Lbuilder created characterset not showing in web runtime of 10g oracle form

I have a case wherein database characterset is AR8ISO8859P6. Legacy system was form 3 application working from 7.3 database. In the legacy database there are some characters e.g. CHR(247) till CHR(250) which are being depicted as special character. Recently we migrated the database to 10g and forms to 10g Forms on Windows. On Windows we have set characterset as AR8MSWIN1256. Database characterset we still retained it to AR8ISO8859P6. The forms are showing all characters correctly except the 4 characters mentioned earlier i.e. CHR(247) to CHR(250) it all comes as reverse ?. Tried using lbuilder and define new characterset using AR8MSWIN1256 as the base characterset. After creating NLB files with the changes required, replaced NLS_LANG registry entry for AS to point to this new characterset still for the 4 characters the value is shown as reverse ?. Tried to change ReplaceCharacter in lbuilder to space character to make sure it works and used this new NLB this time instead of reverse ? it shows space for all 4 characters in SQLPlus what could be the problem
Steps taken for nlb creation was
1. Open existing object i.e. AR8MSWIN1256
2. Modified characterset name and also character set ID as per oracle recommended standards
3. Went into 'Character data' tab. For the 4 characters i.e. 0xF7 to 0xFA put glyph and specified unicode values \ufef5 for 0xF7.
4. Went into classification tab and classified 4 characters as LETTER
5. Generated NLB. Replaced boot and copied NLB to nls\data
6 Modified NLS_LANG entry for the AS
Problem still persists. Please give suggestion whether the creation and usage of NLB was correct. Since its 10g web based forms so the NLB files (boot lx1boot.nlb and newly created nlb) was placed in the AS's nls\data folder
Edited by: user11977409 on Jan 17, 2011 4:17 AM

The forum for Globalization Support (NLS) issues is:
Globalization Support
Database characterset we still retained it to AR8ISO8859P6Note that some of the characters from win-1256 and at least ten arabic letters are not defined in ISO 8859-6. http://en.wikipedia.org/wiki/ISO/IEC_8859-6 (- compare to http://msdn.microsoft.com/en-us/goglobal/cc305149)
Likely you risk data loss by using this database character set (for Arabic windows clients).

Similar Messages

  • Forms built in 6i is not showing up in Runtime in 10g

    Hi,
    In Forns 10g developer I compiled a form built with Forms 6i but when I try to execute it, the internet explorer launches and show blank i.e form is not appearing in 10g runtime. status bar says Applet Started.
    Thanks.

    I am also trying to convert a 6i program to 10G. I was having problems and so I decided to start over. I took an existing 10G form and tried to save it to a new name so that I could modify it and save it as a new form. The problem is that when I open the existing form I get a warning message "FRM-10102: Cannot attach PL/SQL library sb_error. This library attachment will be lost if the module is saved." So I cannot save it to a new form name without loosing the library attachment. Without this library attachment, my form does not load properly when executed. Any thoughts?

  • Document Flags not showing on Web Excel

    We are using BW3.5 SEM4.0.
    Documents are added to cells in planning layouts.
    Documents flags are showing up on web and BEx reports. They are also showing up on non-Excel web planning layouts, and Excel Gui layouts.
    The flags are, however, not showing on Web Excel layouts. Althought the document could still be viewed, if you know which cell they are located in.
    Is there a solution to this? Thanks for reading.
    William

    Hi guys,
    I have a related problem: I set up BPS to handle the documents (and I already tested it, it works fine).
    My 4 characteristics are WBS element, version, fisc per, and material.
    Now, I am just creating a web reports that should also display these documents. What do I have to adjust in the Query designer? Do I have to restrict the report to exactly this combination to see them?
    (I have tried Query properties ->Display ->Display Document links, it shows icons per column, but does not display any BPS document I created)
    any help is appreciated
    thanks,
    martin

  • Crystal Report Viewer icons do not show in Web Application Project in VS2005 (Web Site Project OK)

    Post Author: jsdude99
    CA Forum: Crystal Reports
    Hi,
    With Visual Studio 2005, the Icons at the top of the CrystalReportViewer do not show on Web Application Project. However, If I have a web site project, they are all shown. Please note that I found number of posts that people not seeing the icons after the deployment but my case is the development environment. Once I pass the first hurdle I may face further problems like the other people, so If you happen to know answers in both situations, please share your knowlegde..
    PS: I created two new types of projetcs and have just a CrystalReportViewer on the default page. Data is shown fine but the icons are missing (red X placeholders instead of icons) in Web Application Project. Very straight forward test.

