Leads and its associations with Custom Objects 4-15

I have been trying to create a Real time report with Lead associating with Custom Objects 3 and 5. But the report does not show up any data. I know that we cannot associate Custom objects 1,2 and 3 with Lead. I wanted to know if we can associate Lead with Custom Objects 4-15 or not ?

Yes. You have to define them in CO5 Layout.
You should see Name, Contact and Custom Object 04 (you may have renamed it). Not the Id field.
Then when you add THE CO5 layout to Contact Related section, you can add new association between Contact and CO4.
Don't forgot to enable the Access Profiles in Contact, CO4 and CO5.

Similar Messages

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Changing my Apple ID and its associated email address

For the past 6 years or so I have used the same Apple ID and email. It started out as an Aol account and is now my [email protected] as my Apple ID. I want to change my Apple ID and its associated email account to Gmail since that is what I use more often now. I see the option to change Email Address has next to it "This will be your new Apple ID", which is exactly what I want to do. I have two questions:
1) I will change the Email Address field to my Gmail address. Will this create any sort of confusion with the DRMed songs and videos I purchased in the past?
2) For posting on these discussion boards I have yet another Apple ID (created kind of by mistake, a long story). Is there any way I can merge the two?

I attempted to do the the same (similar) thing yesterday (Sept 2nd, 2010).
I wanted to change my current Apple ID used for iTunes Store (which was created years ago when I bought my wife an iPod) to be my Apple ID (created when I joined the Apple Developer program way before iTunes).
After changing the information and clicking the "Done" button, I received an error message that was positioned on the "Apple ID" box, which stated "this is not a valid email address". I assumed that the "email pattern filter" was erroneously attached to the Apple ID input box, so I contacted iTunes Store Customer Support.
*iTunes Store Customer Support response:*
+I'm very sorry for the inconvenience, since "<my.user.name>" is already an Apple ID it cannot be used for another iTunes account. At this point, it can only become it's own iTunes account.+
I'm posting my followup question below, in case anyone on the forum has these same questions or has any experience with actually doing what Apple proposed - create a new account to be used with an existing iTunes Library - and has any experiences they might wish to share.
*My followup question to iTunes Store Customer Support (waiting for reply):*
So, what are the implications of creating a new (second) iTunes account?
- Will I keep my same iTunes Library (i.e. Will all previous items be visible, when using the new account to purchase items)?
- How will this affect devices (iPhone, iPod) that are synched to the current iTunes Library?
So, I guess what I'm asking is; "How tightly coupled is the iTunes "account" information bound to the Library"?
I don't want to create a situation where:
- My iPhone and Apps gets wiped out when I sync because it sees a different "account name".
- My Library looks like I have "zero" items (Music/Videos/Playlist) because I've logged into iTunes with a different "account name"
I'm attempting to only change the iTunes Apple ID and email associated with the account for purchasing items through the iTunes Store. I want to preserve all other aspects of the current set up.
Is this possible?

Can an email address be a member of an LDAP group even if it isn't associated with an object in the Directory Server?

Can an email address be a member of an LDAP group even if it isn't
associated with an object in the Directory Server?
<P>
General members of a group are the members defined in the
Directory Server. They are full-fledged members of the group who
may have a set of permissions associated with their membership,
a title, or other attributes. Mail-specific users are users who
are not full-fledged members of the group, but who receive mail
sent to the group. Mail-specific users need not be identified as
a user in the Directory Server--an email address is sufficient.
An example of this is a group of salespeople, all of whom are in
the group "North American Sales Team." They have access to a
sales-tracking database, on-line quota information, and
competitive information. The mail-specific users of this group
are the admins who support the members of the sales team, who need
to get the mail that goes out to the group, but don't need access
to the applications and information that the salespeople do.

Hey EllyK,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest performing this workaround and then try to login to BlackBerry Link:
Open BlackBerry World on the BlackBerry smartphone and sign in using the BlackBerry ID.
Connect the BlackBerry 10 smartphone to the computer.
Open BlackBerry Link
Sign in using the BlackBerry ID.
Let me know if the issue still persists.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services

Getting this error from DirSync
Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [UserPrincipalName
[email protected];]. Correct or remove the duplicate values in your local directory. Please refer to
http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute values.
Quick eyeball and couldn't see the cause in the user account so used the script here:
http://gallery.technet.microsoft.com/office/Fix-Duplicate-User-d92215ef
And got these outputs:
PS C:\Windows\System32\WindowsPowerShell\v1.0> Export-OSCADUserPrincipalName -UserPrincipalName "[email protected]" -Path .\outputs.csv
WARNING: Cannot find objects with specified duplicate user principal name
[email protected]
Found 0 user(s) with duplicate user principal name.
Where to from here?
Richard P

