LDAP Filters - Valid Date Ranges By Server OS

Hello everyone,
I hope I'm dropping this in the correct place.. I've never posted here before. While querying Active Directory via LDAP I noticed a regression in behavior between Server 2008R2 and 2012R2 (possibly other versions) running
Directory Services.
The query I am attempting is (&(whenChanged>=19000101000000.0Z)(objectClass=person))
This previously worked in 2008R2 and would return everything matching objectClass=person in the org, on 2012R2 Domain Controller it would appear the lowest acceptable value is the year 1941.
I then decided to look for the cut off in 2008R2 and found that the year 1601 shows results 1600 does not.
This isn't a very big deal, we will just change our query, we perform the initial enumeration with the year 1900 and then move the watermark forward to the start time of the last enumeration.
I'm wondering if there is a known acceptable range per Server version for date filters and if this is going to continue to change as you release new versions of Windows Server.

Hey Andrew,
Thanks for your time. According to your post, it appears that you have already found the technical answer to the issue.
As for "if this is going to continue to change when releasing new versions of Windows server", I do not think we can have a answer at this moment, because whether it would be changed or not has not been decided yet (it happens in the future, right?).
What I can think of is, probably we can consider a "relatively safe range" in the query. Considering the age of Active Directory technology, what would be the most age entry that could possibly exist? We just need to cover that range and it would be fine.
As a summary, we cannot foresee what the future versions of Windows would behave at this moment, but we can think of a reasonable range that is relatively "safe".
Regards,
Bennie Chen

Similar Messages

  • Mailbox Export - Filtered for Date Range and Body Content

    I have been pulling my hair out with this one and hopefully someone can help.
    I need to search a mailbox and export all (sent & received) messages that fit in a date range and also have a specific word in the body. The query I am using doesn't seem to find the term at all, but the messages it does find fit within my date range,
    so part of it seems to work. The request was to not use wildcards too, only looking for the specific word in the body. Here is my one-liner...
    New-MailboxExportRequest -ContentFilter {(Body -like "Something") -and (Received -gt "07/01/2012") -and (Received -lt "07/31/2012") -or (Sent -gt "07/01/2012") -and (Sent -lt "07/31/2012")} -Mailbox "SearchMailbox"
    -Name "Label1" -FilePath \\server\temp\pst\Export.pst
    I've also tried to search for a common word like "the" just to make sure it wasn't a case of the term simply not being in mailbox. No dice.

    Hi,
    Agree with Nickeyclayton, you can use (body -like "*something*") instead of (body -like "something").
    I recommend you refer to the following article:
    Filterable Properties for the -ContentFilter Parameter
    Property
    Description
    Values
    Example syntax
    Body
    This   property returns messages that have the specified string within the message   body.
    String
    Wildcard
    -ContentFilter {Body -like   "*prospectus*"}
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Validity & Number range for permits

    Hi,
    Can we map validity for permits in SAP PM permit standard functionality. I was advised for WCM however that seems a complex system as per our requirement.
    Validity of permits, auto permit number assignment while assigning permit is the requirement.
    Any inputs?
    Regards

    Hope you have gone through that blog.
    Permits are approvals which will be created as one time master data & the same can be used for many orders.
    So, it doesn't have any number range. Also, this master data is very limited.
    You can't set the validity date range for permit, I feel.
    Instead, in IPMD, you can sen Usage Block that will avoid the usage of that specific permit further.
    Suggest you to read some documents & links on permits to understand the concept.
    You can get the links in google.

  • Date range validity evaluation in BRM table

    Lectori salutem, Gurus salutem,
    I'm using 7.3 sp03. I would like to achieve the following with BRM (bit simplified):
    a parameter, ABC, is passed to a ruleSetService, and needs to be evaluated.
    The table is as follows:
    ABC startDate endDate Value
    1 01-01-2011 31-12-2011 A
    1 01-01-2012 31-12-2012 B
    2 01-01-2011 31-12-2011 X
    4 01-01-2012 31-12-2012 Y
    When ABC-value '1' is passed to the ruleSetService in the table the first row needs to be selected. CurrentDate (24-11-2011) is in between 01-01-2011 and 31-12-2011, making this the valid row. The value that should be returned is A.
    Beginning of next year it should change to B.
    How should I set this up in BRM?
    Thanks in advance!
    Martijn.

