Layout cell resize

i'm trying to have control over the layout cell but it seems
like it is snapping to some grid although i have disabled this. i
need to create an underline using a colored cell.

change the iview/cell iview isolation method property to 'embeded'
this will display the iview in full page.
Raghu

Similar Messages

Urgent help needed!! Layout table and Draw layout cell dissapeared.

I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!

> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
>

Layout cell and image repeat question

I want to put a background image into a layout cell. The
image isnt as wide as the cell - when i set the target the image
repeats itself from left to right. How can I stop this? I want the
image to appear once and once only. Should I just create a layout
cell with a smaller width and another cell next to it?
regards
Billy

in the <td> insert the following line
style="background-repeat:no-repeat"

Targeting Content to a Layout Cell

I have built a page using a layout table with a number of
layout cells. Now, I need to target some content (from a link in
one of the cells) into a specific cell.
I know how to target target a frame...but need to target a
layout cell instead!

Firstly get out of layout mode.... leads to frustration....
get into
Design/code view.
Sounds like you need the use of an IFrame....
http://www.w3schools.com/tags/tag_iframe.asp
Alans' example looks good too :-)
Nadia
Adobe� Community Expert : Dreamweaver
http://www.DreamweaverResources.com
- CSS Templates|Tutorials
http://www.csstemplates.com.au
http://www.perrelink.com.au
- Web Dev
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver
"dramurdock" <[email protected]> wrote in
message
news:e93q6e$38k$[email protected]..
> Sorry for the confusion.... I want to load an external
HTML page into a
> layout cell.
>
> Thanks!

Setting height for grid layout cell

hai,
i am creating my own layout for my framework page.i am using grid layout tag presents in htmlb.i want to set height for my grid layout cell using taglib but there is no height attribute as per i know.is there any way for that.....
if anybody knows about it please tell me. if u have an sample code also please send me...
regards,
prasath

Hi,
Try the method setHeightPercentage in both GridLayout and GridLayoutCell classes.
GridLayout result = new GridLayout();
result.setHeightPercentage(100);
Greetings,
Praveen Gudapati
[Points are welcome for helpful answers]

Select all layout cells

As i update a page with New images placed in layout cells I
need to move the previous ones down the page. How can I select all
of them and move them together instead of one at a time which takes
forever and causes alignment problems. I have tried ctrl, alt,
shift one of tghese works in every other program but not DW. Please
help

"photomann102" <[email protected]> wrote in
message
news:flbghv$ap9$[email protected]..
> As i update a page with New images placed in layout
cells I need to move
> the
> previous ones down the page. How can I select all of
them and move them
> together instead of one at a time which takes forever
and causes alignment
> problems. I have tried ctrl, alt, shift one of tghese
works in every other
> program but not DW. Please help
If you mean that you're using "Layout View", you may not get
many replies
here, because it's pretty much universally considered a poor
feature of
Dreamweaver, and nobody really wants to support it.
If that's the case, it would really be best if you
re-designed your page
without using Layout View or Layout Cells. If you're somewhat
new at this,
your best bet would probably be building the page with simple
tables in
Dreamweaver's regular Design View.
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Moving column separator causes cell resize

Hello, y'all,
I've run into a strange issue, in which the cells of a table control will resize when I move a column separator. I can't always reproduce it and I have no idea what's triggering it. Is this a known issue?
Thanks,
Slowpoke
Slowpoke
CLAD (believe it or not!), using LabVIEW 8.5
They don't call me "Slowpoke" for nothin'!

Hello, Mr. Altenbach! Right, I should've been clearer. The problem is that the cells to the *right* spontaneously resize themselves during a Mouse Move event--and to the same width, as far as I can tell. I don't know what triggers it. I'm running LabVIEW 8.5.
Slowpoke
CLAD (believe it or not!), using LabVIEW 8.5
They don't call me "Slowpoke" for nothin'!
Attachments:
Untitled 1.vi ‏20 KB

Multiple components in a gridbag layout cell

Is it possible to have two components in one cell of a grid bag layout? Say, a textfield box and some text to its immediate right? If so, can someone post an example? Thanksmuch.