Hi,
Did you talk about the Microsoft Azure Active Directory Sync tool ?
If yes, this issue occurs if one or more of the following conditions are true:
An object in the on-premises Active Directory has an SMTP address that's the same as the SMTP address of the object that's reporting the problem.
An object in the on-premises Active Directory has a mail attribute that's identical to the object that's reporting the problem.
An object already exists in your organizational account and has the same SMTP address or mail attribute as the object in the on-premises Active Directory
More detail information, please refer to:
http://support.microsoft.com/kb/2520976/en-us
[Troubleshooting] Unable to update this object because the following attributes associated with this object
http://blogs.technet.com/b/aadsyncsupport/archive/2014/05/20/troubleshooting-unable-to-update-this-object-because-the-following-attributes-associated-with-this-object.aspx
Regards.
Vivian Wang

How do I create a product or item database so I can search fr the product and its files with hte pro

How do I create a product or item database so I can search for the product and its files with the products name or four digit code

Ok so I made some progress on this. I have figured out, that I can add a chained "add to cart" to certain items, then when they click the button for Buy now, it will add both items to the cart. However, this would require me to manually build each product page and generate a custom button for each one with both product IDs in it.
Can anyone offer help on how to put some JS in that would append a second function to the onclick function that BC Generates dynamically?
For the products that require a set up fee, I would assume I would add in to either the product templates or in to the item description some JS that would find the onclick of the buynow button and append a second function to also add to cart the setup fee product. The end result being code that looks like this:
<input type="submit" class="productSubmitInput" onclick="AddToCart(188536,6314368,'',4,'','',true);AddToCart(188536,6314367,'',4,'','',tr ue);return false;" value="Buy Now" name="AddToCart_Submit" />
Except of course, the product ID on the first AddToCart would be the main product with the second one being the one appended.
Does any of that make sense? lol

Program associated with Custom transaction code.

Hi Guys,
I was studying two custom transaction code made in my company's SAP System.
Program associated with one custom transaction was starting with name SAPZMxxx and program associated with other custom transcation code was starting with Z.
Can anyone tell me whhat is the difference or in other words what is the significance of starting with SAPZM....
Tushar.

You can exactly know the kind of program only seeing the program attribute.
Infact if the program name begin with SAPMZ, you're sure it's a module pool custom, but if it begin with Z* you can't be sure it's a report.
SAPM is a convention, if you're creating a program called SAPMZ... the system know you want to create a module pool.
But if you're creating a program called Z... the system can know which kind of program you want to create only after you've indicated the type in the attributes.
Here you can choose whichever type of program, a module pool too.
So the name of module pool can begin with SAPMZ or Z.
Max
Message was edited by: max bianchi

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Which table stores relationship of business roles and its associated roles.

Hi,
I want to know the table that stores the relationship between a Business role and its associated roles.
Please note that i am aware of the table GRACBUSROLESNAP that stores the business role relationship corresponding to a request id and this is not what i am looking for.
I want to know the table which stores the definition for business role.
Thanks & Regards,
Khush Bafna.

Hi Khush,
I think table GRACROLERELAT is used to store business role definition.
Best Regards,
Aman

ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.

Im trying to connect to my azure subscription via powershell on my machine but keep getting the following error when i run a command:
ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.
The steps i have taken so far are:
1. get settings file
Get-AzurePublishSettingsFile
2. Import settings file
Import-AzurePublishSettingsFile -PublishSettingsFile "C:\Users\me\Downloads\credentials.publishsettings"
3. I then run Get-Azuresubscription with the following output:
SubscriptionId : 699385c3-b83a-44af-a651-bxxxxxxxxx
SubscriptionName : Windows Azure MSDN - Visual Studio Premium
Environment : AzureCloud
SupportedModes : AzureServiceManagement
DefaultAccount : 3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4
Accounts : {3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4, 26B118D7F3C598FB8FE9CDC49AB5DE5E450C967C,
03E1E1F0B8C7717F11FB58A14138C35524AB3F8D, 9A2E1FD267ECCC0E9B8C151BD931FC4824E89184...}
IsDefault : True
IsCurrent : True
CurrentStorageAccountName :
TenantId :
I run Get-AzureAccount and get the following:
Id Type Subscriptions Tenants
3B68902B5170D5EC91BFCBE4CC27E2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
A8838F61C4
26B118D7F3C598FB8FE9CDC49AB5DE Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
5E450C967C
03E1E1F0B8C7717F11FB58A14138C3 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
5524AB3F8D
9A2E1FD267ECCC0E9B8C151BD931FC Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
4824E89184
85AD02CB8EB8AB20CF2C44FD9D19F2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
9B6BB2FCD2
Finally, when i try to run Get-AzureSQLDatabaseServer, to list my databases, i get this error:
WARNING: Client Session Id: '5911f288-7b02-4c94-bb9d-37b9ea5fc187-2015-01-13 11:47:54Z'
WARNING: Client Request Id: '3e5f7ea9-092a-46fd-a6a6-6916b9161b77-2015-01-13 15:25:41Z'
Get-AzureSqlDatabaseServer : ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated
with this subscription.
At line:2 char:1
+ Get-AzureSqlDatabaseServer
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-AzureSqlDatabaseServer], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Server.Cmdlet.GetAzureSqlDatabaseServer
I would appreciate any help in figuring out what i am doing wrong here.
Thanks,

