Last few applications do not install, fail with "Execution status received: 24 (Application download failed )"

Hello,
We deploy applications using a task sequence. It does not matter which order we put the applications, the last two or three applications will not install. All of the applications install correctly when moved up in the task sequence order but
previously working installs will fail once they are moved to the end of the list. Inside of the SMSTS logs we receive several errors listed below. I'm assuming it has to do with a space issue or limit but cannot find anything that would cause this error.
On our distribution point the free disk space on the 1st package share priority is 100GB and 65GB on the 2nd package share priority which is at least triple the total size of all of the applicaitons being deployed. There are no errors under site status, component
status, or under distribution point configuration status. The workstations have 300GB HDs.
Execution status received: 24 (Application download failed).
Installation failed.
Install application action failed: 'AppName'. Error Code 0x80004005
Any help is appreciated, thanks

The CAS log shows the problem, I do have errors there. The SMS Cache was filling up so I doubled the SMSCACHESIZE attribute (SMSCACHESIZE=10240) to bypass the issue and allow all applications to install. The issue remains that
the content is not deleted, it looks like the Error: DeleteDirectory error is not clearing installed applications.
User policy requested with no user credentials. ContentAccess 5/23/2013 11:43:26 AM 3516 (0x0DBC)
Invalid user. ContentAccess 5/23/2013 11:43:26 AM 3516 (0x0DBC)
Submitted CTM job {B72D66BB-EEA7-45B8-8E9B-2B2FFDC2D601} to download Content Content_2d35848f-3fbe-4ac5-8e64-d2e7b0079ffc.1 under context System ContentAccess 5/23/2013 11:43:26 AM 3516 (0x0DBC)
Successfully created download request {C5F0CA27-463F-424C-86BA-3C6E3F12AEAD} for content Content_2d35848f-3fbe-4ac5-8e64-d2e7b0079ffc.1 ContentAccess 5/23/2013 11:43:26 AM 3516 (0x0DBC)
Location update from CTM for content Content_2d35848f-3fbe-4ac5-8e64-d2e7b0079ffc.1 and request {C5F0CA27-463F-424C-86BA-3C6E3F12AEAD} ContentAccess 5/23/2013 11:43:26 AM 3284 (0x0CD4)
Download location found 0 - xxxx ContentAccess 5/23/2013 11:43:26 AM 3284 (0x0CD4)
Download request only, ignoring location update ContentAccess 5/23/2013 11:43:26 AM 3284 (0x0CD4)
Download started for content Content_2d35848f-3fbe-4ac5-8e64-d2e7b0079ffc.1 ContentAccess 5/23/2013 11:43:26 AM 3140 (0x0C44)
Download completed for content Content_2d35848f-3fbe-4ac5-8e64-d2e7b0079ffc.1 under context System ContentAccess 5/23/2013 11:43:38 AM 4008 (0x0FA8)
Computed hash: 14C8B11451D0B7A4EE848492687679E7FB24E13A14C2B75C7D73F4A5EA49FCBD ContentAccess 5/23/2013 11:43:44 AM 4008 (0x0FA8)
Hash verification succeeded for content Content_2d35848f-3fbe-4ac5-8e64-d2e7b0079ffc.1 downloaded under context System ContentAccess 5/23/2013 11:43:44 AM 4008 (0x0FA8)
Saved Content ID Mapping Content_2d35848f-3fbe-4ac5-8e64-d2e7b0079ffc.1, C:\Windows\ccmcache\3 ContentAccess 5/23/2013 11:43:44 AM 4008 (0x0FA8)
Download succeeded for download request {C5F0CA27-463F-424C-86BA-3C6E3F12AEAD} ContentAccess 5/23/2013 11:43:44 AM 4008 (0x0FA8)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\3.BCWork with Error 0x00000002. ContentAccess 5/23/2013 11:43:44 AM 4008 (0x0FA8)

Similar Messages

Hi, I upgraded to Creative Cloud 2014 and now After Effects and Premiere says that Quicktime is not installed. With Adobe Premiere, the application crashes soon thereafter.

Please help. This is uber-frustrating.

Being a Mac, is Quicktime installed by default, or do you have to manually install it as in the Windows world?
These may not help, but since I'm on Windows I only have a few saved Mac links
next link says After Effects, but check YOUR permissions !!!
http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
And some older links
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

CM12 OSD using UDI - Applications Does Not Install

Hello all, hoping someone can shed some light on my issue. This is the first time I'm trying to use UDI for OSD so bare with me. I've done some research and I'm able deploy an OS using UDI but my applications are not installing. I only have one application
I'm trying to install (java 7 update 45 for testing) and when the whole imaging process is done I get a yellow exclamation mark by this application (if I hover over it, I get a bubble text box stating "Install State Unknown") and when I
log into Windows the application is not installed. I've deployed this application thru a task sequence successfully so I know it can deploy via TS. Anyone have any ideas of where I should look at so I can figure out my problem? Thanks in
advance.

