Cummulated kpi which is created in BEX dssigner is not showing in WEBI Side

I am facing below issue
i have create one  kpi working capital commutative in Bex designer  which is cumulation  .its working fine
means result is coming cummulated in bi side. but in WEBI side above kpi is NOT Showing . Already I Have  allow external access to this query
Please advise me the above issue
Thanks
Nishant

Hi suman,
PFA attached screen shot and detail about above problem
In BEX designer side we create two KPI one is not cumulated and other one is Cumulated .but on WEBI  side ONLY ONE KPI Which is non cumulated in nature is showing and other one which is cumulated nature is not showing
For Ref purpose i have attached screen shoot
1) First pic show KPI Is  cumulated in nature
2) Second Pic KPI Is Non cumulated in nature
3) third pic show on Webi side on that side only comulative  KPI is shown

Similar Messages

  • Created by column value is not showing in XSLT List View After Migration To 2013

    Hello All,
    In my XSLT Created By Column value is not showing. Please help me with this problem. My code is simple I have custom column in XSLT name as 'Reported By' in which I want to show 'Created By' column value. but it is not showing. please help me with that.
    Thanks in advance

    hi
    is anyone has answer for this question.
    thanks...!!!!

  • Bex report does not show loaded data at once

    Hi experts,
    Why Bex report does not show loaded data at once after loading is finished but after some time?
    Could be the reason of it:
    a) huge amount of data in infocube.
    b) there are no deleting/creating indexes before/after loading, because it takes too much time
    c) anothe reason?
    Thank you,
    Tigr_Z

    Hi Tigr,
    A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
    C - it can be resource issue, so please look into all and double check with basis if thats the case.
    Regards
    Sunny

  • Why does Group created on Master console does not show any device count mapped on the managed Amp?

    Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
    A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
    Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console. 

    Laura Quitugua wrote:
    Hi,
    I have syced my outlook email with my iphone 4s and ipad.
    Note that only the email account info (username, login, server)  is sync'd.
    The actual emails are not sync'd.
    Opening an email on one device does nothing on teh other devices.

  • Notes created on iPhone or iPad not showing up in outlook

    I sync both my iPhone 5s and iPad Mini with Outlook 2007 on my computer.  The notes created on either the iPhone or iPad do not show up in Outlook, but the ones created on Outlook show up in both the iPhone and iPad.  The notes created on the iPhone do not show up on the iPad, and vice-versa.  I do not synce mail or notes with iCloud.

    More info on my problem:
    I tried to connect my camera directly via USB and it too will not show up in iPhoto. 
    Curiously, I can pull the SD card from the camera and stick it into the SD slot on my Mac Mini and it will then show up as a device in iPhoto.  So I can import everything from my camera's SD card.
    I tried importing into iPhoto from iPad, iPhoto, and camera onto my wife's iMac and everything works.
    So it's definitely something on my computer that is screwing up.
    Hope someone can help.....

  • How do I find duplicate songs which the latest itunes libary update does not show?

    How do you find duplicate songs in itunes which the latest updated version of itunes does not show, where the older version did?

    =Downgrading from iTunes 11 to iTunes 10.7=
    Try activating the sidebar, menu bar, and status bar and see if this is close enough to the previous version to make you content.  It is easier than downgrading and eventually you will be forced to run a newer iTunes unless you have an endless supply of the model computer you currently own.
    You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404).  Alternatively:
    Back up your computer first, in case the unexpected happens.
    Quit iTunes.
    Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at:  http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
    Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394.  Do steps 3 and 4.  Steps 6-8 may be also useful but I don't know if they are essential.  Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
    Replace the iTunes 11 application with iTunes 10.7.  Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved.  Two ways to do this are:
    1.  (Easier) Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
    2. (More work) Check this reference on how to delete the iTunes application itself:
        Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
        After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7.  I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
    AirTrafficHost.framework
    CoreFP.framework
    DeviceLink.framework
    iTunesAccess.framework
    MobileDevice.framework
    After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl"  and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since.  See:
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Other issues:
    - https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
    - If you encounter error -42408:
    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
    Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested).  A  variant of this is at: https://discussions.apple.com/message/20448184
    - Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

  • Creating a custom role does not show up whe creating a user

    On portal 10.1.4 I have followed the directions in 10.1.4 Oracle Server Portal Configuration Guide.section 6.1.6.9.1 Example: Defining a User Administrator Role.
    However, the newly created role does not show up when I create a new user.
    Any suggestions?

    This is a bug in 10.1.2.0.2. It works if you create the group from the directory page OID

  • Contacts created in Phone app do not show in the Contacts list.

