Layer disappear

I am facing some problem while using wizard and layers. There are 2 layers and each has a graph and a table in it. What I want to do is that when the user presses a button in one layer, the contents of that layer should disappear and the contents of new layer appear. Currently, when I press the button, the contents of the new layer appear but the contents of the old layer do not disppear. Can anyone please guide me on how to do this?

Hi,
Link the two layers and name the event with a name.
And in the properties of the pushbutton under "Action" tab select customer action and specify the name of that event.

Similar Messages

Adobe Premiere Pro Video editing layer disappeared

I was working with Adobe Premiere Pro and then the video editing layer disappeared, it left me with Audio editing layer tho.

Try dragging down this line:

HDR Pro Merge dialog box does not appear. The layer disappear. What are the solutions?

HDR Pro Merge dialog box does not appear.
The layer disappear. What are the solutions?

Hi Noel,
Actually, I just checked my scratch disk available space and it says ot is over 1.7 TB!! I am only using the C drive as my scratch drive, as that is my only drive. Anyway, I appreciate your help! Still will not function properly. Maybe I should try reinstalling Photoshop.
Cheers,
Russ

Layer.translate() making layer disappear

Hi,
Experienced a strange problem trying to move layers with layer.translate(). I had a pretty peculiar case of a bunch of 1px tall and 400px wide dividers as simple artLayers stacked on top of each other. Then I tried to move them vertically to even spacing, i.e. move first one 10px, second 20px, etc. However what happened is that seemingly randomly some layers disappeared after the translate()-operation. When layer disappeared, layer.bounds was correctly [0, 0, 400, 1] before operation, and [0, 0, 0, 0] after operation ie. the pixels really seemed to disappear. I also tried making sure there is no selection and setting the layer as selected before moving, but same results.
What helped was making the height bigger, e.g. adding an almost invisible dropshadow. It's like Photoshop CS6 would make a rounding error in bounds calculation and decide it became empty. Anyone with similar experience, workarounds?
Matias

You are aware that the lines will all end up atop one another with those settings?
The AM code seems to provide a different result from the DOM code in that the Layers have proper bounds.
#target photoshop
var HEIGHT = 5
app.preferences.rulerUnits = Units.PIXELS
var doc = app.activeDocument
for (var i=0; i < doc.artLayers.length; i++) {
    var layer = doc.artLayers[i]
    doc.activeLayer = layer
    doc.resizeCanvas (doc.width, doc.height + HEIGHT, AnchorPosition.BOTTOMCENTER)
//    layer.translate(0, -HEIGHT);
    moveLayer (0, -HEIGHT);
function moveLayer (theX, theY) {
// =======================================================
var idmove = charIDToTypeID( "move" );
    var desc3 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref2 = new ActionReference();
        var idLyr = charIDToTypeID( "Lyr " );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idTrgt = charIDToTypeID( "Trgt" );
        ref2.putEnumerated( idLyr, idOrdn, idTrgt );
    desc3.putReference( idnull, ref2 );
    var idT = charIDToTypeID( "T   " );
        var desc4 = new ActionDescriptor();
        var idHrzn = charIDToTypeID( "Hrzn" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc4.putUnitDouble( idHrzn, idPxl, theX );
        var idVrtc = charIDToTypeID( "Vrtc" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc4.putUnitDouble( idVrtc, idPxl, theY );
    var idOfst = charIDToTypeID( "Ofst" );
    desc3.putObject( idT, idOfst, desc4 );
executeAction( idmove, desc3, DialogModes.NO );

Layer disappear when using blur gallery

The same thing happens on all three blur gallery effects (field blur, iris blur, tilt shift). Once I pick the filter the layer becomes empty. The strange thing is that when I manipulate any of the controls the object appears, but once I stop holding the mousebutton down on the input. The object disappears again. When i apply the settings (enter or the ok buttoon). The layer is empty. WTF?!?
I have used these filters a lot, this just happend suddenly. And I can't fix it. Restart does not help.
Adobe Photoshop CS6 running on MacBook Pro 2.3 GHz i7, osx 10.8.3.

