Large Message Payload - Queue selection

Hi,
I have one message with payload size around 105MB when I am trying to send through XI this message gets failed in the queue (inbound) of integration engine saying some memory problem to process the message. I have seen the queue it is picking up some XBT09_000 but I want to use the queue XBTL* as this queue is for large messages. The whole thing is that when my message is around 100MB I want it route large message processing queue i.e XBTL*. Is there anyway to do this? Any help on this greatly appreciated.
Thanks.,
Daniel.LA

There is a way to defer large messages from the rest and process them using a job in a specific queue.
Please check this configuration :
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a><a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/14/8024">Message Selection Filter</a>
in this path:
Under Runtime - > Integration engin ->
Prioritized Message Processing
Queues for Prioritized Message
Good luck
Nimrod

Similar Messages

Processing large message payload with weblogic JMS

Hi,
I have a requirement in my project to process 50MB-500MG-1GB file using the JMS queue.
We could able to process 50MB payload but it's talking almost 2-3min to post the message and 2-4min to consume the message. Are there any configurable parameters available to fine tune the JMS queue to handle large payload? or is there any limitation on the size of the queue to process ?
Please advise.
Thanks,
Sri

There is a way to defer large messages from the rest and process them using a job in a specific queue.
Please check this configuration :
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a><a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/14/8024">Message Selection Filter</a>
in this path:
Under Runtime - > Integration engin ->
Prioritized Message Processing
Queues for Prioritized Message
Good luck
Nimrod

TS2755 Imessaging app is hung and application closes. large message in queue. Restarted didn't help.

My kids were emoji bombing each other with iMessage. now application is hung up. Tried closing it, restart phone, turn on and off I messaging and Sms messaging in settings. Deleted photos to make more room..,
I just have a blank screen in message and then the focus shift off the app. Please help!

Hello 123Beth,
I suggest backing up and restoring the iPhone if iMessage keeps quitting unexpectedly.
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
All the very best,
Sterling

Replace message payload object without remove queue table

hi,
i want to replace message payload object without remove queue table but i have got the "ORA-02303: cannot drop or replace a type with type or table dependents" error.
is there any way to replace message payload object without remove queue table?
Click to link below to find a demo which is explain the problem clearly
Replace message payload object without remove queue table
Regards.

Hi
I answered this in Re: Replace message payload object without remove queue table forum.
Cheers, APC

Edit message payload object without remove queue table

Hi, need ur help again,
Known that if we want to modify a message payload attribute (add,edit or delete), we will fail to do so if the message payload is used by existing AQ's queue table.
How to change the message payload object without remove the queue table?
Thanks!

Hi
I answered this in Re: Replace message payload object without remove queue table forum.
Cheers, APC

Message payload logging for Uniform Distribute Queue

Hi All,
We have a requirement to log the message payload, of every jms message received in a Uniform Distribute Queue in Weblogic.
Please let us know how can we achieve this.
Thanks.

If you want to avoid use of the Path Service, then the alternative is to make the destination members highly available. This will help ensure that the host member for a particular UOO is up.
One approach to HA is to configure "service migration". For more information see the Automatic Service Migration white-paper at
http://www.oracle.com/technology/products/weblogic/pdf/weblogic-automatic-service-migration-whitepaper.pdf
In addition, I recommend referencing Best Practices for JMS Beginners and Advanced Users
http://docs.oracle.com/cd/E17904_01/web.1111/e13738/best_practice.htm#JMSAD455 to help with WL configuration in general.
Hope this helps,
Tom

Set Message Processing Queue based on input payload

Hi all..
Can i set the message processing queue from graphical mapping?
Receiver system in my scenario is ECC.Whuile sending messages to ECC, i need to send the message related to a particular ORDER Number in a particular queue.
for EX: if ORDER Number from my input payload is 457 i want to set the queue as ABC457.
Please let me know how to get it done from mapping or if there is any other approach.
Thanks
Manohar

Hi Ram,
What do you mean by Queue here?? we can check condition in mapping level only based on ORDER Number we can send message to receiver.use enhance receiver determination.
Regards,
Raj

Large Message picking Wrong Queue.....???

