Latest BNX2 driver crashes 10g RAC nodes

I have a situation with 10g RAC on SLES-9 on HP Proliant 580 servers where sqlnet load balancing with jumbo frames works fine until the latest bnx2 Broadcom drivers (1.7) are applied. There are intermittent node crashes after load is generated on the RAC system (11i E-Business Suite). The crashes are 100% repeatable using hammerora and a load balanced sqlnet entry.
HP is claiming the crashes are an Oracle problem, but the crashes go away when the older bnx2-1.6 drivers are reloaded.
Anybody else having issues with the latest Broadcom drivers with RAC?

Hi mdtaylor
It seems that oracle (at least with redhat on a DELL server) is using those drivers http://www.oracle.com/technology/tech/linux/validated-configurations/html/vc_dell6950-oel4-rhel4-md3000_1.html.
What about asking people on the suse forum http://forums.opensuse.org/ or if you have support make a service request at Suse?

Similar Messages

  • OVD Database Adapter w/ JDBC Thin Driver to 10G RAC DB Resource

    I'm looking for feedback as to whether anyone has successfully consumed a RAC database resource through an OVD database adapter? If so, I am interested in what your host value in the adapter ui looked like.
    I am successful with this connection only if I go against one of the RAC nodes directly, thus losing redundancy.
    This is OVD 10G 10.1.4.3 on RHEL4
    RAC DB 10G
    I have tried:
    (DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=ON)(ADDRESS=(PROTOCOL=TCP)(HOST=10.26.4.203)(PORT=1540))(ADDRESS=(PROTOCOL=TCP)(HOST=10.26.4.204)(PORT=1540)))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1540))(ADDRESS = (PROTOCOL = TCP)(HOST = myhost2)(PORT = 1540))(LOAD_BALANCE = yes)(CONNECT_DATA = (SERVICE_NAME = SCHTESTS)(FAILOVER_MODE = (TYPE = SELECT)(METHOD = BASIC)(RETRIES = 200)(DELAY = 5))))
    (DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=myhost)(PORT=1540)) (ADDRESS=(PROTOCOL=TCP)(HOST=myhost2)(PORT=1540))(CONNECT_DATA=(SERVICE_NAME=SCHTESTS)))
    OVD Manager seems to anticipate this format because it then rejects inputs on the host and port form fields which I take as a positive indicator.
    Otherwise, this feels like taking shots in the dark...
    Any assistance or feedback is much appreciated.
    Mark

    Sorted this out:
    Used custom URL and made sure that the OVD Manager IDE was not appending any additional information following the closing bracket of the URL.
    The full successful URL was as follows with no values in any of the other fields:
    jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS = (PROTOCOL = TCP)(HOST = host1)(PORT = 1540))(ADDRESS = (PROTOCOL = TCP)(HOST = host2)(PORT = 1540))(CONNECT_DATA=(SERVICE_NAME=SNAME)))

  • 10g RAC Node down Enterprise Manager

    Hello
    We have a 2 node Oracle 10g RAC Rel2 Linux setup. Enterprise Manager was first stalled on Node1 and we access it using http://node1:5500/em.
    This node has a hardware failure and is out of commision at the moment. When I try to connect to http://node2.5500/em it does not work.
    I see the dbconsole process is running onthe node2.
    How can I use the Enterprise Manager if the node1 is down?
    Thanks

    Can you try deconfig and config again on node 2?
    emctl stop dbconsol
    emca -deconfig dbcontrol
    emca -config dbcontrolSalman

  • 10g RAC - Node Freeze

    Hi all,
    first, sorry for my poor english :-).
    Well, I have this environment:
    Servers : 2 DELL PowerEdge 1850
    OS: Red Hat Linux Enterprise 4 (Update 2)
    Cluster: Oracle Clusterware with "OCFS2"
    DB: Oracle 10g Release 2.
    It was installed without problem during the instalation, but......
    Every day, at night, the node 2 becomes Freeze, and i found nothing in: messages, dmesg, evmd.log, crsd.log, ocssd.log.
    I need some help, I can´t put this RAC in produccion.......
    Thanks a lot.
    Francisco Conejeros
    DBA Oracle - Santiago - Chile

    Does the second node freeze every night at the same time? Is there any message written into the database alert log?
    If you have access to Metalink take a look at Note:362094.1 HANGFG User Guide. HANGFG automates the generation and collection of hanganalyze and systemstate trace files.

  • Oracle 10g rac network status

    hi,
    i want to know what should be the right detail on oracle 10g rac nodes if i type
    $ifconfig -a
    command on each node . i want to know what entry should be on each node in rac scenario in multiple nodes.
    regards

    Dear frd
    i am sending u status .is there any entry prob in my rac2 node beacause i am getting prob when i run command
    on node 2
    $crs_stat -t
    $CRS-0184: Cannot communicate with the CRS daemon.
    etc/hosts (on both nodes)
    192.168.141.51 RAC1
    192.168.141.53 RAC2
    192.168.141.52 vip-RAC1
    192.168.141.54 vip-RAC2
    10.1.1.1 RAC1_priv
    10.1.1.2 RAC2_priv
    and ifconfig -a status on both nodes
    ON RAC1
    # ifconfig -a
    en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT
    ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
    inet 192.168.141.51 netmask 0xffffff00 broadcast 192.168.141.255
    inet 192.168.141.52 netmask 0xffffff00 broadcast 192.168.141.255
    inet 192.168.141.54 netmask 0xffffff00 broadcast 192.168.141.255
    tcp_sendspace 131072 tcp_recvspace 65536
    en1: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT
    ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
    inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255
    tcp_sendspace 131072 tcp_recvspace 65536
    lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT
    >
    inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
    inet6 ::1/0
    tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
    ON RAC2
    $ ifconfig -a
    en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT
    ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
    inet 192.168.141.53 netmask 0xffffff00 broadcast 192.168.141.255
    tcp_sendspace 131072 tcp_recvspace 65536
    en1: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT
    ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
    inet 10.1.1.2 netmask 0xffffff00 broadcast 10.1.1.255
    tcp_sendspace 131072 tcp_recvspace 65536
    lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT
    >
    inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
    inet6 ::1/0
    tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1

  • Memory Leak when TOMCAT connects to Oracle 10g RAC using JDBC Thin driver.

    We had experienced Memory leak when a Oracle 10g (10.2.0.3) RAC node was evicted. TOMCAT app server is connecting to the Oracle 10g RAC database instances using JDBC 10.2.0.3 thin driver.
    Anyone had similar experience?
    Any ideas? Any bugs reported/fixed?
    Thanks,
    Raj

    If you're doing XA, we absolutely do not support
    driver-level load-balancing OR failover. Use neither.
    For non-XA, you can use driver-level failover. For
    non-XA, you could set load-balancing, but it won't
    help because we get connections from the driver,
    and keep them indefinitely, so the driver never gets
    the chance to affect which connections the pool
    uses after that.

  • 10g RAC on SLES 9 with Firewire drive

    Hello,
    Is there documents/guides to setting up 10g RAC with firewire drive on SLES 9. Thank you.

    Mike:
    Yes! I resolved the problem by applying the 9.2.0.3 patch. However, ocfs is not working properly. Sometime I got I/O problem or used one node to create tablespace but the other node can not see it right away. May be is because I use version 1.0 of ocfs.o. I am trying to find newer version of ocfs.o. If you know where to get it please let me know.

  • R12 with 2 node 10g RAC is not updating with autoconfig correctly.

    Hi,
    we are on R12.0.6 with 2 node 10g RAC. Our collegue did the RAC setup, I was not there at that moment
    steps he followed is
    1. Installed 10g CRS,ASM 10.2.0.3 software and bring up the two nodes.
    2. Configured the RAC DB to Oracle Appplication and registered the Listener with CRS.
    Name Type Target State Host
    ora....D1.inst application ONLINE ONLINE erpdb1
    ora....D2.inst application ONLINE ONLINE erpdb2
    ora.ERPPROD.db application ONLINE ONLINE erpdb1
    ora....SM1.asm application ONLINE ONLINE erpdb1
    ora....B1.lsnr application ONLINE ONLINE erpdb1
    ora.erpdb1.gsd application ONLINE ONLINE erpdb1
    ora.erpdb1.ons application ONLINE ONLINE erpdb1
    ora.erpdb1.vip application ONLINE ONLINE erpdb1
    ora....SM2.asm application ONLINE ONLINE erpdb2
    ora....B2.lsnr application ONLINE ONLINE erpdb2
    ora.erpdb2.gsd application ONLINE ONLINE erpdb2
    ora.erpdb2.ons application ONLINE ONLINE erpdb2
    ora.erpdb2.vip application ONLINE ONLINE erpdb2
    oracle@erpdb1 $
    The issue is, in our tnsnames.ora in both the nodes.
    ===
    ERPPROD=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    instead of
    ERPPROD=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    (INSTANCE_NAME=ERPPROD2)
    Node1 tnsnames.ora
    oracle@erpdb1 $ cat tnsnames.ora
    # This file is automatically generated by AutoConfig. It will be read and
    # overwritten. If you were instructed to edit this file, or if you are not
    # able to use the settings created by AutoConfig, refer to Metalink Note
    # 387859.1 for assistance.
    #$Header: NetServiceHandler.java 120.16.12000000.4 2008/04/28 06:39:48 schagant ship $
    ERPPROD=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD1=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD1_FO=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD2=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD2)
    ERPPROD2_FO=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD2)
    ERPPROD_FO=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD2_LOCAL=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    ERPPROD1_LOCAL=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    ERPPROD_BALANCE=
    (DESCRIPTION=
    (ADDRESS_LIST=
    (LOAD_BALANCE=YES)
    (FAILOVER=YES)
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    ERPPROD_REMOTE=
    (DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    LISTENER_ERPPROD1=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    LISTENERS_ERPPROD=
    (DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    extproc_connection_data =
    (DESCRIPTION=
    (ADDRESS_LIST =
    (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCERPPROD1))
    (CONNECT_DATA=
    (SID=PLSExtProc)
    (PRESENTATION = RO)
    IFILE=/u01/app/oracle/product/10/db/network/admin/ERPPROD1_erpdb1/ERPPROD1_erpdb1_ifile.oraoracle@erpdb1 $
    oracle@erpdb1 $
    =======
    Node2 tnsnames.ora
    =======
    oracle@erpdb2 $ cat tnsnames.ora
    # This file is automatically generated by AutoConfig. It will be read and
    # overwritten. If you were instructed to edit this file, or if you are not
    # able to use the settings created by AutoConfig, refer to Metalink Note
    # 387859.1 for assistance.
    #$Header: NetServiceHandler.java 120.16.12000000.4 2008/04/28 06:39:48 schagant ship $
    ERPPROD=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD1=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD1_FO=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD2=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD2)
    ERPPROD2_FO=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD2)
    ERPPROD_FO=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    (INSTANCE_NAME=ERPPROD1)
    ERPPROD2_LOCAL=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    ERPPROD1_LOCAL=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    ERPPROD_BALANCE=
    (DESCRIPTION=
    (ADDRESS_LIST=
    (LOAD_BALANCE=YES)
    (FAILOVER=YES)
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    (CONNECT_DATA=
    (SERVICE_NAME=ERPPROD)
    ERPPROD_REMOTE=
    (DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    LISTENER_ERPPROD2=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    LISTENERS_ERPPROD=
    (DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb2-vip.domain.com)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=erpdb1-vip.domain.com)(PORT=1521))
    extproc_connection_data =
    (DESCRIPTION=
    (ADDRESS_LIST =
    (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCERPPROD2))
    (CONNECT_DATA=
    (SID=PLSExtProc)
    (PRESENTATION = RO)
    IFILE=/u01/app/oracle/product/10/db/network/admin/ERPPROD2_erpdb2/ERPPROD2_erpdb2_ifile.oraoracle@erpdb2 $
    =====
    Pl let us know how we can achive through autoconfig.
    Regards
    Vasu

