Leaving on router 24/7 and electricity bill questi...

What would be the estimated extra price on the electeicity bills assuming that i turn on my router 24/7?
Recently I have been told to turn on my hub all the time because turning it off and on over night and in the morning could cause speed problems and other problems in the future. My parents say that it will cost a lot but I read that it would be a low amount such as less than 20 pounds a year?
Does anyone know how much it would cost per year to leave the router runing all the time.
I read that the hub v2.0 uses 10w but I have fhe 3.0 hub which I'm not sure the watt usage on that.
I know that the price per unit varies by 1-3p depending on night and day and also the watt usage is slightly lower when the router is in idle (?) which is jard to get specific price.
Just want to know a general estimate on how much extra it will be per year.

Have a look here to work out the cost:
http://www.cryer.co.uk/brian/misc/how_much_electricity.htm
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Similar Messages

Disconnecting Line and Final Bill

I had been a loyal Verizon Wireless customer since 2008. I
was on a share plan with my wife and my brother, and I would pay the bill each
month which was about $160 for the three of us each month. I never missed one
single payment. Well the 3 of us decided to switch to
US Cellular. My brother’s wife had already been there, and they had these new
phones for a penny and it was time as we’ve had these same phones for 5 years
almost now, we were out of contract, and I had a work discount through US Cellular. So.......
February 22, 2014 the three of us went over to US cellular
and started a new plan with new phones. My phone number and my brother’s phone
number switched without a problem. However, my wife, who’s number was from a
different region could not be switched, we needed to get her a new number.
After we switched, US Cellular told me to call Verizon the very next day (which
was February 23rd) and disconnect/deactivate my wife’s line because
that one would not happen automatically as they didn’t transfer her old number.
So on February 23rd, I did
just that. I called Verizon and they said we were disconnecting it and I’d get
the next bill and would have to pay that and should be done.
Well sure enough around March 1st, the next bill
came, and on it is the full balance of $160 due March 10th. I question this and
call Verizon again admitting I thought it would be a lesser amount. They instructed
me to look at the billing date. The cycle was from January 15th to
February 15th on the bill that is due by March 10th. Well
we switched phones on February 22nd, so it made sense to me that
this bill didn’t reflect the few days of February 16- 22nd but
rather the previous full month from January 15th up until February 15th.
So far so good, I just misunderstood the bill cycle date.
So I asked if I could just pay off the remaining amount and
be done with it all. I mean we’re in the beginning of March now and haven’t used
the phones since February 22nd, and they’re all disconnected now,
why not? They told me unfortunately no, I had to pay this whole bill first and
then wait for the next bill cycle to come available which wouldn’t happen until after
March 10th for that last billing cycle which would reflect those few days of, Feb 16- Feb. 22nd.
The rep ensures me it will probably only be a few bucks per line for those 6-7
days or so. I said that’s too bad I can’t
just pay the whole thing now but oh well; we’ll do it your way. I guess I’ll just
go online in a few days and pay it and
then come the next bill cycle (which doesn’t go out until March 10th)
we’ll go online about that and pay the rest; just a few dollars per line.
The rep butts in, “yeah, about that sir, once you disconnect
the line, as you've done, you lose service to your online bill pay and accounts online so you
will have to call us to pay. I’m thinking aww man, another inconvenience, but
oh well, I’ll do what I have to do and call back twice to get these bills paid.
Well, a week later a couple days before March 10th
when the full $160 is due, I call and pay it (which took me forever on hold as
one of their centers was down). She apologized for the delay, took my payment,
and said when that last bill gets generated here in a few days (March 11th that shows usage from Feb 15th to March 15th, but will only reflect the few days I used the phones in that cycle which would be to the 22nd) I can just push pound
something something and pay the last bill through the automated phone system and be
done. I said okay
Come now to March 22nd I get that final bill in
the mail. I expect it to be a few bucks per line as is it would only reflect
from February 15th to Feb 22nd when we disconnected our
lines. But no, the bill is $120. That's almost