I finally got it to work. Here's what I did.
1. created application called TEST and ticked the box that says "allow this application to be installed from the install application task sequence action without being deployed"
2. on my osd collection I created a variable named APPLICATIONS001 with a value of TEST (TEST was the name of the application in step 1)
3. advertised this as an AVAILABLE application to my osd collection
4. On the SCCM server I opened up my UDI xml file in the UDI Wizard Designer, under Install Programs I added my application called TEST, and saved the xml file.
5. Updated my MDT Toolkit Package
6. Ran the image and it installed the application successfully.
Now the only 2 things I did differently were 1. I recreated the application and 2. I named it TEST. The previous one was called Java 7 Update 45 so I'm not sure if there's a limit on the name or it didn't like spaces or maybe the package just needed to be
recreated for some odd reason (seen this recreation solution on other forums too). But anyways the only thing left for me to figure out is why it keeps installing my OS on the drive letter E and I want the OS installed on C. I'm using the default TS that
was created by the Create MDT Task Sequence wizard.

The request failed with HTTP status 401: Unauthorized error message

Hi
While processing security (OLS v4.3 SQL2000), we encounter the following problem towards the end of the process:
Creating Desktop folders
Completed
Error occurred
CreateJournalReport: The request failed with HTTP status 401: Unauthorized., FindAppsetFolder Failed
We have checked the IIS as recommended in some previous threads but we still have the same error message each time we process security.
Does anyone have any other ideas what the problem could be?
Many thanks

Hi,
There are several SAP notes speaking about this subject. For example, check if SAP note numbers 1103004 or 1104690 can help you.
Kind Regards,
Patrick

Hi im from oman, muscat my friend and i bought ip5 last month her phone has facetime and mine is missing. I went back to Extra store and availed apple product packages but after availing t, facetime application was not installed.How to install facetime?

My serial number is C3******TWD, hi im from oman, muscat my friend and i bought ip5 last month her phone has facetime and mine is missing. I went back to Extra store and availed apple product packages but after availing t, facetime application was not installed.How to install facetime?
<Edited by Host>

Guys thank you so much for the advises and helps.. i went back to Extra store and finally they changed my unit to a new one..Now i can figured out which one has facetime or none, from the box itself at back it writtens arabic so definetely no facetime and if english, portugese and chinese characters has 100 % with facetime.. I'm so blessed that they agreed to changed my unit to new one. At first the manager opened four boxes of new unit for me to check if facetime is there and he reassured me there's new batch of iphone5 coming on 2nd day. So i went back and he changed it to new one.. .Now im satisfied..

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

The request failed with HTTP status 404: Not Found

Hi
BPC version we are using is : 5.0.502
When we Publish all reports using the steps below:
a. Log into BPC Web
b. Click on Available Interfaces> Select BPC for Administration
c. Under Web Admin Task Click Publish Reports
d. Select all of the reports and click the green check mark to publish the
reports.
I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
Event Type:     Error
Event Source:     OutlookSoft log
Event Category:     None
Event ID:     0
Date:          12/8/2008
Time:          11:26:42 AM
User:          N/A
Computer:     BPCAPP
Description:
==============[System Error Tracing]==============
[System Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditMgrService/SetAuditReportFiles
[DateTime]     : 12/8/2008 11:26:42 AM
[UserId]       : MMPlanning
[Exception]
    DetailMsg : {The request failed with HTTP status 404: Not Found.}
==============[System Error Tracing End ]==============
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
If anyone knows the resolution for the above issue, please help me.
Thanks in advance
Sajeev Abraham

Hi
Thanks for the response.
Below are the full contents of the error message pop-up.
( System.Expection: the reguest failed with HTTP status 404:Not found at
Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
[]args,sTRING[]paramnames, Boolen[]CopyBack)
at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
strApp,string strFiter)
url is given below
http://<HostName>/osoft/Admin/WebAdminMain.aspx
BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
Sql Reporting server is working.. I could connect using sql management studio.
Thanks

The application was not installed because it is not signed

Hi
I am having a weird problem with some apps following a restore.
When I synch with iTunes, some apps are installed, and others get an error "the application was not installed because it is not signed".
These are ordinary apps, such as facebook.
The really strange thing is I can download the apps direct to the iphone, but instead of them appearing as a brand new app, all my previously recorded settings are restored.
The Capacity bar in iTunes is showing a large amount of 'other' data being stored on the phone. Its as if the apps are being transfered to the iphone from my PC, but just not being enabled.
I am running iTunes 9.2.1.5 and iOS 4.02 on a vista 64 PC.
Can anyone help?
Regards
Grant

If you are seeing alot of "Other" in the capacity there is a issue with the software you loaded onto the phone. When you did the restore did you restore from backup?
If so restore again and setup the device as new. Then sync all content back and should resolve the issue.
Hope this helps!!

I lost my iPod Touch 4th Gen. Find my iPhone application was not installed. Is there any way if I can find it or else I can lock the device so nobody uses it?

