LCM Import and Export Issue

Hi
I am trying to migrate a HPS application. But while exporting it i am getting the below eroors in LCM log file.
Application artifact listing metadata contains duplicate resource information for /Objects/Application Model.
Empty Zip input stream. Data not available to save.
error /Objects/Application Model - Artifact Exporter: Failed to export artifact.com.hyperion.pmd.hps.lcm.artifactExporter.LCMArtifactExportException: Failed to get export Objects.
I tried doing it through Utility.sh after saving the migration definition but getting the same error.
Any Suggestions on this.
Thank You
Regards
Sandeep Kumar Upadhyay

Hi Kyle
In my case .. i am trying to export Scorecard app .. and scorecard has got only two artifacts.. i had tried exporting them individually too.. but same error.. what i am confused with is .. it is not giving any issues to me on my DEV env.. I do not know if there is some issue related to env setup... As of now.. i do not have any ideas on how to troubleshoot this.. Any ideas on this are welcomed.
Thank you
Regards
Sandeep Kumar Upadhyay

Similar Messages

PLS-00753: malformed or corrupted wrapped unit; Import and Export issues

I'm new to oracle, please help me with below...
After a full import as follows:
imp username/password FILE=dump_file.dmp log=logFile.log ignore=y full=y &
I face two issues and they are:
1. I find that a partitioned table is missing. Verifying with the other team(who did the export), i found that they gave a full export. Hence shouldn't all objects of the user be exported?
What could be the reason for it?
2. Also there is package which is wrapped, and compiling it gives me this error-
PLS-00753: malformed or corrupted wrapped unit
How do i find the reason behind and rectify the same?
M using Oracle 10g.
Thanks in advance....
Edited by: Shruthi PR on Aug 31, 2012 12:08 AM

You can do one more thing if they're not willing to give you export logs/responding slowly.
You can use the option show=y which will show the structure of the objects in the data dump. But remember this will take time; If your dump is very huge, you have to think twice before using this option.
If you don't have metalink access, see the snap here
+*<Moderator edit - deleted contents of MOS Doc - pl do NOT post contents of MOS Docs - this is a violation of your Support agreement>*+

Issue while importing table from oracle to sql server using import and export wizard

Hi All,
I am trying to populate oracle table to sql server using import export wizard and i am getting the below error.the table is allready present in the database but still it throwing error like table doesn't exists.
Could not connect source component.
Error 0xc0202009: Source - JOB_ACTION_HISTORY [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error 0xc02020e8: Source - JOB_ACTION_HISTORY [1]: Opening a rowset for ""FLXUSER"."JOB_ACTION_HISTORY"" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
Kindly help me out
Thanks in advance

Hi Snehasis,
Please check whether the table name in the Oracle database has lower case letters. The table name should be exactly correct.
In addition, the issue might be related to the Oracle driver. What provider/driver do you use? If you use Microsoft OLE DB Provider for Oracle, you can try the
Oracle OLE DB Provider. If you use Enterprise or Developer edition of SSIS 2008 or higher, you can also try the
Microsoft Connectors for Oracle by Attunity. The Oracle OLE DB Provider and Microsoft Connectors for Oracle are proved to have better performance.
Regards,
Mike Yin
TechNet Community Support

SQL Server Import and Export Wizard Issue

i am trying to export SQL data into excel to send out weekly reports. I have created a view and a SQL account has access to this view; however, I am unable to successfully export the data. In preview I see all of the data yet it fails on the
Pre-execute with the below. It creates the excel file with just the header. I am using SQL 2014 and loaded the 64 bit AccessDatabaseengine. I am selecting excel 2007. Any ideas welcome.
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
(SQL Server Import and Export Wizard)
Error 0xc02020e8: Data Flow Task 1: Opening a rowset for "WeeklyList" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task 1: Destination - WeeklyList failed the pre-execute phase and returned error code 0xC02020E8.
(SQL Server Import and Export Wizard)

Hi astro,
Please ensure that you haven’t renamed or moved the destination excel file during the exporting process. Also make sure that “Create destination table” option is checked as below screenshot and the SQL statement is correct.
For more details about using SQL Server Import/Export Wizard to export data from a SQL Server database to an Excel spreadsheet, please review the below blog.
http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview

Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
Christoph

Hi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) *   ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha

Import and Export Option

When we exit from the local Developer Studio, in the next attempt to start the Developer studio we are not able to import/export the DC, because the import and export file system options are not available in the popup window.
To achieve it we are reinstalling the JDK as well as NWDS.
What could be the reason and please send the suggestions to resolve this issue.

