Ld searches LD_LIBRARY_PATH before -L paths?

Trying to debug a link error. Debug trace seems to me to clearly say that paths in LD_LIBRARY_PATH are searched for libraries before paths specified with -L command line options. To my reading, this contradicts the documentation. Where am I going wrong?
There are other problems with this search path, but for now I'm concentrating on the search order issue. Edited trace follows. libfsu triggers the error.
Command line is
CC -g -o ipopt ampl_ipopt.o \
-xlic_lib=sunperf ./.libs/libamplinterface.a \
../../Interfaces/.libs/libipopt.a \
/cs/mitacs3/Coin-Ipopt-Sun/ThirdParty/ASL/amplsolver.a -ldl \
-L/net/local-rscn/Studio11/SUNWspro/lib/v8plus \
-L/net/local-rscn/Studio11/SUNWspro/prod/lib/v8plus \
-L/net/local-rscn/Studio11/SUNWspro/lib \
-L/net/local-rscn/Studio11/SUNWspro/prod/lib \
-L/usr/ccs/lib -L/lib -L/usr/lib \
-lfui -lfai -lfai2 -lfsumai -lfprodai -lfminlai -lfmaxlai \
-lfminvai -lfmaxvai -lfsu -lsunmath -lmtsk -lm
ld -V says Solaris Link Editors: 5.10-1.486
LD_LIBRARY_PATH is set to
/usr/local-rscn/SunStudio/SUNWspro/lib:/cs/mitacs1/lou/InstRoot/lib:/usr/dt/lib:/usr/openwin/lib:/usr/openwin/server/lib:/usr/lib:/usr/local/lib:/usr/ucblib:/usr/local/X11/lib:/cs/local2/Sybase/lib:/usr/sfw/lib:/opt/sfw/lib
ld tells me this:
debug: Library Search Paths (initial)
debug: /usr/local-rscn/SunStudio/SUNWspro/lib
debug: /cs/mitacs1/lou/InstRoot/lib
debug: /usr/dt/lib
debug: /usr/openwin/lib
debug: /usr/openwin/server/lib
debug: /usr/lib
debug: /usr/local/lib
debug: /usr/ucblib
debug: /usr/local/X11/lib
debug: /cs/local2/Sybase/lib
debug: /usr/sfw/lib
debug: /opt/sfw/lib
debug: /net/local-rscn/Studio11/SUNWspro/lib/rw7
debug: /net/local-rscn/Studio11/SUNWspro/lib/v8plus
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib/rw7
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib/v8plus
debug: /net/local-rscn/Studio11/SUNWspro/lib
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib
debug: /usr/ccs/lib
debug: /lib
debug: /usr/lib
debug: find lib=-lsunperf; path=/usr/local-rscn/SunStudio/SUNWspro/lib/libsunperf.so
debug: find lib=-lfui; path=/usr/local-rscn/SunStudio/SUNWspro/lib/libfui.so
debug: find lib=-lfsu; path=/usr/local-rscn/SunStudio/SUNWspro/lib/libfsu.so
<< much output elided >>
debug: Library Search Paths (-L updated)
debug: /net/local-rscn/Studio11/SUNWspro/lib/v8plus
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib/v8plus
debug: /net/local-rscn/Studio11/SUNWspro/lib
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib
debug: /usr/ccs/lib
debug: /lib
debug: /usr/lib
debug: /usr/local-rscn/SunStudio/SUNWspro/lib
debug: /cs/mitacs1/lou/InstRoot/lib
debug: /usr/dt/lib
debug: /usr/openwin/lib
debug: /usr/openwin/server/lib
debug: /usr/lib
debug: /usr/local/lib
debug: /usr/ucblib
debug: /usr/local/X11/lib
debug: /cs/local2/Sybase/lib
debug: /usr/sfw/lib
debug: /opt/sfw/lib
debug: /net/local-rscn/Studio11/SUNWspro/lib/rw7
debug: /net/local-rscn/Studio11/SUNWspro/lib/v8plus
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib/rw7
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib/v8plus
debug: /net/local-rscn/Studio11/SUNWspro/lib
debug: /net/local-rscn/Studio11/SUNWspro/prod/lib
debug: /usr/ccs/lib
debug: /lib
debug: /usr/lib
<< a bit more elided >>
debug: find lib=-lfsu; path=/net/local-rscn/Studio11/SUNWspro/lib/v8plus/libfsu.so
ld: fatal: recording name conflict: file `/usr/local-rscn/SunStudio/SUNWspro/lib/libfsu.so' and file `/net/local-rscn/Studio11/SUNWspro/lib/v8plus/libfsu.so' provide identical dependency names: libfsu.so.1 (possible multiple inclusion of the same file)
<< end trace >>
Seems to me that if -L paths were searched first, SUNWspro/lib/libfsu.so should not be found --- all occurrences should resolve to SUNWspro/lib/v8plus/libfsu.so.
Thanks, Lou

