Layering and event capturing

In
this
flash movie, I have a tween object created on RollOver and RollOut
for those tabs. The tabs are under the large rounded rectangle, and
when I move the mouse over the spot where a tab's underneath the
rectangle they still react. How can I make it so that the event
can't fire when there's something between the tab and the
mouse?

You can just put an empty onRelease handler on your large
object, and set
its useHandCursor to false so it doesn't look like a button.
That way it'll
trap the mouse...
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Similar Messages

What for a live event capture and edition ?

Hi there,
What software is best for a live event capture and edition ? (for an instant public feedback) a one with the ability to be controlled by a 2-octave midi keyboard.
Can FCP do that ? even partly ?
The idea is to be able to do the same then tv shows (live cuts and effect layers)
thanks,
Ionel

FCP is a professional non-linear editing application ... not a live event playback device.
If you need a very fast turnaround editing facility you can look at FCP coupled with something like Picture Ready from Gallery, you can download a demo to test
if you're looking at doing a 2 camera live cut/switch then you can consider a dual decklink I/O solution and On-Air 2.0

Web event capture and web analytic

hi all,
for web analytic, we can enable the web event captured thru XCM setting.
However, is it necessary to write any modification of jsp, or event class if we are using the standard functionality only?
afterall, does shop ID is captured in every event too in standard too?
Thanks,
Shanti

Check the [Web Analytics - Overview|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ea/a2d93fac0fec06e10000000a1550b0/content.htm] to see what is captured

Training Need - TN in Training and Event Management

Hi
Did any one worked on Training Need (TN) in Training and event management? I have the below question.
For France there is a legal requirement to capture some 1.6 % of the employee annual gross salary towards training cost. So where to record the training cost of the employee in Training and event management and is there any link with payroll.
Logically it sounds as it does. but where and how is it connected with payroll.
Please revert if you know the solution.
Brs
Kenu.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

Change CSS colors in PSVI (Training and Event Management) ???

Hello All,
We're implementing Training and Event Management (PSVI). In EPD, the interface has some color issues. Namely, the background and color in a column is so dark, it's very difficult to read. (<a href="http://www.durhamcountync.gov/web_mgt/SAP/PV7I_color_issue.jpg">Screen Capture of Color Issue</a>)
I've searched on CSS, PSVI, Training and Event Management... and found all kinds of things. But, nothing on how to edit these color settings.
Is it through the ITS Theme Editor, an edit of a config/ CSS file on the portal server, edit to ABAP code in R/3? sigh. I'm at a loss.
Thank you for any wisdoms you can provide.
Ian

Hi Rick,
Thank you for your help.
The problem occurs in function module RH_OBJECTKEY_BUILD. Following raise is the problem.
    loop at bor_keyfields where bor_object_type = bor_object_type.
      read table structure_key with key
                               fieldname = bor_keyfields-reffield
                               binary search.
      if sy-subrc = 0.
        bor_objectkey+bor_keyfields-offset(bor_keyfields-ddlength) =
        hr_record_key+structure_key-offset(structure_key-leng).
      else.
*     FATAL ERROR!!!! BusObjectKey do not refer Infotypekey of DDIC!!!
        raise problem_to_build_borkey.*
      endif.
    endloop.
If found SAPNote 1066444 but the recommanted SP is already imported?!
Can you help me??

What are the options for integrating the event catalog and event landing pages in our website?

We'd like to integrate the event catalog and event landing pages into our website but would prefer not to use the standard iframe embed code. Are there other solutions available, like an API or something else?
Reason for this is that when we tried it with the iframe embed code the event catalog seems to load quite slow in a webpage on our website. Plus it seems we can't change the width and height of the event catalog with the CQ5 editor, or have the event catalog embed dynamically change in size depending on the amount of events in the catalog.

Keeping everything in one scene is the better way to go. Scenes are useful for animators who do not use navigation, they just make movies that play frame after frame without stopping. But for anything that involves navigating the timeline you will have less headaches if you just avoid them and keep everything in the one main timeline.
There are primarily two approaches to implementing pages in a timeline. Either spread them out along the timeline and navigate from frame to frame to access them, or create them as movieclips (all in the same frame) and manage their visibility. The latter approach makes it easier to maintain the status of a one page if navigating to another is necessary. And you might find it useful to mix these two approaches at times.
When you have everything on one timeline, you can have a layer dedicated to actionscript that you extend the full length of the timeline, which makes shareable code, such as variables and functions, available to anything along the timeline. This avoids any need to have duplicate function definitions since you can have the same single function available to multiple pages in the site. I usually use two actions layers... one for the shared stuff which has all code in frame 1 only, and another for frame specific code such as timeline commands and other action coding that needs to happen at particular frames.