Hi,
Close the project when exiting from the studio. So next time, you open studio, open the DC and check if you get the options.
Regards,
Harini S

Import and Export of R prediction model

hi ,
How can i import and export a oracle R prediction model   e.g from/to file ?   Basically,   We need it for the following requirements
1. We would like to ship a sample prediction model as part a product.      So, The product will work with sample prediction model for some time after install    till a newer model is created   with data in customer env.
2. Before regenerating a prediction model,   we would like to take a backup of the existing prediction model.   And if it turns out that the prediction results are not as good with new model, we should be able to reinstate the older model.
3. Support a mode where oracle R prediction model can be loaded to an environment which is different from the the source environment where the model was actually generated.
Please advise
Regards,
Arif

I tried the above method but i am facing an issue that although the prediction model is imported in to R using load command,   it is not loaded in ORE environment.     Due to this i am not able to use the imported predictionmodel for scoring
I tried the following
#Generate the prediction model
> PREDICTIONMODEL <- ore.odmKMeans(data= TEST_DATA_TABLE, formulat= COLUMN1 ~ . )
> class(PREDICTIONMODEL)
[1] "ore.odmKMeans" "ore.model"
> save( PREDICTIONMODEL, file="test.model")
After this i quit the R session (without saving my workspace)   and then   create a   new R session and tried the following
# load a prediction model from a file
> load(file="test.model")
> ls()
[1} "PREDICTIONMODEL"
> ore.ls()
charcter(0)
You can see from above that ore.ls() is not printing anything after load(). However, ls() prints the loaded PREDICTIONMODEL.    Now, if i try to do scoring against the loaded predictionmodel, I get an error
> x <- data.frame(COLUMN2="CC_PROCESSING", COLUMN3="CallWorkflow", COLUMN4="CallWorkflow", COLUMN1=NA)
> X <- ore.push(x)
>
> result<- ore.predict(PREDICTIONMODEL, X)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-40284: model does not exist
So, it seems that even though i imported the model from the file, ORE is still not aware of it .   Any idea about this ?

Import and Export Universe Restriction Sets

Hello Gurus,
We have a universe which has 100+ Restriction sets. We are in the process of migrating & testing BI4.0. As the developments are still going on in 3.1, Its getting difficult to manage the secuirty(Restriction sets) to deploy in multiple environments.(Restriction sets)
Is there a vb macro or pre-defined SDK to import and export the Universe Restriction sets from 3.1 Universe Designer to 4.0 Designer.
Thanks !!

Why cant use merge them using union/union all if intention is to get them to same sheet? Is it like the metadata is different so that they cant be merged to single sheet?
If that being the case you need to do it in two steps.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Import and Export MDL error with OWB Release 2

Getting the following error when importing and exporting MDL - any assist would be appreciated - never had this issue with previous releases - error as follows:
Error occurred exporting metadata to file "C:\TEMP\MY_PROJECT-20061208_1058.mdl".
java.lang.Exception: CNV0002-0038(ERROR): Cannot write to file ./../../reposasst/converter.properties. Please make sure that write privileges are enabled or that disk is not full.

I got the solution. OWB writes some temporary xml files before importing/exporting mdl and these files are stored in OWB home directory. The problem is write privileges on the OWB Home directory. I am not local admin of my system. Admin installed the OWB client on my system through his userid. Now if i try to create a directory or file in OWB home directory it thorws an error "Access Denied". I got the Admin rights on my local system for my userid and now OWB is working fine.
Thanks.