The ld man page is not clear about directory search order, but the Solaris LInker and Libraries Guide, chapter 2, is very clear: LD_LIBRARY_PATH is searched first.
http://docs.sun.com/app/docs/doc/817-1984/chapter2-2-sop?a=view
section "Using an Environment Variable"
But except for testing new libraries, you should avoid using LD_LIBRARY_PATH entirely, since better options are available for whatever purpose you had in mind.
Sometimes programmers resort to LD_LIBRARY_PATH in an effort to recover from having built a library or program incorrectly. The correct fix is to re-link the program or library with the right options.
For more on LD_LIBRARY_PATH, see Rod Evans' blog:
http://blogs.sun.com/rie/entry/tt_ld_library_path_tt

Similar Messages

Can you filter/search images before importing them?

Is there a way to filter images before importing them in Lightroom?
Scenario
I work with an extensive image collection stored on a server. The images contain a full set of metadata, including keywords and more. When I work on a specific project, I import the images into a Lightroom collection. That way I can easily review, rate and add additional keywords to those best-of images.
The challenge is that the images I want to add are from numerous folders. Plus, I often only want to add some images from those folders (not the entire folder). This collection process can be very time consuming -- manually locating the images and checking/unchecking the ones I want and repeating the process for the different folders the images reside in.
The process could be greatly simplified (and a lot faster) if I could filter/search for images that contain key words or other metadata to find the full set of images I want to import.
The key is that I’m not using a workflow to simply import all images from a memory card or download folder. I’m working from a large collection of existing images and want to import a subset of those images.
Thanks in advance.

No, you cannot filter or search images before importing them.
But immediatley after import the images are automatically displayed in <Previous Import>.
They will be displayed there until you import another set of images.
While displayed in <Previous Import> they can be searched and filtered.

Search help for filename+path

Hello,
When i need to get a file name and its path , i use the f.m. "WS_FILENAME_GET" that popup an explorer window.
I'm looking for a search help that do the same, so i can link it to a data element .
Thank you,
koby

