Launch an editor from eclipse
Hello everybody(sorry for my english).
I would know how can I launch a text editor of Eclipse to work with files.
I wonna launch the text editor of eclipse when I click into a file showed in a jtree.
Does anyone know how can I do it, or a similar idea? My problem is that I don�t Know what functions must be called to launch it.
Thanks a lot
King Regards
IEditorInput inputEditor = new FileEditorInput(javaFile);
String id =
MyPlugin.getDefault().getWorkbench().getEditorRegistry().getDefaultEditor(javaFileName).getId();
IWorkbenchPage activePage =
PlatformUI.getWorkbench().getActiveWorkbenchWindow().getActivePage();
activePage.openEditor(inputEditor,id);
Similar Messages
-
Launching Camera Editor From Photoshop
It's unbelievable how much time & effort I have put in to getting an answer to such a simple question. Back in much earlier releases, it would have taken about 15 seconds with a quick search in the help file.
I saw one video in which a Photoshop geek quickly launces his raw editor by clicking on a small, illegible icon in the lower right-hand of his Layer Icon in his Layers Dialogue but of course he doesn't explain how that works, and there is no such corresponding little sub-icon in MY Layers icon, and the word Raw doesn't even seem to show up anywhere in any menu. I know this has to be possible. I can open a raw file (.nef, in this case) the obvious way, but after switching it over to Photoshop I can't switch it back to the raw editor (?)That small icon means it is a Smart Object (SO)
When you open your .NEF in ACR (Adobe Camera Raw) the button on the lower right will usually say "Open Image".
Hold down your SHIFT key and the button changes to "Open Object"
Your photo will open in Photoshop and will have this SO icon on the layer, If you double click the icon it will reopen the photo in ACR where you can make additional adjustments
Then click OK to go back to Photoshop.
This procedure will only work if you tell ACR to open your photo using "Open Object".
While you can make a layer into a SO in Photoshop this will only open the image in another PS doc.
Only a SO from ACR will be able to round trip between PS and ACR. -
Links to launch Script Editor no longer work
Links to launch Script Editor no longer work.
I don't know, I just use a very simple Applescript to enclose the clipboard in tags that allow the user to launch Script Editor from the browser:
set the clipboard to "<a href=applescript://com.apple.scripteditor?action=new>Click here to launch Script Editor</a>.
<pre class=COMMAND>" & return & (the clipboard) & return & "</pre>"
And it wraps the script on the clipboard on PRE tags so the structure is preserved. Neither of those work now. -
Launching WinWord as editor from Form 11g text field.
In Forms 6i FORMS60_EDITOR registry entry allowed users to launch MS Word from the application. This enabled them to have an editor with spell checks and other advance editing features. Upon exit from MS Word, the content of the file was saved in the column for the connected database.
I am trying to find equivalent of that in Forms11g. Using webutil libraries calls to client_host or webutil_host successfully launches Notepad it but does not work with WinWord or Wordpad - it gives a non-oracle error 100501. I have tried using CLIENT_OLE2 but that is ending up with error WUO-705.
Any insight to setup this feature in Froms11g setup will be helpful. Thanks.Thanks for the input but I was able to accomplish what I needed by modifying one of Oracle's demo form. Below is the code, when this procedure is called from a text field, in my case by double clicking, I am lanuching MS Word and the data is from the column is displayed in a word doc thus providing users spell check funcationality. I can modify data in Word doc and when I exit, data from word doc is saved in the varchar2 column in the database.