    Hi Martijn,
    Appreciate that you've simplifiied the scenario... but do you have any idea how many of these entries you are likely to have in total as that may change the answer.
    You have a couple of choices that might work here...
    1. You could a decision table... to hold your values (i.e. ABC and date range as conditions, value as action) and use the rule that evaluates the decision table to pick up the current date for the comparison. e.g.  date conditions would be "greater than than 01-01-2011", "less than 31-12-2011", etc.
    2. Alternatively, if the plan is to have a simple end of year change over,  you could use Effectivities (in the Project Resources of the rules project) to determine which values  are selected and use a decision table or even just a rule script to determine the value.
    But the thing is... HOW you organise your rule is going to depend a lot on:
    a) How many entries in total do you expect
    b) Is there a nice neat cutover of all ABC values at the same time or do effective date ranges vary a lot between different ABC values
    c) Who's responsible for maintaining these and if multiiple people are responsible do you need to organise your rule to cater for that? E.g. Are different people responsible for different ABC entries
    Does that help at all?
    Regards,
    Jocelyn

  • Filtering by date or date range by using FilterCriteria on a Table

    I am able to use the built-in feature of Table to filter the rows based on a text field (i.e display only those rows that has a certain value of a text field). Here is an example code:
                CompareFilterCriteria criteria1 = new CompareFilterCriteria(new FieldKey("user_lname"), "Test ");
                FilterCriteria fCreteria[] = new FilterCriteria[1];
                fCreteria[0] = criteria1;
                getTableRowGroup1().getTableDataFilter().setFilterCriteria(fCreteria);This works. Now I need to figure out how to filter based on a date field. I want to be able to filter if date value is before/after a date or between a date range. I was wondering if I could use RegexFilterCriteria for this.
    Any pointers, code, examples are highly appreciated. There is very little documentation on filtering in JSC.
    Thanks

    Thats my fall back in case if I can't use the built-in filtering. Table component has all the filtering built into it. I believe, this is faster too, as its cached vs. executing SQL every time user searches for some records.
    Creator Team: I have noticed a lot of people using SQL when they could have used Filters -- because no one know how to use it. No documentation on it, except API doc, which is lacking in explanation.
    When you have put all this hard work developing it, why not put a little more in documenting it with examples/codes/tutorials?
    Message was edited by:
    Sabir

  • Date range selection from session/server variables - possible solution

    I've recently been creating some reports who'se selection is based on the contents of a session variable, using this against a date field. Thought I'd share with everyone how I did it.
    1/ Create a server/static variable called DATE_FORMAT who'se contents are 'dd/mm/yy' . Note, should include the single quotes.
    2/ Create 2 session variables that represent the beginning/end date range for your selection you are after - in my case, it was the first & last date of the previous month, PREVIOUS_PERIOD_FROM and PREVIOUS_PERIOD_TO
    3/ In the selection, add a filter on the date field in question, set the Operator as "is between".
    4/ for each of the 2 valaues, select Add->SQL expression and enter:
    EVALUATE('TO_DATE(%1,%2)',VALUEOF(NQ_SESSION."PREVIOUS_PERIOD_FROM"),VALUEOF("DATE_FORMAT"))
    and
    EVALUATE('TO_DATE(%1,%2)',VALUEOF(NQ_SESSION."PREVIOUS_PERIOD_TO"),VALUEOF("DATE_FORMAT"))

    HI,
           U can check the Select Quert by using IN s_option.
    Like eg:--
        Select * form Zemp where empno in s_empno.
    Hope this example will help u...
    here Zemp is a table...... empno is a field     s_empno is a Select-option.
    Thanks and rEgards
    Suraj S Nair