Hi Keshav,
I built it!
I made a search help with function-exit.
How do i publish it as a wiki?
The function-exit is:
FUNCTION yf4if_shlp_exit_filepath.
""Local interface:
*" TABLES
*"      SHLP_TAB TYPE SHLP_DESCT
*"      RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*"     VALUE(SHLP) TYPE SHLP_DESCR
*"     VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
EXIT immediately, if you do not want to handle this step
IF callcontrol-step <> 'SELONE' AND
     callcontrol-step <> 'SELECT' AND
     " AND SO ON
     callcontrol-step <> 'DISP'.
    EXIT.
ENDIF.
STEP SELONE (Select one of the elementary searchhelps)
This step is only called for collective searchhelps. It may be used
to reduce the amount of elementary searchhelps given in SHLP_TAB.
The compound searchhelp is given in SHLP.
If you do not change CALLCONTROL-STEP, the next step is the
dialog, to select one of the elementary searchhelps.
If you want to skip this dialog, you have to return the selected
elementary searchhelp in SHLP and to change CALLCONTROL-STEP to
either to 'PRESEL' or to 'SELECT'.
IF callcontrol-step = 'SELONE'.
PERFORM SELONE .........
    EXIT.
ENDIF.
STEP PRESEL (Enter selection conditions)
This step allows you, to influence the selection conditions either
before they are displayed or in order to skip the dialog completely.
If you want to skip the dialog, you should change CALLCONTROL-STEP
to 'SELECT'.
Normaly only SHLP-SELOPT should be changed in this step.
IF callcontrol-step = 'PRESEL'.
PERFORM PRESEL ..........
    callcontrol-step = 'SELECT'.
    EXIT.
ENDIF.
STEP SELECT    (Select values)
This step may be used to overtake the data selection completely.
To skip the standard seletion, you should return 'DISP' as following
step in CALLCONTROL-STEP.
Normally RECORD_TAB should be filled after this step.
Standard function module F4UT_RESULTS_MAP may be very helpfull in this
step.
IF callcontrol-step = 'SELECT'.
    callcontrol-step = 'DISP'.
   EXIT. "Don't process STEP DISP additionally in this call.
ENDIF.
STEP DISP     (Display values)
This step is called, before the selected data is displayed.
You can e.g. modify or reduce the data in RECORD_TAB
according to the users authority.
If you want to get the standard display dialog afterwards, you
should not change CALLCONTROL-STEP.
If you want to overtake the dialog on you own, you must return
the following values in CALLCONTROL-STEP:
- "RETURN" if one line was selected. The selected line must be
the only record left in RECORD_TAB. The corresponding fields of
this line are entered into the screen.
- "EXIT" if the values request should be aborted
- "PRESEL" if you want to return to the selection dialog
Standard function modules F4UT_PARAMETER_VALUE_GET and
F4UT_PARAMETER_RESULTS_PUT may be very helpfull in this step.
IF callcontrol-step = 'DISP'.
PERFORM AUTHORITY_CHECK TABLES RECORD_TAB SHLP_TAB
                          CHANGING SHLP CALLCONTROL.
    TYPE-POOLS shlp.
    DATA : i_parameter TYPE     shlpfield,
           i_shlp_tab     TYPE      shlp_descr_tab_t ,
           i_record_tab     TYPE TABLE OF seahlpres WITH HEADER LINE   ,
           i_shlp     TYPE     TABLE OF shlp_descr_t WITH HEADER LINE,
    i_callcontrol     TYPE TABLE OF      ddshf4ctrl WITH HEADER LINE.
    DATA: gt_filetab TYPE filetable,
          gs_file TYPE file_table,
          gv_rc TYPE i.
    DATA : l_filename TYPE TABLE OF LINKLINE.
    CALL METHOD cl_gui_frontend_services=>file_open_dialog
      EXPORTING
        multiselection = space
      CHANGING
        file_table     = gt_filetab
        rc             = gv_rc.
    LOOP AT gt_filetab INTO gs_file.
    ENDLOOP.
    APPEND gs_file-filename TO l_filename.
    record_tab[] = l_filename[].
    CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
      EXPORTING
        parameter         = 'FILENAME'
      TABLES
        shlp_tab          = shlp_tab
        record_tab        = record_tab
      CHANGING
        shlp              = shlp
        callcontrol       = callcontrol
      EXCEPTIONS
        parameter_unknown = 1
        OTHERS            = 2.
    IF sy-subrc <> 0.
    ENDIF.
    callcontrol-step = 'RETURN'.
    EXIT.
ENDIF.
ENDFUNCTION.

Can I search the current set path in a script?