    Hello,
    When I create a new contact from within the Phone app (i.e. from a "Recent" call) it does not show up in my contacts list. The new contact will show up in a search, but it only appears in the Phone app in the "Info" window. Any info. on why this happens and how I can correct it would be appreciated.
    Thanks,
    Greg

    I'm having the same problem....I think.
    1. I add a new contact to my iphone and it doesn't appear in the Contacts listing, but when I do a global search (slide left from the home screen) it appears.
    2. It's also not syncing to my pc.
    Did anyopne manage to get a resolution besides resetting all settings?

  • Premiere pro panel grid which was working on CC7.* does not show on CC 2014

    We are having a working Premiere pro CC 7.* version, which is loading our web page in an I frame to load the panel contents. But with the new Premiere pro CC 2014 the panel is not showing the webpage grids, button clicks are not working. Please help.. Thanks.

    Hi,
    These are the screen shots of my panel where i am listing some details in a grid,
    Actually this is a web page which is loaded inside the HTML5 premiere panel page index.html using an I frame.
    The web page is loading properly both in the old premiere pro cc 7.2.2 (33) and in web browsers.
    But inside the new Premiere pro CC 2014 its showing all kind of problems, like this one-- Not showing the grid.
    Please suggest..
    Also can somebody get me the link to download the old premiere pro cc 7 versions, not the updates; Currently all the links are pointing towards the new 2014 premiere pro.
    Thanks and Regards,
    Anoop NR

  • Transporting BEx objects: objects not showing in request

    I created a new request for Bex. but when i display the request in se10, i dont see the objects that I assigned to it. why is that

    First you need to make sure you have written all your objects in one request and assigned to a transportable development class/package. If the request you have created is a local change request (you can see this in SE10), then delete this request or if it's a transportable request (when you click on the request, properties, you see a target client) then you have already assigned your objects to a transportable package, you can release this and then have it imported into your target system.
    Alternatively you can delete your request(s), and then goto transport connector, accumulate the objects you need, when you scroll to the right you see a column by name "package", make sure you have the right package for all the objects (you can change the package name by right clicking and change the package) for all the objects and click on transport icon which will prompt you for a transport request or you can transport by using BEx transport (shiftctrl0). Hope it helps,
    Sree

  • Bex iView does not show changes made in web templates

    Hello,
    I have a Bex iView that presents a web template which is exposed in two portals.
    I made a certain change in the web template in portal A and I can see the change through the Bex iView in this portal.
    I than transfered the change to portal B and I can see this change at the Web application designer's code when it is connected to portal B.
    The problem is that I can't see the change through the Bex iView in portal B, it keeps presenting the old version of the web template. Also, if I preview it from WAD, which opens it in the portal, it shows the old version as well.
    <b>I've already tried/verified the following:</b>
    1. It's not a client related issue as it happens to all clients.
    2. I have tried clearing both the client and the portal's pcd caches.
    3. No cache whatsoever is configured in this iView's properties (Cache Level: None, Cache Validity Period: 0,0,0,-1, Allow Client-Side Caching: No).
    4. When I run the iView in debug mode in the application integrator I can't see anything unusual I can think of. Also, I can see there that it points to the correct web template.
    5. Retransported the web template from server A to server B.
    What else can be done here? Any ideas...?

    Hello,
    did you resolve your problem ?
    Best regards

  • Creating new ODBC connection does not show the tables

    Post Author: reemjacob
    CA Forum: Data Connectivity and SQL
    Hello
    I am creating a new ODBC Connection to SQL Server in Database Expert. Once I created the ODBC when I expand the Database I should be seeing the tables, views and stored procedures. But instead I am only seeing stored procedures. When I right click on the DB and go to options I see that Tables, Views and Stored Procedures are checked. How can I correct this so that I see the Tables and Views?
    Regards
    Reem

    Not an Oracle proble. Not an instant driver problem.
    If the ODBC tool and driver you use, fail to construct the proper SQL to interrogate the very rich Oracle data dictionary.. what is Oracle suppose to do? Fix the software from those vendors for the user? Not going to happen. Get Oracle Raptor instead and use a proper Oracle client.
    Simple test. Run the following SQLs via your ODBC connection.
    To see all your objects in your schema (i.e. the one you logged into via ODBC):
    SELECT * FROM user_objects
    To see a list of schemas:
    SELECT username FROM all_users ORDER BY 1
    To view other schemas' contents:
    SELECT * FROM all_objects
    Also note that historically ODBC has delivered poor performance. I recall many performance tests I've done during the 90's that showed ODBC up to 3x slower and generating more than 4x the network traffic, than native connections. Not too mention using ODBC introduces an additional software layer, which means more moving parts, more complexity, and more failures.
    I have not touched ODBC with the proverbial 10ft pole since - and today, I have even less need to use a clunky software layer like ODBC. And should I be forced to, it will be passthru all the way.