  • User-filtered report based on date range

    I am struggling with trying to implement a basic search that includes an optional date range for the data. The form looks the way I want it, but I can't seem to get the right syntax in the query. I can't get anything other than "no rows" to show up in the query if I implement a clause selecting records based on the time.
    Here is a working query (without the time):
    select m.AUDIT_ID, m.TIMESTAMP, m.LOC_ID, a.AREA, s.SUBAREA, d.OBSERVATIONS
    from transys.SAFETY_AUDIT_MAIN m, transys.SAFETY_AUDIT_DETAIL d,
    transys.SAFETY_AUDIT_AREA a, transys.SAFETY_AUDIT_SUBAREA s
    where m.AUDIT_ID = d.AUDIT_ID (+)
    and d.AREA_ID = a.AREA_ID
    and d.SUBAREA_ID = s.SUBAREA_ID
    and s.SUBAREA_ID NOT IN (198,199,398,399,498,499,798,799,898,899,999)
    and (instr(upper(a.AREA),upper(nvl(:P210_SEARCH,AREA))) > 0
    or instr(upper(s.SUBAREA),upper(nvl(:P210_SEARCH,SUBAREA))) > 0
    or instr(upper(d.OBSERVATIONS),upper(nvl(:P210_SEARCH,OBSERVATIONS))) > 0)
    I want to compare the m.TIMESTAMP column with page items P210_FROM_DATE and P210_TO_DATE.
    I would also like to add in an optional filter comparing m.LOC_ID to P210_LOCATION, and I can't seem to figure out the "optional" part.
    Any ideas would be helpful.

    The query as I posted it returns 3 values, but it is not syntactically identical to the one APEX is using. I would be happy to get 3 rows in APEX because at least that way I would know I have the date formatting correct, and just needed to tweak the logic. When I execute the query in APEX, however, I get either "there is no data to display" or I get a formatting error - "X is not a valid month" - depending on how I use TO_CHAR and TO_DATE to try and synchronize the various date inputs with the field.
    If it is a query issue (which it may be), I am still suspecting that it is something to do with the formatting of the dates involved. Just as in APEX, it could be something simple, but I suspect it is a mismatch in the formatting somewhere.
    Maybe I'll try making a view of the underlying table and experimenting with the date in the view. That should enable me to see if it is the formatting in the query or the formatting in APEX that is causing the problem. Or it could even eliminate formatting as the problem as well.
    PS. I had a similar struggle trying to implement some triggers against this database that used date values. NLS_TIMESTAMP_FORMAT is set to 'YYYY-MM-DD HH24.MI.SS.FF'. I ended up converting every date that I pulled from the database into a known format with TO_CHAR and then converting it back into a date with TO_DATE. It was the only way to be able to compare the date values without getting these same kinds of errors.

  • Moving multiple files by date range and/or file name filtered

    I need to move multiple files by date range and/or by filename (using a filter) to another directory. 
    OR
    How can I get the attributes of files in a directory, something you would see when typing in "dir" in a DOS or ls in UNIX.  I can parse this info and then make a array of files to move.
    The reason for needing this is that I need to move files that are located in another country, and sort them into different directories based on date.  Having to read each file for it's file information adds wasted time that I can't afford.  I am about to create a dos terminal to do a "dir" command to get the information and parse it out.. but I was hoping LV had a function that can get me that info so I don't have build it.
    THanks.

    You should use the 'File/Directory Info' functionality.
    This will return the last modificatoin of the file.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Date range validation

    I have a requirement where i have to check date range in select option and if its more than 45days the I have to give an Informatory message and exit the programme , How can I do that ??
    Urgent Plzz..