    Vasu,
    The issue is, in our tnsnames.ora in both the nodes.What is the issue?
    I believe the following documents should be helpful in configuring your tnsnames.ora (and other files) with RAC implemented.
    Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
    Note: 756050.1 - Troubleshooting Autoconfig issues with Oracle Applications RAC Databases
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=756050.1
    Regards,
    Hussein

  • ORACLE 10G 2 Node RAC on servers AB to 3 node 11GR2 RAC on  new servers XYZ

    Hi Gurus ,
    We have a business requirement to upgrade existing oracle 10.2.0.4 2 Node RAC on servers A,B (HP UX 11.31 ) to 3 Node ORACLE 11GR2 on new Servers X,Y and Z(Linux and servers are from different vendor)
    We don't have ASM.We have RAW file system
    Now this has to be done with near zero down time.This is a very busy OLTP System.Golden Gate is not an option as Management is not going for it this time.
    Storage is same for everything.I am thinking of the following ways.Please let me know if you have any better plan or if you want to correct my existing plan
    Initially i thought of this way and i immediately answered myself
    Plan A
    1 ) Storage copy (BC etc..) exising 10g RAC Database files on A,B to new volumes allocated to Servers X,Y and Z ( I don't think it's possible as OS is different.I am not sure whether copying this way is possible or not , even if possible i am not sure whether new OS can identify these files or not)
    2 ) upgrade 2 Node 10.2.0.4 on X,Y to 11GR2 .
    3 ) Add a Database Node on Z
    Plan B is
    1) Build 3 Node brand new 11GR2 on X,Y and Z
    2 ) Plan for how can you replicate the data ( This has to be a logical way)
    a ) RMAN - Very time consuming as this is >50 TB Database
    b) Golden Gate - Not an option.Even if we can use it , i see there are so many logical issues with golden gate
    c) Expdp/impdp - forget about it :)
    d) physical standby (Versions are different.If it is same version and Same OS then would have been best bet)
    What would be the ideal way to do this with minium down time and with out golden gate
    I think something can be done on the lines of PLAN A itself.
    Requesting your help Gurus
    Thanks

    Hi,
    Have you considered possibility to setup a logical standby and do rolling upgrade ?
    Please have a look at the following:
    1) http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-transientlogicalrollingu-1-131927.pdf
    2) http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-upgrades-made-easy-131972.pdf
    If you can practice on test setup, it looks a faster option than the others.
    Regards,
    Ganadeva

  • Issues while Add / Delete RAC Node in Oracle 10g R2

    Hi,
    I have an requirement to add a New Node in the existing 2 Node RAC at Production, where 1 Node is Active & other one is passive due to licence issue & cannot keep both the nodes as active. Due to performance issues (Memory , CPU Cores ..etc) we are adding another new node.
    Right now we are planning to add a 3rd database node making the new node as active and current active one as passive which is a swap & later on after final observation delete and decommission the current passive node.
    This activity is checked at the Dev database with the same infrastructure (OS + Memory ..etc) but want to check what is the best approach (or) challenges we face during the RAC Node Addition / Deletion
    RAC DB Version : 10.2.o.4
    OS Version : RHEL 5.8
    (1) Is the approach is right one , First Adding the node & later on delete
    (2) If the approach is the correct , what would be the behavious of the 3rd node in means of active (or) passive
    (3) We have taken RMAN backup , OS backup , CRS , ORACLE_HOME , ASM_Home backup , OCR & VD.
    (4) Could you please give detail steps for adding / deleting node in 10g R2.
    (5) Are they any known bugs to us with the DB release (or) OS while performing this activity.
    Since this is a production machine we want to more proactive . Please correct or add any thing i am missing out ...
    With Thanks,
    Rakesh

    Hello Rakesh,
    Please follow the following steps.
    Node Addition Steps
    1. Install and configure OS and hardware for new node.
    2. Add Oracle Clusterware to the new node.
    3. Configure ONS for the new node.
    4. Add ASM home to the new node.
    5. Add Databse home to the new node.
    6. Add a listener to the new node.
    7. Add ASM instance to the New Node.
    8. Add a database instance to the new node.
    Details of steps
    1. run cluvfy to verify whether New node is ready for addition or not.
         $ cluvfy stage -pre crsinst -n node2
    2. from node1, execute
              $/u01/app/crs11g/oui/bin/addNode.sh
    3. Specify node2 vip address and follow instructions.
    4. In the last of installtion it may through an wornig and will ask to click on YES. click on YES
    5. from node1,
              /u01/app/crs11g/bin/racgons add_config node2:6200
    6. from Node1,set ORACLE_HOME=ASM_HOME and then execute addNode.sh from $ASM_HOME/oui/bin and Follow instrusctions.
    7. From node1, set ORACLE_HOME=DB_HOME and then
         /u01/app/oracle/product/11.1.0/db_1/oui/bin/addNode.sh
         and Follow instructions.
    8. from node2 start NETCA and configure listener for new node. While configuring Listener select the name of new node.
    9. from node1 start dbca from ASM Home to configure ASM instance for new node.
    10. Again from node1 start dbca from DB Home to add DB instance
    Node deletion Steps
    1. Delete the Database instance on the node to be deleted.
    2. Clean up the ASM instance.
    3. Remove the listener from the node to be deleted.
    4. Remove the node from the database.
    5. Remove the node from ASM.
    6. Remove ONS configuration from the node to be deleted.
    7. Remove the node from the clusterware
    Details of Steps
    1. Remove database Instance of node2
         Dbca -> instance Management -> delete instance -> password for sys -> select node -> finish.
    2. Stop asm for node2 from any nodes.
         $srvctl stop asm –n node2
    3. Remove asm for node2
         $ srvctl remove asm -n node2
    4. Remove Listener from Node2 using NETCA.
    5. From Node2:
              ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" -local
    6. From Node2, start runinstaller from Oracle_DB_Home/oui/bin, and remove "DB_HOME"
         $ ./runinstaller
         On the WELCOME Screen -> Deinstall product -> Select dbhome name (OraDb10g_Home1) -> Remove
    7. From Node1:
              ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1"
    8. From Node2, set Oracle_Home to asm_1 and then fire:
              ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" -local
    9. From Node2, start OUI and deinstall ASM Home.
    10. From Node1, Set ORACLE_HOME= /u01/app/oracle/product/11.1.0/asm_1
    11. From Node1: from /u01/app/oracle/product/11.1.0/asm_1/oui/bin, start OUI
              ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1"
    12. From Node2: as a root user (#) execute rootdelete.sh from /u01/app/crs11g/install
         # /u01/app/crs11g/install/rootdelete.sh
    13.From Node-1 first find out the node numbers
         # /u01/app/crs11g/bin/olsnodes -n
         output : node1 1
              node2 2
    14. From Node-1 as a root user (#):
         # /u01/app/crs11g/install/rootdeletenode.sh node2[Node_Name] 2[node_no]
         output:
              CRS nodeapps are deleted successfully
              clscfg: EXISTING configuration version 4 detected.
              clscfg: version 4 is 11 Release 1.
              Node deletion operation successful.
              'node2' deleted successfully
    15. From Node2 set ORACLE_HOME=CRS_HOME and then execute
         $$ORACLE_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" CRS=TRUE -local
    16. ./runInstaller and remove CRS_HOME
    17. From Node-1:
         $ /u01/app/crs11g/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1" CRS=TRUE
    18. check node is deleted from ./crs_stat -t