Is it possible to import and export Config Toll Configuration from one sys

Hi All,
Is it possible to import and export Config Toll Configuration from one system to Another system (QUS/PRD), for especific service.
Kindly let me know the pro and corn of it and step by step process
Thanks alot for your time.
Thanks
AB

Yes...It is certainly possible but then you would need to bring OS level j2ee filestructure as well and there are lots of changes at OS level in *.properties file and then at configtool level changes related to hostname, system numbers and port numbers etc.
This is not much difficult but not impossible also if you do it very carefully. Please note that SAP DOES NOT SUPPORT THIS METHOD.
alternatively, you can use sapinst to export-import j2ee filesystem from source to target which inturn would require to do configtool export/import and then changes at configtool level.
Do let us know your requirement so that we cud help you in case you are facing any issues.
cheers !!!
Ashish

SQL Server 2012: Import and Export Wizard - Exporting Multiple Result Sets at Once?

I'm working in SQL Server 2012 trying to export some data from our database into an Excel file. My SQL statement has two separate Select statements. They are not joined by a union. When I Execute them inside of SQL Server Management Studio, with Results
set to go to a Grid, I get two result sets back. Two full tables of data.
However, when I use the Import and Export Wizard, the Excel sheet only has the first set of data.
What do I need to do to have it so both result sets show up in the excel file?

Why cant use merge them using union/union all if intention is to get them to same sheet? Is it like the metadata is different so that they cant be merged to single sheet?
If that being the case you need to do it in two steps.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Error message using SQL import and Export Wizard with Excel spread sheet

I am trying to import an Excel spreadsheet using the Import export wizard that is provided with SQL 2014.
Everything seems to set up OK but then when I go to do the transfer "error message" comes up saying:
External Table is not in the expected format.(Microsoft Jet Database Engine).
This is a spreadsheet and there is no database, that is why I want to import it into a database!! So the reference to JET is a tad disappointing.
So why the error and how do I fix the problem?
As there are over 100 variables in the spread sheet rows, it would be great to have this automatically create the database and populate the fields.
I am using SQL 2014 Express and Office Excel 2013.
Thank you in advance for taking the time to read this, and hopefully sheading some light on the issue.

Hi AWlcurrent,
When import a .xlsx file to SQL Server using SQL Server Import and Export Wizard, you see a “External Table is not in the expected format.(Microsoft Jet Database Engine).” error message. This error message seems that the Microsoft JET Database Engine is
unable to handle something that is contained in the file.
So please make sure there is no unsupported content in the Excel file. Alternatively, we can use ‘Microsoft Excel’ as the Data Source, then Select ‘Microsoft Excel 2007’ as the Excel version to import the excel file.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

The Projects screen to import and export SAP xApp Manufacturing Integration

Hello:
On my SAP Discovery Server, On the Projects screen to import and export SAP xApp Manufacturing Integration and Intelligence (SAP xMII) projects.
Under the projects listed I see one Default project, is listed as a System Project.
I did an import and used one of the sample application, along with the ExportManifest.xml file.
"You can create an external project structure, include it in a zip file, and import it as a new project. You do not need an ExportManifest.xml file to import a project."
Now I see two projects listed as System Projects, is that ok, would that cause any issues? Is there any way that I could correct this?
Note:
If you import a project that already exists, the system overwrites the current project structure and files.
You can import hidden projects that do not appear on the Projects screen or in the SAP xMII Workbench. System-defined projects may appear in the Projects screen and in the SAP xMII Workbench, but you cannot delete them. You can import a project with the same name as a hidden or system-defined project and overwrite its properties. If you do this, they are no longer considered to be hidden or system-defined projects.
Thank you,

You could consider creating a project and exporting it to see the proper format of the zip file, including the ExportManifest. You should find attributes in the xml for setting the description, system type, etc.

No data source - OLE DB provider for ODBC is not shown in import and export wizard

Dear Sirs,
Would you please let me know how to activate the OLE DB provider for ODBC in import and export wizard?
Now I could use .NET framework for odbc only but it seems have problem in mapping table fields.
Please advise.
Thanks & Regards,
Clara

see this
http://msdn.microsoft.com/en-us/library/windows/desktop/ms712975(v=vs.85).aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

LCM Import and Export Issue

Similar Messages

Maybe you are looking for