    Hi,
      try this code...
    TABLES: zpr_prog_item.
    DATA: cnt TYPE i.
    SELECT-OPTIONS date FOR zpr_prog_item-date_shoot.
    CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
      EXPORTING
        i_datum_bis                   = date-high
        i_datum_von                   = date-low
    IMPORTING
       e_tage                        = cnt
    EXCEPTIONS
       DAYS_METHOD_NOT_DEFINED       = 1
       OTHERS                        = 2.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
      IF cnt < 45.
        LEAVE TO LIST-PROCESSING.
        WRITE:/ date-low,
              / date-high,
              / cnt.
      ELSE.
        MESSAGE i000(zsam).
        LEAVE SCREEN.
      ENDIF.
    regards,
    Bhuvana.

  • Date Range valid check on BSP Application

    Hallo,
    i want to  display brochures with its validity date in BSP application.Can anybody help me. i was rejected because i posted my code here ,i cant post it again.
    regards

    hi,
    In which block  you want to keep the validation . In Layout of in Onevent processing block. ??
    <script for="sd" event=onchange type="text/javascript">
    var data = this.value;
    var date = data.split(".");
    if (data != ' ')
    var day = date[0];
    var month = date[1];
    var year = date[2];
    if ((day<1 || day >31) || (month<1 || month>12) ||(year.length != 4))
    alert("Please enter a valid  Date ( mm.dd.yyyy )");
    endif.
    hw come ur post  got reject ?
    Please specify whr u want to embed validation .

  • Finding the last valid value in a date range

    The data I am working with represent readings from different instruments. One field keeps track of a running summation so this number is steadily increasing. I need to look at the data for a given date, however the problem is that sometimes the instrument is turned off. In this case there would be no data for that date, however since all I am interested is the sum total for the signal on that instrument, I need to keep going back until I find the last valid data in the database which would represent the sum up to this point. How can I design a query or procedure that would handle this contingency? Here is some sample data:
    PV_ID                  SMPL_DTE                  INTEG_SINCE_VAL
    271                    20-JUL-08 12.05.00 AM     6172.0387459767
    271                    20-JUL-08 12.06.00 AM     6172.0387459767
    271                    21-JUL-08 12.05.00 AM     6172.0387459767
    271                    21-JUL-08 12.06.00 AM     6172.0387459767
    271                    21-JUL-08 08.43.00 AM     6172.0387459767
    271                    21-JUL-08 08.45.00 AM     6172.0387459767
    271                    22-JUL-08 12.05.00 AM     6172.0387459767
    271                    12-AUG-08 04.45.00 PM     6172.0387459767
    271                    12-AUG-08 04.50.00 PM     6172.038748687284 So if for instance I ran a query for July 30th, I'd need to actually get the result from July 22nd since it is the last valid number. PV_ID represents the instrument ID and INTEG_SINCE_VAL is the accumulated total for signal readings on that instrument.
    Edited by: Solerous on Mar 16, 2009 7:23 AM
    Edited by: Solerous on Mar 16, 2009 7:25 AM

    Hi,
    Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
    Connected as hr
    SQL>
    SQL> SELECT *
      2  FROM   (WITH data AS (SELECT 271 AS PV_ID,
      3                               (SYSDATE - 5) AS SMPL_DTE,
      4                               23 AS INTEG_SINCE_VAL
      5                        FROM   dual
      6                        UNION ALL
      7                        SELECT 271 AS PV_ID,
      8                               (SYSDATE - 4) AS SMPL_DTE,
      9                               40 AS INTEG_SINCE_VAL
    10                        FROM   dual
    11                        UNION ALL
    12                        SELECT 271 AS PV_ID,
    13                               (SYSDATE - 1) AS SMPL_DTE,
    14                               50 AS INTEG_SINCE_VAL
    15                        FROM   dual)
    16             SELECT data.*,
    17                    rownum
    18             FROM   data
    19             WHERE  PV_ID = 271
    20             AND    SMPL_DTE <= SYSDATE -- your date goes here
    21             ORDER  BY smpl_dte DESC)
    22             WHERE  rownum = 1;
         PV_ID SMPL_DTE    INTEG_SINCE_VAL     ROWNUM
           271 3/15/2009 1              50          3
    SQL> Regards,

