Large text

First of all i apologise if this is in then wrong section but i wondered if there is anywhere that i can set a large text so when i go into things like email ebay etc the text is large without me using the command key
looking forward to your answers
eon

Peter,
Yes, a poor term, I guess. The only difference I notice upon changing the font size in the Safari preference is, for example, the relative font size of text I compose in Yahoo mail vs. the size of the fonts used in the rest of the Yahoo mail window. Changing the Preference font and reloading a typical web page doesn't seem to change anything here. On the other hand, the zoom in/out control changes everything, and to the point of the original post, there doesn't seem to be a preference for the default zoom. What am I missing?
Update: After more experimentation, no change in displayed font on these discussions with preference change either, but with a Google page, instant change in most of the fonts on the page. So I'm beginning to get it, but the effect seems inconsistent.
Jerry
Message was edited by: Jerrold Green1

Similar Messages

Arbitrary waveform generation from large text file

Hello,
I'm trying to use a PXI 6733 card hooked up to a BNC 2110 in a PXI 1031-DC chassis to output arbitrary waveforms at a sample rate of 100kS/s. The types of waveforms I want to generate are generally going to be sine waves of frequencies less than 10 kHz, but they need to be very high quality signals, hence the high sample rate. Eventually, we would like to go up to as high as 200 kS/s, but for right now we just want to get it to work at the lower rate.
Someone in the department has already created for me large text files > 1GB with (9) columns of numbers representing the output voltages for the channels(there will be 6 channels outputting sine waves, 3 other channels with a periodic DC voltage. The reason for the large file is that we want a continuous signal for around 30 minutes to allow for equipment testing and configuration while the signals are being generated.
I'm supposed to use this file to generate the output voltages on the 6733 card, but I keep getting numerous errors and I've been unable to get something that works. The code, as written, currently generates an error code 200290 immediately after the buffered data is output from the card. Nothing ever seems to get enqued or dequed, and although I've read the Labview help on buffers, I'm still very confused about their operation so I'm not even sure if the buffer is working properly. I was hoping some of you could look at my code, and give me some suggestions(or sample code too!) for the best way to achieve this goal.
Thanks a lot,
Chris(new Labview user)

Chris:
For context, I've pasted in the "explain error" output from LabVIEW to refer to while we work on this. More after the code...
Error -200290 occurred at an unidentified location
Possible reason(s):
The generation has stopped to prevent the regeneration of old samples. Your application was unable to write samples to the background buffer fast enough to prevent old samples from being regenerated.
To avoid this error, you can do any of the following:
1. Increase the size of the background buffer by configuring the buffer.
2. Increase the number of samples you write each time you invoke a write operation.
3. Write samples more often.
4. Reduce the sample rate.
5. Change the data transfer mechanism from interrupts to DMA if your device supports DMA.
6. Reduce the number of applications your computer is executing concurrently.
In addition, if you do not need to write every sample that is generated, you can configure the regeneration mode to allow regeneration, and then use the Position and Offset attributes to write the desired samples.
By default, the analog output on the device does what is called regeneration. Basically, if we're outputting a repeating waveform, we can simply fill the buffer once and the DAQ device will reuse the samples, reducing load on the system. What appears to be happening is that the VI can't read samples out from the file fast enough to keep up with the DAQ card. The DAQ card is set to NOT allow regeneration, so once it empties the buffer, it stops the task since there aren't any new samples available yet.
If we go through the options, we have a few things we can try:
1. Increase background buffer size.
I don't think this is the best option. Our issue is with filling the buffer, and this requires more advanced configuration.
2. Increase the number of samples written.
This may be a better option. If we increase how many samples we commit to the buffer, we can increase the minimum time between writes in the consumer loop.
3. Write samples more often.
This probably isn't as feasible. If anything, you should probably have a short "Wait" function in the consumer loop where the DAQmx write is occurring, just to regulate loop timing and give the CPU some breathing space.
4. Reduce the sample rate.
Definitely not a feasible option for your application, so we'll just skip that one.
5. Use DMA instead of interrupts.
I'm 99.99999999% sure you're already using DMA, so we'll skip this one also.
6. Reduce the number of concurrent apps on the PC.
This is to make sure that the CPU time required to maintain good loop rates isn't being taken by, say, an antivirus scanner or something. Generally, if you don't have anything major running other than LabVIEW, you should be fine.
I think our best bet is to increase the "Samples to Write" quantity (to increase the minimum loop period), and possibly to delay the DAQmx Start Task and consumer loop until the producer loop has had a chance to build the queue up a little. That should reduce the chance that the DAQmx task will empty the system buffer and ensure that we can prime the queue with a large quantity of samples. The consumer loop will wait for elements to become available in the queue, so I have a feeling that the file read may be what is slowing the program down. Once the queue empties, we'll see the DAQmx error surface again. The only real solution is to load the file to memory farther ahead of time.
Hope that helps!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