    We havent tried that.  We changed the link in the web part to access an html page that claims that the report is loading.  It states in the html that if the page doesnt load to "click here" which redirects to the crystalreportviewer.  Its a temp fix for it.  One thing we are looking at is the 64 bit version of the Sharepoint integration kit.  That may contain a reportviewer webpart.
    Thanks for the reply.
    Brian

  • Wlst command listWebServices() does not show all web services in the domain

    Hi, I am trying to use wlst command listWebServices() to display all web services of a domain. It seems that it only displays the web services of enterprice applications (ear apps), but it does not show the web services of web applications (war apps). If I pass ear appliication name and one of its web module to listWebServices, it will show the web services that belong to the web module of this application. However if I pass war application name and its web module name to listWebServices, it will return "Unable to find the SOA Composite or Service. Oracle UCM Native Web Services", although I can see from wls admin console or em that this web application does have a couple of web services.
    I also tried to call listWebServicePolicies, again it returned "Unable to find any Web Services with the specified Application".
    My purpose of doing above is to use wlst to detach/attach web service policies for some web services. Since I cannot find the web services, I off course cannot detach/attach policies.
    Does anyone have any clue how to find web services using wlst command that belong to a war application, and then detach/attach policies ? Any help will be greatly appreciated.
    Thanks,
    Jian Huang
    From Oracle fusion HCM

    As of UCM version 11.1.1.6, Oracle UCM Web Services are managed from Enterprise Manager in Fusion Middleware Control, not Weblogic Admin Console!
    A document at Oracle support explains this in more detail: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=1456506.1 :
    Setting up GenericSoapService in WLS to use WS-Security:
    Go to FMW Enterprise Manager. http://wlshost:7001/em
    In the tree, navigate to Weblogic Domain -> <Domain Name> -> and click on UCM_server1. (If the managed server for WCC is named something other than UCM_server1, click on that name.)
    From the UCM_server1 drop down menu, select "Web Services".
    On the "Oracle Infrastructure Web Services" tab, click the GenericSoapPort link.
    Once there you can set the policies you want and restart the server!
    Regards,
    Göran
    Edited by: Göran Paues on 2012-aug-20 10:02

  • How to show the result of query in oracle forms 10g to Excel Sheet File

    Dear All,
    I have query and i want the result to be show in excel sheet file in oracle forms
    for example if i have a form with search criteria and when pressed the button of ( export to excel ) the result is
    excel file contains the result of the query .

    The only method to achieve this is with the help of Webutil. Please go through documentation for more help.
    Regards,
    Manoj Chakravarthy

  • Cummulated kpi which is created in BEX dssigner is not showing in WEBI Side

    I am facing below issue
    i have create one  kpi working capital commutative in Bex designer  which is cumulation  .its working fine
    means result is coming cummulated in bi side. but in WEBI side above kpi is NOT Showing . Already I Have  allow external access to this query
    Please advise me the above issue
    Thanks
    Nishant

    Hi suman,
    PFA attached screen shot and detail about above problem
    In BEX designer side we create two KPI one is not cumulated and other one is Cumulated .but on WEBI  side ONLY ONE KPI Which is non cumulated in nature is showing and other one which is cumulated nature is not showing
    For Ref purpose i have attached screen shoot
    1) First pic show KPI Is  cumulated in nature
    2) Second Pic KPI Is Non cumulated in nature
    3) third pic show on Webi side on that side only comulative  KPI is shown

  • Chart is not showing in Web Query

    Hi,
    I tried to display the query in web. The table was showing fine with all the information.
    However, when I clicked the graph tab for showing the information in chart, the chart is not showing and I got an error message saying 'Chart "GR2Chart": Data Provider does not contain any data'
    Do you think I need to create the chart first using Web Application Designer?
    Thanks a lot for your help.

    Hi all,
    Thanks a lot for the answers. Unfortunately, the problem can't be solved yet.
    I have asked the BASIS to check IGS Service, and it has been installed and has been restarted too but it didn't help.
    Regarding the web application designer, we don't need to create the web layout on web application designer right? You can publish the query automatically from web publish button on query designer. Only workbooks that we need to create the web layout on web application designer.
    It's just wierd that the table is showing the data but on the chart, it's saying there is no data.
    Thanks for your help by the way.