Put the textfield and a label with the text in a panel. Then add that panel to your gridbag cell.

Layout and resize

Although I tried many things, I can't get out of this :
I have a java app. with a jSplitPane. On the right side, I have a JPanel hosting another jPanel with an image background.
What I'd like is that when moving the divider, my inner Panel (the one with the image) doesn't resize. It should be just displayed at the center of the other one.
Now, I used BorderLayout for the 'container' and added the second one like this :
            panel1.add(panel2, java.awt.BorderLayout.CENTER);But when I move the divider, the iner panel extends to the borders (the image is stretched).
I tried FlowLayout, but then nothing at all is displayed (??)
Any idea ?
O, BTW, the inner panel uses a grid bag Layout. Could it have an influence on its container ?

Too many panels you are having. Try none:
import java.awt.*;
import java.net.*;
import javax.swing.*;
public class SplitExample {
     public static void main(String[] args) throws MalformedURLException {
          JLabel left = new JLabel("LEFT");
          URL url = new URL("http://weblogs.java.net/jag/bio/JagHeadshot-small.jpg");
          JLabel right = new JLabel(new ImageIcon(url));
          JSplitPane sp = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT, left, right);
          JFrame f = new JFrame("SplitExample");
          f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          f.getContentPane().add(sp);
          f.pack();
          f.setLocationRelativeTo(null);
          f.setVisible(true);
}

Custom message(low stock) on alv layout cell(plng folder)

hi friends,
in plng folder(alv layout), can system displays message dynamically on a particular cell(row & col combination). eg: "low stock" via fox code. Simply i 'm deriving one cell value based on fox code (formula). If stock > 0, show stock value, else in that cell i want "low stock".
In excel , this facility is availble using "IF', formula on particular cell.
thanks

Hi Raju,
what you could do is:
- define a new calculated keyfigure which takes the stock value if it is > 0 and the value 0 in all other cases.
- define your query setting View->Properties->Value Display->Zero value display->show zero values to "low stock".
This has a similar effect. All value which are 0 in the query are displayed as text "low stock". Another option to highlight "low stock" material would be using exceptions.
Maybe this fulfills your requierement. Binding messages raised in planning function to certain cells in excel is not possible.
Regards Matthias Nutt
SAP Consulting Switzerland

Newbie question – frame and cells resizing issues

I am a newbie to ‘efficient web designing’. I
have done previously simpler works.
This is what I am trying to do this time. I am creating a
modular web site where I will be using only one design layout(800 x
600) and repeating that 3-4 times along the length of a single page
and also in all the other pages on the website ( using same layout
but different contents). The way I started is
1) Created a design layout in Photoshop
2) Created slices
3) Saved all sliced images in image folder
4) Created one large table 800x600 (size of a single layout
module) in dreamweaver
5) Created nested tables inside the main table, (based upon
different cell divisions)
6) Created cells in the tables corresponding to slice layout
in the photoshop
7) Inserted the sliced images in the corresponding cells to
recreate my photosop layout in dreamweaver.
8) The issue that I am having is that the cells are not
getting to be the size of the images.
SO HOW DO I MAKE MY CELLS FIT MY IMAGES. I tried putting the
size of my sliced images in the property box of the cells but the
cells just won’t become of that size. What is stopping them?
What could I be doing wrong? Is my working method appropriate for
what I want to achieve?
Any help would be appreciated.