INTERFACE AND EVENTS IN ABAP OO

Can some one explain me the real time need with example for use of interfaces and events in abap objects
(asking interface and events along doesnt mean that i am relating them).
<removed_by_moderator>
Pankaj Giri
Edited by: Julius Bussche on Jul 14, 2008 1:36 PM

Events :
Technically speaking :
" Events are notifications an object receives from, or transmits to, other objects or applications. Events allow objects to perform actions whenever a specific occurrence takes place. Microsoft Windows is an event-driven operating system, events can come from other objects, applications, or user input such as mouse clicks or key presses. "
Lets say you have an ALV - An editable one ...
Lats say - Once you press some button you want some kind of validation to be done.
How to do this ?
Raise an Event - Which is handled by a method and write the validation code.
Now you might argue, that I can do it in this way : Capture the function code - and call the validate method.
Yes, in this case it can be done.. But lets say .. you change a field in the ALV and you want the validation to be done as soon as he is done with typing.
Where is the function code here ? No function code... But there is an event here - The data changed event.
So you can raise a data changed event that can be handled and will do the validation.
It is not user friendly that you ask the user to press a button (to get the function code) for validation each time he enters a data.
The events can be raised by a system, or by a program also. So in this case the data changed event is raised by a system that you can handle.
Also, Lets say on a particular action you want some code to trigger. (You can take the same example of validation code). In this case the code to trigger is in a separate class. The object of which is not available here at this moment. (This case happens very frequently).
Advantage with events : Event handlers can be in a separate class also.
e.g : In the middle of some business logic .. you encounter a error. You want to send this information to the UI (to user - in form of a pop up) and then continue with some processing.
In many cases - A direct method call to trigger the pop up is not done. Because (in ideal cases) the engine must not interact with UI directly - Because the UI could be some other application - like a windows UI but the error comes from some SAP program.
So - A event is raised from the engine that is handled in the UI and a pop up is triggered.
Here -- I would have different classes (lets say for different Operating Systems). And all these classes must register to the event ERROR raised in application.
And these different classes for different Operation systems will have different code to raise a pop-up.
Now you can imagine : If you coded a pop-up for Windows (in your application logic) .. it will not work for Mac or Linux. But of you raise a event.. that is handled separately by a different UI classes for Win, Linux or Mac they will catch this event and process accordingly.
May be I complicated this explanation .... but I couldn't think of a simpler and concrete example.
Cheers.
Varun.

Combo box, ring and event to modify them runtime

Hi,
I attached a picture of the block diagram. Using LV 8.2.1, win XP.
What I want : User should select from Main Selection, and that brings up new values for strings in the other menus (tried both combo box and menu ring items).
Teh problem : This block doesn't do that. Why? Looking with probe, I see the event captured and data are ok until the property node. They are not writed and on the front panel I see no difference.
Thanx
Attachments:
double box test.jpg ‏97 KB
Test doppio ring.vi ‏21 KB

Slyfer wrote:
I thought that the code inside the while loop but outside the event structure wasn't care.
So if I want to do something continuosly (for example continuosly comparing two integer values to have a real-time boolean led indicator on front panel), do I put the code in the middle? This is a bit confusing thinking about the "timeout event"....
Use the timeout event or put in the middle (=outside event structure but inside while loop.... at which CPU rate is executed?? too fast?) ??
Just a suggestion. The timeout event for the Event Structure [ES] is equivalent to that of providing a small delay inside the while loop.
But it is not mandatory. If you dont wire some value to the timeout terminal, but still want to something, like comparison, you can very well put that code outside the ES but inside the while loop. It ll execute.
Else you can wire a value like 50 or 100 to the timeout terminal [ this gives enough time for the execution of the various codes inside the various events configured for the ES], so that the ES times out for every 50 or 100 ms when none of the other events occurs. If you put your comparison code here, it ll be doing the comparison all the time or whenever the ES waits and crosses the specified ms after an event has happened.
I hope this gives you a clear idea about eventstructures.
See the below links for more details on Event Structures.
http://zone.ni.com/devzone/cda/tut/p/id/3331
http://zone.ni.com:80/reference/en-XX/help/371361B-01/lvconcepts/using_events_in_labview/
http://zone.ni.com/reference/en-XX/help/371361B-01/lvhowto/caveatsrecmndtnsevnts/
- Partha
LabVIEW - Wires that catch bugs!

Create an infotype for Training and Events

Hello SAP HCM Community,
Does anyone have a step-by-step procedure on how to create an infotype for Training and Events (specifically for External Persons - H)?
I also need to find out how do I edit an existing Training and Events or PD infotype, i.e. to add fields or remove them?
Kind regards
Dorianne

Hi Dilek,
Firstly before I give you the example please advise if IT1690 is a SAP standard infotype?
Example:
When creating a Business Event (E) via transaction PSV2, PV10 or PV11 I want certain rules to be in place when the user selects the following:
When selecting an option under 'Location' for example "Internal", the user will then go to "Organizer Data". Under "Organizer Data" there will be a drop down list of A, B or C. For "Internal" Location the user should only pick option B, so if they select any of the other options and attempt to save the transaction will be stopped with an error with a message, i.e. " Incorrect Organiser Data Captured for Internal".
I look forward to your response.
Kind regards
Dorianne

Best locations for FCP Projects and Events?

Back in the olden days when FCE 4 and FCP 7 ruled the roost, it was generally considered that the best setup was to have the Project files on the System HD and the Capture Scratch (Events) on another.
Is this still the ideal setup or should the Projects be kept with the Events on an external HD?
Are there any advantages associated with the various configurations?

