Layouts Problem in OBPM10GR3 Enterprise

Hi all,
1) I created layouts in studio.
2) Deployed the process to the enterprise server with the layouts.
3) Then changed the layouts in studio again. Added a new layout and removed the old one.
4) The Re-Deployed the process to the enterprise server with the new layouts.
But the old layouts which were deleted in studio are also still seen along with the new layouts.
How do we delete the old layouts from the enterprise server?
I have undeployed all previous versions of the process too but the layouts don't seem to be removed?

Log in the workspace with the admin user, the same user that you use to connect to the process administrator and you should be able to remove the layouts in the workspace.
To delete them you have to enable the edit mode in the workspace.
HTH
Edited by: Ruben Vidaurre on 15-jul-2011 14:34

Similar Messages

CSS Layout Problem?

Can someone please help me with a layout problem.
As far as I can tell the page looks as it should in Netscape,
Firefox, etc., but IE6 and 7 refuse to work correctly.
The page I am working on is:
http://www.vmtampademo.com/localangler/testpage.html
Most of the picture caption and headline of the middle column
is behind the picture. I attempted to force the info with a
seperating div which seems to work sometimes. I doubt that this is
the correct solution. What am I doing wrong?
Thank you for the help!

It looks fine in Firefox 2.0.0.1, Opera 9.10, and IE 7.

Layout problem in PDF conversion

Hi all,
i am downloading spool data using the function module CONVERT_ABAPSPOOLJOB_2_PDF. But i am facing layout problem. e.g. RFBILA00(financial statement generation program) has written balancesheet data to the spool. This spool data has some 6 columns. but CONVERT_ABAPSPOOLJOB_2_PDF is writing only first 3 columns to the generated PDF file. i used 'GET_PRINT_PARAMETERS' function module also with values like layout as 'X_65_132' and 'X_90_120'. but no success. if anybody knows the answer, please let me know.
Thanks in advance,
Naveen

Hi All,
i am following the below approach to download the information from spool.
program/spool output is an ALV List output data having 8 columns. but below approach is converting only first 5 columns in to PDF format. other 3 columns are getting truncated.
FUNCTION /ngl/download_spoolinfo_as_pdf.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_SPOOL_REQUEST) LIKE TSP01-RQIDENT
*"     REFERENCE(I_FILENAME) LIKE RLGRAP-FILENAME
*" EXCEPTIONS
*"      DOWNLOAD_ERROR
TABLES tsp01.
DATA: mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE,
        mc_filename LIKE rlgrap-filename.
DATA: mstr_print_parms LIKE pri_params,
        mc_valid(1) TYPE c,
        mi_bytecount TYPE i.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      copies                 = '1'
      cover_page             = space
      destination            = 'locl'
      expiration             = '1'
      immediately            = space
      mode                   = space
      new_list_id            = 'X'
      no_dialog              = 'X'
      user                   = sy-uname
      line_size              = 200
      line_count             = 65
     layout                 = 'X_65_200'
      layout                 = 'X_90_120'
      sap_cover_page         = 'X'
    IMPORTING
      out_parameters         = mstr_print_parms
      valid                  = mc_valid
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF sy-subrc EQ 0.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid              = i_spool_request
        no_dialog                = 'X'
        dst_device               = mstr_print_parms-pdest
      IMPORTING
        pdf_bytecount            = mi_bytecount
      TABLES
        pdf                      = mtab_pdf
      EXCEPTIONS
        err_no_abap_spooljob     = 1
        err_no_spooljob          = 2
        err_no_permission        = 3
        err_conv_not_possible    = 4
        err_bad_destdevice       = 5
        user_cancelled           = 6
        err_spoolerror           = 7
        err_temseerror           = 8
        err_btcjob_open_failed   = 9
        err_btcjob_submit_failed = 10
        err_btcjob_close_failed = 11
        OTHERS                   = 12.
    IF sy-subrc EQ 0.
      mc_filename = i_filename.
      DATA: lv_filename TYPE string.
      lv_filename = i_filename.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize = mi_bytecount
          filename     = lv_filename
          filetype     = 'BIN'
        TABLES
          data_tab     = mtab_pdf
        EXCEPTIONS
          OTHERS       = 22.
      IF sy-subrc EQ 0.
        WRITE:/ mc_filename, 'CONVERTED TO PDF AND DOWNLOADED'.
      ELSE.
        WRITE:/ 'PROBLEM WITH DOWNLOAD'.
        RAISE download_error.
      ENDIF.
    ELSE.
      WRITE:/ 'PROBLEM WITH PDF CONVERSION'.
      RAISE download_error.
    ENDIF.
ELSE.
    WRITE:/ 'PROBLEM GETTING PRINT PARAMETERS'.
    RAISE download_error.
ENDIF.
ENDFUNCTION.