  • Oracle RAC Node Crashing

    Hi,
    We recently upgraded to Oracle RAC database to support Siebel Call Center APplication (8.1.1.11.12 [IP2013]).Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    Frequently we are facing problem of crashing with the Nodes in RAC (Kernal Panic). Due to this users using siebel application are unstable and facing multiple issues Once we restore Siebel Gateway and restart of AOM server fixing the issue.
    Below are the SQL's and Crashing Signature we are seeing du to this crash.
    DBCLog DBCLogError 1 00081f1254bb0ad4:1423830 2015-01-18 11:49:20 OCIStmtExecute: SELECT
    T2.CONFLICT_ID,
    T2.LAST_UPD,
    T2.CREATED,
    T2.LAST_UPD_BY,
    T2.CREATED_BY,
    T2.MODIFICATION_NUM,
    T2.ROW_ID,
    T2.EFF_START_TS,
    T2.EFF_END_TS,
    T2.NAME,
    T2.BUSOBJ_NAME,
    T2.VERSION,
    T2.DEPLOY_STATUS_CD,
    T2.MODE_CD
    FROM
    SIEBEL.S_LST_OF_VAL T1,
    SIEBEL.S_WFA_DPLOY_DEF T2
    WHERE
    T2.DEPLOY_STATUS_CD = T1.NAME AND T1.TYPE = 'WFA_DPLY_STAT_CD' AND T1.LANG_ID = :1 AND
    (T2.TYPE_CD IN ( :2 )) AND
    (T2.NAME = :3 AND T2.DEPLOY_STATUS_CD IN ( :4 ) AND (T2.EFF_END_TS > TO_DATE(:5,'MM/DD/YYYY HH24:MI:SS') OR T2.EFF_END_TS IS NULL))
    ORDER BY
    T2.NAME, T1.VAL
    ObjMgrLog Error 1 00081f1254bb0ad4:1423830 2015-01-18 11:49:20 (oracon.cpp (3896)) SBL-DBC-00105: An error has occurred executing a Sql statement.
    Please continue or ask your systems administrator to check your application configuration if the problem persists.
    and Crash Signature Looks like below
    Exception 0xc0000005 at 0x006500f6
    Thread: 0x00002700, Process 0x00000254
    Thread: 9984, Process 596
    - CONTEXT -
    EIP: 0x00000000, EFL: 0x00010246, FS:  0x0000003b, GS:  0x00000000
    CS:  0x0000001b, DS:  0x00000023, SS:  0x00000023, ES:  0x00000023
    EAX: 0x1a511968, EBX: 0x294ca048, ECX: 0x4cc50008, EDX: 0x3a2ad200
    ESI: 0x4cc50008, EDI: 0x00000000, EBP: 0x00000000, ESP: 0x3a2afff4
    - CALL STACK -
    sslcscr +0xf6
    sscfcmn +0x19050 = CSSObjectBase::CopyErrorMsg() +0xf0
    sscfcmn +0x1950d = CSSObjectBase::DoSetErrorMsg() +0x13d
    sscfcmn +0x19bb5 = CSSObjectBase::SetErrorMsg() +0xa5
    SSFACMBC +0x34a6 = CSSFABCVRec::IsBusinessProcessActive() +0x3b6
    SSFACMBC +0x5133 = CSSFABCVRec::VBCCreate() +0x1e3
    sscfom +0x71d1e = CSSBCVRec::SqlCreate() +0xde
    sscfom +0x4aea = CSSModel::ConstructBusComp() +0xaa
    sscfom +0x653f5 = CSSBusObj::GetBusComp() +0x265
    sscfom +0x65a18 = CSSBusObj::GetBusComp() +0x18
    sscfom +0x13ad8 = CSSModel::BeginSetupView() +0x418
    sscfom +0x13dee = CSSModel::BeginSetupView() +0x5e
    sscaswbc +0x8b070 = CSSSWEUdfLoader::BeginSetupView() +0x30
    sscaswbc +0xe3d88 = CSSSWEFrameMgrInternal::BuildView() +0x1618
    sscaswbc +0xe5646 = CSSSWEFrameMgrInternal::BuildView() +0x36
    sscaswbc +0xb8343 = CSSSWEActionMgr::ActionBuildViewAsync() +0x293
    sscaswbc +0xb873b = CSSSWEActionMgr::DoPostedAction() +0xab
    sscaswbc +0xb9287 = CSSSWEActionMgr::CheckPostedActions() +0x3d7
    sscaswbc +0xe6d41 = CSSSWEFrameMgrInternal::InvokeAppletMethod() +0x11b1
    sscaswbc +0xbbcdc = CSSSWECmdProcessor::InvokeMethod() +0x74c
    sscaswbc +0xc1495 = CSSSWECmdProcessor::_ProcessCommand() +0x725
    sscaswbc +0xc27f8 = CSSSWECmdProcessor::ProcessCommand() +0xab8
    sscaswbc +0xc2d04 = CSSSWECmdProcessor::ProcessCommand() +0xc4
    sscaswbc +0x265559 = CSSServiceSWEIface::Request() +0x309
    sscaswbc +0x267391 = CSSServiceSWEIface::DoInvokeMethod() +0xed1
    sscfom +0x1976c = CSSService::InvokeMethod() +0x24c
    sstcsiom +0x6d6a = CSSSIOMSession::ModInvokeSrvcMethod() +0x10a
    sstcsiom +0x7613 = CSSSIOMSession::RPCMiscModel() +0x513
    sstcsiom +0xe9dd = CSSSIOMSession::HandleRPC() +0x3ad
    sssasos +0x6616 = CompCleanup() +0x3be6
    sssasos +0x5a95 = CompCleanup() +0x3065
    sssasos +0x1a35 = CSSSISObject::operator=() +0x9f5
    sssasos +0x2135 = CompHandleMsg() +0x485
    siebmtshmw +0x494e
    siebmtshmw +0x20051 = GetSmiTaskAPI() +0x6d21
    siebmtshmw +0x239d1 = SmiInProcMsgHandler() +0x2051
    siebmtshmw +0x15f15 = SmiBeginTrace() +0x3195
    siebmtshmw +0x174cf = GetSmiWorkQObj() +0x148f
    siebmtshmw +0xc7f7 = SmiCleanupDetTask() +0x3be7
    sslcosd +0x2152 = OSDThreadPrivIsInit() +0x1d2
    sslcosd +0x21dc = OSDThreadPrivIsInit() +0x25c
    MSVCR71 +0x9565 = endthreadex() +0xa0
    kernel32 +0x2484f = GetModuleHandleA() +0xdf
    - STACK DUMP -
    - MODULE LIST -
    00400000-00445000: C:\siebel\siebsrvr\BIN\siebmtshmw.exe, 811.11.822.4
    7c800000-7c8c3000: C:\WINDOWS\system32\ntdll.dll, 5.2.3790.4937
    77e40000-77f44000: C:\WINDOWS\system32\kernel32.dll, 5.2.3790.5295
    10000000-10025000: C:\siebel\siebsrvr\BIN\ssscsci.dll, 811.11.822.4
    00320000-003cc000: C:\siebel\siebsrvr\BIN\ssscscf.dll, 811.11.822.4
    003d0000-003d7000: C:\siebel\siebsrvr\BIN\sslcosa.dll, 811.11.822.4
    7c340000-7c396000: C:\siebel\siebsrvr\BIN\MSVCR71.dll, 7.10.3052.4
    00450000-0054d000: C:\siebel\siebsrvr\BIN\sslcshar.dll, 811.11.822.4
    77380000-77411000: C:\WINDOWS\system32\USER32.dll, 5.2.3790.4033
    77c00000-77c49000: C:\WINDOWS\system32\GDI32.dll, 5.2.3790.5398
    7d1e0000-7d27c000: C:\WINDOWS\system32\ADVAPI32.dll, 5.2.3790.4455
    77c50000-77cf1000: C:\WINDOWS\system32\RPCRT4.dll, 5.2.3790.5254
    76f50000-76f63000: C:\WINDOWS\system32\Secur32.dll, 5.2.3790.4455
    77b90000-77b98000: C:\WINDOWS\system32\VERSION.dll, 5.2.3790.3959
    77ba0000-77bfa000: C:\WINDOWS\system32\msvcrt.dll, 7.0.3790.3959
    71bb0000-71bb9000: C:\WINDOWS\system32\WSOCK32.dll, 5.2.3790.0
    71c00000-71c17000: C:\WINDOWS\system32\WS2_32.dll, 5.2.3790.3959
    71bf0000-71bf8000: C:\WINDOWS\system32\WS2HELP.dll, 5.2.3790.3959
    003e0000-003e6000: C:\siebel\siebsrvr\BIN\libarm.dll, 811.10.822.3
    00550000-005d5000: C:\siebel\siebsrvr\BIN\sslcsym.dll, 811.11.822.4
    7c3a0000-7c41b000: C:\siebel\siebsrvr\BIN\MSVCP71.dll, 7.10.3077.0
    005e0000-005f1000: C:\siebel\siebsrvr\BIN\sslccore.dll, 811.11.822.4
    00600000-00618000: C:\siebel\siebsrvr\BIN\sslcosd.dll, 811.11.822.4
    00620000-00645000: C:\siebel\siebsrvr\BIN\sslcrsa.dll, 811.11.822.4
    00650000-0067f000: C:\siebel\siebsrvr\BIN\sslcscr.dll, 811.11.822.4
    00680000-007cf000: C:\siebel\siebsrvr\BIN\sslcsrd.dll, 811.11.822.4
    007d0000-0082b000: C:\siebel\siebsrvr\BIN\sslcscc.dll, 811.11.822.4
    003f0000-003ff000: C:\siebel\siebsrvr\BIN\sslcevt.dll, 811.11.822.4
    00830000-00840000: C:\siebel\siebsrvr\BIN\sslcsobj.dll, 811.11.822.4
    00840000-00850000: C:\siebel\siebsrvr\BIN\sslcsnns.dll, 811.11.822.4
    00850000-00931000: C:\siebel\siebsrvr\BIN\sslcnapi.dll, 811.11.822.4
    00940000-00954000: C:\siebel\siebsrvr\BIN\sslcns.dll, 811.11.822.4
    00960000-00968000: C:\siebel\siebsrvr\BIN\sslcsnsc.dll, 811.11.822.4
    00970000-0097b000: C:\siebel\siebsrvr\BIN\ssscsmi.dll, 811.11.822.4
    00980000-00991000: C:\siebel\siebsrvr\BIN\sslcsrvr.dll, 811.11.822.4
    009a0000-009bb000: C:\siebel\siebsrvr\BIN\sslcos.dll, 811.11.822.4
    009c0000-00a5f000: C:\siebel\siebsrvr\BIN\sscfcmn.dll, 811.11.822.4
    7c8d0000-7d0cf000: C:\WINDOWS\system32\SHELL32.dll, 6.0.3790.5018
    7d180000-7d1d2000: C:\WINDOWS\system32\SHLWAPI.dll, 6.0.3790.5318
    77670000-777aa000: C:\WINDOWS\system32\ole32.dll, 5.2.3790.5209
    7d0e0000-7d16c000: C:\WINDOWS\system32\OLEAUT32.dll, 5.2.3790.5464
    761b0000-76245000: C:\WINDOWS\system32\CRYPT32.dll, 5.131.3790.5235
    76190000-761a2000: C:\WINDOWS\system32\MSASN1.dll, 5.2.3790.4584
    77210000-772bb000: C:\WINDOWS\system32\WININET.dll, 6.0.3790.5467
    00a60000-00a70000: C:\siebel\siebsrvr\BIN\sslczlib.dll, 811.11.822.4
    00a70000-00b72000: C:\siebel\siebsrvr\BIN\MFC71U.DLL, 7.10.3077.0
    00b80000-00b88000: C:\siebel\siebsrvr\BIN\sslcsnsr.dll, 811.11.822.4
    00b90000-00b99000: C:\siebel\siebsrvr\BIN\sslcsrtr.dll, 811.11.822.4
    00ba0000-00baf000: C:\siebel\siebsrvr\BIN\sslcsrms.dll, 811.11.822.4
    00bb0000-00bb6000: C:\siebel\siebsrvr\BIN\sslcsssm.dll, 811.11.822.4
    00bc0000-00bd1000: C:\siebel\siebsrvr\BIN\sslcsrcn.dll, 811.11.822.4
    00be0000-00be7000: C:\siebel\siebsrvr\BIN\sslcsysstat.dll, 811.11.822.4
    00fe0000-0100d000: C:\siebel\siebsrvr\BIN\sslcrsa256.dll, 8.1.1.5
    77420000-77523000: C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.5190_x-ww_319264BE\comctl32.dll, 6.0.3790.5190
    5d360000-5d36e000: C:\siebel\siebsrvr\BIN\MFC71ENU.DLL, 7.10.3077.0
    76b70000-76b7b000: C:\WINDOWS\system32\psapi.dll, 5.2.3790.3959
    012b0000-012c0000: C:\siebel\siebsrvr\BIN\sslcasrv.dll, 811.11.822.4
    012c0000-01328000: C:\siebel\siebsrvr\BIN\sslcsrs.dll, 811.11.822.4
    01330000-0133a000: C:\siebel\siebsrvr\BIN\sslcntfy.dll, 811.11.822.4
    01740000-01746000: C:\siebel\siebsrvr\BIN\enu\srcf.dll, 811.9.822.2
    01750000-01756000: C:\siebel\siebsrvr\BIN\enu\srcfapps.dll, 811.9.822.2
    01760000-01766000: C:\siebel\siebsrvr\BIN\sbcf.dll, 811.9.822.2
    01770000-01776000: C:\siebel\siebsrvr\BIN\sbcfapps.dll, 811.9.822.2
    01780000-01791000: C:\siebel\siebsrvr\BIN\sssasos.dll, 811.11.822.4
    017a0000-017a8000: C:\siebel\siebsrvr\BIN\sslcom.dll, 811.11.822.4
    017b0000-017be000: C:\siebel\siebsrvr\BIN\sslcsnom.dll, 811.11.822.4
    017c0000-017f8000: C:\siebel\siebsrvr\BIN\sstcsiom.dll, 811.11.822.4
    020f0000-021f0000: C:\siebel\siebsrvr\BIN\sscfom.dll, 811.11.822.4
    021f0000-022ef000: C:\siebel\siebsrvr\BIN\sslcsc.dll, 811.11.822.4
    022f0000-0236f000: C:\siebel\siebsrvr\BIN\sslcdb.dll, 811.11.822.4
    4bf70000-4bfae000: C:\WINDOWS\system32\ODBC32.dll, 3.526.4795.0
    77530000-775c7000: C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_5.82.3790.5190_x-ww_D21E1F39\COMCTL32.dll, 5.82.3790.5190
    762b0000-762f9000: C:\WINDOWS\system32\comdlg32.dll, 6.0.3790.3959
    01800000-0180b000: C:\siebel\siebsrvr\BIN\sscadsecr.dll, 811.11.822.4
    02370000-0237d000: C:\siebel\siebsrvr\BIN\sslclm.dll, 811.11.822.4
    02380000-0239c000: C:\siebel\siebsrvr\BIN\sslcupg.dll, 811.11.822.4
    023a0000-023ba000: C:\siebel\siebsrvr\BIN\sslcsecm.dll, 811.11.822.4