You are probably right about the video card, because a full restart of the computer solved the problem.
Ola
On Tue, Jun 4, 2013 at 12:11 AM, Chris Cox <[email protected]

Move Tool makes the layer disappear

I'm having so many problems with CS5 bugs...so here's another one.
If I try to move a layer, sometimes it will completely disappear. This is usually right after I have pasted something but it can also happen with type.
If the layer is Type, I can select the type and find that it's moved off into Siberia (off the page) and I can then bring it back.
If it's bitmap, I can't find the thing again and have to delete the layer and repaste.
Any clue what's up or how to fix it?

In Photoshop, Edit - Preferences - Peformance, look for the [ ] Enable OpenGL Drawing setting. Disable and restart Photoshop to test.
I haven't used a touchscreen, but I can imagine the driver that's intended to interpret touches to move things around could interfere with normal mouse operations.
Also, one other thing that's very basic but worth checking: If your mouse is wireless check the batteries. Also try a different mouse. Physical mouse problems could possibly be a factor.
Just a comment about what you mentioned in the original post: Photoshop doesn't really seem buggy when the system its being run on is solid. It's a very demanding application, and it can seem as though it's faulty when some of the complex things it relies upon - such as the OpenGL implementation on your GPU - are actually at the root cause.
-Noel

3D layer disappears in After Effects CS6

When I turn a layer into a 3D layer it disappears. If i turn draft 3D on it will reappear, or if I preComp it will reappear. continuous rasterize is not on so its not that. Active camera is set in preview window, so its not front view thing.
this is driving me nuts ... any help is welcome.

1. Make sure you are looking at the Active Camera.
2. If that doesn't fix the problem tell us more about your comp and post a screenshot with all layers showing and the u key pressed twice to show us anything you have changed in the layer properties.

Layer disappeared from timeline

I'm creating some banners with Edge Animate for the first time.
I started with the biggest one, now I need to create some more downscaled versions.
Clearly the easiest and fastes way is to duplicate the edge project and modify the layers size position etc...
Duplicating the project folder and changing the file name didn't work for me (gave error "edge can't read the html file"), so I managed to do it with "save as" and changing the "project1.an" name to a new one in a clean folder. When opened, Edge creates all the assets referencing the new name.
Everything ok until here, but then I noticed that the top layer "link" (it was a hidden clickable div with the banner link) has disappeared from timeline, but it's still present in the "elements" tab.
The link was still working, then after a couple of cmd+return it disappeared also from the stage.
I created a new rectangular div with the tool, but the new one is also not present in the timeline but only in the "elements" tab.
Now I'm worried that this could cause problems on publishing or future edits. Am I doing something wrong?
Thanks for your help.

Never mind, after this post I already found the answer.
I had checked without noticing the button at the bottom of timeline "Only Show Animated Elements".
Unchecking all the layers were there.
Hope this can help if anyone has accidentally the same problem!

Form layer disappears when I zoom in (mouse scroll...not actually changing anything)

Beginning a brand new comp...using solid black layer and camera...apply Trapcode Form to solid layer. It appears. When I try to blow the comp up (just scrolling in with the mouse wheel to make it bigger), it disappears. No setting other than default. Cannot see form layer unless I zoom back out. Just plain annoying, since I can only see it when I am zoomed waaaaaay out (and therefore cannot see what I am editing).

Screenshots, comp settings, settings in Form, computer specs, AE version used. We need a lot more info.
Mylenium

A layer disappears whenever I change another layer

Hello wise Photoshop helpers!
One of my layers continues to disappear whenever I change another layer in my file, no matter what I do to the other layers.
If I try to erase something on another layer the one disappears.
I also cannot locate where this illusive layer is because it never goes away when I hit the Eye to make my layers disappear or appear. It only disappears when I change something on the doc
(i.e. type, paint, order of layers, etc.)
When I save and restart, the layer is back but if I try to continue editing, it goes away again.
I need to get this done but it's very difficult without all of may layers being visible so I feel as if I'm working in the dark. :/ Please help!
Thank you!
~Kelly