PROCEDURE prc_Edit IS
lFileName VARCHAR2(200);
lFile client_Text_IO.File_Type;
lLine varchar2(2000);
lFirstEntry Boolean := TRUE;
BEGIN
lFileName := webutil_clientinfo.get_system_property('java.io.tmpdir') || WEBUTIL_FILE.GET_FILE_SEPARATOR || 'FormEditor.doc';
lFile := client_Text_IO.Fopen(lFileName, 'w');
client_text_io.put_line(lFile, replace(name_in(:SYSTEM.CURRENT_ITEM), chr(10), chr(13)||chr(10)));
client_text_io.fclose (lFile);
synchronize;
begin
client_host('winword.exe "' || lFileName || '"');
synchronize;
exception
when others then
message(SQLERRM);
pause;
end;
copy(null, :SYSTEM.CURRENT_ITEM);
begin
lFile := client_Text_IO.Fopen(lFileName, 'r');
loop
client_text_io.get_line(lFile, lLine);
if lFirstEntry then
lFirstEntry := false;
copy (name_in(:SYSTEM.CURRENT_ITEM) || lLine, :SYSTEM.CURRENT_ITEM);
else
if get_item_property(:SYSTEM.CURRENT_ITEM, MULTI_LINE) = 'TRUE' then
copy (name_in(:SYSTEM.CURRENT_ITEM) || chr(10) || lLine, :SYSTEM.CURRENT_ITEM);
else
copy (name_in(:SYSTEM.CURRENT_ITEM) || lLine, :SYSTEM.CURRENT_ITEM);
end if;
end if;
end loop;
end;
EXCEPTION
WHEN NO_DATA_FOUND THEN CLIENT_TEXT_IO.FCLOSE(lFile);
END; -
Unable to launch Object Wizard from Agentry Connector Studio
I am running Eclipse Juno (64-bit) with the Agentry Editor installed. When I try to launch the Object Wizard in the Agentry Connector Studio nothing happens. No error message, but the wizard doesn't appear. I am using version 6.0.46.0 of the Agentry editor.
This problem was reported in this thread but no resolution was provided. I did try opening the database development perspective as Welly suggested but it made no difference.
Unable to launch Object Wizard from Agentry connector studio..
Anyone know why this would happen, or if there is a log that might contain an entry that would tell me what went wrong?
Update: I just tried it again after rebooting Windows and now the Object Wizard is grayed out when using the Database Development Perspective. If I switch to the Agentry(Properties) perspective it is not grayed out but still nothing happens when I select it.
Full disclosure: I am running Windows in VMWare Fusion on a Mac. I am seeing some strange behavior in general with Eclipse and I've reinstalled it a number of times without resolving the problem.
Thanks,
DaveOne of the applications I have issue issues if you export the application you will not be able to load it on any other editor except from the the editor running on the Fusion VM machine and the issue was also the server failed to load the application that was published from the editor.
I am just letting you know to look see if you also run into this issue and that was the reason why then had to run on a windows machine.
Stephen. -
Cannot debug from Eclipse (Mac OS 10.7, Drive 3.01)
I piggy-backed this on another discussion three days ago, but perhaps creating a new thread will get more attention.
I recently downloaded the Adobe Drive 3 SDK and am having problems debugging the sample connectors from Eclipse. I've followed all of the instructions in the documentation, but no matter what I try I cannot get my built connectors (both basicftp and helloworld) to show up when I try to initiate a connection in Drive 3.01.
I am definitely checking (selecting) the bundles for these two samples in the run configuration, as well as all the dependant bundles ("Validate Bundles" passes successfully). In the console, if I type 'ss' I see both of the samples listed as ACTIVE. I launch Drive after I see them as active.
I tried typing 'csstat' in the console but that does not seem to be a recognized command (per the documentation).
When I launch Adobe Drive 3.01 I only see the two out-of-the-box connectors (DAM and CMIS).
If I do a proper build and export to the CS5ServiceManager directory, they do show up in Adobe Drive. However, I really need to be able to run from within Eclipse to debug.
I've followed the troubleshooting steps and killed the CS5ServiceManager and Adobe drive processes using Activity Manager (I'm on a Mac OS 10.7 Lion) and also deleted the 'data' folder, rebooted, no luck.
I even tried doing a clean installation of everything on another machine, and had the same problem.
Please help or suggest something else to try. Thanks!Thanks so much for the suggestions.