  • Lbuilder created characterset not showing in web runtime of 10g oracle form

    I have a case wherein database characterset is AR8ISO8859P6. Legacy system was form 3 application working from 7.3 database. In the legacy database there are some characters e.g. CHR(247) till CHR(250) which are being depicted as special character. Recently we migrated the database to 10g and forms to 10g Forms on Windows. On Windows we have set characterset as AR8MSWIN1256. Database characterset we still retained it to AR8ISO8859P6. The forms are showing all characters correctly except the 4 characters mentioned earlier i.e. CHR(247) to CHR(250) it all comes as reverse ?. Tried using lbuilder and define new characterset using AR8MSWIN1256 as the base characterset. After creating NLB files with the changes required, replaced NLS_LANG registry entry for AS to point to this new characterset still for the 4 characters the value is shown as reverse ?. Tried to change ReplaceCharacter in lbuilder to space character to make sure it works and used this new NLB this time instead of reverse ? it shows space for all 4 characters in SQLPlus what could be the problem
    Steps taken for nlb creation was
    1. Open existing object i.e. AR8MSWIN1256
    2. Modified characterset name and also character set ID as per oracle recommended standards
    3. Went into 'Character data' tab. For the 4 characters i.e. 0xF7 to 0xFA put glyph and specified unicode values \ufef5 for 0xF7.
    4. Went into classification tab and classified 4 characters as LETTER
    5. Generated NLB. Replaced boot and copied NLB to nls\data
    6 Modified NLS_LANG entry for the AS
    Problem still persists. Please give suggestion whether the creation and usage of NLB was correct. Since its 10g web based forms so the NLB files (boot lx1boot.nlb and newly created nlb) was placed in the AS's nls\data folder
    Edited by: user11977409 on Jan 17, 2011 4:17 AM

    The forum for Globalization Support (NLS) issues is:
    Globalization Support
    Database characterset we still retained it to AR8ISO8859P6Note that some of the characters from win-1256 and at least ten arabic letters are not defined in ISO 8859-6. http://en.wikipedia.org/wiki/ISO/IEC_8859-6 (- compare to http://msdn.microsoft.com/en-us/goglobal/cc305149)
    Likely you risk data loss by using this database character set (for Arabic windows clients).

  • Blue Ray disk created using premiere 10 does not show menus

    I have a video project with a main menu and  5 scene menus. I burn the project (using premiere Elements 10) to a Blue-ray disc using preset H.264 1920x1080i PAL Dolby  with quality option set to "Fit Contents to available space" . The software happily creates the disc with 17.6GB of data (main stream, 00000.m2ts is 18,413,568 KB (17.5GB) and 6 small streams for main & scene menus.
    However, when this disc is reinserted into the drive, it does not automatically start with the main menu.
    If I burn the same project to a DVD with PAL_Widescreen_DolbyDVD preset with quality option set to "Fit Contents to available space", it creates the DVD which, when reinserted into the drive, starts automatically with the main menu.
    The environment is Wndows 7  64bit with SONY BD RW BWU-500S ATA Device .
    What do I need to do to get the Blue Ray disc to start with the main menu?
    Killy

    Killy
    Thanks for the reply.
    Any day now I am intending to update the following blog post dealing with the type of computer Blu-ray playback situation that you are facing, but I have not gotten to it yet.
    Please review the blog post. It will give an idea of some of the issues involved.
    ATR Premiere Elements Troubleshooting: PE: Blu-ray Computer Playback and More
    Please look at the Media Player Classic HC x64.
    The VCL player description is for 2.0.8, 32 bit, the latest non beta version at the time (August 2013). But the principles should hold up in later versions of the VCL Player.
    I should have updates on my 2013 observations soon.
    ATR

  • Adding New Fields to a BEx Query does not show up in the CR field explorer

    This could be a silly question.
    I have a CR report based on a BEx query.  I had to add a couple of new fields to the BEx query, and when i want to add those fields to the CR report, I don't see them even after I do a refresh in the field explorer. 
    How do i see this new fields in the CR report?
    Help Please
    Thanks

    Hi,
    you can open the report and go to the menu Database > Verify Database.
    that should add the new fields to the list of fields in CR
    Ingo

Maybe you are looking for