Hi,
     We are processing a large message of size around 50 MB and its going to queue XBTO9. But i want it to be processed through XBTM.
Can someone please reply of how can it be done.
Thanks
Sourav

Its in KB...
Parameter EO_MSG_SIZE_LIMIT
Meaning
   The parameter EO_MSG_SIZE_LIMIT enables you to process messages of a
   particular size in series. This applies for messages with the quality of
   service Exactly Once (EO). If the message is larger than the parameter
   value, the message is processed in an extra queue.
   The prefix for the outbound queue of the Integration Server is XBTM, for
   all others it is XBTL.
   This parameter is designed to improve performance since there is not
   usually enough memory to process multiple large messages simultaneously.
   Serial processing ensures that the main memory only has to process one
   large message at a time, while smaller messages and processes continue
   to be processed uninterrupted.
Possible Values
   0 - 2,097,151 (KB)
   Note: 0 means deactivated (no messages are processed in an extra queue);
   the maximum value 2,097,151 corresponds to the value of roughly 2 GB.
Nilesh

JDBC Adapter: J2EE server crashes while sending large messages

We want to use the following scenario to transfer data from a MS SQL Server to SAP BW via XI:
JDBC Sender Adapter XI SAP ABAP Proxy.
All works fine with a small amount of data. But if the select statement delivers too many record sets and the size of the transformed XML payload is greater then 50 MB the J2EE server crashes. A complete restart is necessary. It seems to be am memory problem.
Here are the entries from our log files:
dev_server0
[Thr 6151] Mon Jul 24 12:46:57 2006
[Thr 6151] JLaunchIExitJava: exit hook is called (rc=666)
[Thr 6151] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 940893 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 6151] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 6151] JLaunchCloseProgram: good bye (exitcode=666)
std_server0.out
FATAL: Caught OutOfMemoryError! Node will exit with exit code 666java.lang.OutOfMemoryError
Is this a general problem of the XI or a specific one of our configuration? Is it possible to transfer such large messages via XI? If not, is there a workaround for such scenarios?
(Memory heap size of the J2EE server is 1024 MB.)

> Hi Gil,
>
> i had nearly the same problems some times in praxis
> and the mapping was the reason. Just change your
> interface determination temporary, delete the mapping
> and test again to find out if the mapping is the
> reason.
>
> Regards,
> Udo
I have changed my interface determination so that no message mapping is used. The J2EE server still crashes.
> Hi Gil,
> This does sounds like a memory problem especially
> when it comes to 50M message with a minimum XI sys
> requierments...
> To be sure you can check on the RWB for the
> componnent monitoring at the JDBC adapters and look
> for your adapter
> look at the status of the adapter and the trace
> there...
Hi Nimrod
In case of such an error I have no entries in channel monitor. So I can't see anything there. I have also no entries in message monitor of the RWB in this case. So I don't get any information with standard XI tools.
> My reccomendation to you is to set the poll intervall
> to a shorter period,this way you'll make sure you get
> less records...I hope you have remembered to add a
> status/flag column on the table to be set after
> selection so no duplicate records will be taken on
> the second pools.
>
The problem is that the source of my data is not a simple SQL statement but a stored procedure. So I don't know exactly how many records will be delivered. A update command is not possible.

Not able to get the message from Queue using MQ adapter

HI
Using Mq adapter am able to put the message in a queue and am able to get the message if i select the schema type as opaque, but am not able to get the message if i specify any schema type and am getting timed out exception.
Kindly help to proceed with this issue.

Hi,
Am also facing the same issue.
I would be thankful if anyone can provide the solution

Error while processing message payload Element 'CategoryCode&#39

Hi Experts,
I am trying to integrate SAP ECC with TM. I have transferred the sales order from ECC to TM, but its not triggering order based transportation requirement (OTR) instead giving an error Error while processing message payload Element 'CategoryCode&#39 and all the xml messages are stuck in inbound queue. The screen shot of the issue is as appended herewith. Please advise.
Thanks & Regards,
Aunkur De

Hi Aunkur,
The issue will generally come when a mandatory field in XML which you are not sending either or missed.
Please check if all mandatory fields are mapped properly.
Best regards,
Rohit