    023c0000-023ef000: C:\siebel\siebsrvr\BIN\sscfel.dll, 811.11.822.4
    023f0000-026b0000: C:\siebel\siebsrvr\BIN\sscfdm.dll, 811.11.822.4
    026b0000-026bd000: C:\siebel\siebsrvr\BIN\sslcfsm.dll, 811.11.822.4
    026c0000-026c8000: C:\siebel\siebsrvr\BIN\sslcsecc.dll, 811.11.822.4
    026d0000-026e1000: C:\siebel\siebsrvr\BIN\sslccachev2.dll, 811.11.822.4
    026f0000-026f9000: C:\siebel\siebsrvr\BIN\sslcmsgagent.dll, 811.11.822.4
    02bd0000-02be7000: C:\WINDOWS\system32\odbcint.dll, 3.526.3959.0
    02bf0000-02c23000: C:\siebel\siebsrvr\BIN\sslcrsa56.dll, 811.11.822.4
    71b20000-71b61000: C:\WINDOWS\System32\mswsock.dll, 5.2.3790.4318
    76ed0000-76efa000: C:\WINDOWS\system32\DNSAPI.dll, 5.2.3790.4840
    76f70000-76f77000: C:\WINDOWS\System32\winrnr.dll, 5.2.3790.3959
    76f10000-76f3e000: C:\WINDOWS\system32\WLDAP32.dll, 5.2.3790.3959
    76f80000-76f85000: C:\WINDOWS\system32\rasadhlp.dll, 5.2.3790.3959
    5f270000-5f2ca000: C:\WINDOWS\system32\hnetcfg.dll, 5.2.3790.3959
    71ae0000-71ae8000: C:\WINDOWS\System32\wshtcpip.dll, 5.2.3790.3959
    0ae80000-0af6a000: C:\siebel\siebsrvr\BIN\eBaySecAda.dll
    76920000-769e2000: C:\WINDOWS\system32\userenv.dll, 5.2.3790.3959
    71c40000-71c97000: C:\WINDOWS\system32\netapi32.dll, 5.2.3790.5030
    76bb0000-76bdc000: C:\WINDOWS\system32\wintrust.dll, 5.131.3790.5060
    76c10000-76c3a000: C:\WINDOWS\system32\imagehlp.dll, 5.2.3790.5240
    76750000-76779000: C:\WINDOWS\system32\schannel.dll, 5.2.3790.5462
    76e90000-76ecf000: C:\WINDOWS\system32\RASAPI32.DLL, 5.2.3790.3959
    76e40000-76e52000: C:\WINDOWS\system32\rasman.dll, 5.2.3790.3959
    76e60000-76e8f000: C:\WINDOWS\system32\TAPI32.dll, 5.2.3790.3959
    76e30000-76e3c000: C:\WINDOWS\system32\rtutils.dll, 5.2.3790.3959
    76aa0000-76acd000: C:\WINDOWS\system32\WINMM.dll, 5.2.3790.4916
    722f0000-722f5000: C:\WINDOWS\system32\sensapi.dll, 5.2.3790.3959
    772c0000-77371000: C:\WINDOWS\system32\urlmon.dll, 6.0.3790.5467
    68000000-68035000: C:\WINDOWS\system32\rsaenh.dll, 5.2.3790.3959
    68100000-68127000: C:\WINDOWS\system32\dssenh.dll, 5.2.3790.3959
    0b300000-0b31a000: C:\siebel\siebsrvr\BIN\sscdo90.dll, 811.11.822.4
    0b320000-0b3a2000: C:\oracle\product\11.1.0\client_1\bin\OCI.dll, 11.1.0.1
    61c20000-61f81000: C:\oracle\product\11.1.0\client_1\bin\OraClient11.Dll, 11.1.0.7
    60870000-6095b000: C:\oracle\product\11.1.0\client_1\bin\oracore11.dll, 11.1.0.7
    60a80000-60b4e000: C:\oracle\product\11.1.0\client_1\bin\oranls11.dll, 11.1.0.7
    63690000-636a8000: C:\oracle\product\11.1.0\client_1\bin\oraunls11.dll, 11.1.0.7
    60eb0000-60eb7000: C:\oracle\product\11.1.0\client_1\bin\orauts.dll, 11.1.0.7
    636b0000-636b6000: C:\oracle\product\11.1.0\client_1\bin\oravsn11.dll, 11.1.0.7
    60fa0000-61158000: C:\oracle\product\11.1.0\client_1\bin\oracommon11.dll, 11.1.0.7
    63430000-6345d000: C:\oracle\product\11.1.0\client_1\bin\orasnls11.dll, 11.1.0.7
    0b3b0000-0be77000: C:\oracle\product\11.1.0\client_1\bin\orageneric11.dll, 11.1.0.7
    0be80000-0c0dc000: C:\oracle\product\11.1.0\client_1\bin\oraxml11.dll, 11.1.0.7
    60020000-60030000: C:\WINDOWS\system32\MSVCIRT.dll, 7.0.3790.0
    0c0e0000-0c4b2000: C:\oracle\product\11.1.0\client_1\bin\oran11.dll, 11.1.0.6
    62740000-627a3000: C:\oracle\product\11.1.0\client_1\bin\oranl11.dll, 11.1.0.6
    62980000-629b1000: C:\oracle\product\11.1.0\client_1\bin\orantcp11.dll, 11.1.0.6
    0c4c0000-0c507000: C:\oracle\product\11.1.0\client_1\bin\oranldap11.dll, 11.1.0.6
    627f0000-62905000: C:\oracle\product\11.1.0\client_1\bin\orannzsbb11.dll, 11.1.0.6
    62530000-6266d000: C:\oracle\product\11.1.0\client_1\bin\oraldapclnt11.dll, 11.1.0.7
    62670000-6268b000: C:\oracle\product\11.1.0\client_1\bin\orancrypt11.dll, 11.1.0.6
    0c510000-0c643000: C:\oracle\product\11.1.0\client_1\bin\orazt11.dll, 11.1.0.6
    76cf0000-76d0a000: C:\WINDOWS\system32\iphlpapi.dll, 5.2.3790.3959
    62920000-6296d000: C:\oracle\product\11.1.0\client_1\bin\oranro11.dll, 11.1.0.6
    626b0000-626b9000: C:\oracle\product\11.1.0\client_1\bin\oranhost11.dll, 11.1.0.6
    0c650000-0c656000: C:\oracle\product\11.1.0\client_1\bin\orancds11.dll, 11.1.0.6
    629c0000-629cd000: C:\oracle\product\11.1.0\client_1\bin\orantns11.dll, 11.1.0.6
    0c660000-0c6e0000: C:\oracle\product\11.1.0\client_1\bin\oraztkg11.dll, 11.1.0.6
    0c6e0000-0caba000: C:\oracle\product\11.1.0\client_1\bin\orapls11.dll, 11.1.0.7
    63420000-63429000: C:\oracle\product\11.1.0\client_1\bin\oraslax11.dll, 11.1.0.6
    63080000-63296000: C:\oracle\product\11.1.0\client_1\bin\oraplp11.dll, 11.1.0.7
    0cac0000-0cb6d000: C:\oracle\product\11.1.0\client_1\bin\orahasgen11.dll, 11.1.0.6
    62ab0000-62b2f000: C:\oracle\product\11.1.0\client_1\bin\oraocr11.dll, 11.1.0.6
    0cb70000-0cbce000: C:\oracle\product\11.1.0\client_1\bin\oraocrb11.dll, 11.1.0.6
    6d580000-6d628000: C:\WINDOWS\system32\dbghelp.dll, 5.2.3790.3959
    63520000-635c2000: C:\oracle\product\11.1.0\client_1\bin\orasql11.dll, 11.1.0.7
    63060000-63074000: C:\oracle\product\11.1.0\client_1\bin\OraPlc11.Dll, 11.1.0.7
    0cde0000-0cde6000: C:\siebel\siebsrvr\BIN\sslcdbgengw.dll, 811.11.822.4
    0ce30000-0ce4c000: C:\siebel\siebsrvr\BIN\sscfomlg.dll, 811.11.822.4
    0ce60000-0cffb000: C:\siebel\siebsrvr\BIN\sscfcli.dll, 811.11.822.4
    0d070000-0d11d000: C:\siebel\siebsrvr\BIN\sscacmbc.dll, 811.11.822.4
    209c0000-20a7e000: C:\siebel\siebsrvr\BIN\SSCABCBC.DLL, 811.11.822.4
    20cc0000-20d19000: C:\siebel\siebsrvr\BIN\SSCACCBC.DLL, 811.11.822.4
    212d0000-212ec000: C:\siebel\siebsrvr\BIN\sscapsppricersvc.dll, 811.11.822.4
    20060000-2059a000: C:\siebel\siebsrvr\BIN\sscaswbc.dll, 811.11.822.4
    21690000-21704000: C:\siebel\siebsrvr\BIN\SSCMSVC.DLL, 811.11.822.4
    215a0000-2166c000: C:\siebel\siebsrvr\BIN\SSCMCLNT.DLL, 811.11.822.4
    21740000-2179e000: C:\siebel\siebsrvr\BIN\sscmcfgsvc.dll, 811.11.822.4
    0d010000-0d025000: C:\siebel\siebsrvr\BIN\SSCASRMS.DLL, 811.11.822.4
    0d030000-0d070000: C:\siebel\siebsrvr\BIN\sscaadbc.dll, 811.11.822.4
    21590000-2159d000: C:\siebel\siebsrvr\BIN\SSCFHIMS.DLL, 811.11.822.4
    22490000-224aa000: C:\siebel\siebsrvr\BIN\SSCASSMC.DLL, 811.11.822.4
    222d0000-22371000: C:\siebel\siebsrvr\BIN\sscacabc.dll, 811.11.822.4
    224b0000-224ec000: C:\siebel\siebsrvr\BIN\SSCASVBC.DLL, 811.11.822.4
    22be0000-22c24000: C:\siebel\siebsrvr\BIN\swcahcfr.dll, 811.11.822.4
    22aa0000-22b54000: C:\siebel\siebsrvr\BIN\SWCACAFR.DLL, 811.11.822.4
    22c30000-22ca0000: C:\siebel\siebsrvr\BIN\SSCAXMLPWFR.DLL, 811.11.822.4
    22ed0000-22f8c000: C:\siebel\siebsrvr\BIN\SSDTBC.DLL, 811.11.822.4
    22a80000-22a9f000: C:\siebel\siebsrvr\BIN\SSCACTBC.DLL, 811.11.822.4
    23040000-230c1000: C:\siebel\siebsrvr\BIN\SWCASIFR.DLL, 811.11.822.4
    211b0000-211cd000: C:\siebel\siebsrvr\BIN\swcacmfr.dll, 811.11.822.4
    21f60000-21f6d000: C:\siebel\siebsrvr\BIN\SSLCKM.DLL, 811.11.822.4
    22060000-220ca000: C:\siebel\siebsrvr\BIN\SSCANSHSV.DLL, 811.11.822.4
    21b20000-21b9d000: C:\siebel\siebsrvr\BIN\SWCANSHFR.DLL, 811.11.822.4
    21af0000-21b1a000: C:\siebel\siebsrvr\BIN\SSCANSHBC.DLL, 811.11.822.4
    21f80000-21fc9000: C:\siebel\siebsrvr\BIN\sWcasvfr.dll, 811.11.822.4
    22170000-22202000: C:\siebel\siebsrvr\BIN\SSFAFCBC.DLL, 811.11.822.4
    23580000-235c4000: C:\siebel\siebsrvr\BIN\SSCAPRMSV.DLL, 811.11.822.4
    22020000-2203e000: C:\siebel\siebsrvr\BIN\SSCAEITE.DLL, 811.11.822.4
    1ff20000-2005a000: C:\siebel\siebsrvr\BIN\sscafwsv.dll, 811.11.822.4
    22d40000-22ea8000: C:\siebel\siebsrvr\BIN\sscaeiwm.dll, 811.11.822.4
    22d10000-22d3e000: C:\siebel\siebsrvr\BIN\SSCAEIWO.DLL, 811.11.822.4
    23780000-2378b000: C:\siebel\siebsrvr\BIN\SSCAEILM.DLL, 811.11.822.4
    23790000-237e3000: C:\siebel\siebsrvr\BIN\SSCAEISA.DLL, 811.11.822.4
    22560000-22652000: C:\siebel\siebsrvr\BIN\SSCASPBC.DLL, 811.11.822.4
    23880000-23897000: C:\siebel\siebsrvr\BIN\sscafssvactcache.dll, 811.11.822.4
    239a0000-23a89000: C:\siebel\siebsrvr\BIN\SSCOMMSV.DLL, 811.11.822.4
    036c0000-0372a000: C:\siebel\siebsrvr\BIN\SSCHATBS.DLL, 811.11.822.4
    22770000-227c1000: C:\siebel\siebsrvr\BIN\sscasabc.dll, 811.11.822.4
    23b30000-23b4c000: C:\siebel\siebsrvr\BIN\SSFACMBC.DLL, 811.11.822.4
    23b50000-23b64000: C:\siebel\siebsrvr\BIN\SSFACMSV.DLL, 811.11.822.4
    23ea0000-23eef000: C:\siebel\siebsrvr\BIN\sscacmuinsv.dll, 811.11.822.4
    23490000-234f6000: C:\siebel\siebsrvr\BIN\SWCAFSFR.DLL, 811.11.822.4
    21a80000-21aa5000: C:\siebel\siebsrvr\BIN\SSCASHSV.DLL, 811.11.822.4
    21eb0000-21edd000: C:\siebel\siebsrvr\BIN\SSCASHBC.DLL, 811.11.822.4
    21ee0000-21f2f000: C:\siebel\siebsrvr\BIN\SWCASHFR.DLL, 811.11.822.4
    211d0000-211ee000: C:\siebel\siebsrvr\BIN\sscaxmbc.dll, 811.11.822.4
    23ef0000-23f41000: C:\siebel\siebsrvr\BIN\SWCACGFR.DLL, 811.11.822.4
    22140000-22170000: C:\siebel\siebsrvr\BIN\SSCATASV.DLL, 811.11.822.4
    21220000-212c8000: C:\siebel\siebsrvr\BIN\swcabcfr.dll, 811.11.822.4
    23bd0000-23bf4000: C:\siebel\siebsrvr\BIN\sscasasv.dll, 811.11.822.4
    23b90000-23ba6000: C:\siebel\siebsrvr\BIN\SSCAEIXQ.DLL, 811.11.822.4
    24860000-24929000: C:\siebel\siebsrvr\BIN\swcaspsv.dll, 811.11.822.4
    04080000-0408b000: C:\siebel\siebsrvr\BIN\SSCFUREC.DLL, 811.11.822.4
    Heap status          : ok
    Total physical memory: 50320576 KB
    Free physical memory : 35138076 KB
    Paging file size     : 51918740 KB
    Available paging size: 36997428 KB
    Virtual memory info:
    Total              : 2097024 KB
    Available          : 836420 KB
    Available extendent: 0 KB
    Assert failure count : 1595991
    Command line         : siebmtshmw.exe C:\siebel\siebsrvr\admin\siebprodent.pxsblaom026.shm 33 0 1 5 0 ENU 0 0
    Current directory    : C:\siebel\siebsrvr\BIN
    Executable           : C:\siebel\siebsrvr\BIN\siebmtshmw.exe
    Current time         : 01/19/2015 10:52:32:099
    CCF Version          : 8.1.1.10 SIA [23017] LANG_INDEPENDENT
    CCF Compiled On      : Jan 21 2013 18:06:00
    Would approciate if anyone could provide some inputs on the same..
    Thanks
    Ruban