Not really sure what you are trying to achieve... but
creating an 800x600
web page with Photoshop sliced images is not "efficient we
designing"
Everyone sets the size of their web browsers to a differant
size depending
on taste, visual accuity and the task at hand. Table cells
are simply
elastic containers. Think of them like a baloon. Small when
you take it
out of the bag but potentially really big with enough hot
air.
A cell will expand to fit whatever you put into it, but it
starts out small.
If you put a 200x200 slice of image as a background, you need
to somehow set
the size of the cell to 200x200, but if you put too much text
in the cell,
it will grow larger than 200x200 and leave your background
either stranded
with gaps around it or tiled and repeating itself.
If you put the slices directly into the cells, make sure you
have all
padding, cell spacing, and margins set to 0. Now, you won't
be able you put
text over the image but you could use hot spots or just
direct links from
the image.
Photoshop is an image editing program originally created for
print
applications. What you need to
consider is creating you web site in a flexible format and
augmenting your
design with images editied in Photoshop.
Best idea is get some books on html and css and learn what
you can about web
design, then add your graphics.
"yamirb" <[email protected]> wrote in
message
news:[email protected]...
>I am a newbie to ?efficient web designing?. I have done
previously simpler
> works.
> This is what I am trying to do this time. I am creating
a modular web site
> where I will be using only one design layout(800 x 600)
and repeating that
> 3-4
> times along the length of a single page and also in all
the other pages on
> the
> website ( using same layout but different contents). The
way I started is
> 1) Created a design layout in Photoshop
> 2) Created slices
> 3) Saved all sliced images in image folder
> 4) Created one large table 800x600 (size of a single
layout module) in
> dreamweaver
> 5) Created nested tables inside the main table, (based
upon different cell
> divisions)
> 6) Created cells in the tables corresponding to slice
layout in the
> photoshop
> 7) Inserted the sliced images in the corresponding cells
to recreate my
> photosop layout in dreamweaver.
> 8) The issue that I am having is that the cells are not
getting to be the
> size
> of the images.
>
> SO HOW DO I MAKE MY CELLS FIT MY IMAGES. I tried putting
the size of my
> sliced
> images in the property box of the cells but the cells
just won?t become of
> that
> size. What is stopping them? What could I be doing
wrong? Is my working
> method
> appropriate for what I want to achieve?
>
> Any help would be appreciated.
>
>

Inner Frames, GridBag Layout, and resizing

Hey,
I'm developing a online gaming lobby in Java, and at the top of my lobby I have a list of players, with red or green lights indicating whether or not that player is ready to play. Once all are ready, the host can start a countdown that takes the players into the game.
For the ready/not ready lights, I used JRadioButtons because they provide a good model for what I wanted (a sort of on/off deal). What I did was set them to be enabled when that slot is empty, but have a grey "disabled/slot empty" icon for both the selected and not selected states. Then, when a player joins, I disable the Radio Button and have the "player ready" and "player not ready" pictures set for the disabled selected and disabled-not-selected properties of the radio button.
To recap, when the slot is empty, the radio button is enabled, but looks disabled and has the same pictures for both selected and not selected. When the slot is filled the radio button is disabled but has enabled-looking pictures for 'ready' and 'not ready' states, selected and not selected respectively.
It will make more sense with a picture:
http://img151.imageshack.us/img151/4620/lobbyiz7.png
I did it this way, with sort of logically backwards JRadioButtons, because I didn't want the users of the lobby to be able to click the radio buttons and change their state, thus seemingly (and logically, client-side) changing the ready status of other players.
Anyway, I have two questions. As you can see in the screen shot, all the player names and their associated "lights" are clustered to the center. Originally, the lights and text were all flush with the edge of the separators above and below them. I am using a grid bag layout with inner panels, which all also use grid bag layouts. In the player list panel (the top one that we've been discussing), when players join, the text next to the JRadioButtons goes from "Waiting for player to join" to "Freddie" or something like that. Once you get enough players to join, the player list contracts into the center because the text in the buttons becomes smaller. Is there a way to make the radio buttons stay where they are, no matter the length of the text, with a grid bag layout?
Also, you can see from the screenshot that the disabled radio buttons (the slots that are filled with players) have the proper pictures next to them, but they still used the disabled font, which is kind of greyed out. Is there a way to make it so that the disabled font is not grey?

j.law wrote:
That's the thing, I am using a grid bag layout for everything, including the inner panels and the outer, main frame. The problem is that the inner panels resize and crunch down.Then as recommended above, simply don't do that. Study the layout tutorials and code with them. It's that simple.
Also, your "radiobutton" are not behaving as radiobuttons as they are not clickable, ... so don't use radiobuttons. Use a JLabel perhaps and swap the icons as necessary.