Layout problem - multiple repeating frames

Hi, I have a layout problem, pls help!
Short report description:
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
- - - - .. other repeating frames ..
When reaching the bottom of a page, and there is not enough room to print a record for Repeating frame 2, a record from Repeating frame 3 is printed in the bottom.
Next page starts with the remaining records from Repeating frame 2.. and then the remaining records from Repeating frame 3.
For example:
Page 1:
Rep frame 2 - Record 1
Rep frame 2 - Record 2
Rep frame 2 - Record 3
Rep frame 3 - Record 1 -- not enough space to print Record 4, so this record is printed
Page 2:
Rep frame 2 - Record 4
Rep frame 2 - Record 5
Rep frame 3 - Record 2
How can i ensure that all records from Rep frame 2 is printed before records from Rep frame 3?

Hi, thanks for helping me out!
I tried to use anchors, but they had no effect when connecting top of 3 to bottom of 2, got the same layout.
I then tried to create frames with vertical elasticity expand around both rep frame 2 and rep frame 3, and it seems to do the job.
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Frame 4 - vertical elasticity expand
- - - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Frame 5 - vertical elasticity expand
- - - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
and so on..
Thanks again

Layout Problem in swings

I have an Layout problem. My Applications consists of a label and a panel in which some more labels are present.
The panel should contain the scrollbar in order to view all the label that excced the size of the panel.This label and a panel should be adjacent to each other.
My problem is, I am not getting the scroll bar to the panel when I am adding the label that excced the size of the panel, when I am adding the label adjacent to this label.

Did you use JScrollPanel? If not, use it.

[solved] layout problem in amarok 2.02

Hi,
Here, I have a bad layout problem with amarok 2.02. Amarok does not fit on my screen which is 1400 pixels large! I cannot reduce the part where the collection is shown. So that it is really unpractical to use.
I uploaded a snapshot to illustrate the problem (it is the full screen!):
emmanuelfavrenicolin.free.fr/Public/Sna … ok202.jpeg
Someone have the same problem ?
I tried to install svn version but I stopped after 3 hours of compilation, it is quite a big application.
Last edited by manouchk (2009-05-23 06:28:43)

Well, I tried amarok2-devel 2.0.90-1 but the problem of graphic layout remains similar, no improvement. Is it normall? Maybe amarok is only available for computer with screen >= 1600x1200 or is there an hidden configuration file where I could tweek this?
Last edited by manouchk (2009-05-18 02:41:03)

Urgent: Layout problem in "light inner page"

Hi Experts,
I am facing a problem in portal content area on external facing portal. I see a vertical scroll bar which restricts application from being displayed on entire screen.
I am getting this problem after a patching of EP 7.0, before patching every thing was running fine.
To me it looks like a layout problem in "light inner page", When I use "Light - 1: column (Full width)" layout I get a vertical scroll bar on portal. When I use default layout then this vertical scroll bar disappears but I see an empty navigation bar on left side which is not required.
Can some one advise a solution for this.
-Lave

hi,
Similar problem in this thread. check it out
Desktop inner page lost
Regardss,
Ganesh N

Div layout problem

Hi - stuck on what I think should be a fairly basic layout problem:
I have 2 divs, equal widths but varying heights, one floated to the left and one to the right so that they appear next to eachother on the page. The one on the left contains varying amounts of text, the one on the right contains a flash player so never varies.
Where the text for the left div is long, I want it to start off next to the player, but then flow beneath it rather than continuing downwards at the same width as the div. If I remove the width of the left div, so that it reverts to the container width, the player div positions itself below it, so I can't work out how to get the effect.
Can anyone help?