  • Flash Controls Not Showing On Web Page

    Hi-
    Been beating my head lately using Flash Pro 8 and DW 8.02.
    Here is the latest difficulty:
    Created a Flash video file in Premiere Elements 4
    Imported the .flv Flash video file into Flash 8 using import
    video
    Added an external skin to the video
    Saved Flash .fla file
    Exported movie in .swf format
    I can open the .swf file in Flash Player 8 and it works fine.
    I can also use the Publish setting in Flash to export the necessary
    files as well as the HTML file. When viewed in either Firefox or IE
    it plays correctly and the player controls are present. However, if
    I create a new page in DW8 and then Insert > Media > Flash,
    point it to the .swf file and then view it in Firefox or IE I can
    only see the .flv Flash video file and none of the controls/skin
    that should be there. I know the controls/skin are actually present
    because I can browse directly to the .swf file and it displays
    works properly. I can also use the publish settings from Flash to
    create the HTML page and it works correctly as well. It is only
    when the page is generated by DW8 that I get this problem. I have
    looked at the code created by DW8 and cannot find any reference to
    the .swf file for the movie controls/skin. Any idea why DW8 would
    only be placing the Flash video .flv file on the page and not
    writing the code to place the entire Flash movie .swf on the page?
    I have tried restarting/rebooting, created a new "clean" test page
    with only the Flash movie on it and it is always the same. The
    other thing that is weird is I did not select Autoplay or Loop in
    the DW8 settings nor in Flash 8, yet when I preview the page
    created by DW8 in a browser, piece of the Flash movie I can see
    (the Flash video part) autoplays and loops!
    Again, any help is appreciated.
    -=SB

    Update- This is what I have discovered while playing around
    with the page and Flash file:
    If I create the .swf files for the movie and skin and then
    save them to the same directory as the .Flash video file and then
    view the .swf file everything works fine.
    If I then create a web page using DW8 and insert the Flash
    into the page and save the web page to the exact same directory as
    all the other files and then view the web page in a browser, it
    works fine. However, if I create a new web page in DW8, save it to
    any other directory other than the one where the .swf and .flv
    files are located and then view the page in a browser only the .flv
    Flash video portion of the movie will display in the browser--the
    controls are missing. However, if I browse directly to the .swf
    file and avoid going through the DW8 generated web page the Flash
    movie displays properly with the controls in the correct location.
    My question then is why will DW8 not show the Flash movie with
    controls if the page is located in higher level directory than the
    .swf and .flv files and yet browsing directly to the .swf file with
    my browser works just fine? I have checked the path to the .swf
    file in the DW8 source code and it is pointing to the correct
    directory location. This is so strange--why will it display one way
    and not the other? Any ideas?

  • New tables & indexes created do not show up in dba_segments view

    Dear all,
    I have created 3 tables and some indexes, but these objects do not show up in dba_segments view. Is this a normal behaviour? Previously, with dictionary managed tablespace, I can specify the minimum extent to create, when the table/index is created. But I'm not sure how the locally managed tablespace work. Please do advice. Thank you very much in advance.
    I'm using Oracle 11g R2 (11.2.0.1.0) for Microsoft Windows (x64), running on Windows 7.
    For the purpose of reproducing this issue, I have created the tablespaces as follow:
    CREATE TABLESPACE CUST_DATA
    DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_DATA01.DBF' SIZE 512K
    AUTOEXTEND ON NEXT 256K MAXSIZE 2000K
    EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K
    SEGMENT SPACE MANAGEMENT AUTO;
    CREATE TABLESPACE CUST_INDX
    DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_INDX.DBF' SIZE 256K
    AUTOEXTEND ON NEXT 128K MAXSIZE 2000K
    EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128K
    SEGMENT SPACE MANAGEMENT AUTO;
    CREATE TABLE CUSTOMER_MASTER (CUST_ID VARCHAR2 (10),
    CUST_NAME VARCHAR2 (30),
    EMAIL VARCHAR2 (30),
    DOB DATE,
    ADD_TYPE CHAR (2) CONSTRAINT CK_ADD_TYPE CHECK (ADD_TYPE IN ('B1','B2','H1','H2')),
    CRE_USER VARCHAR2 (5) DEFAULT USER,
    CRE_TIME TIMESTAMP (3) DEFAULT SYSTIMESTAMP,
    MOD_USER VARCHAR2 (5),
    MOD_TIME TIMESTAMP (3),
    CONSTRAINT PK_CUSTOMER_MASTER PRIMARY KEY (CUST_ID) USING INDEX TABLESPACE CUST_INDX)
    TABLESPACE CUST_DATA;
    SQL> SELECT TABLE_NAME, TABLESPACE_NAME
    2 FROM USER_TABLES
    3 WHERE TABLE_NAME LIKE 'CUST%';
    TABLE_NAME TABLESPACE_NAME
    CUSTOMER_MASTER CUST_DATA
    SQL> SELECT INDEX_NAME, TABLESPACE_NAME
    2 FROM USER_INDEXES
    3 WHERE TABLE_NAME LIKE '%CUST%';
    INDEX_NAME TABLESPACE_NAME
    PK_CUSTOMER_MASTER CUST_INDX
    SQL> SELECT SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME, BYTES
    2 FROM USER_SEGMENTS;
    no rows selected

    Prior to 11g, when you created a table or whatever, you automatically allocated one extent.
    This is now no longer true and depends on a parameter I don't remember.
    dba_segments is a summary of dba_extents.
    Obviously, if there is no extent allocated, the table (view is defined with inner join) will not show up.
    You could qualify this is as a bug and submit a SR to Oracle. But then the performance impact may be huge.
    Sybrand Bakker
    Senior Oracle DBA

  • Newly Created Branches not showing up for Recruiter in the Requisition.

