Laserjet 5000n installed on windows 7 shows offline

I installed the driver for the 5000n laserjet and it worked fine.  Overnight my computer shut down and I had to restart it today.  Now my laserjet is not recognized by my computer and it says it is off line.  Frustrating!  How do I get it to print again??

Hello design tec did you fix your problem? I wonder if I can get drivers from you since I don't have them and I just got a used 5000N hp
Please let me know

Similar Messages

  • Laserjet 1020 install on windows 7 machine

    I am trying to install a laserjet 1020 on a windows home machine. i get a message saying waiting for PnP to finish installing driver.  This is where it hangs.  thanks

    PnP tells the printer device drivers where and how to install the 1020.
    Did you plug in the 1020 b4 running the Win7 install software?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Will not stay installed. Always shows install window and disk on desktop.

    Downloaded and installed Firefox last fall on new Mac Air, OS 10.9.5. Installed as directed, same way I have always done. When I dragged the icon to the dock, it seemed fine, but next time I used the Mac, it appeared as a '?', not the actual icon. Every time I click on the 'icon' in the dock, I get a bar " Verifying ". When it finished, I get the Mac window warning me it was downloaded from the net, do I want to open it ? I MUST click on 'open ' to get Firefox to run.
    Then it shows me the 'Install firefox ' window. So I have to go through install again, drag into application folder. I get another window telling me I am trying install an old version. Do I want to replace the one I have, keep both or cancel. I cancel. I can eject the disk and use Firefox after this. But every time I quit Firefox, close the Mac or Restart, I get to do this all over again. Every single time. VERY frustrating. Have installed all updates as they come along, so far has made no change to this nonsense. Used it on my old Mac for a decade with no problems, now this ?
    I just saw there is yet another update past my version of 31.0, I will install that, but no other updates have fixed this issue so far.

    Just an update to the original question. I tried to update to the next version of Firefox, but I can't. Says it can't connect to the server and times out. Tried a number of times, same result.

  • Hp laserjet p1006 is not being installed on window server2008 64 bit

    hp laserjet p1006 is not being installed on window server2008 64 bit

    Hi,
    The printer is not supported on Windows Server 2008, only the operating systems listed below are compatible:
    http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435682/model/3435683/drivers
    The latest supported server OS is Windows 2003. any newer Server OS is incompatible with the printer.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Using bootcamp was installing windows xp, at the select ntfs or fat format selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error.

    using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro  10.6.8)

    Have a read here http://support.apple.com/kb/TS1722 for solution.
    Stefan

  • Hello, I have creative cloud installed on my Mac Book Pro - OS X 10.9. 5 When trying to download trial version, a popup window shows the message " you have been disconnected"  Connect to continue. No way to access to the download programs after entering t

    Hello, I have creative cloud installed on my Mac Book Pro - OS X 10.9. 5 When trying to download trial programs, a popup window shows the message " you have been disconnected"  Connect to continue. The same message comes after repeated attempt to entering the login and password info. How can I solve this?

    Hi Jeff,
    Here is the screenshot of the window which comes after any attempt to download a trial version.  It is in French, it means you have been disconnected, connect to continue.

  • Offline install of Windows 7 SP1 not recognised by Windows Update

    Hi
    I have asked this question over at the Windows Community forum, and someone suggested that I ask here.
    This question regards Windows 7 and Service pack 1
    I bought a couple of new computers, and decided to use the offline SP1 installation on each to get the computers up to date when I first configured them.
    So I downloaded the offline update iso from Microsoft, created a DVD and installed SP1.
    After configuring my computer, I then connected windows update to get all fixes etc since SP1.
    To my dismay windows update has presented me with a list of *all* updates, including SP1.
    Is there any way of getting Windows update to recognise the fact that I already have SP1 installed?
    Further info:
    This is the procedure I went through.
    1) Built the computers
    2) Installed Windows 7
    3) Installed hardware device drivers
    4) Installed SP1 from DVD
    5) Connected to the internet
    6) Activated Windows
    7) Used Windows Update
    8) Installed the fix/patch required for windows update to work
    9) re-connected to windows update
    10) Was dismayed at the list of fixes requiring download. (around 148)
    After going through the process of downloading the updates, at around the time of the second re-boot, the list of updates included Service Pack 1.
    AV Software was going to be the next thing to install, after the computer was *fully* patched
    Further Further informatio :)
    I have since gone ahead and installed Windows on my second computer.
    I'm still interested in finding a solution for future reference.
    After installing Windows7 and applying the offline SP1 update, I checked to see what updates were installed before
    activation and connecting to windows update.
    These are the updates listed.
    1) Service Pack 1 for Windows 7 (KB976902)
    2) Update for MS Windows (KB976902)
    3) User Mode Driver framework V1.11 (KB2685813)
    4) KB958488 (the list just haqd the kb number, no title)
    5) Hot Fix for Windows (KB2505454)
    My original question, and the answers/feedback can be viewed at the following page:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/offline-install-of-windows-7-sp1-not-recognised-by/e8ab61d0-8669-4297-acfd-4acc0da8c1dc?rtAction=1427893878897
    Cheers...
    Daz