I have on my machine a folder full of mathscript commands and functions. This folder is beginning to get quite large and I'd like to be able to clean it up a bit by grouping the files into sub-folders.  For example, I'd like to create the following folders;
C:\MatrixXTools
C:\MatrixXTools\StringTools
C:\MatrixXTools\VariableTools
Of course, this would be fine if I was to set the path to every folder individually. What I want to do though, is to set my path manually to C:\MatrixXTools and then put a command in there called 'import'. The 'import' command would be responsible for searching the current path for a given folder and then adding it to the path when it finds it. So to import the StringTools, I would just call
import "StringTools"
All of my base scripts would go into C:/MatrixXTools and then if a script needed to use the StringTools, I could just call the import function.
The problem I have is that I can't find a command that will return me the path into a string vector. Is there some way of doing this? 'SHOW PATH' doesn't do what I want it to because it just shows the path and doesn't give me a way of programmatically viewing it.
Is there a better method of getting everything into sub-folders all together?
I realise that I could also do this using the startup script, however I have the tools in revision control (svn) so that other people can use them - I don't want to have to get everyone to change their startup script every time I make a new folder - I should be able to do this in the scripts.
Note: we are still on v62.2 and we are looking into upgrade options.
Solved!
Go to Solution.

You can get the show path output into a string using === operator.
   [showPathStr,] === show path;
You can break up the showPathStr on the new line characters
into a string vector using the split function.
The split function was added in MATRIXx 7.1.9. The split function internally
uses the index and stringex functions to create the split string vector.
   showPathVector = split(""n",showPathStr);
If you try out the split function and look at the algorithm you will need to
download and eval MATRIXx 7.1.9 or higher.
Also, instead of changing startup.ms everytime you add a tools directory, why not
have startup.ms execute another script (i.e. execute file = toolsetup.ms) and you
would only update toolsetup.ms when adding a new tools directory.

Validate search criteria before pressing Go button

Simple search panel .... PO# with lov and Receipt Number with lov .... search results in the bottom.
When user presses Go to search, is there a way to disallow partial values? In other words, before they hit Go, I would like to make sure that there's a valid PO or Receipt Number in the search panel so I don't get results for multiple PO's or receipts?
Thanks for any help.

LOV should do the validation that you are looking for , this is known as Autocompletion.
If you are typing some values in the LOV Input field and directly click on the button instead of tabbing out then this standard autocompletion feature cannot handle the case.
What you need to do to handle this is, enable validate-on-submit for the LOV.
Thanks
Tapash

Search results web part, path and query problem

Hi
I am updating a search web part and I want to show results from a specific site, I m using "path" to filter results, results are being returned correctly but now query I type in search is getting ignored. for example if I type "zxcvbn" I
still get all results from that specific site. If I remove "path" filter I see proper results.
Can I edit web part query to include "path" and "query" I type in search box?

Hi Shafaqat,
Thanks for sharing the solution which will benefit others who have the same issue.
Thanks
Daniel Yang
TechNet Community Support

How to search folder by folder path

As subject, how can I search a folder in content server using folder path?
Thanks

I agree, I don't believe it's possible out of the box.
However, I've leveraged a idocscript function that allows for this:
folderPath = m_service.getPageMerger().evaluateScript("<$getCollectionPathFromID(" + targetFolder + ")$>");
where targetFolder is the xCollectionID.
This still requires that you build a custom component, but the above is the easiest way to get the path from the id.
I understand that you want to do the opposite, but this should give you another option of where to look (i.e., idoc functions).
I would think that reverse engineering the standard search page would be a good place to start since the folder picker puts a folder path into the form. I would assume that somewhere in that process it gets rendered to an ID. I would try to find where that happens and leverage it as such.
Let me know if this helps at all!
-ryan

I had a Google search bar before now with Firefox 5 I have no search bar at all?

I have updated to Firefox 5 and now I have no search bar. I had Google before, but when I tried to download this it said it was not compatible with Firefox 5.
Now I have no search box.