I lost my iPod Touch 4th Gen. Find my iPhone application was not installed. Is there any way if I can find it or else I can lock the device so nobody uses it?

lost/stolen
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

The application was not installed on the iphone because it requires a newer version of iphone software

Hi , I Have An Iphone 2G , Its Old I Know But I Need It , So When I Sync Any Application Like Talking Tom/Chrome/Facebook/Angry Birds I Got A Msg the application was not installed on the iphone because it requires a newer version of iphone software , My Firmware Is 3.1.3 (7E18) Which Is Last For 2G , And Last Update For Itunes , But There Is a Application Called Recored Video Worked And Synced Successfully !
Please Help...

If the developer of the app has updated it so that it requires a later version of iOS, there is nothing to be done. Review the requirements for the app in the App Store.
Helpful hint: Title case (capitalizing every word in a sentence) is harder to read than standard capitalization (just the first word of a properly punctuated sentence). Some people won't read posts at all if there doesn't seem to be at least an attempt at standard grammar, spelling, punctuation and usage.
Best of luck.

The application was not installed unknown error: 0xE8000050

The application was not installed unknown error: 0xE8000050.
How to fix please???

If it helps, the redirect page when I clicked on more information was:
http://support.apple.com/kb/TS1702
I tried all the following, rebooted my ipod still didnt work.
I would like to know how to completely remove all traces of the application, so I can reinstall it again. Thanks.

HT4623 All new iSO6 applications did not install. How do I retrieve them.

All new iSO6 applications did not install. How do I retrieve them. (Exp.SIRI)

Siri is not available on iPad 2

IDOC is Getting Fail with - 56 Status EDI Partner profile not available

Hi,
I am trying to Post invoice Data into IDOC on ECC Side.
My Scenario is File u2013 XI u2013 ECC(IDOC).
But It is Getting Fail with 56 Status u201C EDI: Partner profile not available u201C
On Control record I am getting this
Port                      BLANKKKKKKKKKK
Partner Number              CLNTDEC110      Logical system for Client
Partn.Type       LS                    Logical system
Function                                  BLANKKKKKKKKKK
Port                            SAPDPI
Partner number             CLNTSAMPLE
Partn.Type                      LS         Logical system
Partner Role                   BLANKKKKKKKKKK
My configurations are Like this :----
On ECC Side MY SID is DEC
On ECC side I have two logical system in CLNTDPI100 for PI
                         CLNTDEC110 for ECC.
I have Partner profile on ECC system on CLNTDPI100 logical system    - we20
Added message type in inbound side of partner Profile (INVOIC-INVOIC02)
ON SAP PI/ XI System MY SID is DPI
IDX 1 has Port name SAPDEC
On Message mapping EDI_DC40 is mapping with constants with below given value
<INVOIC02>
   <IDOC BEGIN="">
      <EDI_DC40 SEGMENT="">
         <TABNAM> </TABNAM>
         <DIRECT>2</DIRECT>
         <IDOCTYP> </IDOCTYP>
         <MESTYP>INVOIC</MESTYP>
         <SNDPOR>SAPDPI</SNDPOR>
         <SNDPRT>LS</SNDPRT>
         <SNDPRN>CLNTDPI100</SNDPRN>
         <RCVPOR>SAPDEC</RCVPOR>
         <RCVPRT>LS</RCVPRT>
         <RCVPRN>CLNTDEC110</RCVPRN>
      </EDI_DC40>
Regards
PS

Check the following :
in We 02 which partner number is displayed just in the posted IDOC -> 2nd coloum in the IDOC list .and verify if the
same you have in Partner profile. Actually this details comes from ECC business system's logical system name which you give in SLD.
in we 19 - take the error iDOC numner and open the IDOC ->click on the first line -> check entries as you mentioned
above sender port should be PI port not empty.you need to check the partner profiles properly
follow these steps
1. create a RFC destination of tyoe H for Pi system- 2. create a Port and assigen the RFC destination to it
3 create logical system for PI BD54 PICLNT001 say , 4 with the same name create a partner profile in We20
    in parter profile maintain the inbbound message parameters and add the PI port as receiver port in it .Give the basic type also .
now
for sender details in ur case PI : u have port (defined in PI IDX1),patner number (LS defined in ECC PICLNT001), parter type LS.
for receiver you have port defined (as above), partner number the logical system for ECC system.
in we 19 ,, edit the control record as above and go to the tab inbound processing and test the internal posting
it should work fine. in the adapte specific attribuet for receiver ECC system , maitain the same LS name , if any wrong entry is
there then change the LS in sld to poing to correct LS/
refer this
http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/technology/sap/26/
Regards,
Srinivas

"workflow.asmx" method The request failed with HTTP status 404: Not Found.

When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
Error details: {"The request failed with HTTP status 404: Not Found."} " at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)\r\n at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state)\r\n at System.Threading.ThreadHelper.ThreadStart()"

Hi,
For a better troubleshooting, I suggest you to do as follows:
1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
2. On client side you can also access Workflow.asmx from IE to see if it returns error.
3. Check the link below:
http://www.mail-archive.com/[email protected]/msg02092.html
If you want to operate the workflow in Client-Side, we can use Client Object Model in SharePoint 2010 to achieve it.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Last few applications do not install, fail with "Execution status received: 24 (Application download failed )"

Similar Messages

Maybe you are looking for