    Hi,
    We recently upgraded to Oracle RAC database to support Siebel Call Center APplication (8.1.1.11.12 [IP2013]).Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    Frequently we are facing problem of crashing with the Nodes in RAC (Kernal Panic). Due to this users using siebel application are unstable and facing multiple issues Once we restore Siebel Gateway and restart of AOM server fixing the issue.
    Below are the SQL's and Crashing Signature we are seeing du to this crash.
    DBCLog DBCLogError 1 00081f1254bb0ad4:1423830 2015-01-18 11:49:20 OCIStmtExecute: SELECT
    T2.CONFLICT_ID,
    T2.LAST_UPD,
    T2.CREATED,
    T2.LAST_UPD_BY,
    T2.CREATED_BY,
    T2.MODIFICATION_NUM,
    T2.ROW_ID,
    T2.EFF_START_TS,
    T2.EFF_END_TS,
    T2.NAME,
    T2.BUSOBJ_NAME,
    T2.VERSION,
    T2.DEPLOY_STATUS_CD,
    T2.MODE_CD
    FROM
    SIEBEL.S_LST_OF_VAL T1,
    SIEBEL.S_WFA_DPLOY_DEF T2
    WHERE
    T2.DEPLOY_STATUS_CD = T1.NAME AND T1.TYPE = 'WFA_DPLY_STAT_CD' AND T1.LANG_ID = :1 AND
    (T2.TYPE_CD IN ( :2 )) AND
    (T2.NAME = :3 AND T2.DEPLOY_STATUS_CD IN ( :4 ) AND (T2.EFF_END_TS > TO_DATE(:5,'MM/DD/YYYY HH24:MI:SS') OR T2.EFF_END_TS IS NULL))
    ORDER BY
    T2.NAME, T1.VAL
    ObjMgrLog Error 1 00081f1254bb0ad4:1423830 2015-01-18 11:49:20 (oracon.cpp (3896)) SBL-DBC-00105: An error has occurred executing a Sql statement.
    Please continue or ask your systems administrator to check your application configuration if the problem persists.
    and Crash Signature Looks like below
    Exception 0xc0000005 at 0x006500f6
    Thread: 0x00002700, Process 0x00000254
    Thread: 9984, Process 596
    - CONTEXT -
    EIP: 0x00000000, EFL: 0x00010246, FS:  0x0000003b, GS:  0x00000000
    CS:  0x0000001b, DS:  0x00000023, SS:  0x00000023, ES:  0x00000023
    EAX: 0x1a511968, EBX: 0x294ca048, ECX: 0x4cc50008, EDX: 0x3a2ad200
    ESI: 0x4cc50008, EDI: 0x00000000, EBP: 0x00000000, ESP: 0x3a2afff4
    - CALL STACK -
    sslcscr +0xf6
    sscfcmn +0x19050 = CSSObjectBase::CopyErrorMsg() +0xf0
    sscfcmn +0x1950d = CSSObjectBase::DoSetErrorMsg() +0x13d
    sscfcmn +0x19bb5 = CSSObjectBase::SetErrorMsg() +0xa5
    SSFACMBC +0x34a6 = CSSFABCVRec::IsBusinessProcessActive() +0x3b6
    SSFACMBC +0x5133 = CSSFABCVRec::VBCCreate() +0x1e3
    sscfom +0x71d1e = CSSBCVRec::SqlCreate() +0xde
    sscfom +0x4aea = CSSModel::ConstructBusComp() +0xaa
    sscfom +0x653f5 = CSSBusObj::GetBusComp() +0x265
    sscfom +0x65a18 = CSSBusObj::GetBusComp() +0x18
    sscfom +0x13ad8 = CSSModel::BeginSetupView() +0x418
    sscfom +0x13dee = CSSModel::BeginSetupView() +0x5e
    sscaswbc +0x8b070 = CSSSWEUdfLoader::BeginSetupView() +0x30
    sscaswbc +0xe3d88 = CSSSWEFrameMgrInternal::BuildView() +0x1618
    sscaswbc +0xe5646 = CSSSWEFrameMgrInternal::BuildView() +0x36
    sscaswbc +0xb8343 = CSSSWEActionMgr::ActionBuildViewAsync() +0x293
    sscaswbc +0xb873b = CSSSWEActionMgr::DoPostedAction() +0xab
    sscaswbc +0xb9287 = CSSSWEActionMgr::CheckPostedActions() +0x3d7
    sscaswbc +0xe6d41 = CSSSWEFrameMgrInternal::InvokeAppletMethod() +0x11b1
    sscaswbc +0xbbcdc = CSSSWECmdProcessor::InvokeMethod() +0x74c
    sscaswbc +0xc1495 = CSSSWECmdProcessor::_ProcessCommand() +0x725
    sscaswbc +0xc27f8 = CSSSWECmdProcessor::ProcessCommand() +0xab8
    sscaswbc +0xc2d04 = CSSSWECmdProcessor::ProcessCommand() +0xc4
    sscaswbc +0x265559 = CSSServiceSWEIface::Request() +0x309
    sscaswbc +0x267391 = CSSServiceSWEIface::DoInvokeMethod() +0xed1
    sscfom +0x1976c = CSSService::InvokeMethod() +0x24c
    sstcsiom +0x6d6a = CSSSIOMSession::ModInvokeSrvcMethod() +0x10a
    sstcsiom +0x7613 = CSSSIOMSession::RPCMiscModel() +0x513
    sstcsiom +0xe9dd = CSSSIOMSession::HandleRPC() +0x3ad
    sssasos +0x6616 = CompCleanup() +0x3be6
    sssasos +0x5a95 = CompCleanup() +0x3065
    sssasos +0x1a35 = CSSSISObject::operator=() +0x9f5
    sssasos +0x2135 = CompHandleMsg() +0x485
    siebmtshmw +0x494e
    siebmtshmw +0x20051 = GetSmiTaskAPI() +0x6d21
    siebmtshmw +0x239d1 = SmiInProcMsgHandler() +0x2051
    siebmtshmw +0x15f15 = SmiBeginTrace() +0x3195
    siebmtshmw +0x174cf = GetSmiWorkQObj() +0x148f
    siebmtshmw +0xc7f7 = SmiCleanupDetTask() +0x3be7
    sslcosd +0x2152 = OSDThreadPrivIsInit() +0x1d2
    sslcosd +0x21dc = OSDThreadPrivIsInit() +0x25c
    MSVCR71 +0x9565 = endthreadex() +0xa0
    kernel32 +0x2484f = GetModuleHandleA() +0xdf
    - STACK DUMP -
    - MODULE LIST -
    00400000-00445000: C:\siebel\siebsrvr\BIN\siebmtshmw.exe, 811.11.822.4
    7c800000-7c8c3000: C:\WINDOWS\system32\ntdll.dll, 5.2.3790.4937
    77e40000-77f44000: C:\WINDOWS\system32\kernel32.dll, 5.2.3790.5295
    10000000-10025000: C:\siebel\siebsrvr\BIN\ssscsci.dll, 811.11.822.4
    00320000-003cc000: C:\siebel\siebsrvr\BIN\ssscscf.dll, 811.11.822.4
    003d0000-003d7000: C:\siebel\siebsrvr\BIN\sslcosa.dll, 811.11.822.4
    7c340000-7c396000: C:\siebel\siebsrvr\BIN\MSVCR71.dll, 7.10.3052.4
    00450000-0054d000: C:\siebel\siebsrvr\BIN\sslcshar.dll, 811.11.822.4
    77380000-77411000: C:\WINDOWS\system32\USER32.dll, 5.2.3790.4033
    77c00000-77c49000: C:\WINDOWS\system32\GDI32.dll, 5.2.3790.5398
    7d1e0000-7d27c000: C:\WINDOWS\system32\ADVAPI32.dll, 5.2.3790.4455
    77c50000-77cf1000: C:\WINDOWS\system32\RPCRT4.dll, 5.2.3790.5254
    76f50000-76f63000: C:\WINDOWS\system32\Secur32.dll, 5.2.3790.4455
    77b90000-77b98000: C:\WINDOWS\system32\VERSION.dll, 5.2.3790.3959
    77ba0000-77bfa000: C:\WINDOWS\system32\msvcrt.dll, 7.0.3790.3959
    71bb0000-71bb9000: C:\WINDOWS\system32\WSOCK32.dll, 5.2.3790.0
    71c00000-71c17000: C:\WINDOWS\system32\WS2_32.dll, 5.2.3790.3959
    71bf0000-71bf8000: C:\WINDOWS\system32\WS2HELP.dll, 5.2.3790.3959
    003e0000-003e6000: C:\siebel\siebsrvr\BIN\libarm.dll, 811.10.822.3
    00550000-005d5000: C:\siebel\siebsrvr\BIN\sslcsym.dll, 811.11.822.4
    7c3a0000-7c41b000: C:\siebel\siebsrvr\BIN\MSVCP71.dll, 7.10.3077.0
    005e0000-005f1000: C:\siebel\siebsrvr\BIN\sslccore.dll, 811.11.822.4
    00600000-00618000: C:\siebel\siebsrvr\BIN\sslcosd.dll, 811.11.822.4
    00620000-00645000: C:\siebel\siebsrvr\BIN\sslcrsa.dll, 811.11.822.4
    00650000-0067f000: C:\siebel\siebsrvr\BIN\sslcscr.dll, 811.11.822.4
    00680000-007cf000: C:\siebel\siebsrvr\BIN\sslcsrd.dll, 811.11.822.4
    007d0000-0082b000: C:\siebel\siebsrvr\BIN\sslcscc.dll, 811.11.822.4
    003f0000-003ff000: C:\siebel\siebsrvr\BIN\sslcevt.dll, 811.11.822.4
    00830000-00840000: C:\siebel\siebsrvr\BIN\sslcsobj.dll, 811.11.822.4
    00840000-00850000: C:\siebel\siebsrvr\BIN\sslcsnns.dll, 811.11.822.4
    00850000-00931000: C:\siebel\siebsrvr\BIN\sslcnapi.dll, 811.11.822.4
    00940000-00954000: C:\siebel\siebsrvr\BIN\sslcns.dll, 811.11.822.4
    00960000-00968000: C:\siebel\siebsrvr\BIN\sslcsnsc.dll, 811.11.822.4
    00970000-0097b000: C:\siebel\siebsrvr\BIN\ssscsmi.dll, 811.11.822.4
    00980000-00991000: C:\siebel\siebsrvr\BIN\sslcsrvr.dll, 811.11.822.4
    009a0000-009bb000: C:\siebel\siebsrvr\BIN\sslcos.dll, 811.11.822.4
    009c0000-00a5f000: C:\siebel\siebsrvr\BIN\sscfcmn.dll, 811.11.822.4
    7c8d0000-7d0cf000: C:\WINDOWS\system32\SHELL32.dll, 6.0.3790.5018
    7d180000-7d1d2000: C:\WINDOWS\system32\SHLWAPI.dll, 6.0.3790.5318
    77670000-777aa000: C:\WINDOWS\system32\ole32.dll, 5.2.3790.5209
    7d0e0000-7d16c000: C:\WINDOWS\system32\OLEAUT32.dll, 5.2.3790.5464
    761b0000-76245000: C:\WINDOWS\system32\CRYPT32.dll, 5.131.3790.5235
    76190000-761a2000: C:\WINDOWS\system32\MSASN1.dll, 5.2.3790.4584
    77210000-772bb000: C:\WINDOWS\system32\WININET.dll, 6.0.3790.5467
    00a60000-00a70000: C:\siebel\siebsrvr\BIN\sslczlib.dll, 811.11.822.4
    00a70000-00b72000: C:\siebel\siebsrvr\BIN\MFC71U.DLL, 7.10.3077.0
    00b80000-00b88000: C:\siebel\siebsrvr\BIN\sslcsnsr.dll, 811.11.822.4
    00b90000-00b99000: C:\siebel\siebsrvr\BIN\sslcsrtr.dll, 811.11.822.4
    00ba0000-00baf000: C:\siebel\siebsrvr\BIN\sslcsrms.dll, 811.11.822.4
    00bb0000-00bb6000: C:\siebel\siebsrvr\BIN\sslcsssm.dll, 811.11.822.4
    00bc0000-00bd1000: C:\siebel\siebsrvr\BIN\sslcsrcn.dll, 811.11.822.4
    00be0000-00be7000: C:\siebel\siebsrvr\BIN\sslcsysstat.dll, 811.11.822.4
    00fe0000-0100d000: C:\siebel\siebsrvr\BIN\sslcrsa256.dll, 8.1.1.5
    77420000-77523000: C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.5190_x-ww_319264BE\comctl32.dll, 6.0.3790.5190
    5d360000-5d36e000: C:\siebel\siebsrvr\BIN\MFC71ENU.DLL, 7.10.3077.0
    76b70000-76b7b000: C:\WINDOWS\system32\psapi.dll, 5.2.3790.3959
    012b0000-012c0000: C:\siebel\siebsrvr\BIN\sslcasrv.dll, 811.11.822.4
    012c0000-01328000: C:\siebel\siebsrvr\BIN\sslcsrs.dll, 811.11.822.4
    01330000-0133a000: C:\siebel\siebsrvr\BIN\sslcntfy.dll, 811.11.822.4
    01740000-01746000: C:\siebel\siebsrvr\BIN\enu\srcf.dll, 811.9.822.2
    01750000-01756000: C:\siebel\siebsrvr\BIN\enu\srcfapps.dll, 811.9.822.2
    01760000-01766000: C:\siebel\siebsrvr\BIN\sbcf.dll, 811.9.822.2
    01770000-01776000: C:\siebel\siebsrvr\BIN\sbcfapps.dll, 811.9.822.2
    01780000-01791000: C:\siebel\siebsrvr\BIN\sssasos.dll, 811.11.822.4
    017a0000-017a8000: C:\siebel\siebsrvr\BIN\sslcom.dll, 811.11.822.4
    017b0000-017be000: C:\siebel\siebsrvr\BIN\sslcsnom.dll, 811.11.822.4
    017c0000-017f8000: C:\siebel\siebsrvr\BIN\sstcsiom.dll, 811.11.822.4
    020f0000-021f0000: C:\siebel\siebsrvr\BIN\sscfom.dll, 811.11.822.4
    021f0000-022ef000: C:\siebel\siebsrvr\BIN\sslcsc.dll, 811.11.822.4
    022f0000-0236f000: C:\siebel\siebsrvr\BIN\sslcdb.dll, 811.11.822.4
    4bf70000-4bfae000: C:\WINDOWS\system32\ODBC32.dll, 3.526.4795.0
    77530000-775c7000: C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_5.82.3790.5190_x-ww_D21E1F39\COMCTL32.dll, 5.82.3790.5190
    762b0000-762f9000: C:\WINDOWS\system32\comdlg32.dll, 6.0.3790.3959
    01800000-0180b000: C:\siebel\siebsrvr\BIN\sscadsecr.dll, 811.11.822.4
    02370000-0237d000: C:\siebel\siebsrvr\BIN\sslclm.dll, 811.11.822.4
    02380000-0239c000: C:\siebel\siebsrvr\BIN\sslcupg.dll, 811.11.822.4
    023a0000-023ba000: C:\siebel\siebsrvr\BIN\sslcsecm.dll, 811.11.822.4
    023c0000-023ef000: C:\siebel\siebsrvr\BIN\sscfel.dll, 811.11.822.4