I had this same problem, but you can add the search bar back by going to View > Toolbars > Customize... then somewhere near the bottom of the list of objects you'll find the Search bar that you can then drag onto the navigation bar where you would like it to go.

OT: Please search forum before asking questions (was:IMPORTANT FOR ALL !!!!)

i want to see a new question , all of your questions has a answers in the forum please searsh before you asking , Thanks

It is true that most people do not search the forum. They are usually concentrating on their problem and not realizing that most of the time someone had that problem before them and the question has been answered. Earlier, I had a post entitled "Most Asked Questions". Maybe we should have a FAQ blog or something to compile those questions again with some examples???

When I click on the + a new tab comes up, but no google search bar. I was able to get a new search bar before an upgrade.

To get a new search bar to come up I have to go to File, open a new window. If I select open a new tab, only a tab comes up, no search bar. I tried downloading current Firefox then reverted back to old ones trying to fix my problem.

If you reset Firefox then a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved to the desktop (Old Firefox Data).
You need to create a new profile if you really ant to get rid of all personal data and have a factory reset.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Inject BGP Default Routes into Multiple VRF before Best Path Selection

Hello,
I have the following setup:
Multiple Border Routers with eBGP sessions to external AS. We receive a default route from this multiple AS to keep the Table manageable. We noticed an important part of our traffic was been SW routed instead of CEF when we had the Full Internet table. Router Resources came to the ground when we changed to a default.
Now I want to separate this default routes into different VRF. Attached is the Diagram.
My question is, the multiple default route all go into the BGP Table. The BGP table then select the best route and place it on the RIB and then to the FIB.
I want to redistribute the different Route on the BGP table prior to the Best path selection algorithm and placed on the RIB.
How can I achieve this?

Hi,
Redistribution of multiple routes to same prefix is not possible. Even if you have configured BGP multipath and all different bgp routes got installed into routing table, during redistribution only route will be redistributed.
Also would like to understand the requirement of redistributing multiple BGP routes in to IGP. As per your diagram, 3 different eBGP sessions are on three different routers, so you can prefer eBGP route over iBGP received from other routers and can distribute eBGP route to IGP from each router. Thus you will have three different default routes in to IGP in core.
Please don't forget to rate this post if it has been helpful
- Akash

Jtree; searching node by inserting path name

Hello,
I have a jtree which allows me to explore my harddisk.
The thing I want is finding a directory by inserting a path name ( with a JTextfield).
I am already able to reveice the inserted path.
But how do I let the JTree go to that inserted path name?
For more information, just ask.
Grtz

well, if you have the node and are using DefaultTreeModel, you can call: getPathToRoot(TreeNode)
Not sure how to find the node from the value except to just loop thru the entire tree... or maintain a separate table of value/node objects.

Search doesn't show file path

When searching my HD, I cannot find the location of the files. I used to be able to hold the mouse over the file in the search box and it would show the location. How do I do this in Lion? It does find the file, but I would like to alos see where I put it! Call me old school! Thanks in advance for any help.

Sephecles wrote:
When searching my HD, I cannot find the location of the files. I used to be able to hold the mouse over the file in the search box and it would show the location. How do I do this in Lion? It does find the file, but I would like to alos see where I put it! Call me old school! Thanks in advance for any help.
What search modality? Are you talking about spotlight? If so when you hover over the ouput and the info box opens, hold the option-command key and the file path presents itself at the bootm of the pane.
If it is a search in Finder file path at the bottom of Finder window results.
In no search Finder window you can control click the title of the Finder Window for path or control-click the tool bar and drag the Path icon to the toolbar.
Also Finder>View>show path bar