3/4 of the price of all three of our phones for an entire month. I was thinking something must be wrong, unless they didn't prorate the bill in which case the whole month (which would be a rip off) would be $160 like usual but why all this confusion? I was hoping to just use the automated bill
pay via phone to pay for those 6 days in the last cycle and be done with it forever but no, now I have to call the
company AGAIN to figure out all of this. What happened next was a nightmare!
I called and spoke with a rep asking why the outrageous
price for just a few days of service on those lines. She puts me on hold and
looks into it. She comes back and says my wife’s line was never disconnected. I
said you have to be kidding me; I’ve called in to disconnect it initially and
then even called back w/ questions on how the last bill works and everything
after we disconnect the lines. You can even see that no data or minutes were ever used on
any of those 3 lines since Feb. 22nd. She answers, yes sir I see
that, let me place you back on hold. Okay I figure she’s going to check this
out. She comes back again, well sir I
see you called a couple times but I don’t see that you requested to disconnect your wife’s
line. WHAT?! I thought. Why else would I originally call? US Cellular was right and told me specifically told me to do this the very next day and I did! AND THEN I ALSO EVEN CALLED BACK LATER AFTER THE NEXT BILL CAME CONFIRMING ALL THE LINES WERE DISCONNECTED AND HAD QUESTIONS ON HOW I LEAVE VERIZON AND WHAT MY FINAL PAYMENT WOULD BE! And why was my
account access to pay my bill online turned off (I did try to go online to see
if I could pay the last bill and I was no longer to go online) if my wife's line was never disconnected? This is getting
nuts. She placed me on hold again and returns, okay sir, this is what I’m going
to do. I’m going to suspend her line today and then you can call back tomorrow
to disconnect it. Then you can pay off the last payment on the next bill cycle.
At this point my blood is boiling, was this a joke. I should
not have to call back again, this should have been disconnected weeks ago! and
you can see nothing has been used on those phones. I told her this is the last bill cycle and I’m not calling
back and we need to get this disconnected today and that bill lowered to its
fair amount. She places me on hold again
and comes back and tells me she had overridden something and got the line disconnected
today and she was going to take $40 off my phone bill.
At this point I’m like finally, but an hour later and now my
phone bill is $70 for the three phones that we used for 6 days!! I said 6 days is about 1/5th of the
month. If our final bill is reflecting only the days of the month we used it
should be more like 1/5 the price of our original monthly bill which was $160. which would be more like $32, not $70. I had to explain some of the simple math to her and she
goes on to push about how the line was active and such, and I said but that
wasn’t my fault you didn’t disconnect it and this is not a fair final bill for
6 days of usage!! She put me on hold yet
again and finally came back and said I’m going to take off another $40 from the
bill but it will need approval from my supervisor which will take 2 business
days. If and when she approves it, you will get the final bill in the mail for
the $120 minus an $85 credit. FINALLY!!!
I wasn’t even looking for something free, I just wanted a
fair final bill after I’ve taken the time to call to disconnect my wife’s line
and understand how the final bill works and everything. No one should have to
go through this and spend hours on the phone trying to understand how the
process works so you don’t get duped and then end up getting duped anyway and
having to spend more time to fix that. It was a big rip-off and extremely frustrating.
Telling me the line’s not disconnected but taking away online bill pay, and the
final bill itself was not only wrong, but it outright lied in certain spots.
Almost as though they were making up dollar amounts and dates. The bill cycle on the last bill said Feb 15th to March 15th but then under then under my wife's name there was the charge of $120 and the dates next to that said March 15th - April 15th!?!?! The phones haven't been used since Feb 22nd! Not simple at all and very confusing. Make sure you’re carefully monitoring your
bills when leaving Verizon Wireless. Needless to say, I’m never going back to
them so I won’t have to worry about this again. I just hope this new paper bill that shows the credit gets to my mail box before it's due date of 04/10 so I don't get a late charge. I was assured it would. I hope the CSR is telling the truth this time for once. I have faith in the last one I spoke with. I'm hoping she doesn't let me down too like everyone before her so far has.