I haven't tried the 32 bit JVM yet, but your comments got me thinking about which bundles I have selected in my run configuration. When I first tried selecting ALL bundles, I got an error when launching:
The bundle could not be resolved. Reason: Missing Constraint: Import-Package: com.adobe.versioncue.serialization; version="0.0.0"
To correct that, I had gone back to the run configuration, cleared all bundles, and pressed the "Add Required Bundles" button. This only added a small subset of all bundles, but got rid of the validation error.
I now went back and selected all bundles, despite the validation error, and now I am successfully able to launch the sample.basicftp bundle from Eclipse on one of my two machines. The other one doesn't work, and when I go type 'ss' I see one of the bundles seems to get stuck in the STARTING state:
com.adobe.csi.bootstrap_2.0.0.201003221714
I can probably continue working with my one working machine, but something still doesn't seem right.
1) Should I be seeing that "Missing Constraint" error above? If not, then where do I find the bundle that it is looking for?
2) Any idea why the com.adobe.csi.bootstrap is getting stuck in the STARTING state.
Once again, thanks so much for your help! -
Error when launching Workflow Editor
Hi gurus,
I am expriencing an error when i try to launch the Workflow editor from the Workflow definition page (Actions -> Launch Workflow editor). The error is:
Unable to load resource: http://jawe.enhydra.org/twe.jnlp
I have the latest JRE installed on my windows machine, and i am running Internet Explorer 9.
Thank you in advance,
SimionHi Simion,
Make sure the together editor is installed on your laptop. Try saving the xpdl file from workflow definition to your laptop first and then launch the editor and open it. Also, check out comments from Rob in the message below.
ESourcing Workflow - SRM UWL integration?
If you still have problems, let us know.
Regards,
Vikram -
Getting an error while launching Video Editor (either New project or Existing project). However i can launch "Organizer" with no issue.
windows 7 -64bit Core i7
Premiere elements has encountered an error. [..\..\Src\Core\Preferences.cpp-338]
then
-Runtime Error! Program C:\Program Files|A... This application has requested the Runtime to terminate it in an unusual way. Please contact the applications suport team for more information.
then
-Adobe Premiere Elements 11 has stopped working A problem caused the program to stop working correctly, please close the program.School Board
Thanks for the replies.
I was almost sure the uninstall, ccleaner, reinstall would resolve the problem. But, onward....
Are you working from a school or company network or from an individual home computer?
From your ID and some comments, I think school network.
I suspect the issue is more than resetting the preferences, but let us give that a try to rule it out (or in).
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then
you delete the whole 11.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working
with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see the complete path cited.
Is the Owner designation in the above path named correctly?
Also, look at disabling the SLCache Folder if you find one as described for 12 in the following
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
To be continued....
ATR -
Problems with Whitespace using nested tables from eclipse dtp oracle plugin
Hi,
sending from eclipse to oracle xe fails if whitespace is used:
Example1: Nested table in nested table
adress_table_typ has another nested table in it
that works
CREATE TABLE x (
i INTEGER PRIMARY KEY,
adressen adress_table_typ
) NESTED TABLE adressen STORE AS adressen_nt (NESTED TABLE tels STORE AS tels_nt);
inserting a newline fails
CREATE TABLE x (
i INTEGER PRIMARY KEY,
adressen adress_table_typ
) NESTED TABLE adressen STORE AS adressen_nt
(NESTED TABLE tels STORE AS tels_nt);
Example2:
Two nested tables
CREATE TABLE x (
i INT PRIMARY KEY,
l_table_typ,
m_table_typ
) NESTED TABLE laptops STORE AS laptop_nt NESTED TABLE interessen STORE AS interessen_nt;
and then an insert
INSERT INTO x VALUES (123456,
l_typ(laptop_typ('123', 'netop'),
laptop_typ('234', 'thinkpad'),
laptop_typ('345', 'iBook')),
m_typ('a', 'b', 'c')
which fails. Note that the INSERT works when copy&pasted to sqlplus. It also works if there is
just one nested table.
Am I doing somethig wrong or is this a bug in the eclipse data tools plugin?
