAP Gurus,
I am having a problem, with translation of text elements in korean language. I have translated the TEs in korean, but they dont appear in ko, they appear in Portuguese...
I have tried using se63, and se80 for the translation...
Am I missing anything here? Please advise!
Thanks Nina.

Hi,
Check out transaction
SE32
Please check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm
Regards
Kiran Sure

Thinkpad SystemUpdate - Language settings for downloaded utilites?

There seem to be slight troubles in the way how Lenovo's SystemUpdate keeps (or does not keep) track of regional, language-dependent settings.
Scenario: Installed a clean Windows (english, non-T61-specific) XP SP2 on a T61, copied and installed T61-specific network drivers and SystemUpdate and then started automatic SystemUpdate search and install.
Problem: SystemUpdate loads and installs mixed language tools and utilities (partly english and partly german) based on facts which I currently can not reproduce. E.g., installed version of ThinkVantage Productivity Center is the english one (as intended), Fingerprint reader utility and some others are all in german. Selected WinXP keyboard layout was german, country/locale set to Austria but I'd prefer to download and install plain english drivers and tools.
Any hint what factors influence on SystemUpdate's decision for a specific language and how I can configure the language for downloads? I do not remember of having seen any language selection option.
tia and best regards
Jo

Jim Simon wrote:
Audition is now included with the CS 5.5 suite.
Jim thanks but as you can see I firstly stated that I have used the Production Premium suite.
My main beef with Adobe being that the most likely area of interest after everything else in Premiere being "native" and fast is that you will have noise artefacts on your audio timeline which you may wish to fix quickly. Of course in FC Pro you could "round trip" out to Soundtrack Pro and take a noise print do other stuff. What I REALLY LIKE about Audition is the spectral display/ability to use stuff like the healing brush it is a much more intuitive way of doing repairs.
This is often the trouble with marketing departments they simple do not understand how things work out in the field.
But once again I wish to congratulate Adobe on their comprehensive metalogging features and the abilities to embed the metadata or separate sidecar method. GREAT WORK!!!

How do I pick the right settings for Premiere Elements 10?

I have Adobe Premiere Elements 10 and want to edit videos that I had received from a company that transferred my Super 8 home videos to digital format and saved them on an external hard drive. They have avi file extension, Apple Motion JPEG A codec , frame size: 1920 x 1080, pixel aspect ratio: 16:9, Frames per second: 29.97. I am not sure what settings to select for the best picture quality. I have tried some and the quality is poor. I need help. Thanks

Unfortunately, you can not edit MJPEG videos in Premiere Elements, Editer.
Actually, some people can. It depends on your machine. But for the most part, it won't go -- and there's no guarantee that even installing that codec will make it. (But you can try. Just install your camera's software -- which sometimes works.)
The wisest solution is to convert the file to a DV-AVI using a program like MPEG Streamclip, as discussed in this FAQ.
http://forums.adobe.com/thread/415317

Language settings for BEX Analyser

Hi All,
I am trying to run a report for which dispalys customer names. The BEX report is unable to recognize Greek letters and displays # instead of that. The same report runs fine on Web.
Can anybody please suggest what additional settings need to be done so that BEx report can identify Greek letters?
Thanks,
Manisha

The problem is solved for greek letter by adding a system variable sap_codepage - 1704. But only one entry can be maitained for this variable. And the report still cannot identify Russian characters.
Is there any way to solve this problem for BEX 3.X for all multiple languages?

Make Default Settings for cost element -OKB2

Hi,
What is the importance of the this process?
Please give your views, I have read the information provided by SAP.
Regards,
Pankaj

Hi
This process is for creating Cost Elements.
We can create Cost Elements in FS00 by selecting Edit Cost Element and giving Validity Period and Cost Element category.
We can create Cost Elements in KA01 also.
In the above 2 processes we can create a single Cost Element only at a time.
If you want to create more number of Cost Elements at a time, then you need to do the Process of Automatic Creation of Cost Elements, Make Default Settings -->OKB2 , Create Batch Input Session -->OKB3 and Execute Batch Input Session -->SM35.
Regards
Venkat

Automating MUI language settings for 10.1.4

Hi
I hoping someone out there can answer this for me.
I am building an SMS package for 10.1.4 I have previously built a package for 10.1.3 which worked fine as far as I remember.
However for 10.1.4 on first startup it always asks the user to set the language. I have mulitple sites with multiple languages and I really wanted Acrobat reader to use the system language as the installation language. I have been through the customisation wizard and the registry and I can't find the switch for this.
The pop up box is very annoying because the default is US English and if the user just clicks yes (Which they tend to do without looking) they will then have English regardless of their natural language. Creating mulitlanguage install versions also relies on applying them to the right collection.
Is there anyway to bypass the the language pop up and go straight for use system for language?
Thanks

Hi Thanks for the reply.
I have been through that section and choose language is deselected, default language is English (US). The next section of the manual explains about setting the registry to use the system language.
2.2.3.2 MUI configuration via the registry
You can configure the application to use the OS language for MUI installers as follows:
1. Navigate to HKEY_CURRENT_USER\Software\Adobe\<product name>\<version>\Language.
2. Create a key called UseMUI.
etc
This works fine with 10.1.0 base with 10.1.3 patch and I get a silent install, users are upgraded and everyone is happy.
However when I do the same thing for 10.1.4 no matter what settings I apply the user is always asked to confirm the language. Allowing for 1 in 10 users to answer the question incorrectly I then have a support headache.
The end game is no popup box for the user. As the MSP is applied after the MSI its settings take preferance and it always seems to ask for the language.
Thanks

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

Language settings for shared elements

Similar Messages

Maybe you are looking for