Leaving is quite simple via porting out. As you noted when two of the lines ported successfully. However I can see no valid reason why the wifes number could not be ported out. There are porting laws in place. But on to the rest.
If your monthly service runs as you are saying "The cycle was from January 15th to February 15th on the bill that is due by March 10th".
That would be incorrect. If your monthly bill is from lets say January 15 through February 14 then your payment on the account is always that last day. (February 14th.) The next new billing cycle is now February 15th through March 14 again the bill closing date is the day the invoice must be paid. All three lines since they were ported on February 22nd. still must be paid in full (2 ported & 1 not ported). There is no prorating in this case. Now in regards to the bill closing date again would next be March 15, 2014 through April 14, 2014. Since the wife's phone was not closed the only device should be just that line and no other. The other lines are paid up through March 14, 2014 so there should be no further charges.
Some where along the line folks must remember to terminate service (port) a few days BEFORE the next bill comes due. remember we pay in advance.
Good Luck

FIOS not good ISP for gaming in North East, bad routing to canada and west coast.

http://forums.verizon.com/t5/FiOS-Internet/Keep-getting-kicked-out-of-game-MechWarrior-Online/m-p/66...
Yes the same thing has been happening to me. It also appears it was a problem back in january according to this thread....
http://forums.verizon.com/t5/FiOS-Internet/Routing-Latency-issues/m-p/525091/highlight/true#M34574
Here is a past MWO thread started at the same time by a verizon customer. I believe almost all of thise users have quit fios or quit MWO.
http://mwomercs.com/forums/topic/91680-higher-ping-times-after-patch/page__st__80
Many people in the game believe its due to MWO patches, but I think thats just a placebo. I believe it is to do with the cold winter months and verizon not being able to handle the load. Speedtests to any west coast, specifically vancouver server, have the same results.
I have called verizon, gone to live chat, spoken to many different supervisors and technicians and have gotten no help with this issue. They basically tell me its not their problem.
After doing many traceroutes and speedtests. It appears I am getting routed through europe to get to canada from NY, which just doesn't make any common sense. First verizon claims the link router sending us to europe is not owned by them. Then we have to prove to them that it in fact is with public business records and WHOIS reports. Which also seemed to be the case for others in that thread back in january.
IT seems the issue in january might of been that particular router was geting overloaded they might have fixed the circuit on that verizon link/border router in question. But now it seems the issue has been passed up the line to the next link router and now that next circuit up the line is getting congested.
Below you can see some traceroutes when I am receiving the bad ping:
Tracing route to relay-1.mwtactics.com [70.42.29.65]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.1.1
2 9 ms 10 ms 5 ms L100.NYCMNY-VFTTP-175.verizon-gni.net [71.167.34.1]
3 11 ms 12 ms 7 ms G0-1-3-7.NYCMNY-LCR-21.verizon-gni.net [130.81.185.220]
4 94 ms 12 ms 10 ms ae0-0.NY325-BB-RTR2.verizon-gni.net [130.81.209.110]
5 9 ms 15 ms 12 ms 0.so-4-0-1.XT2.NYC4.ALTER.NET [152.63.10.29]
6 9 ms 16 ms 11 ms TenGigE0-5-0-0.GW8.NYC4.ALTER.NET [152.63.21.65]
7 28 ms 25 ms 44 ms tinet-gw.customer.alter.net [152.179.72.122] (previous congested router routing to europe)
8 38 ms 39 ms 39 ms xe-8-2-0.tor10.ip4.tinet.net [141.136.107.98]
9 100 ms 104 ms 103 ms internap-gw.ip4.tinet.net [77.67.70.94]
10 97 ms 99 ms 98 ms border1.te7-1-bbnet1.tor001.pnap.net [70.42.24.132]
11 103 ms 103 ms 96 ms relay-1.mwtactics.com [70.42.29.65]
Trace complete.
1 1 ms <1 ms <1 ms 192.168.1.1
2 8 ms 10 ms 10 ms L100.NYCMNY-VFTTP-175.verizon-gni.net [71.167.34.1]
3 15 ms 15 ms 12 ms 130.81.185.220
4 25 ms 84 ms 12 ms ae0-0.NY325-BB-RTR2.verizon-gni.net [130.81.209.110]
5 22 ms 21 ms 10 ms 0.so-4-0-1.XT2.NYC4.ALTER.NET [152.63.10.29]
6 18 ms 16 ms 19 ms TenGigE0-7-4-0.GW8.NYC4.ALTER.NET [152.63.21.133