How To split large message using File Adapter

Hello everyone,
Here is my scenario FTP > XI > BI.
I got 2 questions:
(1) I am getting large message around 70 MB file.
    How we can split the message into multiple files 10 MB each before processing the file into XI?
(2) Is there is any way we can find out size of file which is on FTP without contacting FTP admin?
    through XI before processing the file?
Thanks
Vick

hi vick,
check the blog
Zip or Unzip your Payload with the new PayloadZipBean module of the XI Adapter Framework
Working with the PayloadZipBean module of the XI Adapter Framework
SAP XI acting as a (huge) file mover
The specified item was not found.
Managing bulky flat messages with SAP XI (tunneling once again) - UPDATED
The specified item was not found.
regards
kummari

NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

Hi,
I think you need to remove the queue. Please try:
    hold down the Windows key and press R.
    from the Run window, type services.msc and hit enter.
    if the machine asks for Admin you have to accept this,
    look down to the print spooler service, right click it and select properties
    click on the Stop button,
    browse to C:\Windows\System32\Spool\printers
    delete the job inside this folder
    reboot the machine
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Drop messages in queue that have a blank sender

I'm getting hundreds of messages in the Queue where the From Address is < >.
Do I just let these build up or is there a setting somewhere that would just drop the message if it has a blank sender?
Here is an example of one that I've received;
Identity: Pebbles\512\21474838371
Subject: Undeliverable: MUST READ: Vehicle's Below Kelly-Blue-Book*
Internet Message ID: <[email protected]>
From Address: <>
Status: Ready
Size (KB): 10
Message Source Name: DSN
Source IP: 255.255.255.255
SCL: -1
Date Received: 5/27/2014 11:51:09 AM
Expiration Time: 5/29/2014 11:51:09 AM
Last Error: 400 4.4.7 Message delayed
Queue ID: Pebbles\512
Recipients: [email protected];2;2;[{LRT=};{LED=400 4.4.7 Message delayed};{FQDN=};{IP=}];0;CN=outbound,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT)....
1 email server in domain; Exchange 2013 sp1/Win2012 Standard
PennyM

On Exchange 2010 you have antispam agents that can help you discard such messages.
Sender filtering has a check box called drop messages with blank senders select that and restart the transport service on the servers to get that updated quickly.
In 2013 server, you have sender filtering as well.

Best practices for handling large messages in JCAPS 5.1.3?

Hi all,
We have ran into problems while processing larges messages in JCAPS 5.1.3. Or, they are not that large really. Only 10-20 MB.
Our setup looks like this:
We retrieve flat file messages with from an FTP server. They are put onto a JMS queue and are then converted to and from different XML formats in several steps using a couple of jcds with JMS queues between them.
It seems that we can handle one message at a time but as soon as we get two of these messages simultaneously the logicalhost freezes and crashes in one of the conversion steps without any error message reported in the logicalhost log. We can't relate the crashes to a specific jcd and it seems that the memory consumption increases A LOT for the logicalhost-process while handling the messages. After restart of the server the message that are in the queues are usually converted ok. Sometimes we have however seen that some message seems to disappear. Scary stuff!
I have heard of two possible solutions to handle large messages in JCAPS so far; Splitting them into smaller chunks or streaming them. These solutions are however not an option in our setup.
We have manipulated the JVM memory settings without any improvements and we have discussed the issue with Sun's support but they have not been able to help us yet.
My questions:
* Any ideas how to handle large messages most efficiently?
* Any ideas why the crashes occur without error messages in the logs or nothing?
* Any ideas why messages sometimes disappear?
* Any other suggestions?
Thanks
/Alex

* Any ideas how to handle large messages most efficiently? --
Strictly If you want to send entire file content in JMS message then i don't have answer for this question.
Generally we use following process
After reading the file from FTP location, we just archive in local directory and send a JMS message to queue
which contains file name and file location. Most of places we never send file content in JMS message.
* Any ideas why the crashes occur without error messages in the logs or nothing?
Whenever JMSIQ manager memory size is more lgocialhosts stop processing. I will not say it is down. They
stop processing or processing might take lot of time
* Any ideas why messages sometimes disappear?
Unless persistent is enabled i believe there are high chances of loosing a message when logicalhosts
goes down. This is not the case always but we have faced similar issue when IQ manager was flooded with lot
of messages.
* Any other suggestions
If file size is more then better to stream the file to local directory from FTP location and send only the file
location in JMS message.
Hope it would help.

Large Message Payload - Queue selection

Similar Messages

Maybe you are looking for