Leg determination not picking Distance and Time from Config

Current process : User creates outbound shipment assign outbound deliveries to it and once they press 'Planning' button stages (Leg determination) are created automatically.Categories of leg determination in Shipment is set as 1.
For example if an outbound delivery is going from plant ABC warehouse 01 to customer(ship-to) XYZ. It creates a stage from plant ABC/01 to destination XYZ.
I am working on requirement where we would like the distance and Duration automatically filled-in when these stage(s) is/are created.
I've made following changes in config
1) Defined Transportation Connection Point 'ZABC' with reference to plant warehouse ABC/01
2) Defined Transportation Connection Point 'ZXYZ' with ref to customer XYZ.
3) In 'Define Route and Stages' , I've defined 'Route Stage' from ZABC to ZXYZ under Route which is used in Shipment. And within this Route Stage I've mentioned values for 'Distance', 'Total duration' and 'Travel duration'.
After these setting I am expecting values 'Distance', 'Total duration' and 'Travel duration' to be picked up during Leg Determination but it's not.
Could someone please point me in right direction.
Regards,
Pawan.

Hi,
I do not think that this does work. But if you have defined the route with stages already anyway: why do you then have a leg determination? In this case you should choose to "take over stages from route" (the field above the setting for the leg determination).
Best regards
Juergen

Similar Messages

HT1296 My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

Only the carrier it is locked to can authorize unlocking it. Contact them.

PO not picking up the Price from Info Record ???

Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.

Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

Service entry Sheet does not pick any Condition charges From Service PO

Hi All
Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

HI,
Please check Sap note 381030
Along with other thing It says
"Delivery costs are generally not supported in external services management and in case
of blanket purchase orders, item category D or B. Instead of representing delivery
costs via conditions, in case of service documents, freight costs and other, SAP
recommends to add in additional service lines."
So that is the reason you are not getting those account entry in the time of service entry sheet
Use another service line with text ( or service master) for the additional costs as suggested by SAP
Hope it clarifies

How to load date and time from text file to oracle table through sqlloader

hi friends
i need you to show me what i miss to load date and time from text file to oracle table through sqlloader
this is my data in this path (c:\external\my_data.txt)
7369,SMITH,17-NOV-81,09:14:04,CLERK,20
7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
7566,JONES,02-APR-81,09:24:10,MANAGER,20
7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30my table in database emp2
create table emp2 (empno number,
                  ename varchar2(20),
                  hiredate date,
                  etime date,
                  ejob varchar2(20),
                  deptno number);the control file code in this path (c:\external\ctrl.ctl)
load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)this is the error :
C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:\>any help i greatly appreciated
thanks
Edited by: user10947262 on May 31, 2010 9:47 AM

load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)Try
load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime "to_date(:etime,'hh24:mi:ss')", ejob, deptno)
this is the error :
C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:\>
That's not an error, you can see errors within log and bad files.

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

Can not set date and time

i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Readind Date and Time from a folder.Urgent help please

Folks,
I need some help regd reading of date and time from a folder.
I have a folder which has 5 files.
I need to read these files along with the date and time
The date and time has to be in the format:
mm/dd/yy and the time in 11:55
I am attaching my code below,
The f.lastModified() doesnt display the data in the current format
Can some one please please help me to get the data in the format defined above
private void readFoldert(){
   String folder = "/images/";
   File f1 = new File(folder);
   ArrayList al = new ArrayList();
    if(f1.isDirectory()){
     String s[] = f1.list();
      for(int i=0; i<s.length;i++){
         al.add(s[i] + f1.lastModified);
} // End of if.


Here's how to format a time. I hope you can figure out how to format a date:import java.text.*;
import java.util.*;
public class Test {
    public static void main (String[] parameters) {
        Calendar calendar = new GregorianCalendar ();
        calendar.setTimeInMillis (new java.io.File ("c:\\windows").lastModified ());
        System.out.println (DateFormat.getTimeInstance (DateFormat.MEDIUM).format (calendar.getTime ()));
}Kind regards,
  Levi

HT201493 When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

The whole idea to an icloud account is that one user uses it and has all their devices synced together. Different users need different Apple IDs to create their own icloud accounts. Note that everyone can still use the same ID for an iTunes account (to share purchases).
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

Is there a way to remove the date and time from pictures?

Is there a way to remove the date and time from phoos in iPhoto?

Are you referring to the Date and Time some cameras put right on the image? If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
If your asking about some other date post back.
regards

Why can I not buy music and movies from the SA site with my SA credit card???

Why can I not buy music and movies from the SA site with my SA credit card???

I'll answer myself after reading the threads, now I am so sorry I bought the dam thing!!

HT1692 why does my ipad not pick up distribution lists from my contacts list?

why does my ipad not pick up distribution lists from my contacts list?

What is selected under the Music tab for your iPhone sync preferences with iTunes?

Can not set date and time on a new Apple TV

can not set date and time in a new appletv

Hello lfsalas55,
You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen

Health app, count steps but not count distance and running

Hi,
After update 8.2, health app not count distance and running.
Only count steps, today have 2.951 steps but total distance is 0,01km
Somebody has the same problem?
Thanks

I found a workaround!
Launch Health, open Walking+Running Distance, tap Share Data, and check all apps in here, find them, (backup if you like, ) delete them, and done!

Leg determination not picking Distance and Time from Config

Similar Messages

Maybe you are looking for