    023f0000-026b0000: C:\siebel\siebsrvr\BIN\sscfdm.dll, 811.11.822.4
    026b0000-026bd000: C:\siebel\siebsrvr\BIN\sslcfsm.dll, 811.11.822.4
    026c0000-026c8000: C:\siebel\siebsrvr\BIN\sslcsecc.dll, 811.11.822.4
    026d0000-026e1000: C:\siebel\siebsrvr\BIN\sslccachev2.dll, 811.11.822.4
    026f0000-026f9000: C:\siebel\siebsrvr\BIN\sslcmsgagent.dll, 811.11.822.4
    02bd0000-02be7000: C:\WINDOWS\system32\odbcint.dll, 3.526.3959.0
    02bf0000-02c23000: C:\siebel\siebsrvr\BIN\sslcrsa56.dll, 811.11.822.4
    71b20000-71b61000: C:\WINDOWS\System32\mswsock.dll, 5.2.3790.4318
    76ed0000-76efa000: C:\WINDOWS\system32\DNSAPI.dll, 5.2.3790.4840
    76f70000-76f77000: C:\WINDOWS\System32\winrnr.dll, 5.2.3790.3959
    76f10000-76f3e000: C:\WINDOWS\system32\WLDAP32.dll, 5.2.3790.3959
    76f80000-76f85000: C:\WINDOWS\system32\rasadhlp.dll, 5.2.3790.3959
    5f270000-5f2ca000: C:\WINDOWS\system32\hnetcfg.dll, 5.2.3790.3959
    71ae0000-71ae8000: C:\WINDOWS\System32\wshtcpip.dll, 5.2.3790.3959
    0ae80000-0af6a000: C:\siebel\siebsrvr\BIN\eBaySecAda.dll
    76920000-769e2000: C:\WINDOWS\system32\userenv.dll, 5.2.3790.3959
    71c40000-71c97000: C:\WINDOWS\system32\netapi32.dll, 5.2.3790.5030
    76bb0000-76bdc000: C:\WINDOWS\system32\wintrust.dll, 5.131.3790.5060
    76c10000-76c3a000: C:\WINDOWS\system32\imagehlp.dll, 5.2.3790.5240
    76750000-76779000: C:\WINDOWS\system32\schannel.dll, 5.2.3790.5462
    76e90000-76ecf000: C:\WINDOWS\system32\RASAPI32.DLL, 5.2.3790.3959
    76e40000-76e52000: C:\WINDOWS\system32\rasman.dll, 5.2.3790.3959
    76e60000-76e8f000: C:\WINDOWS\system32\TAPI32.dll, 5.2.3790.3959
    76e30000-76e3c000: C:\WINDOWS\system32\rtutils.dll, 5.2.3790.3959
    76aa0000-76acd000: C:\WINDOWS\system32\WINMM.dll, 5.2.3790.4916
    722f0000-722f5000: C:\WINDOWS\system32\sensapi.dll, 5.2.3790.3959
    772c0000-77371000: C:\WINDOWS\system32\urlmon.dll, 6.0.3790.5467
    68000000-68035000: C:\WINDOWS\system32\rsaenh.dll, 5.2.3790.3959
    68100000-68127000: C:\WINDOWS\system32\dssenh.dll, 5.2.3790.3959
    0b300000-0b31a000: C:\siebel\siebsrvr\BIN\sscdo90.dll, 811.11.822.4
    0b320000-0b3a2000: C:\oracle\product\11.1.0\client_1\bin\OCI.dll, 11.1.0.1
    61c20000-61f81000: C:\oracle\product\11.1.0\client_1\bin\OraClient11.Dll, 11.1.0.7
    60870000-6095b000: C:\oracle\product\11.1.0\client_1\bin\oracore11.dll, 11.1.0.7
    60a80000-60b4e000: C:\oracle\product\11.1.0\client_1\bin\oranls11.dll, 11.1.0.7
    63690000-636a8000: C:\oracle\product\11.1.0\client_1\bin\oraunls11.dll, 11.1.0.7
    60eb0000-60eb7000: C:\oracle\product\11.1.0\client_1\bin\orauts.dll, 11.1.0.7
    636b0000-636b6000: C:\oracle\product\11.1.0\client_1\bin\oravsn11.dll, 11.1.0.7
    60fa0000-61158000: C:\oracle\product\11.1.0\client_1\bin\oracommon11.dll, 11.1.0.7
    63430000-6345d000: C:\oracle\product\11.1.0\client_1\bin\orasnls11.dll, 11.1.0.7
    0b3b0000-0be77000: C:\oracle\product\11.1.0\client_1\bin\orageneric11.dll, 11.1.0.7
    0be80000-0c0dc000: C:\oracle\product\11.1.0\client_1\bin\oraxml11.dll, 11.1.0.7
    60020000-60030000: C:\WINDOWS\system32\MSVCIRT.dll, 7.0.3790.0
    0c0e0000-0c4b2000: C:\oracle\product\11.1.0\client_1\bin\oran11.dll, 11.1.0.6
    62740000-627a3000: C:\oracle\product\11.1.0\client_1\bin\oranl11.dll, 11.1.0.6
    62980000-629b1000: C:\oracle\product\11.1.0\client_1\bin\orantcp11.dll, 11.1.0.6
    0c4c0000-0c507000: C:\oracle\product\11.1.0\client_1\bin\oranldap11.dll, 11.1.0.6
    627f0000-62905000: C:\oracle\product\11.1.0\client_1\bin\orannzsbb11.dll, 11.1.0.6
    62530000-6266d000: C:\oracle\product\11.1.0\client_1\bin\oraldapclnt11.dll, 11.1.0.7
    62670000-6268b000: C:\oracle\product\11.1.0\client_1\bin\orancrypt11.dll, 11.1.0.6
    0c510000-0c643000: C:\oracle\product\11.1.0\client_1\bin\orazt11.dll, 11.1.0.6
    76cf0000-76d0a000: C:\WINDOWS\system32\iphlpapi.dll, 5.2.3790.3959
    62920000-6296d000: C:\oracle\product\11.1.0\client_1\bin\oranro11.dll, 11.1.0.6
    626b0000-626b9000: C:\oracle\product\11.1.0\client_1\bin\oranhost11.dll, 11.1.0.6
    0c650000-0c656000: C:\oracle\product\11.1.0\client_1\bin\orancds11.dll, 11.1.0.6
    629c0000-629cd000: C:\oracle\product\11.1.0\client_1\bin\orantns11.dll, 11.1.0.6
    0c660000-0c6e0000: C:\oracle\product\11.1.0\client_1\bin\oraztkg11.dll, 11.1.0.6
    0c6e0000-0caba000: C:\oracle\product\11.1.0\client_1\bin\orapls11.dll, 11.1.0.7
    63420000-63429000: C:\oracle\product\11.1.0\client_1\bin\oraslax11.dll, 11.1.0.6
    63080000-63296000: C:\oracle\product\11.1.0\client_1\bin\oraplp11.dll, 11.1.0.7
    0cac0000-0cb6d000: C:\oracle\product\11.1.0\client_1\bin\orahasgen11.dll, 11.1.0.6
    62ab0000-62b2f000: C:\oracle\product\11.1.0\client_1\bin\oraocr11.dll, 11.1.0.6
    0cb70000-0cbce000: C:\oracle\product\11.1.0\client_1\bin\oraocrb11.dll, 11.1.0.6
    6d580000-6d628000: C:\WINDOWS\system32\dbghelp.dll, 5.2.3790.3959
    63520000-635c2000: C:\oracle\product\11.1.0\client_1\bin\orasql11.dll, 11.1.0.7
    63060000-63074000: C:\oracle\product\11.1.0\client_1\bin\OraPlc11.Dll, 11.1.0.7
    0cde0000-0cde6000: C:\siebel\siebsrvr\BIN\sslcdbgengw.dll, 811.11.822.4
    0ce30000-0ce4c000: C:\siebel\siebsrvr\BIN\sscfomlg.dll, 811.11.822.4
    0ce60000-0cffb000: C:\siebel\siebsrvr\BIN\sscfcli.dll, 811.11.822.4
    0d070000-0d11d000: C:\siebel\siebsrvr\BIN\sscacmbc.dll, 811.11.822.4
    209c0000-20a7e000: C:\siebel\siebsrvr\BIN\SSCABCBC.DLL, 811.11.822.4
    20cc0000-20d19000: C:\siebel\siebsrvr\BIN\SSCACCBC.DLL, 811.11.822.4
    212d0000-212ec000: C:\siebel\siebsrvr\BIN\sscapsppricersvc.dll, 811.11.822.4
    20060000-2059a000: C:\siebel\siebsrvr\BIN\sscaswbc.dll, 811.11.822.4
    21690000-21704000: C:\siebel\siebsrvr\BIN\SSCMSVC.DLL, 811.11.822.4
    215a0000-2166c000: C:\siebel\siebsrvr\BIN\SSCMCLNT.DLL, 811.11.822.4
    21740000-2179e000: C:\siebel\siebsrvr\BIN\sscmcfgsvc.dll, 811.11.822.4
    0d010000-0d025000: C:\siebel\siebsrvr\BIN\SSCASRMS.DLL, 811.11.822.4
    0d030000-0d070000: C:\siebel\siebsrvr\BIN\sscaadbc.dll, 811.11.822.4
    21590000-2159d000: C:\siebel\siebsrvr\BIN\SSCFHIMS.DLL, 811.11.822.4
    22490000-224aa000: C:\siebel\siebsrvr\BIN\SSCASSMC.DLL, 811.11.822.4
    222d0000-22371000: C:\siebel\siebsrvr\BIN\sscacabc.dll, 811.11.822.4
    224b0000-224ec000: C:\siebel\siebsrvr\BIN\SSCASVBC.DLL, 811.11.822.4
    22be0000-22c24000: C:\siebel\siebsrvr\BIN\swcahcfr.dll, 811.11.822.4
    22aa0000-22b54000: C:\siebel\siebsrvr\BIN\SWCACAFR.DLL, 811.11.822.4
    22c30000-22ca0000: C:\siebel\siebsrvr\BIN\SSCAXMLPWFR.DLL, 811.11.822.4
    22ed0000-22f8c000: C:\siebel\siebsrvr\BIN\SSDTBC.DLL, 811.11.822.4
    22a80000-22a9f000: C:\siebel\siebsrvr\BIN\SSCACTBC.DLL, 811.11.822.4
    23040000-230c1000: C:\siebel\siebsrvr\BIN\SWCASIFR.DLL, 811.11.822.4
    211b0000-211cd000: C:\siebel\siebsrvr\BIN\swcacmfr.dll, 811.11.822.4
    21f60000-21f6d000: C:\siebel\siebsrvr\BIN\SSLCKM.DLL, 811.11.822.4
    22060000-220ca000: C:\siebel\siebsrvr\BIN\SSCANSHSV.DLL, 811.11.822.4
    21b20000-21b9d000: C:\siebel\siebsrvr\BIN\SWCANSHFR.DLL, 811.11.822.4
    21af0000-21b1a000: C:\siebel\siebsrvr\BIN\SSCANSHBC.DLL, 811.11.822.4
    21f80000-21fc9000: C:\siebel\siebsrvr\BIN\sWcasvfr.dll, 811.11.822.4
    22170000-22202000: C:\siebel\siebsrvr\BIN\SSFAFCBC.DLL, 811.11.822.4
    23580000-235c4000: C:\siebel\siebsrvr\BIN\SSCAPRMSV.DLL, 811.11.822.4
    22020000-2203e000: C:\siebel\siebsrvr\BIN\SSCAEITE.DLL, 811.11.822.4
    1ff20000-2005a000: C:\siebel\siebsrvr\BIN\sscafwsv.dll, 811.11.822.4
    22d40000-22ea8000: C:\siebel\siebsrvr\BIN\sscaeiwm.dll, 811.11.822.4
    22d10000-22d3e000: C:\siebel\siebsrvr\BIN\SSCAEIWO.DLL, 811.11.822.4
    23780000-2378b000: C:\siebel\siebsrvr\BIN\SSCAEILM.DLL, 811.11.822.4
    23790000-237e3000: C:\siebel\siebsrvr\BIN\SSCAEISA.DLL, 811.11.822.4
    22560000-22652000: C:\siebel\siebsrvr\BIN\SSCASPBC.DLL, 811.11.822.4
    23880000-23897000: C:\siebel\siebsrvr\BIN\sscafssvactcache.dll, 811.11.822.4
    239a0000-23a89000: C:\siebel\siebsrvr\BIN\SSCOMMSV.DLL, 811.11.822.4
    036c0000-0372a000: C:\siebel\siebsrvr\BIN\SSCHATBS.DLL, 811.11.822.4
    22770000-227c1000: C:\siebel\siebsrvr\BIN\sscasabc.dll, 811.11.822.4
    23b30000-23b4c000: C:\siebel\siebsrvr\BIN\SSFACMBC.DLL, 811.11.822.4
    23b50000-23b64000: C:\siebel\siebsrvr\BIN\SSFACMSV.DLL, 811.11.822.4
    23ea0000-23eef000: C:\siebel\siebsrvr\BIN\sscacmuinsv.dll, 811.11.822.4
    23490000-234f6000: C:\siebel\siebsrvr\BIN\SWCAFSFR.DLL, 811.11.822.4
    21a80000-21aa5000: C:\siebel\siebsrvr\BIN\SSCASHSV.DLL, 811.11.822.4
    21eb0000-21edd000: C:\siebel\siebsrvr\BIN\SSCASHBC.DLL, 811.11.822.4
    21ee0000-21f2f000: C:\siebel\siebsrvr\BIN\SWCASHFR.DLL, 811.11.822.4
    211d0000-211ee000: C:\siebel\siebsrvr\BIN\sscaxmbc.dll, 811.11.822.4
    23ef0000-23f41000: C:\siebel\siebsrvr\BIN\SWCACGFR.DLL, 811.11.822.4
    22140000-22170000: C:\siebel\siebsrvr\BIN\SSCATASV.DLL, 811.11.822.4
    21220000-212c8000: C:\siebel\siebsrvr\BIN\swcabcfr.dll, 811.11.822.4
    23bd0000-23bf4000: C:\siebel\siebsrvr\BIN\sscasasv.dll, 811.11.822.4
    23b90000-23ba6000: C:\siebel\siebsrvr\BIN\SSCAEIXQ.DLL, 811.11.822.4
    24860000-24929000: C:\siebel\siebsrvr\BIN\swcaspsv.dll, 811.11.822.4
    04080000-0408b000: C:\siebel\siebsrvr\BIN\SSCFUREC.DLL, 811.11.822.4
    Heap status          : ok
    Total physical memory: 50320576 KB
    Free physical memory : 35138076 KB
    Paging file size     : 51918740 KB
    Available paging size: 36997428 KB
    Virtual memory info:
    Total              : 2097024 KB
    Available          : 836420 KB
    Available extendent: 0 KB
    Assert failure count : 1595991
    Command line         : siebmtshmw.exe C:\siebel\siebsrvr\admin\siebprodent.pxsblaom026.shm 33 0 1 5 0 ENU 0 0
    Current directory    : C:\siebel\siebsrvr\BIN
    Executable           : C:\siebel\siebsrvr\BIN\siebmtshmw.exe
    Current time         : 01/19/2015 10:52:32:099
    CCF Version          : 8.1.1.10 SIA [23017] LANG_INDEPENDENT
    CCF Compiled On      : Jan 21 2013 18:06:00
    Would approciate if anyone could provide some inputs on the same..
    Thanks
    Ruban