How do I delete a large text message I sent that glitches the message app?

I just recently sent a REALLY large text message to my friend, but I don't think she actually got it. Since I sent this really big text I can't open the app for messages. Well, I can but it is frozen in the convo I sent the text in and after about 3 seconds the app closes back to the home screen. In the few seconds that I can keep the app open I tried to press the back button (on the upper left hand corner), to delete the convo so that is gets rid of the message. But, like I said before, it is frozen so it won't go anywhere. Also, while the app is open for a few seconds I tried holding the large text to delete it, but again the app is frozen so will do absolutely nothing. I really don't know how to to delete the convo or message to get the app working again. Please tell me if there is any other way to get the app working again. I have thought of resetting me phone, but that would be my last resort. I have a ton of valuable information I have to keep. Thank you!

Reset the Device using this method: Hold the home button + the lock button for about 10-12 seconds until the Apple logo appears. You will not lose any data or current settings.

Possible to have large text in 4k with Mac pro?

Hello, I have a need to view details with my photo editing tasks, so I'm considering a 4k monitor at the moment. However, I've been told that if I actually run the resolution at 4k, the rest of the OS will be extremely small text.
Is there a way to have large text in the OS, but able to view all the details of my photo in 4k with a 2014 Mac Pro?

from the article linked by kaz-k:
--New 4K display settings in OS X 10.9.3. | Source: KhaosT via Twitter

How do you write (large) texts in an iPhoto book?

I am making an Iphoto book and want some of the pages to be dedicated to large texts. The only problem is that when I press the text box and start writing, I can't actually see what I am writing. Then if I click away I can see the text I have written. If I click the box again, and start writing again (without being able to see anything written), I write from the beginning, not from where I finished the previous writing. Plus, I can't delete the text if I make a mistake.

If the test library worked at it should with the book text then you need to repair your original library. Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.

Editing and changing large text file

hi,
new to this, so bare with me.
got a large text file 44meg and i need to change some values in it.
example:
TSX ;20030102;40302216;40300579;1980;1900;3762000
i need to change the lines so that they read:
TSX ;20030102;302216;300579;1980;1900;3762000
thus removing the leading 40 in the middle cols.
Thanks in advance
john

crap, small mistake
1) use BufferedReader to read in the file line by line (BufferedReader.readLine())
2a) for each line, split it on the semicolons (String.split())
2b) change the middle value using String.substring()
2c) construct a new line by appending all strings in the array returned by 2a) to eachother
2d) write this new line to a file using PrintStream (PrintSteam.println())
3) when done, close both the reader and the printstream.

I want Firefox to not be so wide so I need to scroll back and forth with much needed larger text

I want to have large text, but narrower windows. Every time I need to make text larger for certain sites; it makes my viewing window wider so I have to scroll back and forth to read. I once had an add on to keep the window the same size in width, just with longer windows, which I don't mind. I can't remember what it was called. Therefore I can't find it to download.
Please help.