Thank you so much for responding!
I have three adjustment layers that have a little chain next to them on the layers panel that i assume would mean they are linked. To what though, i am not quite sure.
When I say "disapear" I mean it disapears from view on the actual image. I cannot find where this layer is located on the layers panel. When I make all my layers not visible with the visibility being turned off, It still remains, and there are no layers visible on the layers panel but I can see it on the image itself.
Then if I edit the doc in anyway other than visibility, then the layer disapears from view on the actual image.
Also, once I save and restart Photoshop, it always comes back. I could continue working without the layer but then I will have to continue to restart photoshop to see how it looks all together with the disapearing layer. lol
Thank you so much for any help you can provide!
-Kelly

Renaming layer disappears (Bug Report)

Renaming layer in the timeline may disappear on you.
This video shows you how to work around it.
However, this is a bug that needs to be addressed.
Wayne Barron
Dark Effects Production

On further testing I think the issue may not be directly related to layer masks at all.
Basically the issue is that the Gradient tool colors don't update to the 'default foreground/background colors' in cases where it seems that they should.
One example of such a case (as illustrated in the original post) is when the Gradient tool keeps the black/white color combo used for a layer mask in a previous document after switching to the current document where a non-masked layer is targeted and the default fg/bg colors have correctly reverted to white/white.
Example:
layer mask targeted in doc1 - notice synchronised Gradient and default fg/bg colors
after switching to non-masked layer in doc2, Gradient is still black/white although default fg/bg colors have reverted appropriately to white/white
Bug or not, it's something I wanted to point out as it seems inconsistent.

Cookie cutter image in new layer disappears

I have a background graphic. To that I added a couple rectangles in separate laters, then text in more layers that went onto the rectangles. Afterward, I wanted an arrow shape. Easy enough.
Click NEW LAYER
Cookie Cutter
Select the arrow type
Drag it into the right shape
Click the green checkmark to ok.
Whamo, it disappears, both from the page and the layer palette.

Here are the tools showing up on my screen:
Move tool
Zoom
Hand
Eyedropper
Rectangular Marquee
Lasso
Magic Wand
Quick Selection
Horizontal Type
Recompose
Cookie Cutter
Straighten
Red Eye Removal
Spot Healing Brush
Clone Stamp
Eraser
Brush
Smart Brush
Paint Bucket
I don't see either a Line Tool or Custom Shape Tool in that location. It must be elsewhere, or perhaps inside one of those listed?

Layer disappears when made into a 3D postcard layer

I have worked with 3D layers in the past without trouble but am having a significant problem. I have a photo with 3 layers. I change the top layer into a 3D postcard and the image disappears but remains in the layer menu. I have attached image below. Why is this happening?

try restarting computer.

Layer disappears when playing from Flash Player

I have a dotted line animation in a layer. It shows up fine
when dropping to IE window but it disappears when playing from
inside Flash Player 7. Maybe it needs a newer version to play it
correctly but it's just a layer with a line in it. The SWF is
created with Flash CS3. Maybe Flash Player 7 comes from Studio 8
that is also on the PC.

I just found that it plays fine on Flash Player 9 which comes
with CS3. Some of the features probably are not compatible with
Player 7.

Adjustment layer disappears

I've been dealing with this really frustrating issue, and I haven't been able to find a solution for this online yet that actually works. In Photoshop CS5.1 I have an image that I added a single hue/saturation layer to, and when I merge the layers, flatten the image, or try to save it as anything but a PSD file, the adjustment layer does not show up. The image just looks like it did before. Has anyone else had this issue? I'm really not sure what I'm doing wrong.

Here is a screenshot of a section at 100%:
In the hue/saturation layer, I colorized it with:
Hue: 175
Saturation: 25
Lightness: 0
It's an illustration and not a photo, so it is a little grainy I suppose, but I've done this effect to illustrations just like it, and it has worked.
It may or may not be helpful to note that when I first opened the image, the mode was set to Indexed Color and I changed it to RGB before working on it. I don't know if this is even relevant but if that's at all part of the problem, it's worth saying.

Layer disappear

Similar Messages

Maybe you are looking for