  • Latest GPS driver on T400 crashes consistently on startup

    Hey folks...
    System Update brought over the latest GPS driver for my T400, but now whenever I start up ThinkVantage GPS, it crashes, with:
    "GPSE GPSESvr Module has encountered a problem and needs to close"
    and then
    "GPS Enabler has encountered a problem and needs to close"
    Anyone else having this problem?
    This is on Windows XP Pro x32.
    The Application log shows:
    .NET Runtime version 2.0.50727.3620 - Fatal Execution Engine Error (7A097772) (80131506)
    EventType clr20r3, P1 tvgpsapp.exe, P2 2.7.0.1, P3 4dae6c05, P4 tvgpsapp, P5 2.7.0.1, P6 4dae6c05, P7 fe, P8 37, P9 pszqoadhx1u5zahbhohghldgiy4qixhx, P10 NIL.
    - Tim

    Serge1410 wrote:
    hey tbessie,
    i believe you should install the latest .Net Runtime
    http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=9cfb2d51-5ff4-4491-b0e5-b...
    From what I can see, there's a version 4 and the current version on your system is version 2
    Hey Serge...
    Thanks for the suggestion - actually, I've got all versions of .NET except version 1.1 installed on my system, and that was on purpose; Quicken 2010 keeps crashing in .NET, so I removed .NET completely and installed everything from scratch (except Version 1.1, which is separate from the other .NET runtimes and not necessary for most applications these days - I suppose I could try to install that as well just to see if it makes any difference).
    Currently I have installed .NET versions:
    2.0 SP2
    3.0 SP2
    3.5 SP1
    4 Client Profile
    4 Extended
    ... so .NET-framework-using apps shouldn't be having any issues.  I've not heard of any conflicts having those installed may have, unless the GPS app is trying to use the wrong version of the framework even though the one it SHOULD use is already installed.
    - Tim

  • Apps 10g singale node to 10g RAC upgrade

    Hi Friends,
    I am planing to upgrade my Apps 10g singale node to 10g RAC. If you have any good document for this please share with me.