Regards
- Peter
PS; It is rather difficult to insert whitespace in that forum editor. Any possibility to have ascii?
For a "whitespace" question rather important...A bit of an update on the original post. I was playing around with the plug-in xml file (e.g. eclipse\plugins\org.eclipse.jst.server.generic.oc4j_1.5.100.v20070608\buildfiles\oracle.10.1.3.xml). I changed the following from "deploy" to "redeploy" and it seems to be working once the applicatoin is initial deployed. Of course, I have to change it back to "deploy" if it is the first time the application is being deployed. However; I would still would like to resolve this if there is something out there that fixes this problem. Or if everything points to an enviornment problem, I can continue to play with it.
<target name="deploy.j2ee.ear" depends="check.skip.ear.deploy" unless="skip.deploy">
<antcall target="package.module.ear"/>
<oracle:redeploy
deployerUri="${deployer.uri}"
userId="${oc4j.admin.user}"
password="${oc4j.admin.password}"
file="${server.publish.dir}/${module.name}.ear"
deploymentName="${module.name}"
bindAllWebApps="${oc4j.bind.website}"/>
</target> -
Launching Asset Editor in OER throws exception
Hi,
While Launching Asset Editor, in the middle of my work, I started facing one issue.
From OER Console (http://localhost:7101/oer), when I click on Edit/Manage Assets Link, it downloads registrartool.jnlp file.
When I double click on this file, It launches Asset Editor but this editor does not have Action Menu and also, it does not show any assets under different folders.
On Server, I get exception as
com.componentregistry.util.CMException: User is not logged in##5##1000##13449439
31209
at com.componentregistry.util.CMException.<clinit>(CMException.java:10)
at com.componentregistry.servlet.CMEEBaseServlet.service(CMEEBaseServlet
.java:37)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.wrapRun(WebAppServletContext.java:3717)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
com.componentregistry.util.CMException: User is not logged in##5##1000##13449439
31209
Looks as while launching jnlp file, security context was not carried. Did anyone face this issue? Earlier it was working fine. Just in the middle, it started giving this error.
I have deleted all temp files from my machine. I have deleted server's tmp folder which contains cache but it is of no help.
If anyone has faced this issue, Please suggest.
Thanks,
Parshant
Edited by: 833944 on 14-Aug-2012 04:55Solved the problem locally. It appears that one of the related projects copied an older version of the javafx jar file from our repository because the project had the checkbox for copying dependent libraries selected. Meanwhile the JDK is using the latest JDK. The apparent conflict was resolved by unselecting the copy dependent libraries checkbox in the properties window for that project.
-
Unable to launch Adobe editor in netweaver developer studio.
Hi,
Any one helps me to open adobe editor.
I was created up to UI element. And pdfSource as binary variable.
When I was to edit interactive form in Outline, the problem was occurred
Like, Unable to create part: interactive from.
And an error has occurred when creating this editor.
All ready I was registered WDAdobeCotroler.dll.
Please help me to launch adobe editor.
Thanks
Ramana reddyThanks Markus..
I was installed Adobe LvieCycle...
But i was forgotten register WDpdfControl.dll...
Now its working fine.
Regards
Ramana -
Associating external editor in Eclipse for OSX
How do I associate an external editor to eclipse?
With Windows and Linx I can do this with Preferences->General->Editors->File Associaion. I then click the file type (in this case *.doc), and browse to the application (either OpenOffice or MS Word) and select the app that I want. Then whenever I select a file of that type inside of eclipse, it opens the file in the associated editor.
But when do the same thing in OSX, the program never starts.
There must be some way to call OpenOffice or MS Word from inside eclipse.
Does anybody know how to do this in OSX?
Thank you for you help
MacBook Pro Mac OS X (10.4.9) eclipse 3.2.2
Mac OS X (10.4.9)This sounds like a bug. We probably don't test with a prompt
containing a carriage return. You can file this bug using
http://bugs.sun.com if you like. Look for the "Sun Studio" categories.