    Hi,
    We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
    Thanks.

    Hi,
    the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
    So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
    Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
    Kind regards
    Roman

  • Created column not showing in the Document Library View for a Custom Content Type based on Document

    We have a custom content type based of Document Content Type. The OOTB "Created" column does not show up in the view as well as in the Site Settings -> Columns.
    But it shows up in the Display Form and Edit Form of the Item at the bottom "Created at " by " " and "Modified by" at by ""
    Would anyone know how to make this column appear as part of the view ?
    thanks,
    Harsh

    Hi,
    They should by default be possible to add to a view. The only reason they would disappear from the UI if someone has changed the attribute of the Field to hidden = true. You can verify that with PowerShell and if so you can use PowerShell to revert the setting
    to false.
    $w = Get-SPWeb http://dev13$f = $w.Fields.GetFieldByInternalName("Created")$f.Hidden$f.Hidden = $false$f.Update()

  • Created playlist not showing up when iPhone is plugged in

    I'm using an iPhone 5s on iOS 8.1.2. I have created music playlists on my phone but when its plugged in they would not show up on the sidebar. My library shows up fine but when i try to look for my playlists they aren't there!!! Any help would me much appreciated.

    Hi Michelle-
    iTunes is not compatible with XP's Fast User Switching feature, which allows more than one person to be logged into the computer at the same time.
    You can disable this by going to Start/Control Panel/User Accounts then 'Change the way users log on and off' and remove the checkmark from Fast User Switching.

  • Designer 2013 - Design Manager: Page layout created is not showing up in Designer

    Hello everyone,
    I greatly need assistance. I have wasted over 1/2 a day trying to fix this issue.
    I have a site with a subsite. I'm customizing the subsite using the Design Manager. I've been through all of the steps and now I've created a Page Layout (step 6). I created the html and it generated the aspx. I have a drive mapped to the master page
    gallery. The files are showing up in the mapped drive. However, when I go into Designer 2013 and click Master Pages, the files aren't there. This happened to me last week and then suddenly, almost magically if you will, the files were there. This was after
    refreshing several times, closing Designer and opening it up. All the little tricks you have to use with Designer every now and then. So today I was repeating the process and the files aren't showing up again. I've been refreshing for 4 hours, closed Designer,
    even rebooted. To no avail. I disconnected the mapped drive and reconnected. Nothing.
    I have the correct permissions. I'm not only the site collection administrator but I'm also the SP Admin.
    Assistance would be greatly appreciated.
    Thanks,
    Lisa

    you have a subsite in a site collection •the publishing feature is activated in the subsite, but not in the site collection •you want to edit/add page layouts on the site collection level, to be used within your subsite •when you open the
    site collection in SharePoint Designer, you can't see Page Layouts in the Site Objects panel You now have 2 options: you can either activate the publishing feature in the site collection (and the Page Layouts link comes back), or you can use the All Files
    link and browse to the master pages and page layouts library (_catalogs > masterpage.) Either option will do, unless you really don't want the publishing feature in the site collection
    http://stackoverflow.com/questions/13303764/page-layouts-not-available-in-sharepoint-designer
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/864184b1-d8d0-448f-8d3b-667cb48fb75c/sharepoint-designer-not-showing-master-pages-or-page-layouts-in-site-objects?forum=sharepointadminprevious
    or
    go to Site Actions -> Site
    Settings in the upper left corner.
    Under "Site Collection Administration" click on "Site
    Collection Features".
    Look for "SharePoint Server Publishing Infrastructure" and
    activate it. It might take a moment to load.
    Next return to "Site Settings" and click on "Manage
    Site Features"
    Look for "SharePoint Server Publishing" and activate
    it. It might take a moment to load.
    http://stackoverflow.com/questions/12226856/im-missing-page-layout-button-on-sharepoint-2010-ribbon

  • Created Podcast Not showing up in Itunes Store...

    Hi Gang...I was wondering does anyone know y my created podcasts are not showing up in the itunes store...my rss feed has been validated and i am able myself to subscribe to it...but when i do a search it does not come up and doesnt show....also how can i find out if ppl have downloaded and listened to my show...my rss feed is jason1977.libsyn.com/rss

    When I first created my podcast, I noticed quite a bit of lag between the time my feed got accepted and the time when it would be found when i did a search on iTunes... I think it was like 2 days before a search on my name or the name of my podcast would bring up my feed.
    Give it a little while to all come together.
    R

Maybe you are looking for