How do I use the Scintilla control?

Hi All
I'm assuming at least some people on here must have experience of the Scintilla control for creating a Notepad++ type application. I'd like to use this control, unfortunately there is very little in the way of documentation or working examples around
and as such I am totally stuck!
I'm not even going to post any code as I am nowhere near anything worthy of critique. Rather I will just explain what I want to achieve and hopefully somebody will be able to post a snippet of code which will do the job and I can take it from there.
First, I want to control this with code rather than an xml file so that it is easier to adjust dynamically. So, my wishlist is:
1) Create five keyword lists and five styles (just different colours for now). Assign one style to each keyword list so that any word in that list is styled accordingly. The comment prefix is // and comments should be in green.
2) If one of my keywords is, for instance, ScintillaNET and I just type scintillanet, it should capitalize automatically as per the keyword in the list.
3) Where I have multiple keywords beginning with the same letters, I should get a list of possible words come up, much like an enumeration in vb.net.
4) Finally, it would be nice to be able to set the line number of my first line - for instance if I am using pages and I am viewing page 2 I might want to display just lines 101-200 and of course I would then want the line numbers to be 101-200 not 1-100, so
I will want to set the first line to 101.
I dare say that once you know how to use Scintilla the above can all be achieved in little more than a few seconds with just a few lines of code and it will all look really obvious. So it would be fantastic if somebody could help me out here!
Many thanks
Rich

I'm assuming at least some people on here must have experience of the Scintilla control for creating a Notepad++ type application. I'd like to use this control, unfortunately there is very little in the way of documentation or working examples
around
>unfortunately there is very little in the way of documentation
Have you read all of this?
Scintilla Documentation
http://www.scintilla.org/ScintillaDoc.html
>or working examples around
Have you examined this project in detail?
SciTE is a SCIntilla based Text Editor.
http://www.scintilla.org/SciTE.html
SciTE Documentation
http://www.scintilla.org/SciTEDoc.html
- Wayne

Similar Messages

How can I Use the iCloud Control Panel to pick a new folder

I apparently moved or deleted my iCloud folder and keep getting this message Use the iCloud Control Panel to pick a new folder. How do I do this?

I have/had the same problem, just started this morning. I tried a system restore to a known good date. I still had the problem so I rolled restored the system to the latest.
Thinking that it might have something to do with priviliges, I reviewed my user account and noticed it was set to "Administrator". On a whim, I switched my user account from administrator to "standard user" and I'll be... the issue dissapeared. I have no idea why. But I thought I'd pass it along.

How do I use the parental control of my dlink router over firefox?

I have a Dlink DIR-605L router which has parental control. I tried restricting certain websites but it doesnt seem to affect Mozilla Firefox. How do I go about this?

If the router has a way of recognizing Firefox traffic this may be possible?
However there are third party software tools and Filters that can be used for this as well [https://support.mozilla.org/en-US/kb/block-and-unblock-websites-with-parental-controls]
Looking at your router's manual, it may require an application filter? [http://www.dlink.com/-/media/Consumer_Products/DIR/DIR%20605L/Manual/DIR-605L_Manual_US.pdf]

HOW CAN WE USE ALV-CUSTOM CONTROL

Dear Friends,
How can we use the custom control ALV.please provide the sample PPT or material to learn the container ALV.
Thanks &Regards,
Rajkumar.A

SAP released document on ALV custom control. Pretty cool stuff..
http://www.saphelpbykevin.com/saphelpbykevin/modules.php?name=Downloads&d_op=getit&lid=10#dl
Edited by: Kevin Nguyen-Tu on May 14, 2008 7:44 PM

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

How do u turn down the tick volume when using the remote control?

how do u stop the ticking(clicking) when adjusting the volume using the remote control?

Hi philippalldino,
I understand that you do not wish to hear your volume feedback when adjusting the volume of your computer. Here is an article that will tell you how to disable this feature:
OS X Mountain Lion: Turn off the alert sound for volume keys
http://support.apple.com/kb/PH10762
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

How to use the custom control ?

Hi Friends,
plz help to use of custom control in screen painter ?
and how to use the custom control ?
Thanking you.
Regards,
Subash.

HI,
Screen Elements
A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
You can use the following elements:
·        Text fields
Display elements, which cannot be changed either by the user or by the ABAP program.
·        Input/output fields and templates
Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
·        Dropdown list boxes
Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
·        Checkbox elements
Special input/output fields that the user can either select (value X) or deselect (value SPACE). Checkbox elements can be linked with function codes.
·        Radio button elements
Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
·        Pushbuttons
Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
·        Frame
Pure display elements that group together elements on the screen, such as radio button groups.
·        Subscreens
Area on the screen in which you can place another screen.
·        Table controls
Tabular input/output fields.
·        Tabstrip controls
Areas on the screen in which you can switch between various pages.
·        Custom Controls
Areas on the screen in which you can display controls. Controls are software components of the presentation server.
·        Status icons
Display elements, indicating the status of the application program.
·        OK field
Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
with regards,
sowjanyagosala

How to use the remote control in MediaSource Audio Play

Hello,
I bought myself the Creative X-Fi Elite Pro.
I found out that I only can use the remote control in Media Center of the software.
Now I want to use it in the Creative Audio Player whicht was also in the Box.
Is there a way?

Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
Just my two opinionated cents...

How do you use the status column to show progress of a step in an OI?

Hi everyone,
I was just doing a little browsing and noticed the picture at the top of the http://www.ni.com/teststand/ web page. It shows a progress bar in the status column of a step being executed.
I have several applications where this would be a very useful addition. I use the progress bar at the bottom of the OI and sequence editor regularly, but would very much like to show progress of an individual step in the status column. It would be particularly useful where you turn the tracing off into a sequence but want to see that progress is being made through the steps within it...
Anyone know how to do this? I have been unsuccessful in trying to find examples....
Cheers,
Barry

James,
I believe your answer to Bazza's question also applies to my situation, but I wasn't sure so I thought I would ask. I am working on a custom TestStand operator interface in LabVIEW using the UI controls. I would like it to behave as closely as possible to the old Test Executive. Specifically, I would like the operator to be able to see the contents of the sequence file, interact with them, and see the execution results all in the same view. Is that possible? In other words, can I display and interact with a sequence file (display the sequence steps, run selected steps, loop selected steps, etc.) and display the sequence's execution results (including tracing) in the same SequenceView control or do I have to use 2 of them?
Thanks,
Ryan Wright

How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

This message refers to the VIs found at this link:
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

How can I use LabView to control Altera Scripting

Hi
I have kind of run into a stone wall. I am building a production test executive based on LabView. Part of this process includes loading an FPGA image on to a CFI flash that is in the JTAG chain. I am trying to make so that the production operators don't have to open a second application, select the right FPGA and Flash navigate to the file then load it, then go back to LabView and run the rest of the tests.
Altera has a command line interface that will let me load .cdf file. The problem is that nowhere in Altera’s documentation does it show me how to first load the “Parallel Flash Loader IP” into the FPGA. The flash loader acts as a temporary bridge between the JTAG input and the CFI Flash. I have looked on Altera’s Forums and have had an open ticket with Altera’s support engineers for more than a week.
I can’t be the first person to want to do this; I am hoping someone here has done it before. I would really rather not try to use the activeX controls to manipulate the windows based program.
Any suggestions would be greatly appreciated (Note I am not trying to put LV code on the FPGA/Flash just use LV to control the process)
Thanks in advance
Below is the error message and the script I am using. It almost works just missing the flash loader IP
C:\altera\12.1sp1\qprogrammer\bin>quartus_pgm -c USB-BLASTER -m JTAG S_FPGA.
cdf
Info: *******************************************************************
Info: Running Quartus II 32-bit Programmer
    Info: Version 12.1 Build 243 01/31/2013 Service Pack 1 SJ Full Version
    Info: Copyright (C) 1991-2012 Altera Corporation. All rights reserved.
    Info: Your use of Altera Corporation's design tools, logic functions
    Info: and other software and tools, and its AMPP partner logic
    Info: functions, and any output files from any of the foregoing
    Info: (including device programming or simulation files), and any
    Info: associated documentation or information are expressly subject
    Info: to the terms and conditions of the Altera Program License
    Info: Subscription Agreement, Altera MegaCore Function License
    Info: Agreement, or other applicable license agreement, including,
    Info: without limitation, that your use is for the sole purpose of
    Info: programming logic devices manufactured by Altera and sold by
    Info: Altera or its authorized distributors. Please refer to the
    Info: applicable agreement for further details.
    Info: Processing started: Thu Oct 03 18:16:53 2013
Info: Command: quartus_pgm -c USB-BLASTER -m JTAG S_FPGA.cdf
Info (213045): Using programming cable "USB-Blaster [USB-0]"
Info (209060): Started Programmer operation at Thu Oct 03 18:17:19 2013
Error (209062): Flash Loader IP not loaded on device 1
Error (209053): Unexpected error in JTAG server -- error code 5
Error (209012): Operation failed
Info (209061): Ended Programmer operation at Thu Oct 03 18:17:21 2013
Error: Quartus II 32-bit Programmer was unsuccessful. 3 errors, 0 warnings
    Error: Peak virtual memory: 376 megabytes
    Error: Processing ended: Thu Oct 03 18:17:21 2013
    Error: Elapsed time: 00:00:28
    Error: Total CPU time (on all processors): 00:00:03
Solved!
Go to Solution.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

How do you use the ATV with the remote when you place it out of sight?

I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
Thanks.

Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

How do I use the Scintilla control?

Similar Messages

Maybe you are looking for