7 35 ms 33 ms 34 ms tinet-gw.customer.alter.net [152.179.72.122]
8 56 ms 54 ms 55 ms xe-8-2-0.tor10.ip4.tinet.net [141.136.107.98]
9 118 ms 119 ms 112 ms internap-gw.ip4.tinet.net [77.67.70.94]
10 111 ms 111 ms 109 ms border1.te7-1-bbnet1.tor001.pnap.net [70.42.24.132]
11 116 ms 111 ms 109 ms relay-1.mwtactics.com [70.42.29.65]
Here are some traceroutes when I am getting the good ping:
Tracing route to relay-1.mwtactics.com [70.42.29.65]
over a maximum of 30 hops:
1 <1 ms <1 ms 1 ms 192.168.1.1
2 10 ms 5 ms 8 ms L100.NYCMNY-VFTTP-175.verizon-gni.net [71.167.34
.1]
3 11 ms 13 ms 10 ms G0-1-3-7.NYCMNY-LCR-21.verizon-gni.net [130.81.185.220]
4 48 ms 11 ms 10 ms ae0-0.NY325-BB-RTR2.verizon-gni.net [130.81.209.110]
5 83 ms 30 ms 33 ms 0.so-4-0-1.XT2.NYC4.ALTER.NET [152.63.10.29]
6 19 ms 12 ms 23 ms TenGigE0-7-1-0.GW8.NYC4.ALTER.NET [152.63.21.125]
7 14 ms 12 ms 15 ms tinet-gw.customer.alter.net [152.179.72.122]
8 29 ms 26 ms 28 ms xe-8-2-0.tor10.ip4.tinet.net [141.136.107.98]
9 33 ms 34 ms 34 ms internap-gw.ip4.tinet.net [77.67.70.94]
10 36 ms 40 ms 44 ms border1.te7-1-bbnet1.tor001.pnap.net [70.42.24.132]
11 38 ms 40 ms 39 ms relay-1.mwtactics.com [70.42.29.65]
Trace complete.
1 1 ms <1 ms <1 ms 192.168.1.1
2 6 ms 11 ms 6 ms L100.NYCMNY-VFTTP-175.verizon-gni.net [71.167.34.1]
3 10 ms 11 ms 12 ms 130.81.185.220
4 88 ms 9 ms 11 ms ae0-0.NY325-BB-RTR2.verizon-gni.net [130.81.209.110]
5 8 ms 11 ms 11 ms 0.so-4-0-1.XT2.NYC4.ALTER.NET [152.63.10.29]
6 14 ms 21 ms 11 ms TenGigE0-7-0-4.GW8.NYC4.ALTER.NET [152.63.25.226]
7 14 ms 10 ms 10 ms tinet-gw.customer.alter.net [152.179.72.122]
8 26 ms 29 ms 28 ms xe-8-2-0.tor10.ip4.tinet.net [141.136.107.98]
9 23 ms 22 ms 22 ms internap-gw.ip4.tinet.net [77.67.70.94]
10 39 ms 39 ms 40 ms border1.te7-1-bbnet1.tor001.pnap.net [70.42.24.1
32]
11 38 ms 39 ms 39 ms relay-1.mwtactics.com [70.42.29.65]
Going from 20 ping to 100 depending on time of day, which seems to 24 hours a day now! is a real tease and frustrating, and when there is packet loss or excessive spikes, thats when we lose the connection, session lost messages, black screen issue...etc...
When reading that past thread, The problem server back in january was tinet-gw.customer.alter.net [152.179.72.122] (the one that routes us through europ) but now it seems the burden has been passed up the chain to the next link/border router and circuit internap-gw.ip4.tinet.net [77.67.70.94].
Maybe the guys back in january were able to pressure verizon to increase bandwidth on the tinet circuit on tha verizon router in NY because they actually owned that server, even though they originally tried to lie and claim they didn't. Even if not part of FIOS, and after the 6th hop. Its obvious it was theirs cause it ends with alter.net, was right here in NYC, WHOIS reports gave verizons email, and business records show they bought it in 2006.
Fios doesn't contact DSL, residential doesn't contact business...etc.. Its like this company doesn't remember how 9/11 happened!!!
BUt Now the burden is on the the next link router which routes to internap. And that is a german server and part of tinet.net and is a different company that verizon does not have direct access to. Verizon would not even email the admin for me, which many feel is unprofessional.
You can try emailing that admin yourself or doing some trace routes your self and calling and pressuring verizon to address the issue themselves.
It seems verizon fios can't handle routing people to canada, especially in the cold months of the year. They must not be able to handle their load. It seems verizon fios is really a scam, and fiber optics is just a pretty name, but in reality is no different then any other network, except locally. The only difference we need to look at when buying bandwidth, is pricing period. The fact it is fiber optics means diddly squat! And the more people that get fios, i predict the worse their network is going to get.
I have sent an email to the admin of that german server {edited for privacy} but I would be shocked if I got any reply. Ridiculous for verizon to suggest I do that in the first place.
People with timer warner in the same area are getting constant 20-40 ping to MWO, while verizon fios customers are getting terrible connections right now.