Retrieving the Full Path of the Document / Folder in Search results

Hello,
We have a custom portlet to perform search in knowledge directory. We are able to retrieve the results from knowledge directory and would like to know on one enhancement feature.
Would like to know if it is possible to retrieve the directory structure / path of the document / folder. Something like "\Knowledge Directory\Customer Service\...." I have seen this path come up in search results when using Portal Admin. Not sure if it is available when using the idk.dll
Below is a sample code in C#. Would you know if there is a way I can retrieve the directory strcuture. If so, what method would give me that value? I tried GetURL, but that gives me the URL of the document http://portal/.....as compared to the path.
=====
using Plumtree.Remote.Portlet;
using Plumtree.Remote.PRC;
using Plumtree.Remote.PRC.Search;
//Establishing Session with Portal
IRemoteSession session = RemoteSessionFactory.GetExplicitLoginContext(new Uri(portletPortalAPIPref), username, password);
ISearchFactory searchFactory = session.GetSearchFactory();
searchRequest = searchFactory.CreatePortalSearchRequest();
searchRequest.SetQuery(txtSearchText.Text);
            //Setting up the Search Parameters – Objects to Search, Order By, Number of Results
ObjectClass[] objectTypes = { ObjectClass.Document, ObjectClass.DocumentFolder };
searchRequest.SetObjectTypesToSearch(objectTypes);
   searchRequest.SetResultsOrderBy(PlumtreeField.NAME);
   searchRequest.SetOrderAscending(true);
searchRequest.SetResultsCount(0, RecordCount);
//Executing the Search
searchResponse = searchRequest.Execute();
resultSet = searchResponse.GetResultSet();
//iterate through the results
IEnumerator resultsfolder = resultSet.GetResults();
while (resultsfolder.MoveNext())
                    IPortalSearchResult result = (IPortalSearchResult)resultsfolder.Current;
Convert.ToString(result.GetRank() + 1);
result.GetIconURL().ToString();
result.GetURL().ToString();
result.GetName().ToString();
result.GetExcerpt().ToString();
result.GetLastModified().ToString();
result.GetClassID().ToString();
result.GetObjectID().ToString();

Have you tried getting the extended data and the Parent Folder ID. (Plumtree.Remote.PRC.IExtendedData)
Using an additional object search to get the Path for the Parent Folder ID.
Here is a snippet that may help
Plumtree.Remote.PRC.IObjectManager objectManager = session.GetObjectManager(Plumtree.Remote.PRC.ObjectClass.<your class to return>);
Plumtree.Remote.PRC.IObjectQueryRow qResults = objectManager.QuerySingleObject(<id of object to return>);
if (qResults != null)
    Plumtree.Remote.PRC.IExtendedData ied = qResults.GetExtendedData();
    if (ied != null)
       sResult = ied.GetStringValue(<property you want to return>);

Google search displays strange characters before search, firefox 3.6.7, ubuntu 10.04

I get these strange characters when I go to Google search using Firefox 3.6.7 and Ubuntu 10.04.......see below
ᎢᏳᏍᏗ ᎨᏒ ᎣᏲᎲᎢᎠᏑᏰᏍᏗ ᏳᏍᏗ ᎠᏁᎵᏔᏅ (These characters are on the Google search page before I search and below search bar.
strange characters below:
ᎾᏍᎩᏯᎢ Directory ᏚᎾᏓᏡᎬ
What is going on....It reads OK using Chromium. I can't read anything. I am using Firefox 3.6.7. My View....character encoding is set to :
Western(ISO-8859-1) and auto detect "on"
== ?

Just to update this topic if anyone else has the issue. I've fixed it by manually amending the following setting in about:config -
Preference name: intl.accept_languages
Value: en-gb, en
If you're in the US you'd use ''en-us, en'' instead.
I then re-ran Firefox Sync and now on the Windows machines this value shows up as User Defined instead of default and this is now kept when syncing (I'm assuming the default values are not included when syncing preferences, for obvious reasons).

Ld searches LD_LIBRARY_PATH before -L paths?

Similar Messages

Maybe you are looking for