Legend text length 30

I am trying to set my legend names to a string longer then 29 charters but can not. If I try to set it to a string larger then 29 I get a Runtime error that the attribute value passed is not a valid value but do not get the error if the string is 29 charters or less. I have set the ATTR_LEGEND_AUTO_SIZE to 1 and manualy set the legend to a larger size but my text length max still is on 29. Is there a way to set the Max Text length in the legend to something larger?

TokarzJ wrote:
I am trying to set my legend names to a string longer then 29 charters but can not. If I try to set it to a string larger then 29 I get a Runtime error that the attribute value passed is not a valid value but do not get the error if the string is 29 charters or less. I have set the ATTR_LEGEND_AUTO_SIZE to 1 and manualy set the legend to a larger size but my text length max still is on 29. Is there a way to set the Max Text length in the legend to something larger?
Doesn't that property determine how many names are listed in the legend?
I can get more than that when I tried a chart in LV 8.6.
Plase post an example that demonstrates this issue.
Just trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

Issue with row/column text lengths in report painter

Hi Gurus,
I have created a report painter report with formatting of the row/column length text as medium, but for one FS item/GL Account the report when executed still picks up only the short text length. I am not sure how this can be resolved.
Any ideas is appreciated.
Regards
Satish

Applied OSS Note 360096 and it worked. Thanks for all your help.

How to handle the source text length exceed more than target text length size in Message mapping PI 7.31

I have a File to IDOC Message Mapping Scenario:
Source Field                         Targefield
Communiication Address-(Email ID)                                    E1EDK2 - TDLINE
Source Field length: 1/80                                                                               target Field length: Char\70
Mapping Condition:
Note: TDFORMAT = ‘=’ (Long Line), may need to create 2 TDLINE fields depending on length of text
So give the Solution for handling text Length exceed than target field lenght Using TDLNE and TDFORMAT......
Guide me and give Suggestions to achive this.

Hi ,
Below is the generic sol for your problem .Graphical mappings wont workout for your problem while using sub string .
Input -->Input string
Length -->length of TDLINE
MESSAGE_V1,V2,V3,V4....depends on how many TDLINES you expect .Here I have taken 4 .
public void SplitbyLength(String[] Input, String[] Length, ResultList MESSAGE_V1, ResultList MESSAGE_V2, ResultList MESSAGE_V3, ResultList MESSAGE_V4, Container container) throws StreamTransformationException{
int lengthVal = Integer.parseInt(Length[0]);
int InpLenVal ;
for(int i=0;i<Input.length;i++)
InpLenVal =Input[i].length() ;
if (InpLenVal<=lengthVal)
MESSAGE_V1.addValue(Input[i].substring(0));
MESSAGE_V2.addValue(ResultList.SUPPRESS);
MESSAGE_V3.addValue(ResultList.SUPPRESS);
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if ((InpLenVal>lengthVal) && (InpLenVal <= (lengthVal*2)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,InpLenVal));
MESSAGE_V3.addValue(ResultList.SUPPRESS);
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if ((InpLenVal>(lengthVal*2)) && (InpLenVal <= (lengthVal*3)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),InpLenVal));
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if (Input[i].length()>(lengthVal*3) && (InpLenVal <= (lengthVal*4)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),(lengthVal*3)));
MESSAGE_V4.addValue(Input[i].substring((lengthVal*3),InpLenVal));
else if (Input[i].length()>(lengthVal*4) )
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),(lengthVal*3)));
MESSAGE_V4.addValue(Input[i].substring((lengthVal*3),(lengthVal*4)));
Regards
Venkat

Chart Legend, Text Change (Batch)

Hi,
I have about 40 reports all with the same charts, and the legend label uses the field labels so they look like "count of open accounts to date." While I can change the text names when I select the legend text in the Preview pane, it is only a band-aid fix because I don't want to have to manually change this text for all 40 of my reports. It'll add up to over 200 manual text edits!!
Please tell me there is a better way!!
I have CRXI
Thank You,
Frank

Hi Frank
Take a look here: @ Symbol in formula name when using formula for report chart data
I think this thread can help you.
Regards
Fabio

How to perform Text length more than 4000 bytes

I want to read each row from txt file
and used utl_file pacage to concat contents into a variable,
the variable datatype is varchar2(4000), so text length can't more than 4000 bytes,
but I wish get full text from txt file, How can I do?

Thans! Detlev.
I have a code :
PROCEDURE read_file( path in varchar2, filename in varchar2, msg in out varchar2) AS
data_line varchar2(4000);
ifile utl_file.file_type;
BEGIN
ifile := utl_file.fopen(path,filename,'R');
LOOP
utl_file.get_line( ifile, data_line);
msg := msg | | rtrim(data_line);
END LOOP;
utl_file.fclose(ifile);
EXCEPTION
WHEN no_data_found THEN
utl_file.fclose(ifile);
END;
My question is
1. The msg length can't more than 4000
2. I use utl_raw.cast_to_raw function, that can't cast varchar2 to raw if varchar2 length more than 2048
3. If I want to change the data type varchar2 to raw,
the utl_raw.concat function can't use Loop ....end loop clause,
So that only use utl_raw.concat(ra1, ra2,ra3,ra4,ra5, ... ra12)
I want to concat all line to a raw datatype from text file , How can I do?