Layout cell width

How can I change the width of a layer cell? When I change the
width value I get an error message saying the cell will be smaller
than the minimum width allowed. I'm guessing I have to go back and
reset some page properties but have't figured out how.

The correct way would be to use css to allocate a width.
However, let the
width be determined by whatever is inside it. If you set the
width to
100px, but place an image inside the cell that is 120px, then
the cell will
stretch to fit that image, it will not honour the 100px
width. This would
also apply whether you specified a width via a stylesheet.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"griehund" <[email protected]> wrote in
message
news:f1g6j3$bs$[email protected]..
> How can I change the width of a layer cell? When I
change the width
> value I
> get an error message saying the cell will be smaller
than the minimum
> width
> allowed. I'm guessing I have to go back and reset some
page properties
> but
> have't figured out how.
>
>
>

Tree view Layout set resizing when accessed by URL

Hi,
We have a problem when we try to display a KM folder through the the ConsumerTreeList Layoutset. The height of the tree view is set based on the content in the right hand side, and ignores the left hand side of the tree. So for example if we have 5 items in the tree on the left hand side, and only 1 in the right hand side then the height of the tree view is really small (approx 1-2cm) and we have a scroll bar on the left hand side.
This does not happen through a km navigation iview and never used to happen prior to us installing SP18.
The URL we are using is below. Has anyone experienced this or know of a work around when using a URL? The same sizing issue occurs when previewing the layoutset through the User Interface --> Settings menu where you create layoutsets.
/irj/servlet/prt/portal/prtroot/com.sap.km.cm.navigation/AMPS/Documents/Corporate?ConfigFileName=Navigation.xml&StartPage=NavigationPage&Validate=false&rndLayoutSet=ConsumerTreeList&layoutSetMode=exclusive
Thanks
Warren

Hi,
I have the same issue,
and sometimes maybe related to an Exchange Problem.
try reading this
http://support.microsoft.com/kb/2212449
and this
http://social.technet.microsoft.com/Forums/office/en-US/2da6c752-5221-4dbc-b1fe- 6aac0c059176/outlook-2010-moves-message-directly-to-deleted-items-how-can-i-dete rmine-why-this-has-happened
for me the "AutomateProcessing" value on the mailbox was right,
so I looked for an iPhone issue...
let me know,
bye,
Fabio

Table Cells in Layout Mode vs WYSIWYG

I am new to Dreamweaver and am using v8.0. When designing a
page using Tables and Cells in Layout Mode the layout looks fine;
the Cells are nice and tight. However - and this regardless of
which Browser I use to check the page - the spacing between those
same Cells is wholly unacceptable. As mentioned, in Layout Mode
everything is tight; when viewing it in a browser there may be up
to 2" of space between the Cells.
What have I over looked? Any suggestions greatly appreciated!
Thanks!