What you are seeing here has nothing at all to do with what your speed is. Latency has nothing to do with speed, it has to do with distance and network congestion. Your local ISP, no matter who it is, can not directly affect how another company (in your case Internap Network Services Corporation) routes data. Now if there was a problem in a link directly connected to your local ISP, for example:
4 94 ms 12 ms 10 ms ae0-0.NY325-BB-RTR2.verizon-gni.net [130.81.209.110]
5 9 ms 15 ms 12 ms 0.so-4-0-1.XT2.NYC4.ALTER.NET [152.63.10.29]
*from your tracert
The above link is leaving Verizon local control and entering Alter.Net control, if there was latency on a regular basis there then this should be reported to Verizon as your local ISP and that will filter up to their NOC group who will contact Alter.net and figure out the issue with that link. If the issue is a faulty link it will get fixed, if the issue is a link undergoing to much traffic its ability to handle the traffic will either be increased where possible or routed around where possible. The whole issue of peer-to-peer networking is very complex (which is what the Supreme Court was reviewing by the way) and a number of issues come into play. If the connection point only experiences high traffic sometimes on a very limited basis then generally routing some traffic to different connections is what is done.
Now in your later postes you show the following:
8 38 ms 39 ms 39 ms xe-8-2-0.tor10.ip4.tinet.net [141.136.107.98]
9 100 ms 104 ms 103 ms internap-gw.ip4.tinet.net [77.67.70.94]
10 97 ms 99 ms 98 ms border1.te7-1-bbnet1.tor001.pnap.net [70.42.24.132]
11 103 ms 103 ms 96 ms relay-1.mwtactics.com [70.42.29.65]
That clearly shows the problem is inside the tinet.net (Internap Network Services Corporation) network. This network is also the network providing the link into this game server. What does this tell us? From what you are seeing it tells us that either Internap does not have enough bandwidth to server the amount of traffic down to this server or the game company has not purchased a high enough link. The latter is unlikely. Most likely the issue is that Verizon's Fios product is growing with more and more people are trying to reach that game from the Fios network. This causes issues at the link point, which Verizon apparently has taken steps to fix as well as those internal links going down to the game servers. Now your local ISP (Verizon) cannot help the latter half of that. One can hope the end user ISP (in your case Internap Network Services Corporation) will increase their internal bandwidth or router traffic around problem areas.