Reg:(uncaught Exception :width/offset argument cannot be negative or exceed the text length)

hi all,
I just completed my application and import the COD File in Blackberry simulator 8300 . In my mobile after login click on button it throws error and exit the application.
It throws "uncaught Exception:width/offset argument cannot be negative or exceed the text length"
Kindly give suggestion

Hello,
You should ask in the
Lightswitch forum.
If this WAS in the Lightswitch forum, I suppose you should ask in Microsoft's ASP.Net forums:
http://forums.asp.net/
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Maximum Allowed Text Length for JTable Column

Can you please help me with a JTable Doubt
How do I set the Maximum Allowed Text Length for a Particular Column of a JTable?

Thanks a lot mate. I used the following
     class MaximumLengthFilter extends DocumentFilter {
               public void replace(DocumentFilter.FilterBypass fb, int offset, int length,
                         String text, AttributeSet attr) throws BadLocationException {
                    if ((fb.getDocument().getLength() + length) < 10)
                         fb.replace(offset, length, text, attr);
                    else
                         Toolkit.getDefaultToolkit().beep();
          }

Customizing legend text

Hi!
I've developed a graph in jdev by:
1. Creating a stub for some web service.
2. Creating a data control of the stub.
3. Dragging the data control into a jsp page as a graph.
4. Setting up the graph to show the correct data.
Now I want change the legend text, since it shows the attribute name of the Java object, which is rather ugly. Can anyone tell me how to customize the legend text or point me to some relevant documentation?
I'm using:
BI Beans Graph version [3.2.1.0.13]
JDev 10.1.2.1.0

Hi Sergio
No formatting is not the problem.
After validating my input fields i get the error message: "2 errors occured" as notification above the navigation bar
below both input fields i get my own field error texts in german.
Now i want to have the text "2 errors occured" in german too
thanks,
Jochen

Legend Text Wrapping

Is it possible to wrap the legend text for a combination chart? I am placing the legend at the bottom of the chart and have long series names that scroll out of the object box.

My current problem is similar to what was raised by Chris in September.
I report mass of data in the same stacked chart with different number of responses. The Legend, which was placed on the top of the chart appears always in one row regardless of 2 or 10 items (responses) are shown. In many cases the Legend line/band runs out of the object.
Line break on items does not help as they just break one item but not the full legend "band" into two lines. I supposed it will wrap automatically but it does not do so.
Do you have any idea / solution / tip for me?
It would be highly appreciated!
(I am on Engage 2008)
Cheers, Peter

FM to fix text length

Hi....
I've got a problem in Smartform where in if the firs column fields lenght(character type) is less it printing the second column in the space and the order of column entry is shuffling.....
My text length is 30 character long i've fixed it like &itab-text(30)& in text element........but when the text character is less that 20 chars i'm having the shuffling problem and the second column get fixed up the space and the order gets misplace.....i'm using tab stop for giving space between two columns and its fixed for every columns......i tried this my concatenating space when the text lenght is less than 20 chars....but still the same problem........and tried every thing now i just wonder do we have any FM to fix the lenght of text to achieve the result.......
Points wud be surely awarded.....Thxxxxxxxxxxxxx

hi,
may be this function module will helpful for u for fomating the text.
CALL FUNCTION 'FORMAT_TEXTLINES'
EXPORTING
cursor_column = 1
cursor_line = 1
endline = 99999
formatwidth = 45
linewidth = 45
startline = 1
language = sy-langu
*IMPORTING
*NEW_CURSOR_COLUMN =
*NEW_CURSOR_LINE =
TABLES
lines = g_tline
EXCEPTIONS
BOUND_ERROR = 1
OTHERS = 2
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Struts2:jsp:control Text length

I want to set limit for <s:property value="Text"/> in jsp .If i have Text which length is 50 ,here I want to display only 30 characters remaining charcters should be display like this '...'.How can i do this?
(Or) any other idea for set text length.
Thanks in advance.

Sry,by mistake i have post this question in this forum.Actually my environment is struts2 (jsp,struts2) .i want to post this question into JSP relevant forum.sry
Edited by: raj_java on Jan 9, 2013 12:43 AM

Web Form Cell Text Length

We have web forms in HFM that users will export to Excel and then import back to HFM. We have modified settings in HFM to allow cell text length up to 8000 characters. However, when the users import the form back to HFM the cell text is truncated to only the first 70 characters. It is possible to enter the additional characters directly into HFM, but that defeats the purpose of exporting the forms to Excel. Is there another setting to allow the import to pass all the characters?

As per my knowledge if a cell text is larger then 70 characters in HFM and we export the form in EXCEL it gets truncated. Same is the case when we try uploading data form from EXCEL having cell text lager than 70 characters.
This a bug. Till now i have not received any solution for this.
Varun

Legend text turns black when converting a .ppt to .pdf

I have a picture of an Excel graph pasted into Powerpoint as an Enhance Metafile. When I convert the .ppt to .pdf, the legend text in the graph turns into a black filled box. Can you tell me how to avoid this? Thanks!

This isn't the proper forum for that. This is for the free Reader application which does not convert files to PDF.
Depending on what you actually use to convert to PDF, you may need a Microsoft forum or the Adobe Acrobat forum.

How to re-size a overflow text frame based on the text length?

Hi ..
Is it possible to re-size a overflow text frame based on the text length?

Hello,
Please refer to forum post : http://forums.adobe.com/message/4828489#4828489
Regards,
Sachin

Legend text length 30

Similar Messages

Maybe you are looking for