    Hi Daz,
    You mentioned that the SP1 prompted again in the needed updates, I suspect that that is not the full service pack, it is only some changes to existing non-security content, appropriate 10 MB size. you can check the size of the update to confirm
    this.
    See more information in this link
    http://support.microsoft.com/en-us/kb/894199
    And after you have manually installed the updates offline, have you checked whether these updates are listed in the "installed updates", or in Update history? And you can check the new detected updates, whether they have been successfully installed
    in your system. Meanwhile, when you check for updates online, please check your Windows Update settings, we recommend you to check for important updates, not optional updates or hotfix. You can install the optional update or hotfix when you need it in the
    future.
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

    My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

    Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
    When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
    So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

  • Installed Apps not showing in list - Windows 8, No...

    I have a new Nokia 620 running Windows 8. I have installed a number of apps and only around half of them show in the app list. I know that they have properly installed because the show up in the memory as installed apps and when I have tried to reinstall them through WIndows Store, I am unable because only the 'Share' button is available.
    Most of the apps which are not showing are childrens games/learning apps.
    There is no 'preferances' option in settings - store. This is the only solution I have been able to find but it is not available on my phone.
    How do I make these apps visible - and if this is not possible then how do I uninstall them given that they are not visible but taking up space?!
    Thanks in advance.

    I've had the same issue, on and off, since Adobe CC launched.
    Sometimes the apps are installed, sometimes the CC launcher suggests I install things that are already installed.
    Today it signed me out for no apparent reason and now offers me a Photoshop CC update but suggests I install the Lightroom that has been there all along.
    It just seems like bug-ridden software to me.
    This is not for the enterprise version but I imagine these forums are filled with the same broad issue over and over and over again.
    You might get updates, you might not, this is a feature.

  • When i want to install iTunes, it show that Gathering Qiucktime information...Please helppp me i need iTunes to sync my apple devices, i have 64bit windows

    When i want to install iTunes, it show that Gathering Qiucktime information...Please helppp me i need iTunes to sync my apple devices, i have 64bit windows.Thanks

    You are probably running OS 10.4 or 10.5 on a PPC Mac.  No version of  iTunes higher than 10.6.3 is available for these older Macs.  I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher.  The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac.  I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.

  • I downloads the latest iTunes software update and it properly installed.  But,  I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the

    I downloaded the latest iTunes software update and it properly installed.  But,  I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the window.  Tried to quit on both the big window and the software update title in the menu bar.  No luck.

    Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue.  It did not help.  Found a very similar question in the discussions and it recommended "Force Quit".  That worked and the update works normal and the window is gone.  Thanks!

  • Installing the free 30 day trial of Adobe Acrobat XI Pro. Stuck at the 'Download Completed' window, showing it's complete, but another window doesn't come up and the program isn't showing up anywhere either...?

    Installing the free 30 day trial of Adobe Acrobat XI Pro. Stuck at the 'Download Completed' window, showing it's complete, but another window doesn't come up and the program isn't showing up anywhere either...?