You might like and have a listen to Larry Jordan’s introduction
“Understanding Events and Projects”...
http://www.youtube.com/watch?v=gVlSYmOs_9A
Regards
Nolan

Run-Time Menu and Event Structure~~HELP~~

Hi, brothers,
I'm new user for LabVIEW. Use the version of LabVIEW is 8.6
One problem describe as below:
Can Run-Time Menu and Event Structure exist simultaneously?
Without Event Structure, Run-Time Menu works well, but Run-Time Menu works abnormally.after adding Event Structure,
How do I modify the problem?
Thank you for your help.
Attached is the program.
Attachments:
PC_Adjustment.zip ‏44 KB

Yes they can coexist, but not how you did it.
Every iteration of the while loop you wait for an event in the event structure, and you look if the user has selected anything from the menu.
To get this working you should add an event for <this VI>\Menu Selection (User):
Ton
PS you should add a stop button, the only way you can stop the VI is hitting the 'emergency stop' button, with hardware connected (like you have) this is not the adviced routine
Message Edited by TonP on 09-26-2008 07:34 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Main_BD.png ‏5 KB

Upload for Training and Events Business Event

Hi all,
I am new to HR.
I need to update training and event with external data. Once a month I recive the data in a file. But how can I do this using ABAP?
The file consists of the following fields...
Object type| Business Event ID| Relation| Attendee ID| Attendee Type| Proficiancy Rating| Assessment Mark| Assessment Comment|
I am thinking of to create BDC....let me know what should i do.....
Thanks in Advance.....!Brahma

Hi Waz,
Thanks for your reply,
The procedure i have to follow is.....
1.A event of business occurs on xxxxx date with object type E, and with object type id - example like sobid
2.A list of employees P or H is provided to be booked against. Once booked , the business event date is firmly booked.
3.A followup action is then conducted on Business Event date. A competency rating is then captured for those who attended.
Once this information is saved, it passes the qualification for those who attended to 0024 infotype.
Then in the follow up screen(PV15 Tcode) go into an individuals record in the qualification overview and capture assessment details in the notes section of the selected qualification
Please let me know its urgent....
Thanks in advance,
brahma

Event Structure with Event source: This VI and Event: Mouse Up

I downloaded an old example from 2008 on this forum and would like to duplicate it. It uses an event structure with an event case of just Mouse Up. Under Event Specifiers: the Event Source is <This VI> and Event: Mouse Up. This works like I want in LV 2009.
In LV 2009 if I choose for Event Source <This VI> under Events Mouse Up is not an option! I tried Event Source: Pane, and then Event Mouse Up is an option, but this does not trigger the event if you drag the mouse off the pane before you lift the mouse button.
I can copy the Event Structure over to my VI and rewire every case but that does not seem to be a good solution cuz I want this in several VIs.
I have attached the original VI with the Event Specifier I want. How do I get this Event Specifier in LV 2009?
Attachments:
Slider event control.vi ‏19 KB

phillman wrote:
I downloaded an old example from 2008 on this forum and would like to duplicate it. It uses an event structure with an event case of just Mouse Up. Under Event Specifiers: the Event Source is <This VI> and Event: Mouse Up. This works like I want in LV 2009.
In LV 2009 if I choose for Event Source <This VI> under Events Mouse Up is not an option! I tried Event Source: Pane, and then Event Mouse Up is an option, but this does not trigger the event if you drag the mouse off the pane before you lift the mouse button.
So what you can do is monitor the 'Mouse Leave' event for th pane, and then start polling the mouse state.
Technically it is correct that there is no Mouse Up event detected since the Mouse Up is not happening on th epane.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Business Event Brochure in Training and Event Management?

Hi Guru's
My client has a requirement as follows. The training administrator decides the Business Event Types which for which superiors can book their subordinates or not. Those events are stored at a particular place. Once the administrator stores them, a mail should be triggered to all the superiors. Thus superior can have a list of event types for which he can book his subordinates. When he books for such events, a mail should be triggered to his subordinates regarding the training event. If an employee books for an event, a mail should be triggered to his superior for approval.
How is this possible? According to me, those events will be "Included in Brochure" (in Business Event Type Infotype). Am I right?
Please suggest me.
Points assured!
Thanks in advance.

Hello ,
see the links it might help :
Business processes of Training and Event Managment
Training and Event Management
Lots of workflow

TEM and FI/CO (Training and Event Management)

Hi All,
I wish to track actual cost per event in PE (TEM - Training and Event Management). Was considering having a Internal order per Instance of event. Have any Idea on how to set up something like this?
Appreciate all ideas,
LB

Hi Dean,
using internal orders you have to consider that sending and receiving cost center have to in the same company code.
If you do not want to distribute the costs to FI/CO but only report them, you can use the cost items provided by TEM. We have set up something similar for our plants in South Europe.
We have created some cost items and fill them manually with the training costs. Additionally we have created a report that evaluated this costs and combines them with the employee costs (derived from salary).
Best regards
Michael

Layering and event capturing

Similar Messages

Maybe you are looking for