Hi,
hope I understood in the right way: I used (translated from German DW) "modify table" and so I got one more row and two columns in your Main_Content. In one of the new columns I copied the image and beneath I took the text (you now can replace with image and text of your choice), like this:
If that's not a help for your question, please ask me again.
What concerns the width of the pictures, I would format them with PS or a similar program in the same wide.
Hans-G.

FW: Problem on Web Enterprise HTTPAccess

From: Doug Wheeler
Sent: Friday, October 23, 1998 9:17 AM
To: [email protected] <mailto:[email protected]>
Cc: [email protected] <mailto:[email protected]>
Subject: RE: Problem on Web Enterprise HTTPAccess
Peter,
I received this same error. In my case our web app would run deployed but
not from the partition workshop in the development environment.
In our development environment we have NT client nodes and UNIX server
nodes. Since deployed Web apps have no FORTE client you should not need to
install the HTTP library on anything other than the node that is going to
run the Access service (UNIX node). But, when running from the partition
workshop in the development environment most of the application code is
actually run on the client so in your development environment you must make
sure that the HTTP library is also installed on this node.
I would suggest that you first install the HTTP library as NOT compiled.
Once you have everything working with the HTTP library NOT compiled, then
mark it as compiled. Marking the HTTP library as compiled in our
development environment with Windows-NT developer nodes also required us to
set the LD_Library_Path environment variable on the client node. This
environment variable must be set to the directory containing the http.dll
(in my case d:\forte3g\userapp\http\cl0).
Good luck!
Douglas Wheeler
Consultant
Forté National Practice
BORN Information Services (http://www.born.com <http://www.born.com>
<http://www.born.com <<a
href="http://www.born.com">http://www.born.com</a>> > )
Tel: 612.404.4379
Email: [email protected] <mailto:[email protected]>
<mailto:[email protected] <<a
href=
"mailto:[email protected]">mailto:[email protected]</a>> >
-----Original Message-----
From: Peter Sham (HTHK - Assistant Manager - Software
Development,
IITB)
[SMTP:[email protected]] <mailto:[SMTP:[email protected]</a>]>
<mailto:[SMTP:[email protected]</a>] <<a
href=
"mailto:[SMTP:[email protected]">mailto:[SMTP:[email protected]</a>]> >
Sent: Thursday, October 22, 1998 10:18 PM
To: forte-users
Subject: Problem on Web Enterprise HTTPAccess
Hi,
We are using Web Enterprise 1.0.B with Forte 3.0.G.2. We have
problem on
starting up partition with service object subclassed from
HTTPAccess. This
seems to happen mostly in interpreted mode. In compiled mode,
the
partition
seemed quite stable. The exception that we get is something
like
Forte is
trying to cast HTTPAccess into the sub-class that we wrote, and
of
course,
it is illegal and the partition returned an exception.
This exception made us very difficult to continue development on
Web
Enterprise. Can anyone help?
Best regards, Peter Sham.
To unsubscribe, email '[email protected]' with 'unsubscribe
forte-users'
as the body of the message.
Searchable thread archive
<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>
<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>
<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> > >
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Peter,
Now that I think about it more, I remember that we also had a problem with
some corrupted memory during start up of our HTTPAccess subclass. We had
two threads accessing the same array during start up. I think that we may
have gotten this error message before we fixed that problem. Sorry my
memory on this subject isn't better.
Regards,
Eric Rasmussen
-----Original Message-----
From: Peter Sham (HTHK - Assistant Manager - Software Development, IITB)
[SMTP:[email protected]]
Sent: Thursday, October 22, 1998 11:18 PM
To: [email protected]
Subject: Problem on Web Enterprise HTTPAccess
Hi,
We are using Web Enterprise 1.0.B with Forte 3.0.G.2. We have problem on
starting up partition with service object subclassed from HTTPAccess.
This
seems to happen mostly in interpreted mode. In compiled mode, the
partition
seemed quite stable. The exception that we get is something like Forte is
trying to cast HTTPAccess into the sub-class that we wrote, and of course,
it is illegal and the partition returned an exception.
This exception made us very difficult to continue development on Web
Enterprise. Can anyone help?
Best regards,
Peter Sham.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Design/Layout Problem in OOTB SP "Docs I'm following" page