    Pl identify exact OS, database and EBS versions. Pl see these MOS Docs
    Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
    Step by Step Guide to configure Oracle Applications Release 11i with 10g R2 RAC and ASM [ID 731278.1]     
    Configuring Oracle Applications Release 11i with 10g RAC and 10g ASM [ID 312731.1]     
    HTH
    Srini

  • Oracle 10g RAC on Solaris Node Eviction

    Been having periodic node eviction on my server. I've found several threads regarding RAC node reboots but nothing specific.. In my case, the node eviction warning appears to be "immediate"
    [cssd(9530)]CRS-1612:node mbdmb2 (0) at 50% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1612:node mbdmb2 (0) at 50% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1611:node mbdmb2 (0) at 75% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1611:node mbdmb2 (0) at 75% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1610:node mbdmb2 (0) at 90% heartbeat fatal, eviction in 0.000 seconds
    [cssd(9530)]CRS-1607:CSSD evicting node mbdmb2. Details in /u01/crs/oracle/product/10.2/app/log/mbdmb1/cssd/
    ocssd.log.
    Other people’s: Seem to have a time to recover.. and only reboots when it eventually runs out of time..
    2009-08-31 16:05:41.405
    [cssd(4968)]CRS-1612:node simsd1 (1) at 50% heartbeat fatal, eviction in 29.611 seconds
    2009-08-31 16:05:42.403
    [cssd(4968)]CRS-1612:node simsd1 (1) at 50% heartbeat fatal, eviction in 28.613 seconds
    2009-08-31 16:05:56.412
    [cssd(4968)]CRS-1611:node simsd1 (1) at 75% heartbeat fatal, eviction in 14.604 seconds
    2009-08-31 16:05:57.411
    [cssd(4968)]CRS-1611:node simsd1 (1) at 75% heartbeat fatal, eviction in 13.605 seconds
    2009-08-31 16:06:05.413
    [cssd(4968)]CRS-1610:node simsd1 (1) at 90% heartbeat fatal, eviction in 5.603 seconds
    2009-08-31 16:06:06.412
    [cssd(4968)]CRS-1610:node simsd1 (1) at 90% heartbeat fatal, eviction in 4.604 seconds
    2009-08-31 16:06:07.410
    [cssd(4968)]CRS-1610:node simsd1 (1) at 90% heartbeat fatal, eviction in 3.606 seconds
    2009-08-31 16:06:08.409
    [cssd(4968)]CRS-1610:node simsd1 (1) at 90% heartbeat fatal, eviction in 2.607 seconds
    2009-08-31 16:06:09.407
    [cssd(4968)]CRS-1610:node simsd1 (1) at 90% heartbeat fatal, eviction in 1.609 seconds
    2009-08-31 16:06:10.405
    [cssd(4968)]CRS-1610:node simsd1 (1) at 90% heartbeat fatal, eviction in 0.611 seconds
    2009-08-31 16:06:11.061
    [cssd(4968)]CRS-1609:CSSD detected a network split. Details in C:\product\11.1.0\crs\log\simsd2\cssd\ocssd.log.
    2009-08-31 16:14:37.873
    I'm lead to think this is due to something with the setting on the heartbeat loss window. There are some threads suggesting the hangcheck-timer but it does not appear to be for solaris. Wondering where if any place I can check/change this setting.

    Ah, thanks, looks like even just looking at the log yielded some thing different. I was grepping the alertlog instead which apparantly doesn't show as much (and shows time as 0). In the ocssd.log, it shows it with the time to live.
    One more question, can you tell from this that whether this is a network hb or disk hb related or something else?
    Thanks!
    CSSD]2010-02-24 06:46:17.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:17.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:22.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:22.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:27.685 [14] >TRACE: clssgmRegisterClient: proc(17/1009503f0), client(344/10097f
    7f0)
    [    CSSD]2010-02-24 06:46:27.685 [14] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 344 (
    10097f7f0)
    [    CSSD]2010-02-24 06:46:27.685 [14] >TRACE: clssgmJoinGrock: grock DG_FLASH51 new client 10097f7f0 with
    con 100932430, requested num -1
    [    CSSD]2010-02-24 06:46:27.685 [14] >TRACE: clssgmAddGrockMember: adding member to grock DG_FLASH51
    [    CSSD]2010-02-24 06:46:27.685 [14] >TRACE: clssgmAddMember: member (2/100921830) added. pbsz(123) prsz
    (42) flags 0x0 to grock (100914210/DG_FLASH51)
    [    CSSD]2010-02-24 06:46:27.686 [14] >TRACE: clssgmQueueGrockEvent: groupName(DG_FLASH51) count(3) maste
    r(0) event(1), incarn 208505, mbrc 3, to member 0, events 0x0, state 0x0
    [    CSSD]2010-02-24 06:46:27.686 [14] >TRACE: clssgmCommonAddMember: Local member(2) node(1) flags 0x0 0x
    100 grock (2/100914210/DG_FLASH51)
    [    CSSD]2010-02-24 06:46:27.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:27.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:28.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 50 2.123767e-314art
    beat fatal, eviction in 59.577 seconds
    [    CSSD]2010-02-24 06:46:28.941 [18] >TRACE: clssnmPollingThread: node mbdmb2 (2) is impending reconfig,
    flag 1, misstime 60423
    [    CSSD]2010-02-24 06:46:28.941 [18] >TRACE: clssnmPollingThread: diskTimeout set to (117000)ms impendin
    g reconfig status(1)
    [    CSSD]2010-02-24 06:46:29.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 50 2.123767e-314art
    beat fatal, eviction in 58.577 seconds
    [    CSSD]2010-02-24 06:46:30.363 [17] >TRACE: clssgmDispatchCMXMSG(): msg type(12) src(2) dest(1) size(36
    0) tag(00d2002a) incarnation(88)
    [    CSSD]2010-02-24 06:46:32.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:32.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:37.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:37.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:42.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:42.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:47.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:47.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:52.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:57.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:46:57.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:46:58.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 75 2.123767e-314art
    beat fatal, eviction in 29.577 seconds
    [    CSSD]2010-02-24 06:46:59.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 75 2.123767e-314art
    beat fatal, eviction in 28.577 seconds
    [    CSSD]2010-02-24 06:47:02.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:47:02.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:47:07.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:47:07.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:47:12.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:47:12.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:47:16.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 11.577 seconds
    [    CSSD]2010-02-24 06:47:17.725 [17] >TRACE: clssgmDispatchCMXMSG(): msg type(12) src(2) dest(1) size(36
    0) tag(00d3002a) incarnation(88)
    [    CSSD]2010-02-24 06:47:17.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:47:17.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 10.577 seconds
    [    CSSD]2010-02-24 06:47:17.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:47:18.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 9.577 seconds
    [    CSSD]2010-02-24 06:47:19.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 8.577 seconds
    [    CSSD]2010-02-24 06:47:20.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 7.577 seconds
    [    CSSD]2010-02-24 06:47:21.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 6.577 seconds
    [    CSSD]2010-02-24 06:47:22.941 [19] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-02-24 06:47:22.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 5.577 seconds
    [    CSSD]2010-02-24 06:47:22.941 [19] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-02-24 06:47:26.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 1.577 seconds
    [    CSSD]2010-02-24 06:47:26.941 [19] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-02-24 06:47:27.703 [17] >TRACE: clssgmPeerEventHndlr: receive failed, node 2 (mbdmb2) (1009
    0eb90), rc 11
    [    CSSD]2010-02-24 06:47:27.704 [17] >TRACE: clssgmPeerDeactivate: node 2 (mbdmb2), death 0, state 0x800
    00001 connstate 0xf
    [    CSSD]2010-02-24 06:47:27.704 [17] >TRACE: clssgmPeerListener: discarded 0 future msgsfor 2
    [    CSSD]2010-02-24 06:47:27.941 [18] >WARNING: clssnmPollingThread: node mbdmb2 (2) at 90 2.123767e-314art
    beat fatal, eviction in 0.577 seconds
    [    CSSD]2010-02-24 06:47:28.521 [18] >TRACE: clssnmPollingThread: Eviction started for node mbdmb2 (2),
    flags 0x0001, state 3, wt4c 0

  • Configring and instaling 10g RAC on two Nods win 2003 Local Area

    All Experts
    I want to configure and instal 10g RAC using three database server on difirent network groups (Head office , processing, stitching). i am unable to configure ip etc. ip address is as:
    work group ip address computer name
    HO 192.168.0.29 maindb
    processing 192.168.1.92 procdb
    stitching 192.168.1.92 stichdb
    Please guide how i can configure and user hosts file in windows\system32\drivers\etc\hosts
    Thanks in advance

    Thanks
    i have three server with same subnet mask. save os and db versiong windows server 2003 and 10g on all servers.
    server-1
    ip address : 192.168.0.29
    ubnet mask : 255.255.254.0
    computer name : maindb
    server-2
    ip address : 192.168.0.92
    ubnet mask : 255.255.254.0
    computer name : procdb
    server-3
    ip address : 192.168.0.93
    ubnet mask : 255.255.254.0
    computer name : stitchdb
    Please guide me how i can configure system32\dirvers\etc\hosts file.
    Thanks in advance.

Maybe you are looking for

  • How to set up rules/conditions on a drop down box to ensure its been filled if a value in a text box is selected.

    Hi, I am in midst of creating a form in infopath. I have a text box field in which the user will enter the number of issues he has. if the user has entered the number of issues he has, then he will need to select the type of issues from a multi selec

  • How to relate indicator in main vi

    Sorry i have posted this question previously  in the wrong board Hi In my program i using a menu ring control and indicators.i cretaed a subvVI for this  and when i tried to execute in my mainVI the indicators are not working Thanks

  • Problem while using Utl_mail Package.

    When i am trying to write file in local oracle server it works fine. But when i tried to write file in mapped or network drive system gives me a error message. I also want to write file in Client drive. How it would be possible. I got something for M

  • Re: Forte & Lotus Notes

    Has anyone developed an interface between Forte and email systems, specifically Lotus Notes? We want to, among other things, send email messages to named users from within a Forte application. We are running AIX on our Forte servers. Our client machi

  • Can't open downloaded app due "unknown publisher"

    I can't open a downloaded app because of an "unknow publisher"