OK. That won't work in Azure Automation though, as mentioned above. OrgID (recommended) or cert-based auth will need to be used. PublishSettings file won't work.
Correct, but the original question was:
<Quote>
Im trying to connect to my azure subscription
via powershell on my machine
</Quote>
I wanted to test automation script's core functionality without having to wait for the very very long time taken for an automation runbook
to spin up, actually run and provide output (can often take 2+ minutes for a trivial script). Although i cant run Workbooks on my pc, i can run the core modules (view virtual machines, databases etc) to ensure my logic is sound.

RosettaNet and its Compatability with C-folders

Can I please get some info about RosettaNet and Its compatability with C-folders....
its urgent
regards
jay

I would imagine since SEEBURGER is involved in integration solutions
<i>For 20 years, SEEBURGER has been the expert in SAP business integration. More than 1,200 SAP customers both large and small utilize our B2B/EDI solutions and expertise to connect with their applications and trading partners.</i>
http://www.seeburger.com/index.php?id=sap&no_cache=1&sword_list[]=SAP
Unfortunately I have no way of testing but perhaps someone will see the new activity in the thread and pop in.

Many to Many with Custom Objects 4 and up

Hello,
Pls. I need to define a new CO4 that will have a many to many relationship with Contact.
From OD help pg.775 I understand that I should use another CO (f.ex. CO5) to be the intersection. Help file indicates how to rename the objects...and put them in the related info. section... but I don´t know what FIELDS (if any) I should define in the intersection CO5.
Pls. Anyone could help ?
Txs. a lot.
Antonio

Yes. You have to define them in CO5 Layout.
You should see Name, Contact and Custom Object 04 (you may have renamed it). Not the Id field.
Then when you add THE CO5 layout to Contact Related section, you can add new association between Contact and CO4.
Don't forgot to enable the Access Profiles in Contact, CO4 and CO5.

What is the best way to create a SSRS Report with Header Data and its associated child data

So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
Member Name:
Member ID:
Member Address Line 1:
And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
Any help or guidance is greatly appreciated by this newbie.
Thanks for your review and am hopeful for a reply.
ITBobbyP

Hi ITBobby,
According to your description, you want to display all Claim Data for each Member. Right?
In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
2. Create a table and drag the Claim data into the table.
3. In Row Group. Right click on Details and add a parent group.
4. Select Member_ID in Group by.
5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
6. In Report Data, right click on Parameter-> Add Parameter.
7. Type Member_ID in Name and Prompt, select allow multiple values.
8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
9. Save and preview.
Reference:
Understanding Groups (Report Builder and SSRS)
Report Parameters (Report Builder and Report Designer)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Creating a contractor custom form and workflow associated with it OIM11g

we are using OIM 11.1.1.5 we need to implement a scenario where, A Manager or user in admin role creates the contractor using customized form and manager gets the contractor gets the creadentials of contractor and then contractor logs in OIM self-service console to request for AD account.
what are the steps that need to be performed to execute this
Thanks and appreciate your responses

I have created the request template and HR user who has HR admin role can log-in and access the request tab and request for others.
how can i achieve the following one
now the user who has been created by above HR user. the User should be able to log-in and access a link(custom) and (should be able to access only self-service) on request tab like "Request AD Account" this should take him to new form where his profile attributes are pre-populated and a Notes section where he will enter justification then submits the request. the request goes to his manager for approval and once he approves he will be provisioned into AD
Thanks

How to deal with custom object in OM for Nakisa security

Hi All,
We are implementing OrgChart 3.0 SP1 for live environment.
We have custom object in OM. Structural Authorization is based on that custom object. (The custom object is displayed as custom field in IT0001 (Org Assignment). Also we are using Org Key. The combination of custom field + org key decide the structural authorization)
Does Nakisa security work on this kind of structural authorization ?
Does this required any development efforts? OR we can make it with configuration changes? What are the changes required and where to do it?
Thanks
Dave

Hi Luke,
Thanks for the reply.
When I selected the security authentication option SSO with log on ticket, it shows the following error
Login Failed. Either you are trying to access the application outside of portal. Or the Portal issued ticket is rejected or expired
when I changed it to SSO with log in ID and Password, it shows the following error,
Error: Application error occurred during the request processing.
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: WebApplicationException log ID is [005056943A3100EA000000000000B294].
Can you please give any inputs?
Thanks
Dave

Leads and its associations with Custom Objects 4-15

Similar Messages

Maybe you are looking for