Hello
The "Docs I'm following" My Sites page in SP 2013 has the following layout problem:
Long document titles overlap with other elements (see also screenshot).
Note: This is default SP, i.e. we have not deployed any custom branding.
I guess this is a problem which can easily be corrected even without having to wait for a SP update. Since I'm not very good with design changes I would be grateful if you could provide
us with a quick fix, e.g. an updated css file.
Thanks a lot.
Best regards
John

Hi ,
For your issue, you can add the following code into your MySite MasterPage:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$(".ms-contentFollowing-itemTitle a").each(function(i){
$(this).text(shorten($(this).text(),32));
function shorten(text,maxLength) {
var ret = text;
if (ret.length > maxLength) {
ret = ret.substr(0,maxLength-3) + "...";
return ret;
</script>
Best Regards,
Eric
Eric Tao
TechNet Community Support

Using null Layout - Problems

Hullo - I've written a little app that, because of the nature of what it does, prettymuch requires the use of null layout. It works well enough, but there are a few points where it does strange things that I don't understand. I haven't been able to find any good docs anywhere for how exactly layout/rendering works. The Swing tutorial, for example, almost completely ignores the topic.
Basically, I set the layout to null, add my components, use setBounds...but then nothing happens. In order for anything to be visible, I have to call pack() before I call show(). What is pack? What does it do? How can Sun's null layout examples work even though most of them don't use it?
Second, if I create JFrame of a certain size, and add a component that goes off the bottom of the JFrame (on purpose), then expand the size of the JFrame to reveal the bottom part of that component, it doesn't paint - there's just a grey area. No amount of repaint() pack() or anything will cause it to show. The only way I've found to do it is to make the JFrame larger to begin with, add the component so that it's visible, then resize to the smaller size, which is kind of ugly and clunky.
I basically do not understand why Swing is doing the things it does; why it paints sometimes and not other times, where it paints, when it paints, where it shows objects, how it packs them, etc. I would be very grateful if someone could englighten me!

Hullo - I've written a little app that, because of the
nature of what it does, prettymuch requires the use of
null layout. It works well enough, but there are a
few points where it does strange things that I don't
understand. I haven't been able to find any good docs
anywhere for how exactly layout/rendering works. The
Swing tutorial, for example, almost completely ignores
the topic.
Basically, I set the layout to null, add my
components, use setBounds...but then nothing happens.
In order for anything to be visible, I have to call
pack() before I call show(). What is pack? What
does it do? How can Sun's null layout examples work
even though most of them don't use it?
Second, if I create JFrame of a certain size, and add
a component that goes off the bottom of the JFrame (on
purpose), then expand the size of the JFrame to reveal
the bottom part of that component, it doesn't paint -
there's just a grey area. No amount of repaint()
pack() or anything will cause it to show. The only
way I've found to do it is to make the JFrame larger
to begin with, add the component so that it's visible,
then resize to the smaller size, which is kind of ugly
and clunky.
I basically do not understand why Swing is doing the
things it does; why it paints sometimes and not other
times, where it paints, when it paints, where it shows
objects, how it packs them, etc. I would be very
grateful if someone could englighten me!Okay, I think you should call setVisible(true); instead of pack then show. Pack basically organizes the components so they take up the least amount of room, and then it shrinks the frame to as small as it will go without hiding any components. It think if you call revalidate() instead of repaint(), should solve your problem.
The other thing to do, is (hehe) make your own components

Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2

Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+     libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+     libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+     libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+     yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+     yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+     yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Roger

error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies.