Process For Electricity Bill Payment in SAP

We need to deploy an automated process for electricity bill payments for a customer. What is the best practice that could be followed to automate electricity bill payments where the electricity service provider just auto-debits the customer based on the electricity consumed by the customer. How to manage such process in SAP system using ECC MM, FI and SRM ?

Hello Kathiravan,
its really a very strange kind of requirement never though to doing such in SRM . I guess you are moreover concern with CRM kind of thing (not sure)
Thanks
Gaurav Gautam

How to display electric bill on web ??

HI experts
My issue is from ISU-Electric Distribution Company; its having a good consumer base. management wants to display the ELECTRIC-BILL through webinterface.so any one can suggest me in general ISU what all are the ways and means required to do that
Is it possible through?
1.ISU is havg a concept Internet self service concept is any one can share some knowledge about this technology, the implementation methodology, any document to support, and blueprint to support, or the steps and ways to configure it
ISU-CCS-Internet Self Service
2.Is it possible through Enterprise portal so how and what all r the implementation methodology in that and is it the standard solution for such scenario.
3.What ultimate steps as a tech person recommend is to fetch and made 4-5 ABAP-REPORTS which will fetch the data and upload it to preexisting WEBSITE of the company.
Gaurav

Hi,
You could use something like this.
get message manager
DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager
report message
CALL METHOD lo_message_manager->report_success
    EXPORTING
      message_text              =
     params                    =
     msg_user_data             =
     is_permanent              = ABAP_FALSE
     scope_permanent_msg       = CO_MSG_SCOPE_CONTROLLER
     view                      =
     show_as_popup             =
     controller_permanent_msg =
     msg_index                 =
     cancel_navigation         =
     enable_message_navigation =
    receiving
      message_id                =

Unable to connect router to internet and computer at the same time.

I'm not sure where to start, but here goes. We recently got the internet set up at out new house. Of course, the only connection is downstairs and the computer is upstairs. The guys that set the internet up said we needed a wireless router and I said "Ok, cool."
He gave us a router and a receiver and hooked them both up. (I myself know quite a bit about computers but I figured I'd let him do his job.) So we're all set up and I start playing my game and I get a "Windows has a conflict with another computer on this IP" or something like that. I figured I might as well put some security up on this thing. So I go downstairs and hit the SecureEasySetup (SES from now on) button and come back up here and follow all of the steps and it say's that it's not connected. I run back downstairs and looc for the MAC Address and notice that it was not mentioned as one of the selectable routers.
I figured the guy didn't really install the router, just hooked the internet up into it and plugged it in, and that my reciever picked up someone else's from the neighborhood. So I go and get the CD to install and notice that I have to have the router plugged into the computer AND the internet at the same time for installation to complete. Uhh, that could be a problem. Computer upstairs + router and internet cable downstairs = no go.
So here's my question: What can I do about that? I can't have the computer and the internet hooked up to the router at the same time.
Thanks to everyone that replies.