Thanks for the help, Gryllida, I've tried the zooming in/out feature, but it seems to only work on the headers or headlines on some sites; and still the reading text stayed small. I think I'll try the extension instead.
Boy, I do remember using Opera too.
My new computer came yesterday, I'm going to install Ubunbtu instead of windows. It's a barebones kit.
☺♥

SQL Developer paste problem for large text in Linux

Hello,
I have a problem. I cannot paste large text (> 5000 lines) into the editor of a clob column. Pasting in general works. I mean I can paste the whole content e.g. to gedit or I can paste partially the text into the sql developer editor but not as a whole.
Colleagues on a Mac can paste the text into the editor. So it should not be about DB settings.
Can anyone tell me which setting I have to change?
SPECS:
Ubuntu 13.10
java version "1.7.0_25"
OpenJDK Runtime Environment (IcedTea 2.3.12) (7u25-2.3.12-4ubuntu3)
OpenJDK 64-Bit Server VM (build 23.7-b01, mixed mode)
Info
Oracle SQL Developer 3.2.20.09
Version 3.2.20.09
Build MAIN-09.87
Copyright © 2005, 2012 Oracle. All Rights Reserved. Alle Rechte vorbehalten.
IDE Version: 11.1.1.4.37.59.48
Product ID: oracle.sqldeveloper
Product Version: 11.2.0.09.87
Version
Komponente    Version
==========    =======
Java(TM)-Plattform    1.7.0_25
Oracle-IDE    3.2.20.09.87
Versionierungsunterstützung    3.2.20.09.87

I've the same problem and posted it under: 'SQL Dev 2.1 RC1 - "scan defines" doesn't work in opened *.sql files '
I seems, that it doesn't work now, though it worked in SQLDEV 1.5.5
@Chris

Scrollable TextBox with large text

Hi
I am using a TextBox in my windows phone silverlight app. My requirement is to put a really large text in that textbox. in that case I want that to be scrollable. So I have put that in a ScrollViewer. But my text is clipped after a particular level.
Please help me.
Thanks in advance.

Hi rkarti,
In my mind, it may be caused by the TextBox.MaxLength Property.
If the user pastes text or enters text using the keyboard into the textbox that causes the number of characters to exceed
MaxLength, then the last characters in the textbox are deleted.
For more information, please try to refer to this article:
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.textbox.maxlength(v=vs.95).aspx .
So if you have used this TextBox.MaxLength Property, please try to set it to a larger value.
If the above information can not solve your problem, please try to post your code in here.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Forms: How to add large text without getting wrapped

hi Waveset/Sun IDM folks,
I need to add a large text to the form via a Field at the bottom of the Form. So using Title and SubTitle form properties is not an option.
When I use Label/Text/TextArea type of Fiels, I see that the text is getting wrapped as if it is a label for a text box or text area or Radio.
I do not have an option of using Title and SubTitle properties of the Form as the text appears at the middle and bottom of the page. What options do I have?
My form has :
SectionHead:
FirstName: <Text>
LastName: <Tex>
Address: <Text Area>
Contract(Section Head)
<Large text needs to go here>

ok, nevermind, Using FieldType-Panel and adding Label fields in it worked out fine for me. Issue closed.

Problems using larger text

I have a few machines using Appleworks and trying to use larger text. When they are typing text with a 48 or 72 pt font the cursor is behind 3 letters. Is there any way to fix this?

AppleWorks, being an OS 9 application carbonized to run in OS X, doesn't take advantage of a lot of OS X features, one being the display of text. This is not something that got fixed with the 6.2.9 update. Usually turning Fractional Character Widths on in Preferences > General… > Topic: Text will fix the problem. It is not at all unusual for the problem to appear on one Mac & not another, even though they are running the exact same system & AppleWorks version. It even can vary document to document on the same Mac.