Help needed with a layout problem

I'm trying to build a JTabbedPane where each tab has a grid of buttons. The number of buttons is variable, and I'd like the buttons to flow sort of like with FlowLayout, with four columns. I need all the buttons to be the same size, even across tabs. I tried GridLayout, which doesn't work when I have too few buttons to fill a row. It fails in different ways, depending on how I set things up. If I try to set the layout to GridLayout(0, 4) (four columns), then if one tab has one row and another has two, the buttons on the one-row tab expand vertically to the height of the two-row tab. If I try GridLayout(2,4), then if a tab has only one button, it expands horizontally to the maximum width of any of the tabs. (It also has the further problem that if the maximum number of buttons on any tab is 6, they are placed in a 2x3 array; I'm trying to get them to be 4 buttons on the first row and 2 on the second.)
I'm hoping there's a standard layout manager that can do the job, but I'm not too familiar with the Swing manager classes. Can I get what I want without writing my own layout manager?
Thanks,
Ted Hopp
[email protected]

I didn't think it was specifically a Swing question.Well, its either Swing or AWT, people who develop GUIs are the ones who are going to have experience using layout managers.
but if someone can point the way to how to do this with GridBagLayout, nested containersSince you finished reading the tutorial, what have you tried? You've explained your problems using a single layout manager, so what problems are you having using nested layout managers?
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

Help needed with Layout problem

Hello everybody
I need to insert components such as buttons in a JPanel using absolute positioning
I still cant dot this
even if I used the method setLocation for the component
I wanna know if I have to change the default layout for JPanel or whatever
thanks a lot

i found this quite useful:
http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html#border
dont know if it will specifically help with your absolute positioning problem.

Problem with EM (Enterprise Manager is not able to connect to the database)

Hi all,
I've Oracle DB 11g Rel.1 installed on Windows XP SP3. The database is up and running i.e. everyone can connect to the DB by using any App tool e.g. SQL*Plus, Forms, or Reports. It means that the listener and the service is running. But the problem is that when I try to start the EM I see some error messages on the webpage.
It says:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.Database Instance (Green arrow)
Status     Open                         Details     The instance is open.
Host          shiman
Port          *1521*
SID          orcl
Oracle Home     d:\Oracle\product\11.1.0\db_1
Agent Connection to Instance (Green arrow)
Status Succeeded
Details
Listener (Green arrow)
Status     Up
Host          shiman
Port          *1521*
Name          LISTENER
Oracle Home     d:\Oracle\product\11.1.0\db_1
Location     d:\Oracle\product\11.1.0\db_1\network\admin
Details
please see the attached file:
http://rapidshare.com/files/404840300/em.JPGI've already checked all the services, they are running. And when I execute emctl command I got the following message.
emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://shiman:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.I have checked some documents around config files in sysman and test_orcl\sysman directories. Moreover, I have checked dbsnmp and sysman account for unlockness and password accuracy. But they did not help me to solve the problem.
My question is if every thing is working fine then what is the problem with the EM? Why it is not connecting to the DB?
Thanks.
Iman

emdctl.trc2010-07-13 18:42:21 Thread-2196 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:26 Thread-4856 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:28 Thread-5684 ERROR ssl: nzos_Handshake failed, ret=28864
2010-07-13 18:42:28 Thread-5684 ERROR http: 1704: Unable to initialize ssl connection with server, aborting connection attempt
2010-07-13 18:42:28 Thread-5684 ERROR main: nmectla_agentctl: Error connecting to https://shiman:3938/emd/main. Returning status code 1
emoms.trc2010-07-13 18:45:44,562 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,875 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,921 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,078 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,125 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,140 [ApplicationServerThread-3] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,187 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,234 [ApplicationServerThread-5] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,281 [ApplicationServerThread-4] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,328 [ApplicationServerThread-6] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:48,984 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
     at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1853)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:260)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:1113)
     at oracle.sysman.emSDK.svlt.PageHandler.myRender(PageHandler.java:1173)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:597)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR em.console doGet.357 - java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
     at com.evermind.server.http.EvermindHttpServletResponse.sendRedirect(EvermindHttpServletResponse.java:1339)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:806)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Layouts Problem in OBPM10GR3 Enterprise

Similar Messages

Maybe you are looking for