  • Date Range as Parameter

    Hi ,
             I have a column with date range in the format 07/21/2014-07/21/2014,
            07/16/2014-07/16/2014
           07/22/2014-07/22/2014
    there will be thousands of records like this.
    In ssrs I need to pass a pramater with date range =07/16/2014-07/22/2014 then it should display all the records between those dates. I not getting the logic here how to write it.  it is pulling all the dates it is not filtering the dates right now.
    Can anybody help me on this issue..
    BALUSUSRIHARSHA

    It will be much easier if you have two columns holding the range and you pass two parameters to find out the overlapping ranges.
    select c1, ..., cn
    from T
    where @sdt <= dt2 and @edt >= dt1; -- considering the range (dt1, dt2)
    or just the exact range:
    select c1, ..., cn
    from T
    where dt1 = @sdt and dt2 = @edt; -- considering the range (dt1, dt2)
    Since you store the range in one column of character data type then you need to split the value in two, the start and end points of the range, and do the same with the parameter but this will be easier to change the report to send two parameters instead
    one.
    Search in this forum or Transact-SQL forum for a function to split a string. Here is a good reference:
    Arrays and Lists in SQL Server
    http://www.sommarskog.se/arrays-in-sql.html
    Once you have created the function, it is a matter of using the APPLY operator, pivot the range and use same predicate as in my first query.
    Here is an example but I would encorage you to change the model.
    SET NOCOUNT ON;
    USE tempdb;
    GO
    --Itzik's VATN
    CREATE FUNCTION dbo.GetNums(@n AS BIGINT) RETURNS TABLE
    AS
    RETURN
    WITH
    L0 AS(SELECT 1 AS c UNION ALL SELECT 1),
    L1 AS(SELECT 1 AS c FROM L0 AS A CROSS JOIN L0 AS B),
    L2 AS(SELECT 1 AS c FROM L1 AS A CROSS JOIN L1 AS B),
    L3 AS(SELECT 1 AS c FROM L2 AS A CROSS JOIN L2 AS B),
    L4 AS(SELECT 1 AS c FROM L3 AS A CROSS JOIN L3 AS B),
    L5 AS(SELECT 1 AS c FROM L4 AS A CROSS JOIN L4 AS B),
    Nums AS(SELECT ROW_NUMBER() OVER(ORDER BY (SELECT NULL)) AS n FROM L5)
    SELECT TOP (@n) n FROM Nums ORDER BY n;
    GO
    --Erland's split_me
    CREATE FUNCTION dbo.inline_split_me(@param nvarchar(MAX))
    RETURNS TABLE AS
    RETURN(
    SELECT
    ROW_NUMBER() OVER(ORDER BY n) AS rn,
    LTRIM(rtrim(convert(nvarchar(4000),
    substring(@param, n,
    charindex(N'-' COLLATE Slovenian_BIN2,
    @param + convert(nvarchar(MAX), N'-'),
    n) - n)
    ))) AS Value
    FROM dbo.GetNums(LEN(@param))
    WHERE substring(convert(nvarchar(MAX), N'-') + @param, n, 1) = N'-' COLLATE Slovenian_BIN2
    GO
    DECLARE @r varchar(21) = '07/16/2014-07/22/2014';
    DECLARE @T TABLE (dt_range varchar(21));
    INSERT INTO @T (dt_range)
    VALUES
    ('07/21/2014-07/21/2014'),
    ('07/16/2014-07/16/2014'),
    ('07/22/2014-07/22/2014'),
    ('07/23/2014-07/25/2014');
    SELECT
    T.dt_range,
    R.sdt,
    R.edt,
    W.p_sdt,
    W.p_edt
    FROM
    @T AS T
    CROSS APPLY
    SELECT
    CAST([1] AS date) AS sdt,
    CAST([2] AS date) AS edt
    FROM
    dbo.inline_split_me(T.dt_range) AS A
    PIVOT
    MAX(Value)
    FOR rn IN ([1], [2])
    ) AS P
    ) AS R
    CROSS JOIN
    SELECT
    CAST([1] AS date) AS p_sdt,
    CAST([2] AS date) AS p_edt
    FROM
    dbo.inline_split_me(@r) AS A
    PIVOT
    MAX(Value)
    FOR rn IN ([1], [2])
    ) AS P
    ) AS W
    WHERE
    R.sdt <= W.p_edt
    AND R.edt >= W.p_sdt;
    GO
    DROP FUNCTION dbo.inline_split_me, dbo.GetNums;
    GO
    Notice that the last row inserted is not part of the result set because it falls outside of the parameter date range.
    AMB
    Some guidelines for posting questions...