    Hi Tammy Havlik,
    Try Downloading the Installer Package from this Link ( Download Acrobat products | Standard, Pro | XI, X) and Let me know if this helps.
    Regards,
    Rahul

  • Legally owned and installed Helvetica not showing up on Windows 7 Adobe CS3 Master Collection

    I have owned and used a licensed version of Helvetica for a number of years now (typing with one arm since the purchase cost me an arm AND a leg, hehe) - I recently "upgraded" to Windows 7 and reinstalled all of my fonts which all show up other than Helvetica. Helvetica DOES show up in other applications such as Office Word, but not any of my Adobe products. These are Type 1 fonts.

    I have a system with Windows 7 32-bit and several with Windows 7 64-bit. None of these systems have any problems installing Type 1 fonts or accessing same for typical Windows applications such as Word. Type 1 fonts are installed under Windows 7 (either 32-bit or 64-bit) by right clicking on the .PFM file for the font (where the assumption is that the .PFB file is in the same directory). Don't attempt to use dragon-drop to install like you may have with either Windows XP or Vista.
    One further question might be whether you did a clean install of Windows 7 or you attempted some upgrade? Always do a clean install. Furthermore, do not even attempt to install the now-obsolete Adobe Type Manager product which is fully incompatible with Windows 7.
              - Dov

  • Adobe Flash  Player 11.7.700.169 2 , install window shows 1 item Zero KB?

    Adobe Flash  Player 11.7.700.169 2 , install window shows 1 item Zero KB? Even tried an uninstall and same thing, shows 1 item Zero KB? WHY?

    Hello Chris and Sameer,
    thank you for getting back on this issue.
    To answer your questions first:
    - no, I have not posted this issue in the connect forums - I will do and point to this discussion
    - Sameer, I have tested the webcam on the website you pointed out, it is not working with Firefox but it is working in Chrome
    I also need to give you an update on the current versions I use:
    Win 7 Pro (64bit) (all updates included)
    Firefox 21.0
    IE 10.0.9200.16576
    Chrome  26.0.1410.64 m
    Flash Player 11.7.700.202
    Adobe Connect Addin 11.2 r261
    I tested the webcam via FP with Firefox, IE and Chrome in the versions mentioned above. Only in Chrome I can run the WebCam on the www.testwebcam.com website. Once I start the adobe connect meeting and want to start the webcam the Connect Addin stops working with the popup as shown in post 3 of this discussion in all three browsers.
    All components have been uninstalled and installed again (except for IE)  for testing with no change in the result. I have also rolled back the computer to the system recovery point furthest back in time to see if any other installation might be the cause. But no luck either.
    I am happy to post the logs but would need advise where to find these or how to retrieve.
    Thanks!
    Konwill

  • "printer installer" window shows up at every boot after installing printer

    After installing successfully a Samsung printer, everytime I boot Mountain Lion there is a  "printer installer" window shows up.
    Any way to get rid of this?
    Regards,
    Vincent

    I've come across someone who had this before - they'd forgotten to take the installer disc out of the optical drive so it ran its installer at every boot. Any chance that's it?

Maybe you are looking for

  • Printing problem in ALV report.

    Hi, I have made an ALV report using 'REUSE_ALV_LIST_DISPLAY' FM. There are 18 coloumns in this report which i want to print in A4 paper. Thses all coloumns are printing but the font size is too small and also printing start from left most i.e. no mar

  • Intel 9965 Device cannot start (Code 10) fix

    I just wanted to report my experience upgrading from Vista Basic to XP Pro on my new T61. The laptop came with Vista, I upgraded to XP Professional Service Pack 3.  Everything worked with the Lenovo downloadable drivers except the sound card, which w

  • Best practiceS for setting up Macs on Network

    Greetings. We have six Macs on our Windows Server network; three iMacs and three laptops. We have set up all the machines and they are joined to the Active Directory. In the past, we have always created local users on the machines and then "browsed"

  • RSA SecurID and Cisco ACS integration for user(s) with enable mode

    I thought I had this problem figured out but I guess not. I have a Cisco 2621 router with IOS 12.2(15)T17. Behind the router is a Gentoo linux, RSA SecurID 6.1 and Cisco ACS 3.2. I use tacacs+ authentication for logging into the Cisco router such as

  • Some text on page re-sizes

    I have a page on my website that basically has two columns of text. The text is the same in both columns, but for some reason the text on the right column seems to re-size itself after the page loads. What is most weird however, is that while the pag