First off... don't use the setup CD.
Configure your router by http(ing) to the IP address, log in, and configure that way. much easier. typically its http://192.168.1.1
username admin
password admin
once you get logged in change that password and Remember it! If you lose it, you'll have to reset to factory defaults.
2nd
Change your SSID. Default is "linksys" you'd be suprised how many people leave the thing as defaults and someone else is using yoru network connection...
3rd
Add security WPA is better than WEP
4th
Now go upstairs and look for your new SSID, connect with your WPA code and you should be set.
5th - Not needed but for info...
If you want to go that far... you can change your DHCP set to something like 10.0.10.x but you'll have to manually change the IP of the router to that subnet as well...

HT201272 I subscribed to National geographic and get billed every month but I never have been able to find or download each magazine. What am I missing?

I subscribed to National Geographic and get billed every month for it but never have been able to find where to download my purchases what am I missing?

1. Reboot iPad
2. Reboot router
Note: Make sure your printer is on the same network as your iPadr (run CD to setup network printer)

Open sales orders and open deliveries and open billing doc to sap from legesy

Dear all
i have some open sales orders and open deliveries and open billing doc are there in the legesy system
so i want to know how to transfer the doc to sap by using lsmw plz tell me

Hi Amith,
it is always good to search in Google before posting .LSMW is very old topic and i am sure you will get lots of Documents on this .Please go through the below link .you will get some idea on this.
http://scn.sap.com/thread/1012472
there are 14 steps in LSMW and it is same for all (master data and Transaction Data)
Pls practice this in your sand box or quality system before working it in the client requirement.
Hope this helps to you
Regards
Sundar

Problem of routing between inside and outside on ASA5505

I have a ASA5505 with mostly factory default configuration. Its license allows only two vlan interfaces (vlan 1 and vlan 2). The default config has interface vlan 1 as inside (security level 100), and interface vlan 2 as outside (security level 0 and using DHCP).
I only changed interface vlan 1 to IP 10.10.10.1/24. After I plugged in a few hosts to vlan 1 ports and connect port Ethernet0/0 (default in vlan 2) to a live network, here are a couple of issues I found:
a) One host I plugged in is a PC, and another host is a WAAS WAE device. Both are in vlan 1 ports. I hard coded their IP to 10.10.10.250 and 10.10.10.101, /24 subnet mask, and gateway of 10.10.10.1. I can ping from the PC to WAE but not from WAE to the PC, although the WAE has 10.10.10.250 in its ARP table. They are in the same vlan and same subnet, how could it be? Here are the ping and WAE ARP table.
WAE#ping 10.10.10.250
PING 10.10.10.250 (10.10.10.250) from 10.10.10.101 : 56(84) bytes of data.
--- 10.10.10.250 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
WAE#sh arp
Protocol Address Flags Hardware Addr Type Interface
Internet 10.10.10.250 Adj 00:1E:37:84:C9:CE ARPA GigabitEthernet1/0
Internet 10.10.10.10 Adj 00:14:5E:85:50:01 ARPA GigabitEthernet1/0
Internet 10.10.10.1 Adj 00:1E:F7:7F:6E:7E ARPA GigabitEthernet1/0
b) None of the hosts in vlan 1 in 10.10.10.0/24 can ping interface vlan 2 (address in 172.26.18.0/24 obtained via DHCP). But on ASA routing table, it has both 10.10.10.0/24 and 172.26.18.0/24, and also a default route learned via DHCP. Is ASA able to route between vlan 1 and vlan 2? (inside and outside). Any changes I can try?
Here are ASA routing table and config of vlan 1 and vlan 2 (mostly its default).
ASA# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 172.26.18.1 to network 0.0.0.0
C 172.26.18.0 255.255.255.0 is directly connected, outside
C 127.1.0.0 255.255.0.0 is directly connected, _internal_loopback
C 10.10.10.0 255.255.255.0 is directly connected, inside
d* 0.0.0.0 0.0.0.0 [1/0] via 172.26.18.1, outside
interface Vlan1
nameif inside
security-level 100
ip address 10.10.10.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
All other ports are in vlan 1 by default.