--chris -
CSS Editor in Eclipse hijacked/disabled
Flex sets itself as the default CSS editor in Eclipse, whihc
is fine.. except that I prefer the WST CSS editor that is installed
with the WST toolkit that you can get from Eclipse.org.
So.. going to "Preferences>General>Editors>File
Associations" I can set the default CSS editor back to the WST CSS
editor, and even delete the Flex CSS editor - but doing that just
gives me "plain text" css files (black font, no code completion,
Outline View etc).
But - if I go into "Help>Manage Configuration" and DISABLE
Flex - I get my CSS editor back!
SO - does anyone know how I can have Flex ENABELD *and* have
my referred CSS editor..?
Cheers,
Seanzydecode wrote:
> Flex sets itself as the default CSS editor in Eclipse,
whihc is fine.. except
> that I prefer the WST CSS editor that is installed with
the WST toolkit that
> you can get from Eclipse.org.
>
> So.. going to "Preferences>General>Editors>File
Associations" I can set the
> default CSS editor back to the WST CSS editor, and even
delete the Flex CSS
> editor - but doing that just gives me "plain text" css
files (black font, no
> code completion, Outline View etc).
>
> But - if I go into "Help>Manage Configuration" and
DISABLE Flex - I get my CSS
> editor back!
>
> SO - does anyone know how I can have Flex ENABELD *and*
have my referred CSS
> editor..?
I don't know if this is the problem, but Eclipse remembers
the last
editor used to open a file. So, if you have a file called
foo.css and
open it with the Flex CSS editor, that file will open with
the Flex CSS
editor the next time you open it even if you have changed the
file
association for .css files. But files that you haven't opened
before
should open with the editor specified by the fila
associations.
Here's something to try: Right-click on your CSS file and
choose the WST
editor from the "Open With" submenu. That file should then
open with the
WST editor on subsequent openings.
-- Greg Dow
-- Adobe Flex Builder Team -
How to run the open script code from eclipse?
Hi,
How to run the open script code from eclipse.
Please let me any soulutions on this.Hi Konda
I am not quite sure you can do that and it would even be not supported... Again, what is the purpose? Why do you want to run your openscript code in Eclipse?
What is the code you try to run?
As an example, even if you include al the jar files and so on. don't think the function "Launch Browser" could work because it isn't only java code orjar files.....
If you give us more background. maybe we can guide you to a better solution...
JB -
How can you start the tag config editor from a vi or when labview starts?
how can you start the tag config editor from a vi or when labview starts?
Hi,
There is a VI called "dsc_TagEditorLauncher.vi" under "C:\Program Files\National Instruments\LabVIEW 7.1\project\lvdsc" folder that can be used to launch the TCE programmatically. I hope this helps.
Best Regards,
Remzi A.
Applications Engineering
National Instruments
Maybe you are looking for
-
How to connect to HFM 11.1.1.2?
During configuration, I set user as administrator of Windows. Is it right? !http://img2.imageshack.us/img2/9128/92162515.gif! Then I login as administrator. !http://img22.imageshack.us/img22/153/53652757.gif! It always reports cannot connect to serve
-
Hi there, I am currently learning C5 Dreamweaver and now I see in the course that need photoshop. What would be the cheapest way to get photoshop so I can finish the course ? Do I really need to get a (student) membership for CC or are there also so
-
Columns should be left justified
Hi all, I used a t:dataTable to display my search results, My req says all the columns should be left justified, how can I do that? Can some one help me in this?
-
Hi, I noticed since few days that the grey screen asking e to reboot appeared few times. I didn't install any new software or RAM neither. I have the following report : Thu Aug 28 14:15:24 2008 panic(cpu 0 caller 0x00223363): "rtunref: bad refcnt 0 f
-
The color of a pixel in Graphics
Hi... does anyone know how to get the Color of a specific pixel in a Graphics object?? For example: public void paint(Graphics g) { // Something like this would be great! (but it doesn't exist) Color c = g.getColor(10,10); /* etc... */ }Does anyo