  • Is sql server using trigger to capture change data in SQL server CDC?

    hi all,
    what is the Architecture of SQL server change data capture(CDC)? is sql server using trigger to capture change data in SQL server CDC? for example Change Data Capture (CDC) in SQL Server 2008 using we can capture change Data records INSERTs, UPDATEs, and
    DELETEs applied to SQL Server tables.so my question is SQL server using triggers to capture change data like INSERT TRIGGER, UPDATE TRIGGER and DELETED TRIGGER using each tables after enabled CDC...?
    Thanks
    Tharindu Dhaneenja 
    Tharindu Dhaneenja http://dhaneenja.blogspot.com

    It is not using triggers. The source is the transaction log.
    Related link:
    Basics of Change Data Capture
    ...The source of change data for change data capture is the SQL Server transaction log. As inserts, updates, and deletes are applied to tracked source tables, entries that describe those
    changes are added to the log. The log serves as input to the change data capture capture process. This reads the log and adds information about changes to the tracked table’s associated change table. Functions are provided to enumerate
    the changes that appear in the change tables over a specified range, returning the information in the form of a filtered result set. The filtered result set is typically used by an application process to update a representation of the source in some external
    environment. ...
    Kalman Toth, SQL Server & Business Intelligence Training; SQL Server 2008 Training

  • How to export user using date range

    Hia , i am using Oracle10g my object to export user (pibs) all tables in pibs have
    created_date column
    i wan to export user pibs using date range created_date between 01-jan-07 and 05-jan-07
    pls help me

    Check out the QUERY clause.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#CEGFIAGE
    If you're using Datapump, check out Filtering during export operations.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#g1022624

  • Query for all open sales order with a date range

    Hi Experts!
    I wrote this query that will look up all open sales order of a particular customer and how much was served:
    SELECT T0.[DocNum] 'OS #', T0.[DocDate] 'Posting Date', T0.[CardName] 'Customer',  T1.[Dscription] 'Item Description',T4.[SalUnitMsr] 'Sales UOM', T4.[InvntryUom] 'Invty UOM', T1.[UseBaseUn] 'Use of Invty UOM' , T1.[Quantity], T1.[Quantity]-T1.[OpenQty] 'Served Qty', T1.[OpenQty] 'Unserved Qty' FROM ORDR T0  INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.[DocStatus] = 'O' and T0.[CardName] =[%0]
    However, I don't know how to input a parameter for the date range in a query.  Can anyone help with this issue?
    Your input will be highly appreciated.
    Warm regards,
    Jen

    Hiiiiiii
             Try This.....
    SELECT T0.DocNum 'OS #', T0.DocDate 'Posting Date', T0.CardName 'Customer', T1.Dscription 'Item Description',T4.SalUnitMsr 'Sales UOM', T4.InvntryUom 'Invty UOM', T1.UseBaseUn 'Use of Invty UOM' , T1.Quantity, T1.Quantity, T1.OpenQty 'Served Qty', T1.OpenQty 'Unserved Qty' FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.DocStatus = 'O' and T0.CardName ='[%0]' and (T0.DocDate>='[%1]' and T0.DocDate<='[%2]')
    Regards,

Maybe you are looking for