I should have made the config easier to read. So here is what's on the ASA and the problems I have. The ASA only allows two VLAN interfaces configured (default to Int VLAN 1 - nameif inside, and Int VLAN 2 - nameif outside)
port 0: in VLAN 2 (outside). DHCP configured. VLAN 2 pulled IP in 172.26.18.0/24, default gateway 172.26.18.1
port 1-7: in VLAN 1 (inside). VLAN 1 IP is 10.10.10.1. I set all devices IP in VLAN 1 to 10.10.10.0/24, default gateway 10.10.10.1
I have one PC in port 1 and one WAE device in port 2. PC IP set to 10.10.10.250 and WAE set to 10.10.10.101. PC can ping WAE but WAE can't ping PC. Both can ping default gateway.
If I can't ping from inside interface to outside interface on ASA, how can I verify inside hosts can get to outside addresses and vise versa? I looked at ASA docs, but didn't find out how to set the routing between inside and outside. They are both connected interfaces, should they route between each other already?
Thanks a lot

To create Sale Order , Delivery and then Billing Automatically .

hi all ,
I want to create a program which will create SALES ORDER , then make DELIVERY of it and then BILLING .
Also i want to restrict the sale order to be create of those CUSTOMER whose credit limit is exceed , which is maintain in FD32 tcode .
If i go with BDC for Sales order it creates the sales order with a warning message , which i dont want .
Is there any BAPI for doing this ?
I do have try to find out the customer whose credit limit are exceed so as to restrict them in Program itself , but do not find the table for credit exposure to compare it with credit limit .
Please give me your Suggestion .
Secondly , Which BAPI is suitable for DELIVERY and BILLING in 4.7 version .
Thanks .

Hi,
Check these below BAPI's
BAPI_SALESDOCU_CREATEFROMDATA
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_OUTB_DELIVERY_CREATE_SLS Generates Delivery for Customer Order
BAPI_BILLINGDOC_CREATE Custimer Individual Billing Document : Create Billing Document
BAPI_BILLINGDOC_CREATEFROMDATA Create Customer Individual Billing Doc.
Regards,
Jyothi CH.

Excise invoice without delivery - Milestone and Progressive billing

Hi all
We have a scenario where we need to create excise invoice wihtout delivery
We are using order based billing because we have PS(WBS) integration, milestone and progressive billing scenario.
We dont want to use J1is, we want to use J1iin only, please let me know any possible solution.
Thanks All

Hi Guru's
Any help please...
Thanks

Link between billing doc and cancelled billing doc

Hi,
If there is a cancelled billing document then how can I find for which original document the cancelled document was posted? What is the link between Original billing document and cancelled billing document. I mean is there any database field level link?
Thanks!!
Regards,
Sriram.

Hi,
Thanks for your reply. Is there any function module to get the original and cancelled document.
Thanks!!
Sriram

My wife and I have both Iphone 5 and 5c. We have currently one icloud account and the bill is under one account number for both phones. We are not set up right. We want to be able to share only contacts, calendars, pictures, music. How do we do this.

My wife and I have iphone 5 and 5c. We want to only share contacts, calendar, music and photos. We currently have one iclud account and are billed under one customer number. How can we accomplish this?

Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. the computer says that if I "Sync" the iPad will be erase, and become like my iPods. how can I just get my files onto

I am a first-time iPad owner/user. I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. iTunes message says that if I "Sync" the iPad will be erase, and become like my iPods. If I make a new iTunes account, would the apps be erased when I tried to use it?
How can I just get my files onto this iPad, and still have the apps that my relative left there for me?
Thank you.

iPads sync to 1 computer only.
All media and apps are tied to the Apple ID that purchased them.
Without your relatives ID and password, you cannot update any of the Apps.
I am pretty certain he is also violating Apples terms of service by giving you the apps.

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Leaving on router 24/7 and electricity bill questi...

Similar Messages

Maybe you are looking for