Table width = 1327? Don't ever make your width more than
about 770. As for
the spacing .. I have never seen so many empty table cells in
my life. :)
As the others have said, you will do far better by learning a
little html
and css .. "adhering to conventions" will never happen with
Layout Mode.
It's there so people can draw tables .. but if I were DW
Engineering, I
would remove it .. I think it causes more problems than it's
worth. :)
Nancy
"LGLDSR73" <[email protected]> wrote in
message
news:[email protected]...
> Thank you, Nancy!
>
> Cellspacing=0 set as such:
>
> <table width="1327" border="0" cellpadding="0"
cellspacing="0">
>
> I seem to have it squared away now but that doesn't mean
that I am
> adhereing
> to conventions. What I was doing was selecting 'Layout
Table' to enclose
> all
> Images and text (and/or using 'Draw Layout Cell' as
well), as opposed to
> (1)
> Using 'Layout Table' to set the page size, then (2)
using 'Draw Layout
> Cell' to
> put the images and/or text in. What I am seeing now in a
Browser (Safari)
> is
> matching up to what I am seeing in Dreamweaver. I don't
think I fully
> grasp the
> differrence between 'Layout Table' and 'Draw Layout
Cell'. I've been
> reading in
> the 'Help' and while it sheds some light it doesn't
appear to be getting
> through.
>
> Though the spacing of the images appears to be okay now,
text is an issue.
> I.e.,
>
> If I put:
>
> "The text will end here -------->" with the arrowhead
at the rightmost
> border
> in Dreamweaver, when viewed in Safari it wraps to the
second line even
> though
> within Dreamweaver I am not outside of the green
frame....
>
> What is a recommended page size to start with, and set
with which Tool?
>
> Finally, when I attempt to use Firefox to preview the
page the following
> error
> is returned:
>
> File not found
> Firefox can't find the file at /2 WD/NEW
SITE/index.html.
> * Check the file name for capitalization or other typing
errors.
> * Check to see if the file was moved, renamed or
deleted.
>
> I purchased 'Dreamweaver 8 For Dummies' but apparently I
transcend even
> that!
> ;-)
>
> The Code is attached, but please don't spend more than a
quick moment;
> this is
> my problem and not yours!
>
> Thank you!
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1" />
> <title>index</title>
> <style type="text/css">
> 
> </style></head>
>
> <body>
> <table width="1327" border="0" cellpadding="0"
cellspacing="0">
> 
> <tr>
> <td width="116" height="30"> </td>
> <td width="136"> </td>
> <td width="69"> </td>
> <td width="264"> </td>
> <td width="24"> </td>
> <td width="107"> </td>
> <td width="20"> </td>
> <td width="234"> </td>
> <td width="16"> </td>
> <td width="338"> </td>
> <td width="3"> </td>
> </tr>
> <tr>
> <td height="41"> </td>
> <td> </td>
> <td> </td>
> <td colspan="2" valign="top"><h1 align="center"
class="style2"><span
> class="style1">Fifth Avenue Digital
</span></h1></td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> <tr>
> <td height="39"> </td>
> <td> </td>
> <td> </td>
> <td></td>
> <td></td>
> <td></td>
> <td></td>
> <td></td>
> <td></td>
> <td></td>
> <td></td>
> </tr>
> <tr>
> <td height="47"> </td>
> <td colspan="5" rowspan="4" valign="top"><img
src="Images/main
> image.jpg"
> alt="main page cape cod" width="600" height="460"
/></td>
> <td> </td>
> <td rowspan="2" valign="top"><img
src="Images/9j.jpg" alt="router bit"
> width="234" height="350" /></td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> <tr>
> <td height="303"> </td>
> <td> </td>
> <td> </td>
> <td rowspan="2" valign="top"><img
src="Images/06.jpg" alt="sand"
> width="337" height="333" /></td>
> <td> </td>
> </tr>
> <tr>
> <td height="30"> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
>
>
>
>
>
>
>
> <tr>
> <td height="80"></td>
> <td></td>
> <td></td>
> <td></td>
> <td></td>
> <td></td>
> </tr>
>
>
>
> <tr>
> <td height="30"> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> <tr>
> <td height="77"> </td>
> <td> </td>
> <td colspan="2" rowspan="2" valign="top"><img
src="Images/ramp.jpg"
> alt="boat ramp rockport" width="333" height="500"
/></td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td colspan="3" valign="top"
nowrap="nowrap"><h1 align="left">This is
> a
> test of inputting text that is going</h1>
> <h1 align="left">(new paragraph) to end right here
-------->
> </h1></td>
> <td> </td>
> </tr>
> <tr>
> <td height="424"> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
>
>
>
> <tr>
> <td height="179"> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> </table>
> </body>
> </html>
>

Layout cell resize

Similar Messages

Maybe you are looking for