JSP and large text issue

hello,
i have some large text type defined on a JSP (using <TEXTAREA>). they are defined as CLOBs in the DB. now when i save it, it saves ok in the DB. but when i view it in the JSP, the saved data contains "<BR>". i do not get it from where this come from. any idea to find and resolve it?
thanks

Who in the world actually looks at a 100,000 row report?
Anyway if I were you and I had to do it because some clueless management person decided it was a good idea... I would write a program in something that once a day, week, year or whatever your time period produced the report (in maybe a PDF fashion but you could do it in HTML if you really must have it that way) and have it as a static file that you link to from your app.
Then the user will have to just wait while it downloads but the webserver or web applications server will not be bogged down trying to produce that monstrosity.

When using large text my lines overpal, how can I increase the line spacing?

When using large text my lines overpal, how can I increase the line spacing?

Press 'Ctrl + Enter' after the numbered item to insert blank space below it. If you press 'Enter', the next line will start with the next number. As long as you want to type lines without a numbering, press 'Ctrl + Enter' and type the line.

Certain web pages are stuck in large text in Safari

I've been having this issue since I got my Air last year. Certain web pages (MSNBC and Google to name a few) are stuck in really large text. Other web pages are fine. I've tried resetting th browser, deleting cookies, etc. But I cannot seem to fix this issue. Anyone have any ideas?
Thanks

Sorry. I poked around furhter and finally found the issue. The font sizes were too big! Not sure when I could have done that, but there you go. This question can be closed down.

Searching with large text

Greetings,
We are evaluating Oracle 10g specifically for its Oracle Text functionality and are having a difficult time trying to figure out how to use large text for searching.
Specifically, we have a table containing large, full-text descriptions that we wish to find using smaller abstracts. Our full-text may be anywhere from ten thousand to a hundred thousand characters in length. Our abstracts tend to be much smaller; in the five hundred character range.
We wish to use these smaller, five hundred character abstracts to locate documents that may be related based solely upon common keywords. We will eventually get into concept matching, but for now we simply wish to find document matches based upon keywords. This query is quite similar to ORing every term in the abstract and performing a CONTAINS query, but should hopefully be less clunky.
SQL Server allows us to do this quite simply by performing a freetext search. We plug our abstract into the search algorithm and receive a listing of documents that it deemed to be similar.
Does Oracle Text provide a similar functionality and, if so, can someone point me in the right direction?
Many thanks,
Kirk

We are currently using a tool mandated by our client to cluster documents and perform concept (theme) based searching. This tool does not, however, perform keyword searching. We are looking to supplement its results with keyword search results from, say, Oracle Text or SQL Server (or Google or any of 100 other keyword search capable tools on the market).
We already have a working prototype that uses SQL Server. Using fulltext keyword matching, it accepts an abstract and returns to us all of the documents that mostly closely match. We would like to also perform this test in Oracle Text, however, we are unable to figure out how to make Oracle accept a large text for searching without significant reformatting.
For example, say my text is "Four score and seven years ago". In SQL Server, I am able to pass this in, as is, and it will return to me the Gettysburg Address as its highest ranking match.
With Oracle Text, I was able to produce similar results, but I had to reformat the query string to "$Four$|score$|and$|seven$|years$|ago". I am looking for a way to pass in "Four score and seven years ago" without having to perform any gyrations on the text.
Thanks,
Kirk

Cell with large text keep getting bigger?

I'm an experienced Excel user. Please see my attatchement. I want it the way excel handles large text.
Number just keeps adjusting the cell height.
I want my text in one simple straight line as in Excel.
How can I accomplish this?
Image upload not working. Here is the link:
PHOTO: http://puu.sh/exSn9/154ae4def0.png

Hi giorgioj,
With a table selected, go to Format Panel > Text
Alignment > Wrap text in cell (and turn it off).
Regards,
Ian.

Large text

Similar Messages

Maybe you are looking for